Convert to UCL & cleanup pkg-message (categories a-c)

16 files changed, 96 insertions, 24 deletions

diff --git a/comms/aprsd/files/pkg-message.in b/comms/aprsd/files/pkg-message.in
index 090edc418799..d4272c7fdf0f 100644
--- a/comms/aprsd/files/pkg-message.in
+++ b/comms/aprsd/files/pkg-message.in
@@ -1,3 +1,6 @@
+[
+{ type: install
+  message: <<EOM
 aprsd is now installed
 
 aprsd has various config files to set up in %%PREFIX%%/etc/aprsd
@@ -5,3 +8,6 @@ logs are kept in /var/log/aprsd
 
 To enable aprsd you need to add: aprsd_enable="YES" to /etc/rc.conf
 to run aprsd as UID aprsd   add: aprsd_root="NO" to /etc/rc.conf
+EOM
+}
+]
diff --git a/comms/atslog/files/pkg-message.in b/comms/atslog/files/pkg-message.in
index a9a20aff1874..63e3f28c6491 100644
--- a/comms/atslog/files/pkg-message.in
+++ b/comms/atslog/files/pkg-message.in
@@ -1,4 +1,6 @@
-
+[
+{ type: install
+  message: <<EOM
 To setup SQL tables for the ATSlog, please run:
 
 %%DATADIR%%/sql/install-sql.pl %%PREFIX%%/etc/atslog.conf
@@ -20,3 +22,6 @@ that you add something like the following to httpd.conf:
     </Directory>
 
 and then edit  %%PREFIX%%/www/atslog/include/config.inc.php
+EOM
+}
+]
diff --git a/comms/bforce-kst/files/pkg-message.in b/comms/bforce-kst/files/pkg-message.in
index 9a2a050b62ef..5ca6ed02ae2c 100644
--- a/comms/bforce-kst/files/pkg-message.in
+++ b/comms/bforce-kst/files/pkg-message.in
@@ -1,8 +1,10 @@
-**************************************************************
-
+[
+{ type: install
+  message: <<EOM
 Please don't forget to copy and edit configuration files found
 in %%PREFIX%%/etc/fido/bforce.
 
 If you using u-srif, please install lang/python
-
-**************************************************************
+EOM
+}
+]
diff --git a/comms/bluez-firmware/pkg-message b/comms/bluez-firmware/pkg-message
index 76a2bd203c84..bd1acfa48cc2 100644
--- a/comms/bluez-firmware/pkg-message
+++ b/comms/bluez-firmware/pkg-message
@@ -1,4 +1,6 @@
-
+[
+{ type: install
+  message: <<EOM
 NOTICE
 ======
 
@@ -37,4 +39,6 @@ you should then see the following lines in your dmesg(8):
  ubt0: <Broadcom Corp. BCM2033, class 224/1, rev 1.01/0.a0, addr 7> on uhub0
  ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
  ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320
-
+EOM
+}
+]
diff --git a/comms/efax/files/pkg-message.in b/comms/efax/files/pkg-message.in
index 39baf16af0ff..8209467cbe47 100644
--- a/comms/efax/files/pkg-message.in
+++ b/comms/efax/files/pkg-message.in
@@ -1,5 +1,11 @@
+[
+{ type: install
+  message: <<EOM
 Edit %%PREFIX%%/etc/efax.rc (or replace it with
 %%PREFIX%%/etc/efax.rc.ja first) before using
 efax.
 
 You should at least modify DEV=, FROM=, and NAME=.
+EOM
+}
+]
diff --git a/comms/gnokii/files/pkg-message.in b/comms/gnokii/files/pkg-message.in
index 7f1b37d3d186..59777ed2c9ac 100644
--- a/comms/gnokii/files/pkg-message.in
+++ b/comms/gnokii/files/pkg-message.in
@@ -1,4 +1,6 @@
-==============================================================================
+[
+{ type: install
+  message: <<EOM
 The default config is installed in %%PREFIX%%/etc/gnokiirc.sample, and is
 configured for Nokia 6210 phones connected on COM1. Have a look at the
 documentation/manpages for more information. You'll need to copy
@@ -10,4 +12,6 @@ gnokii group.
 
 NOTE: if you have enabled and plan using the smsd program check
 %%PREFIX%%/share/smsd/README.
-==============================================================================
+EOM
+}
+]
diff --git a/comms/hylafax/files/pkg-message.in b/comms/hylafax/files/pkg-message.in
index 271161dc8e9f..961215db3ac4 100644
--- a/comms/hylafax/files/pkg-message.in
+++ b/comms/hylafax/files/pkg-message.in
@@ -1,3 +1,6 @@
+[
+{ type: install
+  message: <<EOM
 Hylafax was installed.  You'll need manual configurations to actually
 activate it.
 
@@ -21,3 +24,6 @@ Documentation:
 	On Line Manuals: 	man hylafax-client
 				man hylafax-server
 	World Wide Web site:	http://www.hylafax.org/
+EOM
+}
+]
diff --git a/comms/linrad/pkg-message b/comms/linrad/pkg-message
index 4d64710ffcf8..a2dbb7bb1367 100644
--- a/comms/linrad/pkg-message
+++ b/comms/linrad/pkg-message
@@ -1,6 +1,12 @@
+[
+{ type: install
+  message: <<EOM
 linrad is now installed.
 linrad is a shell script which "wraps" xlinrad.
 When used for the first time, the linrad wrapper will create a ~/.linrad
 directory which will be your working directory.
 
 Now, go chase some DX.
+EOM
+}
+]
diff --git a/comms/lirc/files/pkg-message.in b/comms/lirc/files/pkg-message.in
index 05366eca8869..a0f6d7e57bab 100644
--- a/comms/lirc/files/pkg-message.in
+++ b/comms/lirc/files/pkg-message.in
@@ -1,4 +1,6 @@
-**********************************************************************
+[
+{ type: install
+  message: <<EOM
 This port does not contain any FreeBSD device drivers for infrared
 devices. This port installs the LIRC daemons and tools for interacting
 with drivers that support the LIRC device interface.
@@ -79,5 +81,6 @@ them apply) notes re ir-keytable(1) and the lirc devinput change
 are also here:
 
 	http://forum.xbmc.org/showthread.php?t=101151
-
-**********************************************************************
+EOM
+}
+]
diff --git a/comms/mgetty+sendfax/files/pkg-message.in b/comms/mgetty+sendfax/files/pkg-message.in
index 74e43d05ebe8..32245e74c013 100644
--- a/comms/mgetty+sendfax/files/pkg-message.in
+++ b/comms/mgetty+sendfax/files/pkg-message.in
@@ -1,7 +1,9 @@
-=================================================
-
+[
+{ type: install
+  message: <<EOM
 To use the interactive configuration script, run:
 
   %%LOCALBASE%%/bin/mgettycfg
-
-=================================================
+EOM
+}
+]
diff --git a/comms/ncid/files/pkg-message.in b/comms/ncid/files/pkg-message.in
index b0fb97ca4bf9..ac06110b255b 100644
--- a/comms/ncid/files/pkg-message.in
+++ b/comms/ncid/files/pkg-message.in
@@ -1,5 +1,7 @@
-********************************************************************************
-
+[
+{ type: install
+  message: <<EOM
 ===>  Please edit %%ETCDIR%%/ncidd.conf to configure your modem
-
-********************************************************************************
+EOM
+}
+]
diff --git a/comms/redsea/pkg-message b/comms/redsea/pkg-message
index a5529dab99f5..26e81ae3e20a 100644
--- a/comms/redsea/pkg-message
+++ b/comms/redsea/pkg-message
@@ -1,3 +1,6 @@
+[
+{ type: install
+  message: <<EOM
 Don't forget to give redsea something to decode!  For output from a USB 
 software-defined radio stick, you may want to consider installing 
 comms/rtl-sdr or another SDR tool of your choice that can feed raw I/Q 
@@ -8,3 +11,6 @@ bitstream, or an audio file containing a multiplexed FM signal.
 
 Fuller details are contained in the redsea wiki:
 https://github.com/windytan/redsea/wiki/Input-formats
+EOM
+}
+]
diff --git a/comms/telldus-core/files/pkg-message.in b/comms/telldus-core/files/pkg-message.in
index 9b44c686d8fe..c1dc1ecda5a9 100644
--- a/comms/telldus-core/files/pkg-message.in
+++ b/comms/telldus-core/files/pkg-message.in
@@ -1,4 +1,6 @@
-
+[
+{ type: install
+  message: <<EOM
 ======
 NOTICE
 ======
@@ -17,4 +19,6 @@ Then start telldusd.
 
 When starting for the first time, you might need to unplug/plugin the device
 to allow devd to fix the permissions on the /dev/ugenX.X device.
-
+EOM
+}
+]
diff --git a/comms/trustedqsl/files/pkg-message b/comms/trustedqsl/files/pkg-message
index 3b91c7e29e88..8c61cf6d6f5b 100644
--- a/comms/trustedqsl/files/pkg-message
+++ b/comms/trustedqsl/files/pkg-message
@@ -1,3 +1,9 @@
+[
+{ type: install
+  message: <<EOM
 trustedqsl is now installed. You will have to create a directory .tqsl in
 your home directory and setup a copy of %%PREFIX%%/share/TrustedQSL/config.xml
 here before this program will run correctly.
+EOM
+}
+]
diff --git a/comms/uarduno/pkg-message b/comms/uarduno/pkg-message
index bbe5f3e5a711..f7d690a2495b 100644
--- a/comms/uarduno/pkg-message
+++ b/comms/uarduno/pkg-message
@@ -1,3 +1,6 @@
+[
+{ type: install
+  message: <<EOM
 The Arduino Uno uses a specific vendor ID of 0x2341 and product ID of 0x0001
 
 If you modify your Arduino Uno to use a DIFFERENT vendor ID or product ID, you
@@ -16,3 +19,6 @@ To automatically load the driver on startup, add the following line to
 your /boot/loader.conf file:
 
   uarduno_load="YES"
+EOM
+}
+]
diff --git a/comms/xastir/files/pkg-message.in b/comms/xastir/files/pkg-message.in
index 98d87f8f1db9..e70dec639962 100644
--- a/comms/xastir/files/pkg-message.in
+++ b/comms/xastir/files/pkg-message.in
@@ -1,8 +1,12 @@
-********************************************************************
+[
+{ type: install
+  message: <<EOM
 Xastir is now installed.
 
 Hop on over to http://www.xastir.org/ for details on getting
 maps and for more information on using Xastir.
 
 Your map directory is %%PREFIX%%/share/xastir/maps
-********************************************************************
+EOM
+}
+]