5 files changed, 40 insertions, 667 deletions

diff --git a/comms/mgetty+sendfax/Makefile b/comms/mgetty+sendfax/Makefile
index fd65bbd206b5..877261c8a45f 100644
--- a/comms/mgetty+sendfax/Makefile
+++ b/comms/mgetty+sendfax/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	mgetty
 PORTVERSION=	1.1.35
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	comms
 MASTER_SITES=	ftp://mgetty.greenie.net/pub/mgetty/source/1.1/
 DISTNAME=	${PORTNAME}${PORTVERSION}-Feb22
@@ -19,6 +19,7 @@ USE_PERL5=	yes
 
 CONFLICTS=	netpbm-[0-9]*
 
+SUB_FILES=	pkg-message mgettycfg
 WRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}
 MAKE_FLAGS=	CFLAGS="${CFLAGS}" prefix=${PREFIX} -f
 ALL_TARGET=	noident all
@@ -102,8 +103,7 @@ post-install:
 	${INSTALL_DATA} -m 600 ${WRKSRC}/voice/voice.conf-dist \
 		${PREFIX}/etc/mgetty+sendfax/voice.conf.dist
 	@${TAR}  -cf - -C ${WRKSRC} samples | ${TAR}  -xf - -C ${PREFIX}/lib/mgetty+sendfax/
-.if !defined(BATCH)
-	@(cd ${PKGDIR}; export PKG_PREFIX=${PREFIX}; ${PERL5} ${PKGINSTALL} _ POST-INSTALL)
-.endif
+	@${INSTALL_SCRIPT} ${WRKDIR}/mgettycfg ${PREFIX}/bin
+	@${CAT} ${PKGMESSAGE}
 
 .include <bsd.port.post.mk>
diff --git a/comms/mgetty+sendfax/files/mgettycfg.in b/comms/mgetty+sendfax/files/mgettycfg.in
index 9b76b5a1efcd..0a10770a4349 100644
--- a/comms/mgetty+sendfax/files/mgettycfg.in
+++ b/comms/mgetty+sendfax/files/mgettycfg.in
@@ -1,11 +1,9 @@
-#!/usr/bin/perl
+#!%%LOCALBASE%%/bin/perl
 
-exit 0 if $ARGV[1] ne "POST-INSTALL";
-exit 0 if $ENV{'BATCH'};
 exit 0 if ! -t;
 
-print STDERR "\n\n\n =========== mgetty+sendfax configuration ===========\n\n";
-$prefix = $ENV{'PKG_PREFIX'};
+print STDERR "\n=========== mgetty+sendfax configuration ===========\n";
+$prefix = "%%PREFIX%%";
 $sep = "~";
 
 &read_config ("$prefix/etc/mgetty+sendfax/mgetty.config");
@@ -19,7 +17,7 @@ foreach (keys(%var)) {
 }
 
 $a = 1;
-$devices = $var{'ports'} ? $var{'ports'} : "cuad1";
+$devices = $var{'ports'} ? $var{'ports'} : "cuau1";
 while ($a) {
     $devices = &ask ("list of devices", $devices);
 
@@ -156,7 +154,7 @@ sub inq_m {
     $def{'debug'} = 4 if !$def{'debug'};
     $def{'debug'} = &ask ("   - `debug (mgetty)' 
      This sets the amount of logging `mgetty' will do. A good value is
-     4, more details are seen with `5', and `9' is really noisy.  Try
+     4, more details are seen with `5', and `9' is really noisy. Try
      it! The log data is written to the file `/tmp/log_mg.cuaxx'.", 
 			  $def{'debug'});
 
@@ -180,7 +178,7 @@ sub inq_m {
     $def{'switchbd'} = &ask ("   - `switchbd'
      Some modems, mainly Rockwell chipsets, switch to 19200 bps when
      entering fax mode. Others may need other speed switches (but I
-     know none).  If your modem is Rockwell based, try `switchbd 19200'
+     know none). If your modem is Rockwell based, try `switchbd 19200'
      if fax reception doesn't work. (*Warning:* if this is set wrongly,
      fax reception will definitely fail. For most sane modems, you do
      *not need* this.). Set speed or `0'", $def{'switchbd'});
@@ -193,7 +191,7 @@ sub inq_m {
      to initialize any modem, nor will it wait for `RING'. It will just
      wait for any character, and then output the issue file and login
      prompt. This option is used if you want to connect to machines via
-     nullmodem cable.",  $def{'direct'});
+     null modem cable.",  $def{'direct'});
 
     $settings .= " blocking";
     $def{'blocking'} = "NO" if !$def{'blocking'};
@@ -205,12 +203,12 @@ sub inq_m {
 
     $settings .= " port-owner";
     $def{'port-owner'} = "uucp" if !$def{'port-owner'};
-    $def{'port-owner'} =  &ask ("   - `port-owner'
+    $def{'port-owner'} = &ask ("   - `port-owner'
      If set, mgetty will `chown' the tty line to the given username (you
      can specify a string or an integer uid, but the integer must be
-     valid).  This is highly recommended for security purposes: only
+     valid). This is highly recommended for security purposes: only
      give port access to those users you trust not to misuse your modem
-     lines!",   $def{'port-owner'});
+     lines!", $def{'port-owner'});
 
     $settings .= " port-group";
     $def{'port-group'} = "uucp" if !$def{'port-group'};
@@ -322,13 +320,12 @@ sub inq_m {
     $def{'rings'} = 1 if !$def{'rings'};
     $def{'rings'} = &ask ("   - `rings' 
      Sets the number of `RING' messages to wait for, before mgetty
-     picks up the phone. *Warning:* if your modem  auto-answers, for 
-     whatever reason, set this to something  *different* than the 
-     value set with `ATS0=mmm', otherwise the  modems autoanswer and 
-     mgettys manual answer will collide (most  modems hang up if a 
+     picks up the phone. *Warning:* if your modem auto-answers, for 
+     whatever reason, set this to something *different* than the 
+     value set with `ATS0=mmm', otherwise the modem's autoanswer and 
+     mgetty's manual answer will collide (most modems hang up if a 
      command is received during auto-answer)", $def{'rings'});
 
-  
     $settings .= " answer-chat";
     $def{'answer-chat'} = '"" ATA CONNECT \c \r' if !$def{'answer-chat'};
     $def{'answer-chat'} =&ask ("   - `answer-chat'
@@ -407,7 +404,7 @@ sub inq_m {
 
     $settings .= " login-prompt";
     $def{'login-prompt'} = "@!login: " if !$def{'login-prompt'} ;
-    $def{'login-prompt'} =  &ask("   - `login-prompt'
+    $def{'login-prompt'} = &ask("   - `login-prompt'
      This specifies the login prompt that mgetty will output. Some
      special characters in this string (and in the issue file, btw) are
      recognized and replaced by something else:
@@ -427,14 +424,14 @@ sub inq_m {
         * \\T current time in hh:mm:ss format
         * \\DIGIT character with the specified octal code
 
-     The maximum lenght of the login prompt is limited to 140
+     The maximum length of the login prompt is limited to 140
      characters (after expansion).", $def{'login-prompt'});
 
     $settings .= " login-time";
     $def{'login-time'} = 240 if !$def{'login-time'};
     $def{'login-time'} = &ask ("   - `login-time'
      This specifies the maximum time the user can take to log in. If no
-     login has occured after that time, `mgetty' will hang up.", 
+     login has occurred after that time, `mgetty' will hang up.", 
 			       $def{'login-time'});
 
     $settings .= " fax-server-file";
@@ -468,16 +465,16 @@ sub inq_m {
 
     $settings .= " fax-owner";
     $def{'fax-owner'} = "uucp" if !$def{'fax-owner'};
-    $def{'fax-owner'} =  &ask ("   - `fax-owner'
+    $def{'fax-owner'} = &ask ("   - `fax-owner'
      If set, mgetty will `chown' the received files to the given username 
      (you can specify a string or an integer uid, but the integer must be
-     valid).",  $def{'fax-owner'});
+     valid).", $def{'fax-owner'});
 
     $settings .= " fax-group";
     $def{'fax-group'} = "modem" if !$def{'fax-group'};
     $def{'fax-group'} = &ask ("   - `fax-group' 
      If set, mgetty will `chgrp' the received files to this group id
-     (which  can be given as group name, or as integer gid).", $def{'fax-group'});
+     (which can be given as group name, or as integer gid).", $def{'fax-group'});
 
     $settings .= " fax-mode";
     $def{'fax-mode'} = "0660" if !$def{'fax-mode'};
@@ -489,7 +486,7 @@ sub inq_f {
     $def_f{'debug'} = 4 if !$def_f{'debug'};
     $def_f{'debug'} = &ask ("   - `debug (sendfax)' 
      controls the amount of information written into the fax log file.
-     `0' means \"totally silent\" (not even  errors are written), `9' 
+     `0' means \"totally silent\" (not even errors are written), `9' 
      is really noisy. I usually use `3' or `4' in normal use, and `6' 
      for debugging.", $def_f{'debug'});
 
@@ -516,7 +513,7 @@ sub inq_f {
      successfully transmit a page, `sendfax' will give up or simply go
      on, depending on the setting of `max-tries-continue' (see below).
      If this is set to `0', `sendfax' will ignore retransmission
-     requests and simply go on.",  $def_f{'max-tries'});
+     requests and simply go on.", $def_f{'max-tries'});
 
     $settings .= " max-tries-continue";
     $def_f{'max-tries-continue'} = "YES" if !$def_f{'max-tries-continue'};
@@ -534,9 +531,9 @@ sub inq_f {
     $def_f{'speed'} = &ask ("   - `speed'
      Set the port speed to use for fax send operations. Usually,
      `38400' is a good choice, but a few dumb modems (for example, some
-     based on rockwell chipsets) need `19200' or even `9600'. A few
+     based on Rockwell chipsets) need `19200' or even `9600'. A few
      modems can go higher, but `sendfax' may not support it, and it may
-     not always work.",  $def_f{'speed'});
+     not always work.", $def_f{'speed'});
 
     $settings .= " dial-prefix";
     $def_f{'dial-prefix'} = "ATD" if !$def_f{'dial-prefix'};
@@ -552,7 +549,7 @@ sub inq_f {
     $settings .= " poll-dir";
     $def_f{'poll-dir'} = "./" if !$def_f{'poll-dir'};
     $def_f{'poll-dir'} = &ask ("   - `poll-dir'
-     This is used to specify a directory where polled faxes (wheather
+     This is used to specify a directory where polled faxes (weather
      maps and such) are to be saved into. Default is the current
      directory.", $def_f{'poll-dir'});
 
@@ -571,6 +568,7 @@ sub inq_f {
      on stdout, if set to `no', `sendfax' will only print error and
      warning messages.", $def_f{'verbose'});
 }
+
 sub setdef {
     local ($p, $l);
     $p = shift;
@@ -588,6 +586,7 @@ sub setdef {
 	$def_f{$_} = substr ($var_f{$_}, 1) if (!$def_f{$_} && $var_f{$_} =~ /^$sep/);
     }
 }
+
 sub ask {
     ($info, $default, $x) = @_;
     print STDERR "\n$info: ";
@@ -600,6 +599,7 @@ sub ask {
     }
     return $_;
 }
+
 sub read_config {
     local ($conf, $port, $a, $b);
 
diff --git a/comms/mgetty+sendfax/files/pkg-message.in b/comms/mgetty+sendfax/files/pkg-message.in
new file mode 100644
index 000000000000..74e43d05ebe8
--- /dev/null
+++ b/comms/mgetty+sendfax/files/pkg-message.in
@@ -0,0 +1,7 @@
+=================================================
+
+To use the interactive configuration script, run:
+
+  %%LOCALBASE%%/bin/mgettycfg
+
+=================================================
diff --git a/comms/mgetty+sendfax/pkg-install b/comms/mgetty+sendfax/pkg-install
deleted file mode 100644
index 9b76b5a1efcd..000000000000
--- a/comms/mgetty+sendfax/pkg-install
+++ /dev/null
@@ -1,635 +0,0 @@
-#!/usr/bin/perl
-
-exit 0 if $ARGV[1] ne "POST-INSTALL";
-exit 0 if $ENV{'BATCH'};
-exit 0 if ! -t;
-
-print STDERR "\n\n\n =========== mgetty+sendfax configuration ===========\n\n";
-$prefix = $ENV{'PKG_PREFIX'};
-$sep = "~";
-
-&read_config ("$prefix/etc/mgetty+sendfax/mgetty.config");
-foreach (keys(%var)) {
-    $var_m{$_} = $var{$_};
-    delete $var{$_};
-}
-&read_config ("$prefix/etc/mgetty+sendfax/sendfax.config");
-foreach (keys(%var)) {
-    $var_f{$_} = $var{$_};
-}
-
-$a = 1;
-$devices = $var{'ports'} ? $var{'ports'} : "cuad1";
-while ($a) {
-    $devices = &ask ("list of devices", $devices);
-
-    $_ = $devices;
-    $w = 0;
-    foreach (split) {
-	if (! -c "/dev/$_" ) {
-	    print STDERR "warning: device file /dev/$_ does not exist!\n";
-	    $w++;
-	}
-    }	
-    if ($w) {
-	$a = 0 if (&yesno ("are you sure?" , "n") eq "y");
-    } else {
-	$a = 0;
-    }
-}
-
-open (TMP1, ">/tmp/mgetty.config.$$") || die "$!\n";
-open (TMP2, ">/tmp/sendfax.config.$$") || die "$!\n";
-$_ = join (":", $devices);
-print TMP2 "fax-devices $_\n\n";
-
-$_ = $devices;
-
-foreach $port (split) {
-    print STDERR "\n\n   *** Configuring for port $port ***\n\n";
-    print TMP1 "\nport $port\n";
-    print TMP2 "\nport $port\n";
-    &setdef ($port);
-again:
-    &inq_m;
-    $settings_m = $settings;
-    &inq_f;
-    $settings_f = "fax-id modem-type switchbd $settings";
-    goto again if (&confirm ($port) ne "y");
-    &write_tmp;
-}
-
-close (TMP1);
-close (TMP2);
-if ( -e "$prefix/etc/mgetty+sendfax/mgetty.config") {
-    system ("mv -f $prefix/etc/mgetty+sendfax/mgetty.config $prefix/etc/mgetty+sendfax/mgetty.config.old");
-    system ("rm -f $prefix/etc/mgetty+sendfax/mgetty.config");
-}
-if ( -e "$prefix/etc/mgetty+sendfax/sendfax.config") {
-    system ("mv -f $prefix/etc/mgetty+sendfax/sendfax.config $prefix/etc/mgetty+sendfax/sendfax.config.old");
-    system ("rm -f $prefix/etc/mgetty+sendfax/sendfax.config");
-}
-system ("mv -f /tmp/mgetty.config.$$ $prefix/etc/mgetty+sendfax/mgetty.config");
-system ("mv -f /tmp/sendfax.config.$$ $prefix/etc/mgetty+sendfax/sendfax.config");
-
-open (F, ">$prefix/etc/mgetty+sendfax/faxheader");
-print F "\n      FAX  FROM:  **not configured** $def{fax-id}     TO: \@T\@    PAGE: \@P\@ OF \@M\@ \n";
-close (F);
-
-
-print STDERR "\n\nediting /etc/ttys...\n";
-
-open (F, "/etc/ttys");
-@ttys = <F>;
-close (F);
-
-foreach $tty (@ttys) {
-    $_ = $devices;
-    foreach $port (split) {
-	if ($tty =~ /^\s*$port/) {
-	    print STDERR "replacing line $tty";
-	    $tty = "$port\t\"$prefix/sbin/mgetty\"\tunknown on insecure\n";
-	    $replaced{$port} = 1;
-	}
-    }
-}
-$_ = $devices;
-foreach $port (split) {
-    if (!$replaced{$port}) {
-	print STDERR "adding port $port\n";
-	push (@ttys, "$port\t\"$prefix/sbin/mgetty\"\tunknown on insecure\n");
-    }
-}
-system ("mv -f /etc/ttys /etc/ttys.old");
-open (F, ">/etc/ttys");
-print F @ttys;
-close (F);
-
-# install new_fax
-if (-e "$prefix/lib/mgetty+sendfax/lib/new_fax") {
-    print STDERR "$prefix/lib/mgetty+sendfax/lib/new_fax already exists - not changed\n";
-} else {
-    print STDERR "installing $prefix/lib/mgetty+sendfax/lib/samples/new_fax.mail as new_fax\n";
-    open (F, "$prefix/lib/mgetty+sendfax/lib/samples/new_fax.mail");
-    open (G, "$prefix/lib/mgetty+sendfax/lib/new_fax");
-    while (<F>) {
-      s:/usr/local/bin/:$prefix:;
-      s:/usr/lib/sendmail:/usr/sbin/sendmail:;
-      s/^MAILTO=.*/$def{'notify'}\n/;
-      print G "$_";
-    }
-    close F;
-    close G;
-    chmod 0755, "$prefix/lib/mgetty+sendfax/lib/new_fax";
-}
-print STDERR "\n\n*** WARNING the directory /var/spool/fax/outgoing/ is world writable.\n*** This is potentially insecure\n";
-
-exit 0;
-
-sub confirm {
-    $_ = shift;
-    print STDERR "\n\n\tSettings for port $_\n\t------------------------\n";
-    $_ = $settings_m;
-    foreach (split) {
-	print STDERR "\t$_ $def{$_}\n" if ($def{$_});
-    }
-    $_ = $settings_f;
-    foreach (split) {
-	print STDERR "\t$_ $def_f{$_}\n" if ($def_f{$_});
-    }
-    return &yesno ("OK?", "y");
-}
-    
-sub write_tmp {
-    $_ = $settings_m;
-    foreach (split) {
-	print TMP1 "$_ $def{$_}\n" if ($def{$_});
-    }
-    $_ = $settings_f;
-    foreach (split) {
-	print TMP2 "$_ $def_f{$_}\n" if ($def_f{$_});
-    }
-}
-
-sub inq_m {
-    $settings = "debug";
-    $def{'debug'} = 4 if !$def{'debug'};
-    $def{'debug'} = &ask ("   - `debug (mgetty)' 
-     This sets the amount of logging `mgetty' will do. A good value is
-     4, more details are seen with `5', and `9' is really noisy.  Try
-     it! The log data is written to the file `/tmp/log_mg.cuaxx'.", 
-			  $def{'debug'});
-
-    $settings .= " fax-id";
-    $def{'fax-id'} = "00 00 000000" if ! $def{'fax-id'};
-    $def{'fax-id'} = &ask ("   - `fax-id'
-     This sets the fax station ID used in fax mode to identify your
-     site to the caller (usually this is simply your fax phone number).
-     ", $def{'fax-id'}) ;
-    $def_f{'fax-id'} = $def{'fax-id'} ;
-
-    $settings .= " speed";
-    $def{'speed'} = 38400 if !$def{'speed'};
-    $def{'speed'} = &ask ("   - `speed'
-     Specify, as integer value, the port speed to use. Default is
-     38400. If the given speed is not valid, `mgetty' complains loudly 
-     and exits.", $def{'speed'});
-
-    $settings .= " switchbd";
-    $def{'switchbd'} = 0 if !$def{'switchbd'};
-    $def{'switchbd'} = &ask ("   - `switchbd'
-     Some modems, mainly Rockwell chipsets, switch to 19200 bps when
-     entering fax mode. Others may need other speed switches (but I
-     know none).  If your modem is Rockwell based, try `switchbd 19200'
-     if fax reception doesn't work. (*Warning:* if this is set wrongly,
-     fax reception will definitely fail. For most sane modems, you do
-     *not need* this.). Set speed or `0'", $def{'switchbd'});
-    $def_f{'switchbd'} = $def{'switchbd'};
-
-    $settings .= " direct";
-    $def{'direct'} = "NO" if !$def{'direct'};
-    $def{'direct'} = &ask ("   - `direct' 
-     Tells mgetty that it is running on a direct line. Mgetty won't try
-     to initialize any modem, nor will it wait for `RING'. It will just
-     wait for any character, and then output the issue file and login
-     prompt. This option is used if you want to connect to machines via
-     nullmodem cable.",  $def{'direct'});
-
-    $settings .= " blocking";
-    $def{'blocking'} = "NO" if !$def{'blocking'};
-    $def{'blocking'} = &ask ("   - `blocking' 
-     Tells mgetty to open the device in `blocking' mode, that is, the
-     `open()' system call won't succeed until carrier detect is set.
-     This is set if `mgetty' is called as `getty'. I'm not sure whether
-     it's very useful, but I include it for completeness", $def{'blocking'});
-
-    $settings .= " port-owner";
-    $def{'port-owner'} = "uucp" if !$def{'port-owner'};
-    $def{'port-owner'} =  &ask ("   - `port-owner'
-     If set, mgetty will `chown' the tty line to the given username (you
-     can specify a string or an integer uid, but the integer must be
-     valid).  This is highly recommended for security purposes: only
-     give port access to those users you trust not to misuse your modem
-     lines!",   $def{'port-owner'});
-
-    $settings .= " port-group";
-    $def{'port-group'} = "uucp" if !$def{'port-group'};
-    $def{'port-group'} = &ask ("   - `port-group' 
-     If set, mgetty will `chgrp' the tty line to this group id (which
-     can be given as group name, or as integer gid). If it's not given,
-     or not valid, the primary group id of `port-owner' 
-     will be used.", $def{'port-group'});
-
-    $settings .= " port-mode";
-    $def{'port-mode'} = "0660" if !$def{'port-mode'};
-    $def{'port-mode'} = &ask ("   - `port-mode'
-     Specifies the permissions to `chmod' the device to. 
-     *Never* make a modem device world-accessible, better use `0660'
-     or even `0600'.", $def{'port-mode'} );
-   
-    $settings .= " toggle-dtr";
-    $def{'toggle-dtr'} = "YES" if !$def{'toggle-dtr'};
-    $def{'toggle-dtr'} = &ask ("   - `toggle-dtr'
-     Tells mgetty whether it should lower the DTR line upon startup to
-     reset modem. Default is `yes', but some (few) modems react
-     allergic to that and crash.", $def{'toggle-dtr'});
-
-    $settings .= " toggle-dtr-waittime";
-    $def{'toggle-dtr-waittime'} = 500 if !$def{'toggle-dtr-waittime'};
-    $def{'toggle-dtr-waittime'} = &ask ("   - `toggle-dtr-waittime'
-     Specifies the time (in ms) to hold the DTR line low.", $def{'toggle-dtr-waittime'} );
-
-    $settings .= " data-only";
-    $def{'data-only'} = "NO" if !$def{'data-only'};
-    $def{'data-only'} =&ask ("   - `data-only'
-     Tells `mgetty' to forget about faxing and only use the data part of
-     the modem. Default is `false'. You need this if your modem can't
-     distinguish incoming fax and data calls.", $def{'data-only'} );
-
-    $settings .= " fax-only";
-    $def{'fax-only'} = "NO" if !$def{'fax-only'};
-    $def{'fax-only'} = &ask ("   - `fax-only'
-     Tells `mgetty' to put the modem in fax-only mode. You need this if
-     your modem can't distinguish incoming fax and data calls, but you
-     need fax more important than data; and you need it if you want to
-     disable data calls for security reasons (this could be achieved
-     via `login.config' as well)", $def{'fax-only'});
-
-    $settings .= " modem-type";
-    $def{'modem-type'} = "auto" if ! $def{'modem-type'};
-    $def{'modem-type'} = &ask ("   - `modem-type'
-     Specifies the kind of modem connected to the port. Valid options are:
-        * auto
-          Mgetty will detect the modem type itself (which may occasionally
-           be not desirable, or it may fail on old modem equipment).
-        * c2.0
-          Modem is a CLASS 2.0 fax mode. Works better than class 2, if
-          both are available, because its better standardized. Known to
-          work with USR and ZyXEL.
-        * cls2
-          Modem is a CLASS 2 fax modem, mgetty will not try class 2.0.
-        * data
-          Do not try fax initialization
-     There is no way (yet) to tell mgetty to use *only* fax mode and
-     refuse data calls with this option, use the `fax-only true'
-     statement for that.", $def{'modem-type'});
-    $def_f{'modem-type'} = $def{'modem-type'};
-
-    $settings .= " init-chat";
-    $def{'init-chat'} = '"" ATS0=0Q0&D3&C1 OK' if ! $def{'init-chat'};
-    $def{'init-chat'} = &ask ("   - `init-chat' 
-     Tells mgetty the chat sequence to use for initializing the modem.
-     *Warning*: the sequence starts with *expect*, which will in most
-     cases be `\"\"' (nothing). This ordering was chosen because UUCP
-     does it this way, and I wanted to avoid confusion here.
-
-     Example:
-
-         \"\" \\d\\d\\d+++\\d\\d\\dATQ0E1V1H0 OK ATL0M0S0=0 OK AT&K3 OK
-    init sequence", $def{'init-chat'});		
-
-    $settings .= " force-init-chat";
-    $def{'force-init-chat'} = "" if !$def{'force-init-chat'};
-    $def{'force-init-chat'} = &ask ("   - `force-init-chat'
-     In some cases, the modem can get stuck in a mode where it won't
-     react to a simple `AT' command. Usually this happens because the
-     modem is set to ignore a DTR drop and still has a data connection
-     to the other side. If you use a voice modem, it could be stuck in
-     voice mode.
-
-     In these situations, the normal `init-chat' will time out, because
-     the modem won't send the proper responses back.
-
-     To get the modem back into a sane state, you can use the
-     `force-init-chat' chat sequence. The default setup will send the
-     DLE ETX characters, to get voice modems back to life, and then the
-     `(pause)+++(pause)ATH0' sequence to get the modem back from data
-     mode to command mode.
-
-     You could prepend this sequence to `init-chat' (it wouldn't harm),
-     but especially the pauses around the +++ sequence makes this
-     undesirable slow.", $def{'force-init-chat'});
-
-    $settings .= " modem-check-time";
-    $def{'modem-check-time'} = 3600 if ! $def{'modem-check-time'};
-    $def{'modem-check-time'} = &ask ("   - `modem-check-time'
-     Some modems have the nasty tendency to crash silently. With this
-     option, you tell `mgetty' to check every SECONDS seconds with a
-     simple `AT...OK' sequence whether the modem still reacts. If not,
-     `mgetty' will restart itself and do a full modem reset.", $def{'modem-check-time'});
-
-    $settings .= " rings";
-    $def{'rings'} = 1 if !$def{'rings'};
-    $def{'rings'} = &ask ("   - `rings' 
-     Sets the number of `RING' messages to wait for, before mgetty
-     picks up the phone. *Warning:* if your modem  auto-answers, for 
-     whatever reason, set this to something  *different* than the 
-     value set with `ATS0=mmm', otherwise the  modems autoanswer and 
-     mgettys manual answer will collide (most  modems hang up if a 
-     command is received during auto-answer)", $def{'rings'});
-
-  
-    $settings .= " answer-chat";
-    $def{'answer-chat'} = '"" ATA CONNECT \c \r' if !$def{'answer-chat'};
-    $def{'answer-chat'} =&ask ("   - `answer-chat'
-     This is the command sequence that is used to answer a phone call.
-     Usually you can leave it at the default ` \"\" ATA CONNECT \\c \\r ',
-     but for some modems you need `ATS0=1' in place of `ATA' (ATA not
-     allowed). The extra `\\r' expect string is needed that the code can
-     grab the full CONNECT XYZ\\R string. It will work without the \\r,
-     but then the logging information will be less detailed. *Right now,
-     \\r won't work at all, it's not implemented yet. Don't use it.*
-     ", $def{'answer-chat'} );
-
-    $settings .= " answer-chat-timeout";
-    $def{'answer-chat-timeout'} = 80 if !$def{'answer-chat-timeout'};
-    $def{'answer-chat-timeout'} = &ask ("   - `answer-chat-timeout' 
-     During the ANSWER-CHAT, each \"expect\" string must be seen in the
-     time specified here. Default is 80 seconds. This time should be at
-     least some 5 seconds longer than the time set with the `ATS7=...'
-     modem setup command.", $def{'answer-chat-timeout'});
-
-    $settings .= " autobauding";
-    $def{'autobauding'} = "NO" if !$def{'autobauding'};
-    $def{'autobauding'} = &ask ("  - `autobauding'
-     Some modems switch their DTE line speed to the communication line
-     speed after connecting, e.g., after sending `CONNECT 2400', the
-     modem switches to 2400 bps. Newer modems usually have a switch to
-     \"lock\" a DTE baud rate, which is strongly recommended. If your
-     modem insists on doing this speed switch, setting `autobauding' to
-     YES will make mgetty behave accordingly.", $def{'autobauding'});
-
-    $settings .= " ringback";
-    $def{'ringback'} = "NO" if !$def{'ringback'} ;
-    $def{'ringback'} = &ask ("   - `ringback'
-     If you have to put your modem and your telephone on the same phone
-     line, you can switch on \"ringback\" or \"ring-twice\". This means,
-     mgetty won't answer the phone on the first call, but remember the
-     call, and pick up on the second call (if it comes in the time
-     specified by `ringback-time').", $def{'ringback'} );
-
-    $settings .= " ringback-time";
-    $def{'ringback-time'} = "30" if !$def{'ringback-time'} ;
-    $def{'ringback-time'} = &ask ("  - `ringback-time'
-     This setting specifies how much time may pass between the first
-     and the second call if \"ringback\" is active.", $def{'ringback-time'});
-
-    $settings .= " ignore-carrier";
-    $def{'ignore-carrier'} = "false" if !$def{'ignore-carrier'} ;
-    $def{'ignore-carrier'} = &ask ("   - `ignore-carrier'
-
-     If your Modem does not assert the DCD (carrier detect) line, or the
-     serial port or cable or serial driver is broken, it is possible
-     that `mgetty' or `login' will block after a successful CONNECT
-     (that means: everything seems to work, but suddenly nothing is sent
-     to the port anymore. Depending on the operating system used, this
-     can be before printing the `/etc/issue' file or not before printing
-     the `password:' prompt.
-
-     To work around this, you can switch off the carrier detection in
-     software: set `ignore-carrier true'. Default is `false'.
-
-     *WARNING:* If you use this, your system won't be able to detect
-     when a caller just hangs up instead of cleanly logging out. This
-     may result in hanging modems, etc.", $def{'ignore-carrier'});
-
-    $settings .= " issue-file";
-    $def{'issue-file'} = "/etc/issue" if !$def{'issue-file'} ;
-    $def{'issue-file'} = &ask ("   - `issue-file'
-     This is the file printed before the login prompt.", $def{'issue-file'});
-
-    $settings .= " prompt-waittime";
-    $def{'prompt-waittime'} = "500" if !$def{'prompt-waittime'} ;
-    $def{'prompt-waittime'} = &ask ("   - `prompt-waittime'
-     This specifies how long `mgetty' will wait for modem and line to
-     settle down (in ms) before printing issue file and login prompt",
-				    $def{'prompt-waittime'});
-
-    $settings .= " login-prompt";
-    $def{'login-prompt'} = "@!login: " if !$def{'login-prompt'} ;
-    $def{'login-prompt'} =  &ask("   - `login-prompt'
-     This specifies the login prompt that mgetty will output. Some
-     special characters in this string (and in the issue file, btw) are
-     recognized and replaced by something else:
-        * @ system name
-        * \\n newline
-        * \\r carriage return
-        * \\g bell
-        * \\b backspace (ascii 010)
-        * \\f form feed (ascii 013)
-        * \\t TAB
-        * \\P (and \\L) port name (e.g. ttyS0)
-        * \\C date and time, in \"ctime()\" format
-        * \\I Connection string (e.g. 2400/REL)
-        * \\N (and \\U) number of users currently logged in
-        * \\S Port speed (e.g. 38400)
-        * \\D current date in dd/mm/yy format
-        * \\T current time in hh:mm:ss format
-        * \\DIGIT character with the specified octal code
-
-     The maximum lenght of the login prompt is limited to 140
-     characters (after expansion).", $def{'login-prompt'});
-
-    $settings .= " login-time";
-    $def{'login-time'} = 240 if !$def{'login-time'};
-    $def{'login-time'} = &ask ("   - `login-time'
-     This specifies the maximum time the user can take to log in. If no
-     login has occured after that time, `mgetty' will hang up.", 
-			       $def{'login-time'});
-
-    $settings .= " fax-server-file";
-    $def{'fax-server-file'} = &ask ("   - `fax-server-file'
-     Specifies the fax file(s) that is to be sent if someone else calls
-     your modem in *fax polling mode*, that is, the caller *receives* a
-     document.
-
-     Normally, the file given is a text file, containing the list of G3
-     files to send to the calling machine, one file per line. Comment
-     lines (starting with \"#\") are ignored. For backward compatibility,
-     `mgetty' does check whether the named file is a G3 file itself, in
-     which case this file is sent directly (but then, you can only send
-     one page).
-
-     Not all modems support fax poll *server* mode, I know that the
-     ZyXEL and MultiTech do.", $def{'fax-server-file'});
-
-    $settings .= " diskspace";
-    $def{'diskspace'} = 1024 if !$def{'diskspace'};
-    $def{'diskspace'} = &ask ("   - `diskspace'
-     This setting tells mgetty the minimum amount of disk space (in KB) that
-     has to be available in the fax spool directory for fax reception
-     to be allowed.",  $def{'diskspace'});
-
-    $settings .= " notify";
-    $def{'notify'} = "faxadmin" if !$def{'notify'};
-    $def{'notify'} = &ask ("   - `notify'
-     This is the address that will get mails if a fax is received. Not
-     fully tested.", $def{'notify'});
-
-    $settings .= " fax-owner";
-    $def{'fax-owner'} = "uucp" if !$def{'fax-owner'};
-    $def{'fax-owner'} =  &ask ("   - `fax-owner'
-     If set, mgetty will `chown' the received files to the given username 
-     (you can specify a string or an integer uid, but the integer must be
-     valid).",  $def{'fax-owner'});
-
-    $settings .= " fax-group";
-    $def{'fax-group'} = "modem" if !$def{'fax-group'};
-    $def{'fax-group'} = &ask ("   - `fax-group' 
-     If set, mgetty will `chgrp' the received files to this group id
-     (which  can be given as group name, or as integer gid).", $def{'fax-group'});
-
-    $settings .= " fax-mode";
-    $def{'fax-mode'} = "0660" if !$def{'fax-mode'};
-    $def{'fax-mode'} = &ask ("   - `fax-mode'
-     Specifies the permissions to `chmod' the received files.", $def{'fax-mode'});
-}
-sub inq_f {
-    $settings = "debug";
-    $def_f{'debug'} = 4 if !$def_f{'debug'};
-    $def_f{'debug'} = &ask ("   - `debug (sendfax)' 
-     controls the amount of information written into the fax log file.
-     `0' means \"totally silent\" (not even  errors are written), `9' 
-     is really noisy. I usually use `3' or `4' in normal use, and `6' 
-     for debugging.", $def_f{'debug'});
-
-    $settings .= " modem-init";
-    $def{'modem-init'} = &ask ("   - `modem-init' 
-     Specifies an `AT...' command that is to be sent to the modem right
-     at the *beginning* of all modem talk (even before setting the modem
-     into fax mode, so this could be an `ATZ' if you want to reset the
-     modem).", "");
-
-    $settings .= " modem-handshake";
-    $def_f{'modem-handshake'} = "AT&H3" if !$def_f{'modem-handshake'};
-    $def_f{'modem-handshake'} = &ask ("   - `modem-handshake'
-     Specifies an `AT...' command that will be sent to the modem at the
-     *end* of the modem initialization, right before dialing. *Do not
-     use ATZ or such here*, since resetting the modem will switch off
-     fax mode.", $def_f{'modem-handshake'});
-
-    $settings .= " max-tries";
-    $def_f{'max-tries'} = 3 if !$def_f{'max-tries'};
-    $def_f{'max-tries'} = &ask ("   - `max-tries'
-     Specify the maximum number of tries per page if the receiving end
-     reports reception errors. If NNN tries do not suffice to
-     successfully transmit a page, `sendfax' will give up or simply go
-     on, depending on the setting of `max-tries-continue' (see below).
-     If this is set to `0', `sendfax' will ignore retransmission
-     requests and simply go on.",  $def_f{'max-tries'});
-
-    $settings .= " max-tries-continue";
-    $def_f{'max-tries-continue'} = "YES" if !$def_f{'max-tries-continue'};
-    $def_f{'max-tries-continue'} = &ask ("   - `max-tries-continue' 
-     After the maximum number of tries for one page are reached,
-     `sendfax' can report an error and abort (`max-tries-continue NO'),
-     or go on with the next page (YES).
-
-     For \"mission critical\" faxes, I'd set it to NO, but since the page
-     quality is most often quite good even if reported as \"page bad\",
-     the default is YES.", $def_f{'max-tries-continue'});
-
-    $settings .= " speed (fax)";
-    $def_f{'speed'} = 38400 if ! $def_f{'speed'};
-    $def_f{'speed'} = &ask ("   - `speed'
-     Set the port speed to use for fax send operations. Usually,
-     `38400' is a good choice, but a few dumb modems (for example, some
-     based on rockwell chipsets) need `19200' or even `9600'. A few
-     modems can go higher, but `sendfax' may not support it, and it may
-     not always work.",  $def_f{'speed'});
-
-    $settings .= " dial-prefix";
-    $def_f{'dial-prefix'} = "ATD" if !$def_f{'dial-prefix'};
-    $def_f{'dial-prefix'} = &ask ("   - `dial-prefix'
-     This is the command used for dialing out. Usually this will be
-     something simple, as `ATD' or `ATDP', but if you have an unusual
-     setup, it could also be something like `ATX0DP0;X4DT' (meaning:
-     switch off dial-tone detection, pulse-dial `0', back to command
-     mode, switch on dial-tone detection, and go ahead dialing with
-     touch tones). The phone number will be sent right after the
-     `dial-prefix'.", $def_f{'dial-prefix'});
-
-    $settings .= " poll-dir";
-    $def_f{'poll-dir'} = "./" if !$def_f{'poll-dir'};
-    $def_f{'poll-dir'} = &ask ("   - `poll-dir'
-     This is used to specify a directory where polled faxes (wheather
-     maps and such) are to be saved into. Default is the current
-     directory.", $def_f{'poll-dir'});
-
-    $settings .= " normal-res";
-    $def_f{'normal-res'} = "NO" if !$def_f{'normal-res'};
-    $def_f{'normal-res'} = &ask ("   - `normal-res'
-     If set to `yes' or `true' (boolean), `sendfax' won't attempt to
-     make a fax connection in \"fine resolution\" mode. Normally you
-     won't need to use that option, since `faxrunq' will set the `-n'
-     switch if needed.", $def_f{'normal-res'});
-
-    $settings .= " verbose";
-    $def_f{'verbose'} = "NO" if !$def_f{'verbose'};
-    $def_f{'verbose'} = &ask ("   - `verbose' 
-     If set to `yes' or `true', `sendfax' will output progress reports
-     on stdout, if set to `no', `sendfax' will only print error and
-     warning messages.", $def_f{'verbose'});
-}
-sub setdef {
-    local ($p, $l);
-    $p = shift;
-    $l = length ($p) + 1;
-    foreach (keys(%var_m)) {
-	$def{$_} = substr ($var_m{$_}, $l) if ($var_m{$_} =~ /^$p/);
-    }
-    foreach (keys(%var_m)) {
-	$def{$_} = substr ($var_m{$_}, 1) if (!$def{$_} && $var_m{$_} =~ /^$sep/);
-    }
-    foreach (keys(%var_f)) {
-	$def_f{$_} = substr ($var_f{$_}, $l) if ($var_f{$_} =~ /^$p/);
-    }
-    foreach (keys(%var_m)) {
-	$def_f{$_} = substr ($var_f{$_}, 1) if (!$def_f{$_} && $var_f{$_} =~ /^$sep/);
-    }
-}
-sub ask {
-    ($info, $default, $x) = @_;
-    print STDERR "\n$info: ";
-    print STDERR "[$default] " if ($default);
-    $_ = <STDIN>;
-    s/^\s*//;
-    chop;
-    if ($_ eq "") {
-	return $default;
-    }
-    return $_;
-}
-sub read_config {
-    local ($conf, $port, $a, $b);
-
-    $conf = shift;
-    $port = $sep;
-    if ( -f $conf) {
-	open (F, $conf) || die "$!\n";
-	while (<F>) {
-	    chop;
-	    s/^\s*//;
-	    next if /^#/;
-	    next if /^$/;
-	    ($a, $b) = split (/[ \t\n]+/, $_, 2);
-	    if ($a eq "port") {
-		$port = $b;
-		$var{'ports'} .= "$port ";
-	    } else {
-		$var{$a} = "$port $b";
-	    }
-	}
-	close F;
-    }
-}
-
-sub yesno {
-    print STDERR "$_[0]: ";
-    print STDERR "[$_[1]] " if ($_[1]);
-    $_ = <STDIN>;
-    chop;
-    $_ = $_[1] if ! $_;
-    return "y" if /^[Yy].*/;
-    return "n";
-}
diff --git a/comms/mgetty+sendfax/pkg-plist b/comms/mgetty+sendfax/pkg-plist
index 8a0642bf5157..19b26c18729b 100644
--- a/comms/mgetty+sendfax/pkg-plist
+++ b/comms/mgetty+sendfax/pkg-plist
@@ -9,6 +9,7 @@ bin/g3cat
 bin/g3topbm
 bin/lintopvf
 bin/mg.echo
+bin/mgettycfg
 bin/newslock
 bin/pbm2g3
 bin/pvfamp