aboutsummaryrefslogtreecommitdiff
path: root/graphics/utah-glx
diff options
context:
space:
mode:
authorChris Piazza <cpiazza@FreeBSD.org>1999-12-04 22:54:47 +0000
committerChris Piazza <cpiazza@FreeBSD.org>1999-12-04 22:54:47 +0000
commita351214f991b13fe8bb8aab5a4d9e37902fd0ce3 (patch)
tree37ab15d67280fab7eda019c82c7a7dcc4b62d022 /graphics/utah-glx
parent654938b6cf2df0cf6f88c219389baae891beced5 (diff)
downloadports-a351214f991b13fe8bb8aab5a4d9e37902fd0ce3.tar.gz
ports-a351214f991b13fe8bb8aab5a4d9e37902fd0ce3.zip
Notes
Diffstat (limited to 'graphics/utah-glx')
-rw-r--r--graphics/utah-glx/Makefile333
-rw-r--r--graphics/utah-glx/distinfo3
-rw-r--r--graphics/utah-glx/pkg-comment1
-rw-r--r--graphics/utah-glx/pkg-descr21
-rw-r--r--graphics/utah-glx/pkg-message29
-rw-r--r--graphics/utah-glx/pkg-plist31
6 files changed, 418 insertions, 0 deletions
diff --git a/graphics/utah-glx/Makefile b/graphics/utah-glx/Makefile
new file mode 100644
index 000000000000..ed6942d7f286
--- /dev/null
+++ b/graphics/utah-glx/Makefile
@@ -0,0 +1,333 @@
+# New ports collection makefile for: GLX
+# Version required: CVS
+# Date created: 13 September 1999
+# Whom: Marc E E van Woerkom <van.woerkom@netcologne.de>
+#
+# $Id:$
+#
+#
+# Notes:
+#
+# . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)!
+# This port is set up for 3.3.5
+#
+# . Mesa-3.0 has to be uninstalled before this port builds!
+# Why? Because we need to create a glx aware version.
+#
+# . This stuff has been tested with
+# - a Diamond Viper 330 (RIVA 128),
+# - a Diamond Viper 550 (RIVA TNT),
+# - and was reported to work with a Matrox G200 card
+#
+# . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now
+# so I rolled my own snapshot of the open project glx code.
+# It is slightly outdated but will be updated soon.
+#
+# . The current Mesa3 port for FreeBSD does not stop at the 'patch'
+# target, but will instead try to build X11 immediatley if XFree86
+# is not present.
+# For this version (XFree86 3.3.5 needs no patches for glx yet) we
+# ignore this wrong behaviour.
+#
+# . We need tclsh for building - the choice for tclsh 8.0 is due to
+# lack of time to include a proper selection scheme
+#
+# . You can set CHIPSET_3D appropriately in /etc/make.conf if the
+# question bugs you
+#
+
+DISTNAME= glx-990802
+CATEGORIES= graphics
+MASTER_SITES= http://www.freebsd.org/~3d/distfiles/glx/XF3.3.5/
+DISTFILES= ${DISTNAME}.tar.bz2 \
+ riva-x-glx.faq.bz2 \
+ Mesa-3_0.diff.bz2
+
+MAINTAINER= 3d@freebsd.org
+
+# search for tclsh, if not present build it
+BUILD_DEPENDS= tclsh8.0:${PORTSDIR}/lang/tcl80
+
+# These settings are here to make future updates to this port easier
+#PATCH_XFREE= yes
+PATCH_MESA= yes
+
+.if defined(PATCH_XFREE)
+BUILD_DEPENDS= /nonexistent:${PORTSDIR}/x11/XFree86:patch
+.endif
+.if defined(PATCH_MESA)
+BUILD_DEPENDS= /nonexistent:${PORTSDIR}/graphics/Mesa3:patch
+.endif
+
+USE_BZIP2= yes
+
+EXTRACT_ONLY= ${DISTNAME}.tar.bz2
+
+DIST_SUBDIR= glx
+
+WRKSRC= ${WRKDIR}/${DISTNAME}
+
+# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX
+#USE_X_PREFIX= yes
+PREFIX= ${X11BASE}
+
+XFCONFIG= /etc/XF86Config
+
+XFREEVER= 3.3.5
+XFREEDIR= ${PORTSDIR}/x11/XFree86/work/xc
+
+MESAVER= 3.0
+MESADIR= ${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0
+
+# As we ask for CHIPSET_3D if not set
+IS_INTERACTIVE= YES
+
+# comment out the following line,
+# if you want to build with Imake (Linux/alpha favours that)
+USE_AUTOCONF= yes
+GNU_CONFIGURE= yes
+
+# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards
+.if defined(CHIPSET_3D)
+.if ${CHIPSET_3D} == RIVA
+WITH_CHIPSET= --with-chipset=tnt
+.endif
+.if ${CHIPSET_3D} == MGA
+WITH_CHIPSET= --with-chipset=mga
+.endif
+.endif
+
+CONFIGURE_ARGS= --with-mesa=${MESADIR} \
+ --with-mesa-version=mesa30 \
+ ${WITH_CHIPSET} # --with-mmx-asm --with-3dnow-asm
+
+USE_GMAKE= yes
+
+.if !defined(GNU_CONFIGURE)
+USE_IMAKE= yes
+.endif
+
+.include <bsd.port.pre.mk>
+
+#
+# before 'patch'
+#
+# . apply some patches to the Mesa 3.0 distribution
+#
+pre-patch:
+.if defined(PATCH_XFREE)
+ @${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .."
+ cd ${XFREEDIR}; \
+ ${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff
+.endif
+.if defined(PATCH_MESA)
+ @${ECHO} "=> Checking Mesa-${MESAVER} installation .."
+ @if \
+ pkg_info -e "Mesa-${MESAVER}"; \
+ then \
+ ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \
+ ${ECHO} "Aborting.."; \
+ ${FALSE} ; \
+ fi
+.if exists(${MESADIR}/../.glxpatch_done)
+ @${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .."
+.else
+ @${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .."
+ @${ECHO} "(ignore the rejections, as they should happen in comments only)"
+ -cd ${MESADIR}; \
+ bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f
+ ${TOUCH} ${MESADIR}/../.glxpatch_done
+.endif
+.endif
+
+#
+# before 'configure'
+#
+# . patch glx configure.in, libGL/Makefile.in,
+# serverglx/Makefile.in (yes, this is an ugly hack)
+#
+pre-configure:
+.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA
+ @${ECHO}
+ @${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use
+ @${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card,
+ @${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter
+ @${FALSE}
+.endif
+.if defined(GNU_CONFIGURE)
+ @${ECHO} "=> Adjusting ${WRKSRC}/configure.in .."
+ @cd ${WRKSRC}; \
+ ${SED} -e 's;tclsh;tclsh8\.0;g' \
+ <configure.in >configure.in.new; \
+ ${MV} configure.in.new configure.in
+ @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .."
+ @cd ${WRKSRC}/libGL; \
+ ${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \
+ <Makefile.in >Makefile.in.new; \
+ ${MV} Makefile.in.new Makefile.in
+ @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .."
+ @cd ${WRKSRC}/servGL/serverglx; \
+ ${SED} -e 's;tclsh;tclsh8\.0;g' \
+ <Makefile.in >Makefile.in.new; \
+ ${MV} Makefile.in.new Makefile.in
+.endif
+
+#
+# after 'configure'
+#
+# . only for the old IMAKE style configuration
+#
+post-configure:
+.if !defined(GNU_CONFIGURE)
+ @${ECHO} "Using IMAKE"
+ @${ECHO} "=> Adjusting ${WRKSRC}/Config .."
+ @cd ${WRKSRC}; \
+ ${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \
+ -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \
+ <Config.in >Config;
+ @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .."
+ @cd ${WRKSRC}/libGL; \
+ ${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
+ ${MV} Imakefile.new Imakefile
+ @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .."
+ @cd ${WRKSRC}/servGL/serverglx; \
+ ${SED} -e 's;tclsh;tclsh8\.0;' <Imakefile >Imakefile.new; \
+ ${MV} Imakefile.new Imakefile
+.endif
+
+#
+# before 'build':
+#
+# . build a glx aware Mesa lib
+# . create makefiles (old IMAKE style configuration)
+#
+pre-build:
+.if defined(PATCH_XFREE)
+ @${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .."
+ cd ${XFREEDIR}/../..; \
+ ${MAKE} all install
+.endif
+.if defined(PATCH_MESA)
+ @${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .."
+ cd ${MESADIR}/../..; \
+ ${MAKE} all install
+.endif
+.if !defined(GNU_CONFIGURE)
+ @${ECHO} "=> Creating makefiles .."
+ cd ${WRKSRC}; \
+ ${XMKMF}; \
+ ${MAKE} Makefile; \
+ ${MAKE} Makefiles
+.endif
+
+#
+# before 'install':
+#
+# . check for proper installed XFree86 version (3.3.4 or higher)
+# . check for glx installation (please deinstall)
+# . check for Mesa 3.0 installtion (please deinstall)
+#
+pre-install:
+ @${ECHO} "=> Checking XFree86 installation .."
+ @if \
+ pkg_info -e "XFree86-3.3.4"; \
+ then \
+ ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \
+ elif \
+ pkg_info -e "XFree86-3.3.5"; \
+ then \
+ ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \
+ elif \
+ pkg_info -e "XFree86-3.3.6"; \
+ then \
+ ${ECHO} "Found XFree86 3.3.6 - this port should work"; \
+ elif \
+ pkg_info -e "XFree86-3.3.3.1"; \
+ then \
+ ${ECHO} ""; \
+ ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \
+ ${ECHO} "has been patched for use with glx!"; \
+ ${ECHO} ""; \
+ ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \
+ ${ECHO} ""; \
+ ${ECHO} "(We continue with fingers crossed)"; \
+ ${ECHO} ""; \
+ else \
+ ${ECHO} ""; \
+ ${ECHO} "This port depends on having a proper version of XFree86"; \
+ ${ECHO} "installed - preferably ${XFREEVER}!"; \
+ ${ECHO} ""; \
+ ${ECHO} "Visit 'http://www.freebsd.org/~3d' for more information"; \
+ ${ECHO} ""; \
+ ${ECHO} "Aborting.."; \
+ ${FALSE} ; \
+ fi
+
+#
+# after 'install':
+#
+# . install some docs
+# . move old Mesa lib away (old IMAKE style configuration)
+# . check XFree86 configuration file for colordepth (RIVA only)
+# . check XFree86 configuration file for glx module
+# . give some hints
+#
+post-install:
+.if !defined(NOPORTDOCS)
+ @${ECHO} "=> Installing documentation .."
+ ${MKDIR} ${PREFIX}/share/doc/riva-glx
+ ${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx
+ ${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx
+ ${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx
+
+.endif
+.if !defined(GNU_CONFIGURE)
+ @${ECHO} "=> Adjusting links .."
+ -${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old
+ -${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old
+ -${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a
+ -${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14
+.endif
+.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA
+ @${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .."
+ @${ECHO} ""
+ @if \
+ ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \
+ then \
+ ${ECHO} ""; \
+ ${ECHO} "Found something."; \
+ else \
+ ${ECHO} "Nope, nothing found - please use"; \
+ ${ECHO} ""; \
+ ${ECHO} " DefaultColorDepth 16"; \
+ ${ECHO} ""; \
+ ${ECHO} "or"; \
+ ${ECHO} ""; \
+ ${ECHO} " DefaultColorDepth 15"; \
+ ${ECHO} ""; \
+ ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \
+ fi
+.endif
+ @${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .."
+ @${ECHO} ""
+ @if \
+ ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \
+ ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \
+ ${GREP} -B2 '^ *EndSection *$$' | \
+ ${GREP} -A2 '^ *Section *"Module" *$$'; \
+ then \
+ ${ECHO} ""; \
+ ${ECHO} "Looks OK to me."; \
+ else \
+ ${ECHO} "Nope, not found - please add"; \
+ ${ECHO} ""; \
+ ${ECHO} " Section \"Module\""; \
+ ${ECHO} " Load \"glx.so\""; \
+ ${ECHO} " EndSection"; \
+ ${ECHO} ""; \
+ ${ECHO} "to the end of your ${XFCONFIG} file!"; \
+ fi
+ @${ECHO} "=> Giving last advice .."
+ @${CAT} ${PKGDIR}/MESSAGE
+
+.include <bsd.port.post.mk>
diff --git a/graphics/utah-glx/distinfo b/graphics/utah-glx/distinfo
new file mode 100644
index 000000000000..05f85047abac
--- /dev/null
+++ b/graphics/utah-glx/distinfo
@@ -0,0 +1,3 @@
+MD5 (glx/glx-990802.tar.bz2) = 5b04e03339dfffca73b6a11ce64cd59e
+MD5 (glx/riva-x-glx.faq.bz2) = 6c5b499db143f071c6f69ba6c43db4c4
+MD5 (glx/Mesa-3_0.diff.bz2) = 5631bc2d7a54c366e072a72e45fca6c7
diff --git a/graphics/utah-glx/pkg-comment b/graphics/utah-glx/pkg-comment
new file mode 100644
index 000000000000..2183297aafc6
--- /dev/null
+++ b/graphics/utah-glx/pkg-comment
@@ -0,0 +1 @@
+Hardware accelerated OpenGL 3d graphics (RIVA & G200/G400)
diff --git a/graphics/utah-glx/pkg-descr b/graphics/utah-glx/pkg-descr
new file mode 100644
index 000000000000..a03f74f97bad
--- /dev/null
+++ b/graphics/utah-glx/pkg-descr
@@ -0,0 +1,21 @@
+OpenGL hardware acceleration for RIVA based cards and Matrox G200.
+
+To bridge the time until the XFree86-4 release, this port will build a
+Mesa 3.0 Graphics Library that makes use of the 3d hardware acceleration
+features of nvidia's RIVA 128/128ZX and RIVA TNT/TNT2/VANTAGE based
+graphics cards and the Matrox G200/G400.
+
+WARNING:
+
+Please note that this build might need a considerable amount of time.
+(AMD K6/300MHz/196MB/SCSI: XFree86 3 hours, Mesa 1/2 hour, glx 10 min)
+
+See Jordan K Hubbard's article in the July '99 issue of
+
+ http://www.freebsdzine.org
+
+for more information or visit
+
+WWW: http://www.freebsd.org/~3d
+
+Marc E E van Woerkom <3d@freebsd.org>
diff --git a/graphics/utah-glx/pkg-message b/graphics/utah-glx/pkg-message
new file mode 100644
index 000000000000..2054bcf326f7
--- /dev/null
+++ b/graphics/utah-glx/pkg-message
@@ -0,0 +1,29 @@
+
+Additional Notes:
+-----------------
+
+If you built an SVGA server with 3d hardware acceleration for a nvidia card
+(RIVA 128, TNT, TNT2, TNT2 Ultra ..) please check that
+
+- you changed the default colour depth to 16 or 15 in your /etc/XF86Config
+ file (keyword: DefaultColorDepth) plus
+
+and (this holds for Matrox G200/G400 too) check if
+
+- you added to /etc/XF86Config (outside of any other section) the
+ following 3 lines:
+
+ Section "Module"
+ Load "glx.so"
+ EndSection
+
+- you enabled System V shared memory support in your kernel
+
+
+Things you might want to do:
+
+. Try out ports/x11/xscreensaver (e.g. superquadrics) as an sample OpenGL
+ application,
+. read the article or
+. have a look at the docs in X11/share/doc/riva-glx, esp the FAQ or
+. visit http://www.freebsd.org/~3d
diff --git a/graphics/utah-glx/pkg-plist b/graphics/utah-glx/pkg-plist
new file mode 100644
index 000000000000..4ac032ed9a38
--- /dev/null
+++ b/graphics/utah-glx/pkg-plist
@@ -0,0 +1,31 @@
+include/GL/GLXproto.h
+include/GL/dosmesa.h
+include/GL/foomesa.h
+include/GL/fxmesa.h
+include/GL/ggimesa.h
+include/GL/gl.h
+include/GL/gl_mangle.h
+include/GL/glu.h
+include/GL/glu_mangle.h
+include/GL/glut.h
+include/GL/glx.h
+include/GL/glx_mangle.h
+include/GL/mglmesa.h
+include/GL/osmesa.h
+include/GL/osmesa3.h
+include/GL/svgamesa.h
+include/GL/wmesa.h
+include/GL/xmesa.h
+lib/libGL.a
+lib/libGL.so.1
+lib/libMesaGL.a
+lib/libMesaGL.so.14
+lib/libMesaGLU.a
+lib/libMesaGLU.so.14
+lib/libglut.a
+lib/libglut.so.3
+lib/modules/glx.so
+share/doc/riva-glx/README
+share/doc/riva-glx/riva-x-glx.faq.bz2
+share/doc/riva-glx/tested.html
+@dirrm share/doc/riva-glx