13 files changed, 0 insertions, 591 deletions

diff --git a/emulators/vmware/Makefile b/emulators/vmware/Makefile
deleted file mode 100644
index 48a27ac1705f..000000000000
--- a/emulators/vmware/Makefile
+++ /dev/null
@@ -1,119 +0,0 @@
-# ports collection makefile for:	VMware 1.1.2 for Linux
-# Date created:		Fri 26 Nov 19:16:47 EST 1999
-# Whom:			vns@delta.odessa.ua
-#
-# $FreeBSD$
-# $vmFreeBSD: vmware/vmmon-only/freebsd/port/Makefile,v 1.8 1999/12/17 00:38:27 vsilyaev Exp $
-#
-
-PORTNAME=	vmware
-PORTVERSION=	1.1.2.364
-CATEGORIES=	emulators linux
-MASTER_SITES=	http://www4.vmware.com/software/ \
-		http://vmware-svca.www.conxion.com/software/ \
-		http://vmware-chil.www.conxion.com/software/ \
-		http://vmware-heva.www.conxion.com/software/ \
-		http://www.vmware.co.uk/software/ \
-		http://mirror.aarnet.edu.au/pub/vmware/software/ \
-		ftp://mirror.aarnet.edu.au/pub/vmware/software/
-DISTNAME=	VMware-${PORTVERSION:R}-${PORTVERSION:E}
-
-PATCH_SITES=	http://www.mindspring.com/~vsilyaev/vmware/files/ \
-		ftp://mirror.aarnet.edu.au/pub/vmware/freebsd/ \
-		http://mirror.aarnet.edu.au/pub/vmware/freebsd/
-PATCHFILES=	vmmon-freebsd-0.94.tar.gz \
-		vmnet-freebsd-0.10.tar.gz
-
-# Feel free to post your questions/reports/suggestions on this port to
-# freebsd-emulation mailing list with the following maintainer address CC'ed.
-MAINTAINER=	ak@freenet.co.uk
-COMMENT=	A virtual machine emulator - a full PC in a window
-
-BROKEN=		"Does not build"
-
-RUN_DEPENDS=	${LINUX_DIR}/lib/libc.so.6:${PORTSDIR}/emulators/linux_base
-
-RESTRICTED=	"Not sure if we can redistribute it"
-
-USE_SUBMAKE=	yes
-LINUX_DIR=	/compat/linux
-VMDIR=		${PREFIX}/lib/vmware
-
-ONLY_FOR_ARCHS=	i386
-USE_XLIB=	yes
-WRKSRC=		${WRKDIR}/vmware-distrib
-GZCAT=		${SETENV} ${SCRIPTS_ENV} ${SH} ${SCRIPTDIR}/extract
-MAN1=		vmware.1
-
-.include <bsd.port.pre.mk>
-
-.if ${OSVERSION} < 400013
-BROKEN=		"Systems prior to 400013 is out of support"
-.endif
-
-.if !defined(HAVE_LINPROCFS) && !exists(/modules/linprocfs.ko) && !exists(${PREFIX}/modules/linprocfs.ko)
-BROKEN=		"This software absolutely requires Linux procfs support"
-.endif
-
-.if exists(${WRKDIRPREFIX}${.CURDIR}/work/Makefile.inc.net)
-.include "${WRKDIRPREFIX}${.CURDIR}/work/Makefile.inc.net"
-.endif
-
-SCRIPTS_ENV+=	LINUX_DIR="${LINUX_DIR}" \
-		VMNET_HOST_IP="${VMNET_HOST_IP}" \
-		VMNET_NETMASK="${VMNET_NETMASK}"
-MAKE_ARGS=	KMODDIR="${VMDIR}/lib/modules"
-
-post-patch:
-	${CP} ${FILESDIR}/Makefile ${WRKSRC}
-
-setoptions:
-	${SED} 	-e 's;@@PREFIX@@;${PREFIX};' \
-		-e 's;@@HOST_IP@@;${VMNET_HOST_IP};' \
-		-e 's;@@NETMASK@@;${VMNET_NETMASK};' \
-		${FILESDIR}/config > ${WRKDIR}/config
-
-	${SED} 	-e 's;@@PREFIX@@;${PREFIX};' \
-		-e 's;@@NETWORKING@@;${VMNET_NETWORKING};' \
-		-e 's;@@HOST_IP@@;${VMNET_HOST_IP};' \
-		-e 's;@@NETMASK@@;${VMNET_NETMASK};' \
-		${FILESDIR}/vmware.sh > ${WRKDIR}/vmware.sh
-
-pre-install: setoptions
-	${INSTALL_MAN} ${WRKSRC}/man/man1/vmware.1 ${MANPREFIX}/man/man1
-	${MKDIR} ${VMDIR}/lib/modules
-
-	${MKDIR} ${PREFIX}/etc/vmware
-	${INSTALL_DATA} ${WRKDIR}/config ${PREFIX}/etc/vmware
-
-	${INSTALL_SCRIPT} ${WRKDIR}/vmware.sh ${PREFIX}/etc/rc.d
-
-	${MKDIR} ${VMDIR}/bin
-	${INSTALL_SCRIPT} ${FILESDIR}/df ${VMDIR}/bin
-	[ -f ${LINUX_DIR}/bin/df ] || ${LN} -s ${VMDIR}/bin/df ${LINUX_DIR}/bin/
-	${INSTALL_SCRIPT} ${WRKSRC}/bin/*.pl ${VMDIR}/bin
-	for i in \
-		 vmnet-bridge vmnet-dhcpd vmnet-sniffer \
-		 vmware-loop vmware-ping vmware-wizard \
-		 ; do \
-		${INSTALL_SCRIPT} ${WRKSRC}/bin/$${i} ${VMDIR}/bin; \
-	done
-	${INSTALL_SCRIPT} -m 4555 ${WRKSRC}/bin/vmware ${VMDIR}/bin
-	${LN} -s ${VMDIR}/bin/vmware ${PREFIX}/bin/
-	${MKDIR} ${VMDIR}/lib
-	${INSTALL_DATA} ${WRKSRC}/lib/config ${VMDIR}/lib
-	${MKDIR} ${VMDIR}/lib/help
-	${INSTALL_DATA} ${WRKSRC}/lib/help/* ${VMDIR}/lib/help
-	${MKDIR} ${VMDIR}/lib/xkeymap
-	${INSTALL_DATA} ${WRKSRC}/lib/xkeymap/* ${VMDIR}/lib/xkeymap
-.if !defined(NOPORTDOCS)
-	${MKDIR} ${PREFIX}/share/doc/vmware
-	${INSTALL_DATA} ${WRKSRC}/doc/* ${PREFIX}/share/doc/vmware
-	${INSTALL_DATA} ${FILESDIR}/README.FreeBSD ${PREFIX}/share/doc/vmware
-.endif
-
-post-install:
-	${LN} -sf ${PREFIX}/etc/vmware /etc/
-	@${CAT} ${PKGMESSAGE}
-
-.include <bsd.port.post.mk>
diff --git a/emulators/vmware/distinfo b/emulators/vmware/distinfo
deleted file mode 100644
index 3c18df7e0018..000000000000
--- a/emulators/vmware/distinfo
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 (VMware-1.1.2-364.tar.gz) = c0c6f4a172cefd8a0cd838d65f9633d4
-MD5 (vmmon-freebsd-0.94.tar.gz) = 741b47111d4e826a7cdbc61ecc868594
-MD5 (vmnet-freebsd-0.10.tar.gz) = 1da694a7a1952c25d6d1dafcf7c361de
diff --git a/emulators/vmware/files/Makefile b/emulators/vmware/files/Makefile
deleted file mode 100644
index 79759423aeb8..000000000000
--- a/emulators/vmware/files/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# $FreeBSD$
-
-SUBDIR=	vmmon-only vmnet-only/freebsd
-
-.include <bsd.subdir.mk>
diff --git a/emulators/vmware/files/README.FreeBSD b/emulators/vmware/files/README.FreeBSD
deleted file mode 100644
index 08ccb3434c55..000000000000
--- a/emulators/vmware/files/README.FreeBSD
+++ /dev/null
@@ -1,84 +0,0 @@
-VMware 1.1 for Linux on FreeBSD.
-$Date: 1999/12/17 00:36:01 $
-$FreeBSD$
-
-Introduction.
-
-This piece of software provides some basic support for running
-the VMware 1.1 for Linux on FreeBSD.
-
-I'm using FreeBSD 4.0 -current system and don't know whether
-this software will work on the 3.X branch.
-
-===
-
-What's done.
-
-At this time I was able to successfully run the following operation systems
-under VMware on FreeBSD:
-
-  - FreeBSD 4.0 Current
-  - Linux (Debian 2.1)
-  - Windows NT
-  - Windows 95 OSR2 (in safe mode :)
-  - MS DOS 7.0 (Part of Win'95)
-
-I think that all platforms supported by VMware should work under FreeBSD.
-	
-
-Installation procedure.
-
-The easiest solution is to obtain the vmware port and try to build it.
-The name of the port is vmware.tar.gz, and it can be downloaded from the 
-following location:
-
-http://www.mindspring.com/~vsilyaev/vmware/files/vmware.tar.gz
-
-If you are like to use the linux proc filesystem emulator, you are need 
-to install the next port:
-
-http://www.mindspring.com/~vsilyaev/vmware/files/linuxproc.tar.gz
-
-At build time, you will get further instructions on how to proceed.
-
-After a successful port installation you will need to obtain a license key 
-to run VMware (you can use an old one for Linux). If you want to obtain 
-a new key from http://www.vmware.com , you will have to select Linux as the 
-'server' platform.
-
-Features currently unsupported
- 
-   - Fullscreen text mode
-	
-   - Mounting vmware virtual drive
-   
-   - Parallel ports were never tested. However, to support bidirectional 
-     transfers, we will need a FreeBSD version of the vmppuser driver.
-
-Caveats.
-
-    - Onle one guest may be runned at one time.
-
-    - Floppy disk detection currently doesn't work. It is assumed that
-      a disk is always present in the floppy drive. Because of that, if you
-      have enabled both IDE and floppy drives in the same VMware session, you
-      _must_ select the right booting order in the Phoenix BIOS Setup.
-      
-    - Doesn't work on a SMP kernel.
-    
-    - Support only for Host networking. Doesn't have a bridgink networking
-      But really this mean, that you are need to enable gateway on
-      our FreeBSD box. And after that virtual machine can communicate 
-      with a rest of the world.
-   
-Copyright issue.
-
-	Unclear. My own code has a BSD-style copyright license,
-	but in order to write it, I used VMware-copyrighted sources.
-	In any case, I'm distributing only my own patch set, and all
-	modified files retain the original copyright information.
-
-Author.
-
-	Vladimir N. Silyaev. 
-	E-Mail: vsilyaev@mindspring.com
diff --git a/emulators/vmware/files/config b/emulators/vmware/files/config
deleted file mode 100644
index 66c1a93c6b33..000000000000
--- a/emulators/vmware/files/config
+++ /dev/null
@@ -1,7 +0,0 @@
-vmware.fullpath = "@@PREFIX@@/lib/vmware/bin/vmware"
-wizard.fullpath = "@@PREFIX@@/lib/vmware/bin/vmware-wizard"
-dhcpd.fullpath = "@@PREFIX@@/lib/vmware/bin/vmnet-dhcpd"
-loop.fullpath = ""@@PREFIX@@/lib/vmware/bin/vmware-loop"
-libdir = "@@PREFIX@@/lib/vmware/lib"
-vmnet1.HostOnlyAddress = "@@HOST_IP@@"
-vmnet1.HostOnlyNetMask = "@@NETMASK@@"
diff --git a/emulators/vmware/files/df b/emulators/vmware/files/df
deleted file mode 100644
index b9db0532e013..000000000000
--- a/emulators/vmware/files/df
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/usr/bin/perl
-# Hacky emulation of GNU df.
-# Intented to use with vmware wizard.
-# Depend from the _absence_ linux version perl in the dir /compat/linux/usr/bin/
-#
-# $FreeBSD$
-#
-@NARGV=('-n');
-$type=0;
-foreach (@ARGV) {
-	exit if $_ eq '-n'; # Aargh it's me again, exit immediatly
-	next if $_ eq '-P';
-	$type=1,next if $_ eq '-T';
-	push @NARGV, $_;
-}
-
-$line = 0;
-
-open(DF,"-|") or exec '/bin/df', @NARGV;
-while(<DF>) {
-   
-   unless ($type) { print $_; next;}
-   @cols = split();
-   if ($line++) {
-	$col = 'ext2fs';
-   } else {
-	$col = 'Type';
-   }
-   @cols = (@cols[0], $col, @cols[1..$#cols]);
-   print join("\t", @cols),"\n";
-}
diff --git a/emulators/vmware/files/vmware.sh b/emulators/vmware/files/vmware.sh
deleted file mode 100644
index 6764ced056e2..000000000000
--- a/emulators/vmware/files/vmware.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# Start or stop vmware
-#
-# $FreeBSD$
-
-vmware_dir=@@PREFIX@@/lib/vmware
-networking=@@NETWORKING@@
-host_ip=@@HOST_IP@@
-netmask=@@NETMASK@@
-
-[ -x $vmware_dir/bin/vmware ] || exit
-exec >/dev/null
-
-case $1 in
-start)
-    kldload ${vmware_dir}/lib/modules/vmmon.ko
-    if [ $networking -eq 1 ]; then
-	kldload ${vmware_dir}/lib/modules/vmnet.ko
-	echo -n >/dev/vmnet1
-	ifconfig vmnet1 $host_ip netmask $netmask
-    fi
-    echo -n " VMware" >/dev/tty
-    ;;
-
-stop)
-    kldunload vmmon
-    if [ $networking -eq 1 ]; then
-	ifconfig vmnet1 down
-	ifconfig vmnet1 delete $host_ip
-	kldunload vmnet
-    fi
-    ;;
-
-*)
-    echo "usage: `basename $0` {start|stop}" >&2
-    exit 64
-    ;;
-esac
diff --git a/emulators/vmware/pkg-descr b/emulators/vmware/pkg-descr
deleted file mode 100644
index 400a2f031035..000000000000
--- a/emulators/vmware/pkg-descr
+++ /dev/null
@@ -1,14 +0,0 @@
-This is the Linux version of the VMware virtual machine emulator made
-to run on FreeBSD using the Linux compatibility mode.  VMware can be
-used to run Microsoft MS-DOS, Windows 95/98/NT/2000, Linux, FreeBSD,
-or any other operating system that runs on the i486.
-
-Official VMware, Inc. web site:
-WWW:	http://www.vmware.com/
-
-
-We all are thankful to Vladimir N. Silyaev for porting vmmon/vmnet
-modules to FreeBSD.  Have a look at his page for the latest
-information:
-
-	http://www.mindspring.com/~vsilyaev/vmware/
diff --git a/emulators/vmware/pkg-message b/emulators/vmware/pkg-message
deleted file mode 100644
index 46a622351f49..000000000000
--- a/emulators/vmware/pkg-message
+++ /dev/null
@@ -1,11 +0,0 @@
-************************************************************
-Get Linux procfs ready and initialize vmmon/vmnet as follows:
-
-	${PREFIX}/etc/rc.d/vmware.sh start
-
-then you'll be ready to start vmware.
-
-Don't miss the documents installed:
-
-	vmware(1) ${PREFIX}/share/doc/vmware/*
-************************************************************
diff --git a/emulators/vmware/pkg-plist b/emulators/vmware/pkg-plist
deleted file mode 100644
index 6bf05e1eeef5..000000000000
--- a/emulators/vmware/pkg-plist
+++ /dev/null
@@ -1,124 +0,0 @@
-bin/vmware
-etc/rc.d/vmware.sh
-etc/vmware/config
-lib/vmware/bin/df
-lib/vmware/bin/vmware
-lib/vmware/bin/vmnet-bridge
-lib/vmware/bin/vmnet-dhcpd
-lib/vmware/bin/vmnet-sniffer
-lib/vmware/bin/vmware-config.pl
-lib/vmware/bin/vmware-mount.pl
-lib/vmware/bin/vmware-uninstall.pl
-lib/vmware/bin/vmware-loop
-lib/vmware/bin/vmware-ping
-lib/vmware/bin/vmware-wizard
-lib/vmware/lib/config
-lib/vmware/lib/help/AutoFit.htm
-lib/vmware/lib/help/ConfigDiskPartition.htm
-lib/vmware/lib/help/ConfigDisks.htm
-lib/vmware/lib/help/ConfigEditor.htm
-lib/vmware/lib/help/ConfigEthernet.htm
-lib/vmware/lib/help/ConfigFloppy.htm
-lib/vmware/lib/help/ConfigMemory.htm
-lib/vmware/lib/help/ConfigMisc.htm
-lib/vmware/lib/help/ConfigParallel.htm
-lib/vmware/lib/help/ConfigSerial.htm
-lib/vmware/lib/help/ConfigSound.htm
-lib/vmware/lib/help/ConfigWiz.htm
-lib/vmware/lib/help/Configuration.htm
-lib/vmware/lib/help/Fit.htm
-lib/vmware/lib/help/FullScreen.gif
-lib/vmware/lib/help/Fullscreen.htm
-lib/vmware/lib/help/GeneralInput.htm
-lib/vmware/lib/help/GeneralMemory.htm
-lib/vmware/lib/help/GeneralPreferences.htm
-lib/vmware/lib/help/Glossary.htm
-lib/vmware/lib/help/Help.gif
-lib/vmware/lib/help/Interacting.htm
-lib/vmware/lib/help/Introduction.htm
-lib/vmware/lib/help/Power.htm
-lib/vmware/lib/help/PowerOff.gif
-lib/vmware/lib/help/PowerOff.htm
-lib/vmware/lib/help/PowerOn.gif
-lib/vmware/lib/help/PowerOn.htm
-lib/vmware/lib/help/PowerReset.gif
-lib/vmware/lib/help/PowerReset.htm
-lib/vmware/lib/help/Resume.gif
-lib/vmware/lib/help/Resume.htm
-lib/vmware/lib/help/RunVM.htm
-lib/vmware/lib/help/SendCtlAltDel.htm
-lib/vmware/lib/help/Setremdev.htm
-lib/vmware/lib/help/Settings.htm
-lib/vmware/lib/help/ShowAllHints.htm
-lib/vmware/lib/help/StatusBar.htm
-lib/vmware/lib/help/Suspend.gif
-lib/vmware/lib/help/Suspend.htm
-lib/vmware/lib/help/ToolbarButtons.htm
-lib/vmware/lib/help/View.htm
-lib/vmware/lib/help/Wizcd.htm
-lib/vmware/lib/help/Wizcongrats.htm
-lib/vmware/lib/help/Wizdisk.htm
-lib/vmware/lib/help/Wizdisk3.htm
-lib/vmware/lib/help/WizdiskType.htm
-lib/vmware/lib/help/Wizfloppy.htm
-lib/vmware/lib/help/Wiznetwork.htm
-lib/vmware/lib/help/Wizos.htm
-lib/vmware/lib/help/Wizpath.htm
-lib/vmware/lib/help/toc.htm
-lib/vmware/lib/modules/vmmon.ko
-lib/vmware/lib/modules/vmnet.ko
-lib/vmware/lib/xkeymap/be101
-lib/vmware/lib/xkeymap/be104
-lib/vmware/lib/xkeymap/chde101
-lib/vmware/lib/xkeymap/chde104
-lib/vmware/lib/xkeymap/chfr101
-lib/vmware/lib/xkeymap/chfr104
-lib/vmware/lib/xkeymap/de101
-lib/vmware/lib/xkeymap/de104
-lib/vmware/lib/xkeymap/dk101
-lib/vmware/lib/xkeymap/dk104
-lib/vmware/lib/xkeymap/es101
-lib/vmware/lib/xkeymap/es104
-lib/vmware/lib/xkeymap/fi101
-lib/vmware/lib/xkeymap/fi104
-lib/vmware/lib/xkeymap/fr101
-lib/vmware/lib/xkeymap/fr104
-lib/vmware/lib/xkeymap/gb101
-lib/vmware/lib/xkeymap/gb104
-lib/vmware/lib/xkeymap/is101
-lib/vmware/lib/xkeymap/is104
-lib/vmware/lib/xkeymap/it101
-lib/vmware/lib/xkeymap/it104
-lib/vmware/lib/xkeymap/jp106
-lib/vmware/lib/xkeymap/jp109
-lib/vmware/lib/xkeymap/no101
-lib/vmware/lib/xkeymap/no104
-lib/vmware/lib/xkeymap/pt101
-lib/vmware/lib/xkeymap/pt104
-lib/vmware/lib/xkeymap/se101
-lib/vmware/lib/xkeymap/se104
-lib/vmware/lib/xkeymap/us101
-lib/vmware/lib/xkeymap/us104
-share/doc/vmware/CHANGES
-share/doc/vmware/DHCP-COPYRIGHT
-share/doc/vmware/EULA
-share/doc/vmware/INSTALL
-share/doc/vmware/README
-share/doc/vmware/README.FreeBSD
-@exec mkdir -p /compat/linux/dev;for n in 0 1 2 3 4 5 6 7 8 9; do ln -s /dev/ttyv$n /compat/linux/dev/tty$n;done
-@exec ln -s /dev/ttyva /compat/linux/dev/tty10
-@exec ln -s /dev/ttyvb /compat/linux/dev/tty11
-@exec mknod /compat/linux/dev/hda b 0 0x00010002
-@exec mknod /compat/linux/dev/hdb b 0 0x0001000a
-@exec ln -sf %D/etc/vmware /etc/
-@exec mknod /dev/vmmon c 200 0
-@exec mknod /dev/vmnet1 c 201 1
-@unexec rm -f /etc/vmware /dev/vmmon /dev/vmnet1 /compat/linux/bin/df /compat/linux/dev/tty[0-9]* /compat/linux/dev/hd?
-@dirrm etc/vmware
-@dirrm lib/vmware/bin
-@dirrm lib/vmware/lib/help
-@dirrm lib/vmware/lib/modules
-@dirrm lib/vmware/lib/xkeymap
-@dirrm lib/vmware/lib
-@dirrm lib/vmware
-@dirrm share/doc/vmware
diff --git a/emulators/vmware/scripts/configure b/emulators/vmware/scripts/configure
deleted file mode 100644
index 9adf59bf0698..000000000000
--- a/emulators/vmware/scripts/configure
+++ /dev/null
@@ -1,106 +0,0 @@
-#!/bin/sh
-
-[ "_$VMNET_HOST_IP" = _ ] && VMNET_HOST_IP="192.168.254.1"
-[ "_$VMNET_NETMASK" = _ ] && VMNET_NETMASK="255.255.255.0"
-
-host_ip=$VMNET_HOST_IP
-netmask=$VMNET_NETMASK
-title="VMware network options"
-
-get_network_settings() {
-    result=`/usr/bin/dialog --title "$title" --clear --inputbox \
-"\n"\
-"What will be the IP address of your host\n"\
-"on your private network?:"\
-    10 50 $host_ip \
-    2>&1 >/dev/tty `
-
-    case $? in
-    0)
-	if [ -z "$result" ]; then
-	    return 1
-	fi
-	host_ip=$result
-	;;
-    1)	
-	return 1
-	;;
-    esac
-
-    result=`/usr/bin/dialog --title "$title" --clear --inputbox \
-"\n"\
-"What will be the netmask of your private\n"\
-"network?:"\
-    10 50 $netmask \
-    2>&1 >/dev/tty `
-
-    case $? in
-    0)
-	if [ -z "$result" ]; then
-	    return 1
-	fi
-	netmask=$result
-	;;
-    1)	
-	return 1
-	;;
-    esac
-    return 0;
-}
-
-do_network() {
-    while true; do
-	get_network_settings
-
-	/usr/bin/dialog --title "Confirmation" --clear --yesno \
-"\n"\
-"Are the following options correct?\n\n"\
-"IP address: $host_ip\n"\
-"Netmask:    $netmask\n"\
-	10 50
-	[ $? -eq 0 ] && return 0
-
-	/usr/bin/dialog --title "Confirmation" --clear --yesno \
-"\n"\
-"Do you want to edit network options again?\n"\
-	10 50
-	[ $? -eq 0 ] && continue
-
-	/usr/bin/dialog --title "Confirmation" --clear --yesno \
-"\n"\
-"Do you want to continue without networking?\n"\
-	10 50
-	[ $? -eq 0 ] && return 1
-
-	host_ip=$VMNET_HOST_IP
-	netmask=$VMNET_NETMASK
-
-	return 0;
-    done
-}
-
-networking=0
-if [ _$BATCH = _ ]; then
-    do_network
-
-    if [ $? -eq 0 ]; then
-	networking=1
-	/usr/bin/dialog --title "$title" --infobox \
-"\n"\
-"The following options will be used.\n\n"\
-"IP address: $host_ip\n"\
-"Netmask:    $netmask\n"\
-	10 50
-    fi
-else #BATCH
-    [ -f ${WRKDIR}/Makefile.inc.net ] && exit
-fi #BATCH
-
-(
-exec > ${WRKDIR}/Makefile.inc.net
-
-echo '#' `date`
-echo VMNET_HOST_IP=$host_ip
-echo VMNET_NETMASK=$netmask
-echo VMNET_NETWORKING=$networking
-)
diff --git a/emulators/vmware/scripts/extract b/emulators/vmware/scripts/extract
deleted file mode 100644
index 7d97cc2d9f09..000000000000
--- a/emulators/vmware/scripts/extract
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-case $1 in
-vmmon*)
-    target=vmmon
-    ;;
-vmnet*)
-    target=vmnet
-    ;;
-*)
-    echo unknown patch $1
-    exit 64
-    ;;
-esac
-dir=${WRKSRC}/lib/modules/source
-tar -xf ${dir}/${target}.tar -C ${WRKSRC}
-tar -zxf $1 -C ${WRKSRC}
-if [ $target = vmmon ] ; then
-    Makefile=${WRKSRC}/vmmon-only/Makefile
-    mv ${Makefile}.FreeBSD $Makefile
-fi
-
-cat ${WRKSRC}/${target}-freebsd.diff
diff --git a/emulators/vmware/scripts/pre-install b/emulators/vmware/scripts/pre-install
deleted file mode 100644
index 771445b0ac01..000000000000
--- a/emulators/vmware/scripts/pre-install
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-
-echo Setup Linux compatible /dev directory
-linux_dev=${LINUX_DIR}/dev
-if [ ! -d $linux_dev ];  then
-    echo Creating $linux_dev
-    mkdir $linux_dev
-    chown root:wheel $linux_dev
-    chmod 755 $linux_dev
-fi
-echo Creating $linux_dev/tty\?
-for n in 0 1 2 3 4 5 6 7 8 9; do
-    ln -s /dev/ttyv$n $linux_dev/tty`expr 1 + $n`;
-done
-ln -s /dev/ttyva ${linux_dev}/tty11
-ln -s /dev/ttyvb ${linux_dev}/tty12
-ln -s ${linux_dev}/tty1 ${linux_dev}/tty0
-echo Creating $linux_dev/hd\?
-mknod ${linux_dev}/hda b 0 0x00010002
-mknod ${linux_dev}/hdb b 0 0x0001000a
-# Do not enable below, because vmware-wizard is locked when
-# doing something like access("/dev/hdc"...)
-#mknod ${linux_dev}/hdc b 0 0x00010012
-#mknod ${linux_dev}/hdd b 0 0x0001001a
-echo Done