aboutsummaryrefslogtreecommitdiff
path: root/comms/yaps
diff options
context:
space:
mode:
authorStefan Eßer <se@FreeBSD.org>2000-10-20 21:36:22 +0000
committerStefan Eßer <se@FreeBSD.org>2000-10-20 21:36:22 +0000
commit73d964492da0076a65e207399d70b76c63cb4b05 (patch)
tree848a2b1968d7f0f82e4db1ac85997bf299cbb2c5 /comms/yaps
parent3f9eb8e356a65db7d1d4bf49a77110cdc7db5ed9 (diff)
downloadports-73d964492da0076a65e207399d70b76c63cb4b05.tar.gz
ports-73d964492da0076a65e207399d70b76c63cb4b05.zip
Add definitions for new prefixes of German mobile phone networks (D1: 0170,
0D2: 173, E+: 0178). I do not know and thus can't add a definition for SMS to Viag-Interkom's E2.
Notes
Notes: svn path=/head/; revision=34049
Diffstat (limited to 'comms/yaps')
-rw-r--r--comms/yaps/files/patch-ae284
1 files changed, 284 insertions, 0 deletions
diff --git a/comms/yaps/files/patch-ae b/comms/yaps/files/patch-ae
new file mode 100644
index 000000000000..872830aa71be
--- /dev/null
+++ b/comms/yaps/files/patch-ae
@@ -0,0 +1,284 @@
+--- yaps.rc~ Wed Jun 11 19:39:06 1997
++++ yaps.rc Tue Oct 17 21:11:37 2000
+@@ -7,12 +7,11 @@
+ #########################################
+ #
+-# This is a comma seperated list of available services. This
+-# is required for autodetect the matching service for a
+-# pager-id
+-services D1,D2,E+
++# This is a comma seperated list of available services. This list
++# is required to autodetect the matching service for a pager-id.
++services D1_170,D1_171,D2_172,D2_173,E+_177,E+_178
+ +services Telmi,Telmi-Fun,Telmi-Family,Telmi-Top,Telmi-Pro
+ +services Skyper,Quix
+ #
+-# This is the default caller-id. If the protocol/service allowes
++# This is the default caller-id. If the protocol/service allows
+ # it, this is inserted in the message (and the receiver gets this
+ # as the sender's number)
+@@ -23,9 +22,9 @@
+ signature (It's me!)
+ #
+-# You can either switch the use of the signature here on for all
++# You can either enable the use of the signature here for all
+ # services or in each service section for that particular service.
+ use-signature True
+ #
+-# To get more verbose output when running yaps increase this value.
++# Increase this value to get more verbose output when running yaps.
+ # Currently 4 is the highest supported value.
+ verbose 0
+@@ -33,5 +32,5 @@
+ # If you'd like to log every sending session define this. It should
+ # point to a writeable file. If you install the software setgid, then
+-# change the group of this file to the same yaps uses and make it
++# change the group of this file to the one yaps uses and make it
+ # group writeable.
+ logfile /var/log/yaps.log
+@@ -41,5 +40,5 @@
+ modems standard
+ #
+-# some global defaults for the serial interface (even if the most
++# some global defaults for the serial interface (even if most
+ # protocols are assuming 7e1, these settings seem to work well)
+ speed 38400
+@@ -49,11 +48,11 @@
+
+ #
+-# To calculate the cost for each call, you can define some globales
+-# here and do the fine tuning in each protocol
++# To calculate the cost for each call, you can define some globals
++# here and do the fine tuning in each protocol section
+ cost cost=0.12,unit=DM,remainder=2,dial-overhead=13
+
+ #
+-# These are two example of internal conversion tables. The can be
+-# used using the `convert' entry (see below).
++# These are two examples of internal conversion tables. They can be
++# used via the `convert' entry (see below).
+ cv-default {
+ Ä [
+@@ -75,5 +74,5 @@
+ #
+ # These values are normally only found in each service section,
+-# but are listen here with an explaination for completeness.
++# but are listed here with an explaination for completeness.
+ #
+ # This is the phone number of the modem gateway for this service
+@@ -87,11 +86,11 @@
+
+ #
+-# Most services limit the length of a message to a specific length.
+-# Enter the value here to check valid messages
++# Most services limit the length of a message to some value.
++# Enter the value here to check valid messages.
+ #max-size 160
+
+ #
+ # If a message is longer than max-size, you can set this to split
+-# it off into several single messages of allowed length
++# it off into several single messages of maximum allowed length.
+ #may-split True
+
+@@ -103,5 +102,5 @@
+ #
+ # Some services allow to send more than one message per session. If
+-# it is limited, set it using this parameter
++# there is a limit, set it using this parameter.
+ #max-messages 1
+
+@@ -111,6 +110,6 @@
+
+ #
+-# If the service is reachable over a phonenumber where the pager-id
+-# is part of the phone number, define this and add a `%P' anywehere
++# If the service is reachable over a phone number where the pager-id
++# is part of the phone number, define this and add a `%P' anywhere
+ # in the `phone' number.
+ #insert-pager-id True
+@@ -125,6 +124,6 @@
+
+ #
+-# Check for valid call id (see below for more details) While
+-# valid-pid is required, this is optional
++# Check for valid call id (see below for more details). While
++# valid-pid is required, this is optional.
+ #valid-cid ^(001|1)
+ #change-cid 001
+@@ -136,5 +135,5 @@
+ #valid-pid ^(0171|0049171)
+ #valid-pid 0171|0049171
+-# Use these paramters in the global section if you want do not want
++# Use these paramters in the global section if you do not want
+ # to check pager-ids (and do not set change-pid):
+ #valid-pid .
+@@ -148,24 +147,24 @@
+ #
+ # As the services do not use (in general) the ISO 8859/1 character set,
+-# one can define convertion tables. you can either specify a file which
++# one can define conversion tables. You can either specify a file which
+ # contains the convertion rules:
+ #conv-table /usr/local/lib/yaps/iso2din.tab
+
+-# or use predefined convertion rules
++# or use predefined conversion rules:
+ #convert *no-control,*no-8bit,cv-default,cv-extended
+
+ #
+ # If this is set, send a message even if a requested feature is
+-# not available
++# not available.
+ #force True
+
+ #
+-# If the provider supportes to set a delay for sending the message,
+-# set this
++# If the provider supports to set a delay for sending the message,
++# set this.
+ #can-delay True
+
+ #
+-# If the provider can delete a buffered message after a period of time,
+-# set this
++# If the provider may delete a buffered message after some period of time,
++# set this.
+ #can-expire True
+
+@@ -176,5 +175,5 @@
+ #
+ # To check wether a call-id/pager-id is valid use these paramters.
+-# For the exact syntax see the documentation
++# For the exact syntax see the documentation.
+ #check-call-id >1111111111111111<
+ #check-pager-id >1111111111111111<
+@@ -183,8 +182,8 @@
+ #
+ # These values are typically found in a modem section, but can also
+-# appear in the global section to set some defaults
++# appear in the global section to set some defaults.
+
+ #
+-# Set this to the modem device you wish to use
++# Set this to the modem device you wish to use.
+ #device /dev/modem
+ #device /dev/cua1
+@@ -201,5 +200,5 @@
+ # The different format of the part which is appended to the lockfile
+ # and the contents can be specified here. See documentation for a
+-# full list inclusive explaination
++# full list inclusive explaination.
+ #lock-method sysv4
+ #lock-method binary
+@@ -208,13 +207,13 @@
+ #
+ # These are send/expect sequences to talk to the modem. For an exact
+-# definition see (again) the documentation. Following entries are
++# definition see (again) the documentation. The following entries are
+ # supported:
+-# init: to initialize the modem
++# init: initialize the modem
+ # local-init: a second initialization string, used to customize
+-# already defined modems for different handling
+-# dial: to dial a phone number %L is replaced with the
+-# phone number itself
+-# timeout: the default timeout in seconds to wait for answers
+-# reset: to reset the modem
++# already initialized modems
++# dial: dial a phone number; %L is replaced with the
++# phone number to dial
++# timeout: the default timeout in seconds to wait for an answer
++# reset: reset the modem
+
+ #########################################
+@@ -224,5 +223,26 @@
+ # D1 (by Deutsche Telekom)
+ #
+-[D1]
++[D1_170]
++protocol tap
++valid-pid 0170|0049170|49170
++change-pid 0170
++convert *no-8bit,cv-d1
++cv-d1 {
++ Ä [
++ Ö \
++ Ü ~
++ ä {
++ ö |
++ ü ~
++ ß ^]
++}
+++cost timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++phone 01712092522
++max-size 160
++may-split True
++use-call-id False
++tap-old True
++#
++[D1_171]
+ protocol tap
+ valid-pid 0171|0049171|49171
+@@ -247,5 +267,5 @@
+ # D2 (by Mannesmann Mobilfunk)
+ #
+-[D2]
++[D2_172]
+ modem standard-d2
+ protocol ucp
+@@ -265,8 +285,26 @@
+ ucp-extend True
+ #
++[D2_173]
++modem standard-d2
++protocol ucp
++valid-pid 0173|0049173|49173
++change-pid 0173
++convert *no-8bit,cv-default
+++cost timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++phone 01722278020
++max-size 160
++may-split True
++use-call-id True
++can-delay True
++can-expire True
++can-rds True
++check-call-id >1111111111111111<
++check-pager-id >1111111111111111<
++ucp-extend True
++#
+ # E+ (by ???)
+ # !! UNTESTED !!
+ #
+-[E+]
++[E+_177]
+ protocol tap
+ valid-pid 0177|0049177|49177
+@@ -279,4 +317,16 @@
+ use-call-id False
+ #
++[E+_178]
++protocol tap
++valid-pid 0178|0049178|49178
++change-pid 0178
++convert *no-8bit,cv-default
+++cost timetable=Wk0800-1800=5.7;Wk1800-0800=11.4;Ss=11.4
++ls -ltr
++phone 01771167
++max-size 160
++may-split True
++use-call-id False
++#
+ # Telmi, Telmi-* (by Deutsche Funkruf)
+ # !! ONLY TESTED FOR TELMI-FUN !!
+@@ -336,7 +386,8 @@
+ #
+ # Older Unix versions
+-lock-prefix /usr/spool/uucp/LCK..
++#lock-prefix /usr/spool/uucp/LCK..
+ # Newer Unix versions
+-#lock-prefix /var/spool/uucp/LCK..
++lock-prefix /var/spool/uucp/LCK..
++#lock-prefix /var/spool/lock/LCK..
+ #lock-prefix /var/lock/LCK..
+ # SysV4