4 files changed, 54 insertions, 71 deletions

diff --git a/editors/staroffice70/Makefile b/editors/staroffice70/Makefile
index 894aa7303c32..ede175f7e4b3 100644
--- a/editors/staroffice70/Makefile
+++ b/editors/staroffice70/Makefile
@@ -8,32 +8,28 @@
 PORTNAME=	staroffice
 PORTVERSION=	6.0
 CATEGORIES=	editors linux
-MASTER_SITES=	${MASTER_SITE_LOCAL} \
-		ftp://ftp.teleport.ch/FreeBSD/patches/
-MASTER_SITE_SUBDIR=	obrien
-DISTNAME=	so-6_0-beta-bin-linux-en.bin
-DISTFILES=	so60dat-20011016.tar.bz2
-EXTRACT_SUFX=
-EXTRACT_ONLY=	so60dat-20011016.tar.bz2
+MASTER_SITES=
+DISTNAME=	so-6_0-ga-bin-linux-en.bin
+DISTFILES=      so-6_0-ga-bin-linux-en.bin
+.if defined(WITH_ADABAS)
+DISTFILES+=     soa-6_0-ga-bin-linux-en.bin
+.endif
 
 MAINTAINER=	mbr@FreeBSD.org
 
 FETCH_DEPENDS=	${LINUXBASE}/usr/X11R6/lib/libXrender.so.1.0:${PORTSDIR}/emulators/linux_base-7
 BUILD_DEPENDS=	${LINUXBASE}/usr/X11R6/lib/libXrender.so.1.0:${PORTSDIR}/emulators/linux_base-7
 
-BROKEN=		"SUN beta program for 6.0 has been closed. Distfile is not available anymore"
-USE_BZIP2=	yes
 ONLY_FOR_ARCHS=	i386
 NO_CDROM=	'Must be downloaded direct from Sun via www interface'
 IS_INTERACTIVE=	yes
 NO_BUILD=	yes
 SOVERSION=	${PORTNAME}${PORTVERSION}
-KDEHOME=	.kde
 WRKSRC=		${WRKDIR}/${SOVERSION}
 TMPDIR=		${WRKDIR}/tmp
 LD_PATH=	${TMPDIR}:${WRKSRC}:${LINUXBASE}/lib:${LINUXBASE}/usr/lib
 INSTDB.INS=	${PREFIX}/${SOVERSION}/program/instdb.ins
-OPENCONFIG=	${PREFIX}/${SOVERSION}/share/config/registry/cache/instance/org/openoffice
+ADABAS_DIST=	soa-6_0-ga-bin-linux-en.bin
 
 .include <bsd.port.pre.mk>
 
@@ -45,7 +41,8 @@ pre-fetch:
 	@${ECHO}
 	@${ECHO} Check if linprocfs is running: YES
 .else
-	@${ECHO} -----------------------------------------------------------
+	@${ECHO}
+	@${ECHO} ERROR:
 	@${ECHO}
 	@${ECHO} Staroffice setup needs a running linprocfs, which is not
 	@${ECHO} activated on your system. Please read the linprocfs\(5\)
@@ -53,10 +50,25 @@ pre-fetch:
 	@${ECHO}
 	@${ECHO} linproc /compat/linux/proc linprocfs rw 0 0
 	@${ECHO}
-	@${ECHO} -----------------------------------------------------------
 	@${FALSE}
 .endif
-.if ${OSVERSION} < 410000
+.if !exists(${LINUXBASE}/etc/mtab)
+	@${ECHO}
+	@${ECHO} ERROR:
+	@${ECHO}
+	@${ECHO} The file ${LINUXBASE}/etc/mtab is missing.
+	@${ECHO} Staroffice needs this file else some functions
+	@${ECHO} are not working. You can create it with
+	@${ECHO}
+	@${ECHO} touch ${LINUXBASE}/etc/mtab
+	@${ECHO}
+	@${FALSE}
+.else
+	@${ECHO} Check if ${LINUXBASE}/etc/mtab exists: YES
+.endif
+.if ${OSVERSION} < 450000
+	@${ECHO}
+	@${ECHO} ERROR:
 	@${ECHO}
 	@${ECHO} OS-VERSION ${OSVERSION}
 	@${ECHO}
@@ -64,19 +76,28 @@ pre-fetch:
 	@${ECHO} /usr/src/sys/i386/linux/linux_sysvec.c
 	@${ECHO} \(revision 1.55.2.1 or higher\)
 	@${ECHO}
-	@${ECHO} Please upgrade to FreeBSD 4.1
+	@${ECHO} Please upgrade to FreeBSD 4.5
 	@${ECHO}
 	@${FALSE}
 .endif
 .if ${SIZE} < 400000
 	@${ECHO}
+	@${ECHO} ERROR:
+	@${ECHO}
 	@${ECHO} There is only ${SIZE}K free disk space in
 	@${ECHO} ${WRKDIRPREFIX}. To unpack Staroffice needs
 	@${ECHO} at least 400000K free diskspace.
 	@${FALSE}
 .endif
-.if !exists(${DISTDIR}/${DISTNAME}${EXTRACT_SUFX})
-IGNORE="Please manually download ${DISTNAME}${EXTRACT_SUFX} from http://www.sun.com/staroffice.  Put ${DISTNAME}${EXTRACT_SUFX} into the directory ${DISTDIR} and run make again."
+.if !defined(WITH_ADABAS)
+	@${ECHO}
+	@${ECHO} If you like to install staroffice with ADABAS database support,
+	@${ECHO} cancel this installation now and start make again with
+	@${ECHO} WITH_ADABAS=YES.
+	@${ECHO}
+.endif
+.if !exists(${DISTDIR}/${DISTNAME})
+IGNORE="Please manually download ${DISTNAME} from http://www.sun.com/staroffice.  Put ${DISTNAME} into the directory ${DISTDIR} and run make again."
 .endif
 
 do-extract:
@@ -94,14 +115,10 @@ do-extract:
 	@cd ${WRKSRC}
 	@SAL_IGNOREXERRORS=1 ${WRKSRC}/${DISTNAME} -extract ${WRKSRC}
 	@${RM} ${WRKSRC}/${DISTNAME}
-	@cd ../../
-	@for file in ${EXTRACT_ONLY}; do \
-		if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} \
-		    ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS}) ; \
-		then \
-			exit 1; \
-		fi \
-	done
+.if defined(WITH_ADABAS)
+	@${CP} ${_DISTDIR}/${ADABAS_DIST} ${WRKSRC}
+	@${CHMOD} 755 ${WRKSRC}/${ADABAS_DIST}
+.endif
 .endif
 
 post-configure:
@@ -126,7 +143,7 @@ do-install:
 .endif
 	@${CAT} ${PKGMESSAGE}
 	@-SAL_IGNOREXERRORS=1 PATH="/bin:${PATH}" LD_LIBRARY_PATH=${LD_PATH} \
-		TEMP=${TMPDIR} ${LINUXBASE}/bin/sh -c '${WRKSRC}/setup -net'
+		TEMP=${TMPDIR} ${LINUXBASE}/bin/sh -c '${WRKSRC}/setup /net'
 	@if [ -f ${PREFIX}/${SOVERSION}/program/setup ]; then \
 		${ECHO} ; \
 		${ECHO} Ignore the error-message. StarOffice6.0 has been installed ; \
@@ -139,29 +156,16 @@ do-install:
 		${ECHO} ; \
 		${FALSE} ; \
 	fi
-	@${MKDIR} -p ${PREFIX}/${SOVERSION}/share/config/registry/cache/instance/org/openoffice
-	@${MKDIR} ${OPENCONFIG}/Office
-	@${MKDIR} ${OPENCONFIG}/ucb
-.for f in Calc.dat Chart.dat Common.dat DataAccess.dat Draw.dat Impress.dat \
-    Java.dat Labels.dat Linguistic.dat Math.dat SFX.dat TypeDetection.dat \
-    Views.dat Writer.dat WriterWeb.dat
-	@${INSTALL_DATA} ${WRKDIR}/Office/${f} ${OPENCONFIG}/Office
-.endfor
-.for f in Configuration.dat Hierarchy.dat Store.dat
-	@${INSTALL_DATA} ${WRKDIR}/ucb/${f} ${OPENCONFIG}/ucb
-.endfor
-	@${INSTALL_DATA} ${WRKDIR}/Inet.dat ${OPENCONFIG}
-.for f in Setup.dat UserProfile.dat
-	@${INSTALL_DATA} ${WRKDIR}/${f} ${OPENCONFIG}
-.endfor
+.endif
+.if defined(WITH_ADABAS)
+	@-SAL_IGNOREXERRORS=1 PATH="/bin:${PATH}" LD_LIBRARY_PATH=${LD_PATH} \
+		TEMP=${TMPDIR} ${LINUXBASE}/bin/sh -c '${WRKSRC}/${ADABAS_DIST}'
 .endif
 
 post-install:
 	@${MV} ${INSTDB.INS} ${INSTDB.INS}.orig
 	@${SED} -e 's%DefaultDestPath = "${PREFIX}/staroffice%DefaultDestPath = "staroffice%' \
 	    ${INSTDB.INS}.orig > ${INSTDB.INS}
-	@${INSTALL_SCRIPT} ${PREFIX}/${SOVERSION}/program/soffice \
-		${PREFIX}/${SOVERSION}/program/spadmin
 .if !exists(${LINUXBASE}/usr/X11R6/lib/libXrender.so)
 	@${LN} -fs ${LINUXBASE}/usr/X11R6/lib/libXrender.so.1.0 ${PREFIX}/${SOVERSION}/program/libXrender.so
 .endif
diff --git a/editors/staroffice70/distinfo b/editors/staroffice70/distinfo
index 31ac1b5fe50d..9a76271336b9 100644
--- a/editors/staroffice70/distinfo
+++ b/editors/staroffice70/distinfo
@@ -1,3 +1,2 @@
-MD5 (so-6_0-beta-bin-linux-de.bin) = a4331218bbc377dc0d645c7a19d0ec0b
-MD5 (so-6_0-beta-bin-linux-en.bin) = fd6ff8f5c8b828a285c023db3fa8c232
-MD5 (so60dat-20011016.tar.bz2) = 8220d096d7fff608cbe092bc65cbd05a
+MD5 (soa-6_0-ga-bin-linux-en.bin) = 7f7003401e8533e7795faa0fd112111c
+MD5 (so-6_0-ga-bin-linux-en.bin) = 97cba97cb348d071bea7e8fc08079151
diff --git a/editors/staroffice70/files/setup.ins.patch b/editors/staroffice70/files/setup.ins.patch
deleted file mode 100644
index 87122bff86b0..000000000000
--- a/editors/staroffice70/files/setup.ins.patch
+++ /dev/null
@@ -1,9 +0,0 @@
---- setup.ins	Tue Aug 22 23:31:42 2000
-+++ setup.ins	Tue Aug 22 23:33:35 2000
-@@ -1,5 +1,5 @@
- Installation gid_Installation

--	DefaultDestPath = "office52";

-+	DefaultDestPath = "/usr/local/office52";

- 	ScriptVersion = 100;

- 	Bitmap		 = "so52.bmp";

- 	DefaultLanguage = "01";

diff --git a/editors/staroffice70/pkg-message b/editors/staroffice70/pkg-message
index cb46eea6ca67..2dde5d35760e 100644
--- a/editors/staroffice70/pkg-message
+++ b/editors/staroffice70/pkg-message
@@ -1,26 +1,15 @@
 StarOffice 6.0 Personal Install How-To
 
-Written by:      Darren Wiebe <dkwiebe@hagenhomes.com>
-		 and Martin Blapp <mb@imp.ch>
-
-------------------------------------------------------------------
-
-Note that this a a BETA RELEASE of Staroffice6.0
+Written by:   Martin Blapp <mb@imp.ch>
 
 ------------------------------------------------------------------
 
 BUGS:
 
-We have found a workaround for the install-user segfaults.
-The installation does not create serveral .dat files, which
-leads to segfaults and startup problems.
-
-WARNING:
-
-If you have already Staroffice5.2 installed and your work
-directory is a symlink to somewhere else and you do a upgrade,
-all your files in this directory will be lost ! Please make
-a backup of these files or the entire $HOME/office52 folder.
+If a user installation fails, just restart it. It will
+work the second time. Remove then your $HOME/staroffice6.0
+directory and the line beginning with "StarOffice 6.0" in
+your $HOME/.sversionrc and restart the installation.
 
 ------------------------------------------------------------------