ports/comms/uartlirc/Makefile, branch 7-eol FreeBSD ports tree https://cgit-dev.freebsd.org/ports/atom?h=7-eol 2012-09-09T13:54:16Z Looks like I never tested irrecord... This patch fixes it. 2012-09-09T13:54:16Z Juergen Lock nox@FreeBSD.org 2012-09-09T13:54:16Z urn:sha1:986c8e7401f8211bce2c28cdb36a7085d491c6ec Mark broken on powerpc and sparc64: "error: uart.h: No such file or directory". 2012-05-27T06:37:36Z Mark Linimon linimon@FreeBSD.org 2012-05-27T06:37:36Z urn:sha1:e488dd0fc9dfd2c414626454417389a56cbf35ec Hat: portmgr This is a driver for "homebrew" type serial LIRC reveivers as 2012-05-13T16:06:05Z Juergen Lock nox@FreeBSD.org 2012-05-13T16:06:05Z urn:sha1:6a1d7c932a5e0648085597022e2ded39f9fff06f described here: http://lirc.org/receivers.html It overrides the `normal' uart(4) driver, if you have that driver already loaded or statically in your kernel (like it is in GENERIC) then you need to load uartlirc.ko from loader.conf(5) (or manually via the loader prompt) for the override to work. The driver provides a /dev/lircX node for each serial port in addition to the normal tty nodes /dev/cuauX etc, so you can still use other serial ports normally should you have more than one. Note: it only supports PCI/motherboard serial ports not ones connected via USB, for USB you can use mceusb hardware supported via webcamd, or FTDI hardware supported by comms/lirc natively via libftdi, see: http://wiki.freebsd.org/WebcamCompat and the comms/lirc port's pkg-message. WWW: http://forums.freebsd.org/showthread.php?p=175029