18 files changed, 138 insertions, 78 deletions

diff --git a/www/squid/Makefile b/www/squid/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid/Makefile
+++ b/www/squid/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid/distinfo b/www/squid/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid/distinfo
+++ b/www/squid/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid/pkg-install b/www/squid/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid/pkg-install
+++ b/www/squid/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1
diff --git a/www/squid25/Makefile b/www/squid25/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid25/Makefile
+++ b/www/squid25/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid25/distinfo b/www/squid25/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid25/distinfo
+++ b/www/squid25/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid25/pkg-install b/www/squid25/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid25/pkg-install
+++ b/www/squid25/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1
diff --git a/www/squid26/Makefile b/www/squid26/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid26/Makefile
+++ b/www/squid26/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid26/distinfo b/www/squid26/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid26/distinfo
+++ b/www/squid26/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid26/pkg-install b/www/squid26/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid26/pkg-install
+++ b/www/squid26/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1
diff --git a/www/squid27/Makefile b/www/squid27/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid27/Makefile
+++ b/www/squid27/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid27/distinfo b/www/squid27/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid27/distinfo
+++ b/www/squid27/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid27/pkg-install b/www/squid27/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid27/pkg-install
+++ b/www/squid27/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1
diff --git a/www/squid30/Makefile b/www/squid30/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid30/Makefile
+++ b/www/squid30/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid30/distinfo b/www/squid30/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid30/distinfo
+++ b/www/squid30/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid30/pkg-install b/www/squid30/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid30/pkg-install
+++ b/www/squid30/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1
diff --git a/www/squid31/Makefile b/www/squid31/Makefile
index 6eab93fef5b9..42c7294ea19c 100644
--- a/www/squid31/Makefile
+++ b/www/squid31/Makefile
@@ -29,7 +29,7 @@
 
 PORTNAME=	squid
 PORTVERSION=	2.5.5
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	www
 MASTER_SITES=	\
 		ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
@@ -50,7 +50,8 @@ PATCHFILES=	squid-2.5.STABLE5-ntlm_assert.patch \
 		squid-2.5.STABLE5-CONNECT_timeout.patch \
 		squid-2.5.STABLE5-cache_swap_log.patch \
 		squid-2.5.STABLE5-ntlm_warning.patch \
-		squid-2.5.STABLE5-rfc1035NameUnpack.patch
+		squid-2.5.STABLE5-rfc1035NameUnpack.patch \
+		squid-2.5.STABLE5-digest_blank.patch
 PATCH_DIST_STRIP=	-p1
 
 MAINTAINER=	tmseck@netcologne.de
@@ -90,8 +91,8 @@ OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
 		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
 		SQUID_PF "Enable transp. proxy support using PF" off \
 		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
-		SQUID_AUFS "Enable the aufs store type" off \
-		SQUID_COSS "Enable the COSS store type" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
 		SQUID_STACKTRACES "Create backtraces on fatal errors" off
 
 PLIST_FILES=	etc/rc.d/squid.sh etc/squid/mib.txt etc/squid/mime.conf.default \
@@ -125,21 +126,21 @@ CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
 			--enable-external-acl-helpers="${external_acl}" \
 			--enable-ntlm-auth-helpers="SMB winbind"
 
-# Selection of store types:
+# Selection of storage schemes:
 
-store_types=	ufs diskd null
+storage_schemes=	ufs diskd null
 .if defined(WITH_SQUID_AUFS)
-store_types+=	aufs
+storage_schemes+=	aufs
 # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
 CONFIGURE_ARGS+=	--enable-async-io \
 			--with-pthreads
 CFLAGS+=	${PTHREAD_CFLAGS}
 .endif
 .if defined(WITH_SQUID_COSS)
-store_types+=	coss
+storage_schemes+=	coss
 CONFIGURE_ARGS+=	--with-aio
 .endif
-CONFIGURE_ARGS+=	--enable-storeio="${store_types}"
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
 
 # Other options set via 'make config':
 
@@ -156,7 +157,7 @@ CONFIGURE_ARGS+=	--enable-carp
 # we need to .include bsd.openssl.mk manually here because USE_OPENSSL only
 # works when it is defined before bsd.port{.pre}.mk is .included and this is
 # not possible when using OPTIONS
-.include "${PORTSDIR}/Mk/bsd.openssl.mk" 
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
 CONFIGURE_ARGS+=	--enable-ssl \
 			--with-openssl="${OPENSSLBASE}"
 CFLAGS+=	-I${OPENSSLINC}
diff --git a/www/squid31/distinfo b/www/squid31/distinfo
index cfbdf43b1057..bf67bc312f7a 100644
--- a/www/squid31/distinfo
+++ b/www/squid31/distinfo
@@ -18,3 +18,5 @@ MD5 (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 57ec2b3e27dcff757412d6d0a6
 SIZE (squid2.5/squid-2.5.STABLE5-ntlm_warning.patch) = 900
 MD5 (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = e3640442452f77762df5b20380aeb334
 SIZE (squid2.5/squid-2.5.STABLE5-rfc1035NameUnpack.patch) = 685
+MD5 (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 9eec94b95e52f26aece4568af4a2e5ae
+SIZE (squid2.5/squid-2.5.STABLE5-digest_blank.patch) = 4598
diff --git a/www/squid31/pkg-install b/www/squid31/pkg-install
index 4eaff14137dd..c8eecd888d70 100644
--- a/www/squid31/pkg-install
+++ b/www/squid31/pkg-install
@@ -7,6 +7,11 @@ PATH=/bin:/usr/bin:/usr/sbin
 pkgname=$1
 squid_base=${PKG_PREFIX:-/usr/local}/squid
 squid_confdir=${PKG_PREFIX:-/usr/local}/etc/squid
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
 : ${squid_user:=squid}
 : ${squid_group:=squid}
 squid_gid=100
@@ -42,9 +47,11 @@ PRE-INSTALL)
 
 	if ! pw usershow ${squid_user} -q >/dev/null ; then
 		echo "There is no account '${squid_user}' on this system, so I will try to create it:"
-		if ! pw useradd ${squid_user} -u ${squid_uid} -q \
-	  	    -c "squid caching-proxy pseudo user" -g ${squid_group} \
-		    -d "${squid_base}" -s "/sbin/nologin" -h - ; then
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
 			echo "Failed to create user '${squid_user}'!" >&2
 			echo "Please create it manually." >&2
 			exit 1