diff options
Diffstat (limited to 'zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml')
| -rw-r--r-- | zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml b/zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml index 1d96d1ffa4..68b0a2c6a2 100644 --- a/zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml +++ b/zh_CN.GB2312/books/handbook/advanced-networking/chapter.sgml @@ -2,7 +2,7 @@ The FreeBSD Documentation Project The FreeBSD Chinese Documentation Project - Original revision: 1.420 + Original revision: 1.422 $FreeBSD$ --> @@ -790,6 +790,11 @@ route_net2="-net 192.168.1.0/24 192.168.1.1"</programlisting> <programlisting>wlan_scan_ap_load="YES" wlan_scan_sta_load="YES"</programlisting> + <note> + <para>&os; 7.X 需要 <literal>wlan_scan_ap</literal> + 和 <literal>wlan_scan_sta</literal> 模块， + 而其他的版本则无需加载。</para> + </note> <para>除此之外， 您还需要提供您希望使用的安全协议所需的加密支持模块。 这些模块是设计来让 &man.wlan.4; 模块根据需要自动加载的， @@ -817,13 +822,18 @@ wlan_tkip_load="YES"</programlisting> <programlisting>device ath # Atheros IEEE 802.11 wireless network driver device ath_hal # Atheros Hardware Access Layer -device ath_rate_sample # John Bicket's SampleRate control algorithm. -device wlan # 802.11 support (Required) +options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors +device ath_rate_sample # SampleRate tx rate control for ath +device wlan # 802.11 support device wlan_scan_ap # 802.11 AP mode scanning device wlan_scan_sta # 802.11 STA mode scanning -device wlan_wep # WEP crypto support for 802.11 devices -device wlan_ccmp # AES-CCMP crypto support for 802.11 devices -device wlan_tkip # TKIP and Michael crypto support for 802.11 devices</programlisting> +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support</programlisting> + + <para>&os; 7.X 需要 <literal>wlan_sacn_ap</literal> 和 + <literal>wlan_scan_sta</literal> 配置选项， + 而其他的版本无需添加。</para> <para>将这些信息写到内核编译配置文件中之后， 您需要重新编译内核， 并重新启动运行 &os; |