2 files changed, 87 insertions, 130 deletions

diff --git a/en/handbook/README b/en/handbook/README
index 2cf8c7ef19..8b77853c34 100644
--- a/en/handbook/README
+++ b/en/handbook/README
@@ -478,3 +478,9 @@ for example,
 
      More redundant <para>..</para>'s removed.
 
+ 47. Removed white space after <title> and before </title>. Use two search and
+     replaces
+
+         \s-+</title>  ->  </title>
+         <title>\s-+   ->  <title>
+
diff --git a/en/handbook/handbook.sgml b/en/handbook/handbook.sgml
index 80356fe64b..203b730ba8 100644
--- a/en/handbook/handbook.sgml
+++ b/en/handbook/handbook.sgml
@@ -6933,8 +6933,7 @@ sio2: type 16550A</screen>
 	    
 	    <sect4
 	      id="printing-dev-ports">
-	      <title>Adding <filename>/dev</filename> Entries for the Ports
-	      </title>
+	      <title>Adding <filename>/dev</filename> Entries for the Ports</title>
 	      
 	      <para>Even though the kernel may support communication along a
 		serial or parallel port, you will still need a software
@@ -6989,8 +6988,7 @@ sio2: type 16550A</screen>
 	    
 	    <sect4
 	      id="printing-parallel-port-mode">
-	      <title>Setting the Communication Mode for the Parallel Port
-	      </title>
+	      <title>Setting the Communication Mode for the Parallel Port</title>
 	      
 	      <para>When you are using the parallel interface, you can choose
 		whether FreeBSD should use interrupt-driven or polled
@@ -7309,8 +7307,7 @@ printer:dv=/dev/ttyd2:br#19200:pa=none
 	  <sect3
 	    id="printing-printcap">
 	    <title>Enabling the Spooler: The
-	      <filename>/etc/printcap</filename> File
-	    </title>
+	      <filename>/etc/printcap</filename> File</title>
 	    
 	    <para>At this point, your printer should be hooked up, your
 	      kernel configured to communicate with it (if necessary), and you
@@ -9292,8 +9289,7 @@ cfA013rose dequeued
 	  
 	  <sect3
 	    id="printing-advanced-if-conversion">
-	    <title>Accommodating Plain Text Jobs on PostScript Printers
-	    </title>
+	    <title>Accommodating Plain Text Jobs on PostScript Printers</title>
 	    
 	    <para>If you are the only user of your computer and PostScript
 	      (or other language-based) printer, and you promise to never send
@@ -9387,8 +9383,7 @@ fi
 	  
 	  <sect3
 	    id="printing-advanced-ps">
-	    <title>Simulating PostScript on Non-PostScript Printers
-	    </title>
+	    <title>Simulating PostScript on Non-PostScript Printers</title>
 	    
 	    <para>PostScript is the <emphasis>de facto</emphasis>
 	      standard for high quality typesetting and printing. PostScript
@@ -9519,8 +9514,7 @@ exit 2
 	    </sect4>
 	    
 	    <sect4>
-	      <title>Which Conversions Filters Should I Install?
-	      </title>
+	      <title>Which Conversions Filters Should I Install?</title>
 	      
 	      <para>You should install the conversion filters you expect to
 		use. If you print a lot of DVI data, then a DVI conversion
@@ -9889,8 +9883,7 @@ exit 0
 	    <sect4
 	      id="printing-advanced-autoconv">
 	      <title>Automated Conversion: An Alternative To Conversion
-		Filters
-	      </title>
+		Filters</title>
 	      
 	      <para>All these conversion filters accomplish a lot for your
 		printing environment, but at the cost forcing the user to
@@ -15170,8 +15163,7 @@ disk            wd3     at wdc1 drive 1
 	  </sect3>
 	  
 	  <sect3>
-	    <title>Thanks to...
-	    </title>
+	    <title>Thanks to...</title>
 	    
 	    <para>Andrew Gordon for sending me an Adaptec 2320 controller and
 	      ESDI disk  for testing.</para>
@@ -15962,8 +15954,7 @@ options         SCSI_DELAY=15         #Be pessimistic about Joe SCSI device
 	    
 	    <sect4
 	      id="scsi-rogue-devices">
-	      <title>Rogue SCSI devices
-	      </title>
+	      <title>Rogue SCSI devices</title>
 	      
 	      <para>Although the SCSI standard tries to be complete and
 		concise, it is a complex standard and implementing things
@@ -16320,8 +16311,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	
 	<sect2
 	  id="hw-storage-controllers">
-	  <title>* Disk/tape controllers
-	  </title>
+	  <title>* Disk/tape controllers</title>
 	  
 	  
 	  <sect3>
@@ -16344,11 +16334,11 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	</sect2>
 	
 	<sect2>
-	  <title> Hard drives</title>
+	  <title>Hard drives</title>
 	  
 	  
 	  <sect3>
-	    <title> SCSI hard drives</title>
+	    <title>SCSI hard drives</title>
 	    
 	    <para><emphasis>Contributed by &a.asami;.<!-- <br> -->17 February
 		1998.</emphasis></para>
@@ -16366,7 +16356,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    
 	    <sect4>
-	      <title> Rotational speed</title>
+	      <title>Rotational speed</title>
 	      
 	      <para>Rotational speeds of SCSI drives sold today range from
 		around 4,500RPM to 10,000RPM. Most of them are either 5,400RPM
@@ -16431,7 +16421,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Form factor</title>
+	      <title>Form factor</title>
 	      
 	      <para>Most SCSI drives sold today are of 3.5" form factor. They
 		come in two different heights; 1.6" (<quote>half-height</quote>) or 1"
@@ -16444,7 +16434,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Interface</title>
+	      <title>Interface</title>
 	      
 	      <para>The majority of SCSI hard drives sold today are Ultra or
 		Ultra-wide SCSI. The maximum bandwidth of Ultra SCSI is
@@ -16489,14 +16479,14 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	</sect2>
 	
 	<sect2>
-	  <title> Tape drives</title>
+	  <title>Tape drives</title>
 	  
 	  <para><emphasis>Contributed by &a.jmb;.<!-- <br> -->2 July
 	      1996.</emphasis></para>
 	  
 	  
 	  <sect3>
-	    <title> General tape access commands</title>
+	    <title>General tape access commands</title>
 	    
 	    <para><citerefentry><refentrytitle>mt</refentrytitle><manvolnum>1</manvolnum></citerefentry> provides generic access to the tape
 	      drives. Some of the more common commands are
@@ -16507,7 +16497,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Controller Interfaces</title>
+	    <title>Controller Interfaces</title>
 	    
 	    <para>There are several different interfaces that support tape
 	      drives. The interfaces are SCSI, IDE, Floppy and Parallel Port.
@@ -16519,7 +16509,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	  </sect3>
 	  
 	  <sect3>
-	    <title> SCSI drives</title>
+	    <title>SCSI drives</title>
 	    
 	    <para>The <citerefentry><refentrytitle>st</refentrytitle><manvolnum>4</manvolnum></citerefentry> driver provides
 	      support for 8mm (Exabyte), 4mm (DAT: Digital Audio Tape), QIC
@@ -16536,7 +16526,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    
 	    <sect4>
-	      <title> 4mm (DAT: Digital Audio Tape)</title>
+	      <title>4mm (DAT: Digital Audio Tape)</title>
 	      
 	      <para><xref linkend="hw-storage-python" remap="Archive
 		  Python"></para>
@@ -16565,7 +16555,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> 8mm (Exabyte)</title>
+	      <title>8mm (Exabyte)</title>
 	      
 	      <para><xref linkend="hw-storage-exb8200"
 		  remap="EXB-8200"></para>
@@ -16579,7 +16569,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> QIC (Quarter-Inch Cartridge)</title>
+	      <title>QIC (Quarter-Inch Cartridge)</title>
 	      
 	      <para><xref linkend="hw-storage-anaconda" remap="Archive
 		  Ananconda 2750"></para>
@@ -16608,7 +16598,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> DLT (Digital Linear Tape)</title>
+	      <title>DLT (Digital Linear Tape)</title>
 	      
 	      <para><xref linkend="hw-storage-dectz87" remap="Digital
 		  TZ87"></para>
@@ -16616,7 +16606,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Mini-Cartridge</title>
+	      <title>Mini-Cartridge</title>
 	      
 	      <para><xref linkend="hw-storage-ctms3200" remap="Conner CTMS
 		  3200"></para>
@@ -16627,7 +16617,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Autoloaders/Changers</title>
+	      <title>Autoloaders/Changers</title>
 	      
 	      <para><xref linkend="hw-storage-hp1553a" remap="Hewlett-Packard
 		  HP C1553A Autoloading DDS2"></para>
@@ -16642,7 +16632,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Floppy drives</title>
+	    <title>Floppy drives</title>
 	    
 	    <para><xref linkend="hw-storage-conner420r" remap="Conner
 		420R"></para>
@@ -16656,13 +16646,12 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Detailed Information </title>
+	    <title>Detailed Information</title>
 	    
 	    
 	    <sect4
 	      id="hw-storage-anaconda">
-	      <title>
-		Archive Anaconda 2750</title>
+	      <title>Archive Anaconda 2750</title>
 	      
 	      <para>The boot message identifier for this drive is
 		<literal>ARCHIVE ANCDA 2750 28077 -003 type 1 removable SCSI
@@ -16721,8 +16710,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-python">
-	      <title>
-		Archive Python</title>
+	      <title>Archive Python</title>
 	      
 	      <para>The boot message identifier for this drive is
 		<literal>ARCHIVE Python 28454-XXX4ASB</literal> <literal>type
@@ -16744,8 +16732,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-viper60">
-	      <title>
-		Archive Viper 60</title>
+	      <title>Archive Viper 60</title>
 	      
 	      <para>The boot message identifier for this drive is
 		<literal>ARCHIVE VIPER 60 21116 -007</literal> <literal>type 1
@@ -16765,8 +16752,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-viper150">
-	      <title>
-		Archive Viper 150</title>
+	      <title>Archive Viper 150</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>ARCHIVE
 		VIPER 150 21531 -004</literal> <literal>Archive Viper 150 is a known rogue</literal>
@@ -16808,8 +16794,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-viper2525">
-	      <title>
-		Archive Viper 2525</title>
+	      <title>Archive Viper 2525</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>ARCHIVE
 		VIPER 2525 25462 -011</literal> <literal>type 1 removable SCSI 1</literal></para>
@@ -16832,8 +16817,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-conner420r">
-	      <title>
-		Conner 420R</title>
+	      <title>Conner 420R</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>Conner
 		tape</literal>.</para>
@@ -16853,8 +16837,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-ctms3200">
-	      <title>
-		Conner CTMS 3200</title>
+	      <title>Conner CTMS 3200</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>CONNER CTMS
 		3200 7.00</literal> <literal>type 1 removable SCSI 2</literal>.</para>
@@ -16873,8 +16856,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-dectz87">
-	      <title>
-		<ulink
+	      <title><ulink
 		  URL="http://www.digital.com/info/Customer-Update/931206004.txt.html">DEC TZ87</ulink></title>
 	      
 	      <para>The boot message identifier for this drive is <literal>DEC TZ87
@@ -16899,8 +16881,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-exb2501">
-	      <title>
-		<ulink
+	      <title><ulink
 		  URL="http://www.Exabyte.COM:80/Products/Minicartridge/2501/Rfeatures.html">Exabyte EXB-2501</ulink></title>
 	      
 	      <para>The boot message identifier for this drive is <literal>EXABYTE
@@ -16951,7 +16932,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-exb8200">
-	      <title> Exabyte EXB-8200</title>
+	      <title>Exabyte EXB-8200</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>EXABYTE
 		EXB-8200 252X</literal> <literal>type 1 removable SCSI 1</literal></para>
@@ -16980,8 +16961,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-exb8500">
-	      <title>
-		Exabyte EXB-8500</title>
+	      <title>Exabyte EXB-8500</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>EXABYTE
 		EXB-8500-85Qanx0 0415</literal> <literal>type 1 removable SCSI 2</literal></para>
@@ -16998,8 +16978,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-exb8505">
-	      <title>
-		<ulink
+	      <title><ulink
 		  URL="http://www.Exabyte.COM:80/Products/8mm/8505XL/Rfeatures.html">Exabyte EXB-8505</ulink></title>
 	      
 	      <para>The boot message identifier for this drive is <literal>EXABYTE
@@ -17020,8 +16999,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-hp1533a">
-	      <title>
-		Hewlett-Packard HP C1533A</title>
+	      <title>Hewlett-Packard HP C1533A</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>HP C1533A
 		9503</literal> <literal>type 1 removable SCSI 2</literal>.</para>
@@ -17106,8 +17084,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-hp1534a">
-	      <title>
-		Hewlett-Packard HP 1534A</title>
+	      <title>Hewlett-Packard HP 1534A</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>HP HP35470A
 		T503</literal> <literal>type 1 removable SCSI 2</literal> <literal>Sequential-Access density code
@@ -17140,8 +17117,7 @@ options        "TUNE_1542"             #dynamic tune of bus DMA speed
 	    
 	    <sect4
 	      id="hw-storage-hp1553a">
-	      <title>
-		Hewlett-Packard HP C1553A Autoloading DDS2</title>
+	      <title>Hewlett-Packard HP C1553A Autoloading DDS2</title>
 	      
 	      <para>The boot message identifier for this drive is "".</para>
 	      
@@ -17212,8 +17188,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-hp35450a">
-	      <title>
-		Hewlett-Packard HP 35450A</title>
+	      <title>Hewlett-Packard HP 35450A</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>HP HP35450A
 		-A C620</literal> <literal>type 1 removable SCSI 2</literal> <literal>Sequential-Access density
@@ -17233,8 +17208,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-hp35470a">
-	      <title>
-		Hewlett-Packard HP 35470A</title>
+	      <title>Hewlett-Packard HP 35470A</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>HP HP35470A
 		9 09</literal> <literal>type 1 removable SCSI 2</literal></para>
@@ -17264,8 +17238,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-hp35480a">
-	      <title>
-		Hewlett-Packard HP 35480A</title>
+	      <title>Hewlett-Packard HP 35480A</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>HP HP35480A
 		1009</literal> <literal>type 1 removable SCSI 2</literal> <literal>Sequential-Access density
@@ -17304,8 +17277,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-sdt5000">
-	      <title>
-		<ulink
+	      <title><ulink
 		  URL="http://www.sel.sony.com/SEL/ccpg/storage/tape/t5000.html">Sony SDT-5000</ulink></title>
 	      
 	      <para>There are at least two significantly different models: one
@@ -17340,8 +17312,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tandberg3600">
-	      <title>
-		Tandberg TDC 3600</title>
+	      <title>Tandberg TDC 3600</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>TANDBERG
 		TDC 3600 =08:</literal> <literal>type 1 removable SCSI 2</literal></para>
@@ -17367,8 +17338,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tandberg3620">
-	      <title>
-		Tandberg TDC 3620</title>
+	      <title>Tandberg TDC 3620</title>
 	      
 	      <para>This is very similar to the <xref
 		  linkend="hw-storage-tandberg3600" remap="Tandberg TDC 3600">
@@ -17380,8 +17350,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tandberg4222">
-	      <title>
-		Tandberg TDC 4222</title>
+	      <title>Tandberg TDC 4222</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>TANDBERG
 		TDC 4222 =07</literal> <literal>type 1 removable SCSI 2</literal></para>
@@ -17411,8 +17380,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-wangtek5525es">
-	      <title>
-		Wangtek 5525ES</title>
+	      <title>Wangtek 5525ES</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>WANGTEK
 		5525ES SCSI REV7 3R1</literal> <literal>type 1 removable SCSI 1</literal> <literal>density code
@@ -17446,8 +17414,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-wangtek6200">
-	      <title>
-		Wangtek 6200</title>
+	      <title>Wangtek 6200</title>
 	      
 	      <para>The boot message identifier for this drive is <literal>WANGTEK
 		6200-HS 4B18</literal> <literal>type 1 removable SCSI 2</literal> <literal>Sequential-Access
@@ -17472,7 +17439,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	</sect2>
 	
 	<sect2>
-	  <title> CD-ROM drives</title>
+	  <title>CD-ROM drives</title>
 	  
 	  <para><emphasis>Contributed by &a.obrien;.<!-- <br> -->23 November
 	      1997.</emphasis></para>
@@ -17513,7 +17480,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	
 	<sect2
 	  id="hw-storage-tapebackups">
-	  <title> Tapes and backups</title>
+	  <title>Tapes and backups</title>
 	  
 	  
 	  <sect3>
@@ -17523,13 +17490,12 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Tape Media</title>
+	    <title>Tape Media</title>
 	    
 	    
 	    <sect4
 	      id="hw-storage-tapebackups-4mm">
-	      <title>
-		4mm (DDS: Digital Data Storage)</title>
+	      <title>4mm (DDS: Digital Data Storage)</title>
 	      
 	      <para>4mm tapes are replacing QIC as the workstation backup
 		media of choice. This trend accelerated greatly when Conner
@@ -17559,8 +17525,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tapebackups-8mm">
-	      <title>
-		8mm (Exabyte)</title>
+	      <title>8mm (Exabyte)</title>
 	      
 	      <para>8mm tapes are the most common SCSI tape drives; they are
 		the best choice of exchanging tapes. Nearly every site has an
@@ -17591,8 +17556,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tapebackups-qic">
-	      <title>
-		QIC</title>
+	      <title>QIC</title>
 	      
 	      <para>QIC-150 tapes and drives are, perhaps, the most common
 		tape drive and media around. QIC tape drives are the least
@@ -17635,16 +17599,14 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	    
 	    <sect4
 	      id="hw-storage-tapebackups-mini">
-	      <title>
-		* Mini-Cartridge</title>
+	      <title>* Mini-Cartridge</title>
 
 	      <para></para>
 	    </sect4>
 	    
 	    <sect4
 	      id="hw-storage-tapebackups-dlt">
-	      <title>
-		DLT</title>
+	      <title>DLT</title>
 	      
 	      <para>DLT has the fastest data transfer rate of all the drive
 		types listed here. The 1/2" (12.5mm) tape is contained in a
@@ -17675,7 +17637,7 @@ scsi -f $2 -s 100 -c "1b 0 0 $cdb3 $cdb4 $cdb5"
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Using a new tape for the first time</title>
+	    <title>Using a new tape for the first time</title>
 	    
 	    <para>The first time that you try to read or write a new,
 	      completely blank tape, the operation will fail. The console
@@ -17710,7 +17672,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	  </sect3>
 	  
 	  <sect3>
-	    <title> Backup Programs</title>
+	    <title>Backup Programs</title>
 	    
 	    <para>The three major programs are <citerefentry><refentrytitle>dump</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
 	      <citerefentry><refentrytitle>tar</refentrytitle><manvolnum>1</manvolnum></citerefentry>, and
@@ -17718,7 +17680,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    
 	    
 	    <sect4>
-	      <title> Dump and Restore</title>
+	      <title>Dump and Restore</title>
 	      
 	      <para><citerefentry><refentrytitle>dump</refentrytitle><manvolnum>8</manvolnum></citerefentry> and
 		<citerefentry><refentrytitle>restore</refentrytitle><manvolnum>8</manvolnum></citerefentry> are the traditional Unix backup
@@ -17760,7 +17722,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Tar</title>
+	      <title>Tar</title>
 	      
 	      <para><citerefentry><refentrytitle>tar</refentrytitle><manvolnum>1</manvolnum></citerefentry> also dates back to Version 6 of
 		ATT Unix (circa 1975). <citerefentry><refentrytitle>tar</refentrytitle><manvolnum>1</manvolnum></citerefentry> operates in
@@ -17785,7 +17747,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Cpio</title>
+	      <title>Cpio</title>
 	      
 	      <para><citerefentry><refentrytitle>cpio</refentrytitle><manvolnum>1</manvolnum></citerefentry> is the original Unix file
 		interchange tape program for magnetic media.
@@ -17805,7 +17767,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Pax</title>
+	      <title>Pax</title>
 	      
 	      <para><citerefentry><refentrytitle>pax</refentrytitle><manvolnum>1</manvolnum></citerefentry> is IEEE/POSIX's answer to
 		<command>tar</command> and <command>cpio</command>. Over the years the various
@@ -17847,7 +17809,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Do nothing</title>
+	      <title>Do nothing</title>
 	      
 	      <para><quote>Do nothing</quote> is not a computer program, but it is the most
 		widely used backup strategy. There are no initial costs.
@@ -17872,7 +17834,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    </sect4>
 	    
 	    <sect4>
-	      <title> Which Backup Program is Best?</title>
+	      <title>Which Backup Program is Best?</title>
 	      
 	      <para><citerefentry><refentrytitle>dump</refentrytitle><manvolnum>8</manvolnum></citerefentry> <emphasis>Period.</emphasis>
 		Elizabeth D. Zwicky torture tested all the backup programs
@@ -17897,7 +17859,7 @@ st0(ncr1:4:0):  Logical unit is in process of becoming ready</screen>
 	    
 	    
 	    <sect4>
-	      <title> Before the Disaster</title>
+	      <title>Before the Disaster</title>
 	      
 	      <para>There are only four steps that you need to perform in
 		preparation for any disaster that may occur.</para>
@@ -21015,8 +20977,7 @@ domain <replaceable>bar.com</replaceable>
 	  
 	  <sect3
 	    id="userppp-staticIP">
-	    <title>PPP and Static IP addresses
-	    </title>
+	    <title>PPP and Static IP addresses</title>
 	    
 	    <para>You will need to create a configuration file called
 	      <filename>/etc/ppp/ppp.conf</filename>. It should look similar
@@ -21220,8 +21181,7 @@ protocol: ppp</screen>
 	  
 	  <sect3
 	    id="userppp-dynamicIP">
-	    <title>PPP and Dynamic IP addresses
-	    </title>
+	    <title>PPP and Dynamic IP addresses</title>
 	    
 	    <para>If your service provider does not assign static IP numbers,
 	      <command>ppp</command> can be configured to negotiate
@@ -21548,8 +21508,7 @@ mary:
 	      
 	      <sect5
 		id="userppp-mgetty">
-		<title><command>mgetty</command> and AutoPPP
-		</title>
+		<title><command>mgetty</command> and AutoPPP</title>
 		
 		<para>Configuring and compiling <command>mgetty</command> with the <literal>AUTO_PPP</literal>
 		  option enabled allows <command>mgetty</command> to detect the LCP phase of PPP
@@ -21650,8 +21609,7 @@ default:
 	  
 	  <sect3
 	    id="userppp-PAPnCHAP">
-	    <title>PAP and CHAP authentication
-	    </title>
+	    <title>PAP and CHAP authentication</title>
 	    
 	    <para>Some ISPs set their system up so that the authentication
 	      part of your connection is done using either of the PAP or CHAP
@@ -21775,8 +21733,7 @@ default:
 	
 	<sect2
 	  id="userppp-final">
-	  <title>Final system configuration
-	  </title>
+	  <title>Final system configuration</title>
 	  
 	  <para>You now have <command>ppp</command> configured, but there are a few more things
 	    to do before it is ready to work. They all involve editing the
@@ -24650,7 +24607,7 @@ foo.bar                  MX  10	smtp.smalliap.com	; your mailhost
 	
 	<sect2
 	  id="sendmailuucp">
-	  <title> Setting up UUCP.</title>
+	  <title>Setting up UUCP.</title>
 	  
 	  <para><emphasis>Stolen from the FAQ.</emphasis></para>
 	  
@@ -27655,8 +27612,7 @@ cvs-crypto
 	
 	<sect2
 	  id="contrib-general">
-	  <title>Bug reports and general commentary
-	  </title>
+	  <title>Bug reports and general commentary</title>
 	  
 	  <para>An idea or suggestion of <emphasis>general</emphasis>
 	    technical interest should be mailed to the &a.hackers;. Likewise,
@@ -28204,7 +28160,7 @@ THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 # Date created:        5 December 1994
 # Whom:                asami
 #
-# $Id: handbook.sgml,v 1.46 1998-10-26 23:49:56 nik Exp $
+# $Id: handbook.sgml,v 1.47 1998-10-26 23:50:32 nik Exp $
 #
        
 DISTNAME=      oneko-1.1b
@@ -32389,8 +32345,7 @@ pre-install:
     
     <chapter
       id="policies">
-      <title>Source Tree Guidelines and Policies
-      </title>
+      <title>Source Tree Guidelines and Policies</title>
       
       <para><emphasis>Contributed by &a.phk;.</emphasis></para>
       
@@ -32400,8 +32355,7 @@ pre-install:
       
       <sect1
 	id="policies-maintainer">
-	<title><makevar>MAINTAINER</makevar> on Makefiles
-	</title>
+	<title><makevar>MAINTAINER</makevar> on Makefiles</title>
 	
 	<para>June 1996.</para>
 	
@@ -32613,8 +32567,7 @@ obrien@freebsd.org - 30 March 1997
       
       <sect1
 	id="policies-shlib">
-	<title>Shared Libraries
-	</title>
+	<title>Shared Libraries</title>
 	
 	<para><emphasis>Contributed by &a.asami;, &a.peter;, and
 	    &a.obrien;.<!-- <br> --> 9 December 1996.</emphasis></para>
@@ -39410,8 +39363,7 @@ help
       
       <sect1
 	id="staff-doc">
-	<title>The FreeBSD Documentation Project
-	</title>
+	<title>The FreeBSD Documentation Project</title>
 	
 	<para>The <ulink URL="http://www.freebsd.org/docproj.html">FreeBSD
 	    Documentation Project</ulink> is responsible for a number of
@@ -39662,8 +39614,7 @@ help
 	
 	
 	<sect2>
-	  <title>FreeBSD Security Officer <email>security-officer@freebsd.org</email>
-	  </title>
+	  <title>FreeBSD Security Officer <email>security-officer@freebsd.org</email></title>
 	  
 	  <programlisting>
 FreeBSD Security Officer &lt;security-officer@freebsd.org&gt;