14 files changed, 272 insertions, 0 deletions

diff --git a/comms/Makefile b/comms/Makefile
index 17b52a4ebc43..009807e38700 100644
--- a/comms/Makefile
+++ b/comms/Makefile
@@ -142,6 +142,7 @@
     SUBDIR += py-serial
     SUBDIR += pyla
     SUBDIR += qico
+    SUBDIR += qpage
     SUBDIR += qrq
     SUBDIR += qsstv
     SUBDIR += qt5-connectivity
diff --git a/comms/qpage/Makefile b/comms/qpage/Makefile
new file mode 100644
index 000000000000..7442d0c016b6
--- /dev/null
+++ b/comms/qpage/Makefile
@@ -0,0 +1,74 @@
+# Created by: joes@seaport.net
+# $FreeBSD$
+
+PORTNAME=	qpage
+PORTVERSION=	3.3
+PORTREVISION=	8
+CATEGORIES=	comms
+MASTER_SITES=	http://www.qpage.org/download/
+MASTER_SITES=	http://tomiii.com/qpage/qpage.org/download/
+
+MAINTAINER=	rand@iteris.com
+COMMENT=	SNPP client/server for sending messages to an alphanumeric pager
+
+USES=tar:Z
+USE_RC_SUBR=	qpage
+GNU_CONFIGURE=	yes
+
+OPTIONS_DEFINE=	IDENT_PATCH
+IDENT_PATCH_DESC=	Disable libwrap ident lookups
+
+IDENT_PATCH_EXTRA_PATCHES=${FILESDIR}/libwrap_ident_patch-srvrsnpp.c
+
+.if !defined(WITH_QPAGE_SYSLOG_FACILITY) || !defined(WITH_QPAGE_USER)
+.if !defined(WITH_QPAGE_SYSLOG_FACILITY) && !defined(WITH_QPAGE_USER)
+_QPAGE_MSG=	You may set the following configuration options:
+.else
+_QPAGE_MSG=	The following additional configuration options are available:
+.endif
+.if !defined(WITH_QPAGE_SYSLOG_FACILITY)
+WITH_QPAGE_SYSLOG_FACILITY=	LOG_DAEMON
+_QPAGE_SYSLOG_MSG=1
+.endif
+.if !defined(WITH_QPAGE_USER)
+WITH_QPAGE_USER=	uucp
+_QPAGE_USER_MSG=1
+.endif
+pre-patch:
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} ${_QPAGE_MSG}
+	@if [ -n "${_QPAGE_SYSLOG_MSG}" ]; then \
+		${ECHO_MSG} ""; \
+		${ECHO_MSG} "  WITH_QPAGE_SYSLOG_FACILITY=syslog_facility"; \
+		${ECHO_MSG} "      Default is LOG_DAEMON"; \
+	fi
+	@if [ -n "${_QPAGE_USER_MSG}" ]; then \
+		${ECHO_MSG} ""; \
+		${ECHO_MSG} "  WITH_QPAGE_USER=userid"; \
+		${ECHO_MSG} "      Default is \"uucp\"; recommended that user be in group \"dialer\""; \
+	fi
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} "Press ^C now to stop the build and set make options."
+	@${ECHO_MSG} "You may find it necessary to 'make clean' before restarting the build."
+	@sleep 2
+.endif
+
+post-patch:
+	${REINPLACE_CMD} -e 's,%%PREFIX%%,${PREFIX},g' \
+		${WRKSRC}/qpage.man \
+		${WRKSRC}/config.input \
+		${WRKSRC}/config.h.in
+	${REINPLACE_CMD} \
+		-e 's,%%WITH_QPAGE_SYSLOG_FACILITY%%,${WITH_QPAGE_SYSLOG_FACILITY},' \
+		-e 's,%%WITH_QPAGE_USER%%,${WITH_QPAGE_USER},' \
+		${WRKSRC}/config.input
+
+do-install:
+	${INSTALL_PROGRAM} ${WRKSRC}/qpage ${STAGEDIR}${PREFIX}/bin
+	${INSTALL_MAN} ${WRKSRC}/qpage.man \
+		${STAGEDIR}${MAN1PREFIX}/man/man1/qpage.1
+	${INSTALL_DATA} ${WRKSRC}/example.cf \
+		${STAGEDIR}${PREFIX}/etc/qpage.conf.sample
+	${MKDIR} ${STAGEDIR}/var/spool/qpage
+
+.include <bsd.port.mk>
diff --git a/comms/qpage/distinfo b/comms/qpage/distinfo
new file mode 100644
index 000000000000..7dc615e97df7
--- /dev/null
+++ b/comms/qpage/distinfo
@@ -0,0 +1,2 @@
+SHA256 (qpage-3.3.tar.Z) = 0bbecd2908380c5d28b8beeee0d0238854162128db5ef4ea603614d52ee7d24c
+SIZE (qpage-3.3.tar.Z) = 225689
diff --git a/comms/qpage/files/libwrap_ident_patch-srvrsnpp.c b/comms/qpage/files/libwrap_ident_patch-srvrsnpp.c
new file mode 100644
index 000000000000..8cd51a09b2f7
--- /dev/null
+++ b/comms/qpage/files/libwrap_ident_patch-srvrsnpp.c
@@ -0,0 +1,16 @@
+--- srvrsnpp.c.orig	2008-10-20 10:30:57.539127452 -0400
++++ srvrsnpp.c	2008-10-20 10:35:43.096529509 -0400
+@@ -1066,7 +1066,12 @@
+ 
+ 		fromhost(&request);
+ 
+-		ptr = eval_user(&request);
++		/*
++		** If we aren't doing an ident request, don't ask
++		** TCP Wrappers to do it either
++		*/
++		if (IdentTimeout) ptr = eval_user(&request);
++		else ptr = NULL;
+ 
+ 		if (ptr && strcmp(ptr, STRING_UNKNOWN) != 0)
+ 			p->ident = strdup(ptr);
diff --git a/comms/qpage/files/patch-config.c b/comms/qpage/files/patch-config.c
new file mode 100644
index 000000000000..7e0d3406ba2d
--- /dev/null
+++ b/comms/qpage/files/patch-config.c
@@ -0,0 +1,10 @@
+--- config.c.orig	1999-01-02 03:14:50 UTC
++++ config.c
+@@ -1407,7 +1407,6 @@ free_pagers(pager_t *list)
+ 		my_free(list->name);
+ 		my_free(list->text);
+ 		my_free(list->pagerid);
+-		my_free(list->service);
+ 		free(list);
+ 	}
+ }
diff --git a/comms/qpage/files/patch-config.h.in b/comms/qpage/files/patch-config.h.in
new file mode 100644
index 000000000000..5240e0a46f5b
--- /dev/null
+++ b/comms/qpage/files/patch-config.h.in
@@ -0,0 +1,11 @@
+--- config.h.in.orig	1998-07-26 19:38:35 UTC
++++ config.h.in
+@@ -17,7 +17,7 @@
+ #undef SNPP_SERVER_FILE
+ 
+ /* Define as the location of the qpage configuration file.  */
+-#define QPAGE_CONFIG "/etc/qpage.cf"
++#define QPAGE_CONFIG "/usr/local/etc/qpage.conf"
+ 
+ /* Define as the location of the lock directory.  */
+ #undef DEFAULT_LOCKDIR
diff --git a/comms/qpage/files/patch-config.input b/comms/qpage/files/patch-config.input
new file mode 100644
index 000000000000..8bd72bc84a16
--- /dev/null
+++ b/comms/qpage/files/patch-config.input
@@ -0,0 +1,29 @@
+--- config.input.orig	1998-11-05 06:05:36 UTC
++++ config.input
+@@ -20,7 +20,7 @@
+ # See the QuickPage documentation for complete details about
+ # the syntax of the configuration file.
+ #
+-QPAGE_CONFIG="/etc/qpage.cf"
++QPAGE_CONFIG="/usr/local/etc/qpage.conf"
+ 
+ 
+ #
+@@ -41,7 +41,7 @@ SNPP_SERVER="localhost"
+ # copies of the configuration file.  Only one filename
+ # may be specified.
+ #
+-SNPP_SERVER_FILE="/etc/qpage.servers"
++SNPP_SERVER_FILE="/usr/local/etc/qpage.servers"
+ 
+ 
+ #
+@@ -51,7 +51,7 @@ SNPP_SERVER_FILE="/etc/qpage.servers"
+ # for that user, QuickPage will assume all group privileges
+ # assigned to that user.
+ #
+-DAEMON_USER="daemon"
++DAEMON_USER="uucp"
+ 
+ 
+ #
diff --git a/comms/qpage/files/patch-ixo.c b/comms/qpage/files/patch-ixo.c
new file mode 100644
index 000000000000..f4e00311433a
--- /dev/null
+++ b/comms/qpage/files/patch-ixo.c
@@ -0,0 +1,10 @@
+--- ixo.c.orig	1999-01-02 01:59:33 UTC
++++ ixo.c
+@@ -368,7 +368,6 @@ hangup_modem(int fd)
+ 	if (tcsetattr(fd, TCSANOW, &ti) < 0) {
+ 		qpage_log(LOG_DEBUG, "tcsetattr(): %s", strerror(errno));
+ 		closemodem(fd);
+-		return;
+ 	}
+ 
+ 	/*
diff --git a/comms/qpage/files/patch-qpage.man b/comms/qpage/files/patch-qpage.man
new file mode 100644
index 000000000000..810bd5a86fc9
--- /dev/null
+++ b/comms/qpage/files/patch-qpage.man
@@ -0,0 +1,11 @@
+--- qpage.man.orig	1999-05-08 22:07:31 UTC
++++ qpage.man
+@@ -867,7 +867,7 @@ if more than one paging service is used 
+ must be able to detect when it's safe to send dial commands to the modem.
+ .LP
+ .SH FILES
+-/etc/qpage.cf
++/usr/local/etc/qpage.conf
+ .SH SEE ALSO
+ .B RFC-1861
+ .SH KNOWN BUGS
diff --git a/comms/qpage/files/patch-srvrsnpp.c b/comms/qpage/files/patch-srvrsnpp.c
new file mode 100644
index 000000000000..d0241fa13e58
--- /dev/null
+++ b/comms/qpage/files/patch-srvrsnpp.c
@@ -0,0 +1,28 @@
+--- srvrsnpp.c.orig	2016-01-16 20:44:37 UTC
++++ srvrsnpp.c
+@@ -523,6 +523,7 @@ snpp(PAGE *p)
+ 	char		*errmsg;
+ 	char		*a;
+ 	char		*b;
++	char		*m;
+ 	int		i;
+ 	int		badarg;
+ 	int		gotpager;
+@@ -701,7 +702,16 @@ snpp(PAGE *p)
+ 
+ 				p->created = time(NULL);
+ 				(void)sprintf(buff, "%d", pagecount++);
+-				(void)strcat(p->messageid, buff);
++				m = (void *)malloc(sizeof(*m) * (strlen(p->messageid) + strlen(buff) + 1));
++				if ( m == NULL ) {
++					message("554 Message failed (out of memory)");
++					qpage_log(LOG_ERR, "snpp(): cannot allocate memory for p->messageid");
++					clear_page(p, TRUE);
++					break;
++				}
++				(void)sprintf(m, "%s%s", p->messageid, buff);
++				my_free(p->messageid);
++				p->messageid = m;
+ 
+ 				qpage_log(LOG_ALERT, "page submitted, id=%s, from=%s",
+ 					p->messageid,
diff --git a/comms/qpage/files/patch-util.c b/comms/qpage/files/patch-util.c
new file mode 100644
index 000000000000..473e86f81a3e
--- /dev/null
+++ b/comms/qpage/files/patch-util.c
@@ -0,0 +1,11 @@
+--- util.c.orig	1998-10-25 19:55:11 UTC
++++ util.c
+@@ -537,7 +537,7 @@ msgcpy(char *dst, char *src, int n)
+ 	** Now make sure we didn't chop a word in the middle.
+ 	*/
+ 	if (*src && end) {
+-		*end++ = '\0';
++		*++end = '\0';
+ 		src = start;
+ 	}
+ 
diff --git a/comms/qpage/files/qpage.in b/comms/qpage/files/qpage.in
new file mode 100644
index 000000000000..f55223805ff9
--- /dev/null
+++ b/comms/qpage/files/qpage.in
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+# PROVIDE: qpage
+# REQUIRE: NETWORKING
+# KEYWORD: shutdown
+#
+# Add the following lines to /etc/rc.conf to enable/configure this service:
+#
+# qpage_enable (bool):         Set to NO by default.
+#                              Set it to YES to enable qpage.
+# qpage_queue_interval (int):  Set to 10 (seconds) by default.
+# qpage_cfg_file (path):       Set it to an alternate configuration file path
+#                              if desired.
+# qpage_flags (str):           Set it to a list of additional command-line
+#                              parameters if desired.
+#
+
+. /etc/rc.subr
+
+name="qpage"
+rcvar=qpage_enable
+
+command=%%PREFIX%%/bin/${name}
+
+load_rc_config $name
+
+: ${qpage_enable="NO"}
+: ${qpage_queue_interval="10"}
+
+stop_cmd=${name}_stop
+extra_commands="reload"
+reload_cmd=${name}_reload
+
+command_args="-q ${qpage_queue_interval} ${qpage_flags}"
+if [ -n "${qpage_cfg_file}" ]; then
+	command_args="${command_args} -C ${qpage_cfg_file}"
+fi
+
+qpage_stop() {
+	/usr/bin/killall qpage
+}
+
+qpage_reload() {
+	# awk pattern matches master daemon process only (PPID 1 in 3rd column)
+	pid=`/bin/ps alcxww | /usr/bin/awk "/^ *[0-9]+ +[0-9]+ +1 .* ${name}\$/{print \\\$2}"`
+
+	if [ -n "$pid" ]; then
+		kill -HUP $pid
+	else
+		echo "$0: no qpage daemon found" >& 2
+	fi
+}
+
+run_rc_command "$1"
diff --git a/comms/qpage/pkg-descr b/comms/qpage/pkg-descr
new file mode 100644
index 000000000000..d960681c80a0
--- /dev/null
+++ b/comms/qpage/pkg-descr
@@ -0,0 +1,11 @@
+QuickPage sends messages to a paging terminal using the SNPP and IXO
+(also known as TAP) protocols.  It is normally used with no options
+other than a recipient and the message text, in which case the message
+is sent to the SNPP server where it is submitted to a page queue to be
+sent by a separate daemon process.
+
+Page groups and duty schedules are supported.  Status notification
+messages indicating the success or failure of a page are sent via
+e-mail to submitters of high-priority (level 0) pages.
+
+WWW: http://www.qpage.org/
diff --git a/comms/qpage/pkg-plist b/comms/qpage/pkg-plist
new file mode 100644
index 000000000000..25fc131ebf35
--- /dev/null
+++ b/comms/qpage/pkg-plist
@@ -0,0 +1,4 @@
+bin/qpage
+@sample etc/qpage.conf.sample
+man/man1/qpage.1.gz
+@dir(uucp,dialer,0775) /var/spool/qpage