5 files changed, 150 insertions, 605 deletions

diff --git a/lang/gcc34/files/alpha-freebsd.h b/lang/gcc34/files/alpha-freebsd.h
index 6330e62d8fc9..a227b9444b9e 100644
--- a/lang/gcc34/files/alpha-freebsd.h
+++ b/lang/gcc34/files/alpha-freebsd.h
@@ -1,6 +1,6 @@
-/* Definitions of target machine for GNU compiler,
-   for Alpha FreeBSD systems.
-   Copyright (C) 1998 Free Software Foundation, Inc.
+/* Definitions for DEC Alpha/AXP running FreeBSD using the ELF format
+   Copyright (C) 2000 Free Software Foundation, Inc.
+   Contributed by BSDi, written by David O'Brien <obrien@FreeBSD.org>
 
 This file is part of GNU CC.
 
@@ -18,522 +18,115 @@ You should have received a copy of the GNU General Public License
 along with GNU CC; see the file COPYING.  If not, write to
 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
-/* This is used on Alpha platforms that use the ELF format.
-   This was taken from the NetBSD configuration, and modified
-   for FreeBSD/alpha by Hidetoshi Shimokawa <simokawa@FreeBSD.ORG> */
 
-/* $FreeBSD: /tmp/pcvs/ports/lang/gcc34/files/Attic/alpha-freebsd.h,v 1.6 2000-09-05 16:59:10 obrien Exp $ */
+#undef  CPP_PREDEFINES
+#define CPP_PREDEFINES \
+  "-D__ELF__ -Dunix -D__FreeBSD__ -Asystem(unix) -Asystem(bsd) -Asystem(FreeBSD)"
+
+/* Provide a CPP_SPEC appropriate for FreeBSD/alpha.  Besides the dealing with
+   the GCC option `-posix', and PIC issues as on all FreeBSD platforms, we must
+   deal with the Alpha's FP issues.  */
+
+#undef  CPP_SPEC
+#define CPP_SPEC "%(cpp_cpu)						\
+  %{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__}		\
+  %{posix:-D_POSIX_SOURCE}						\
+  %{mieee:-D_IEEE_FP}							\
+  %{mieee-with-inexact:-D_IEEE_FP -D_IEEE_FP_INEXACT}"
+
+#undef  LINK_SPEC
+#define LINK_SPEC "-m elf64alpha %{G*} %{relax:-relax}			\
+  %{p:%e`-p' not supported; use `-pg' and gprof(1)}			\
+  %{Wl,*:%*}								\
+  %{assert*} %{R*} %{rpath*} %{defsym*}					\
+  %{shared:-Bshareable %{h*} %{soname*}}				\
+  %{symbolic:-Bsymbolic}						\
+  %{!shared:								\
+    %{!static:								\
+      %{rdynamic:-export-dynamic}					\
+      %{!dynamic-linker:-dynamic-linker /usr/libexec/ld-elf.so.1}}	\
+    %{static:-Bstatic}}"
 
+/* Provide an ASM_SPEC appropriate for a FreeBSD/Alpha target.  This differs
+   from the generic FreeBSD ASM_SPEC in that no special handling of PIC is
+   necessary on the Alpha.  */
+/* Per Richard Henderson <rth@cygnus.com>, it is better to use the `.arch'
+   directive in the assembly file.  alpha/elf.h gives us this in
+   "ASM_FILE_START".
+#undef  ASM_SPEC
+#define ASM_SPEC " %| %{mcpu=*:-m%*}"
+*/
 
-#undef OBJECT_FORMAT_COFF
-#undef EXTENDED_COFF
-#define OBJECT_FORMAT_ELF
+/* XXX, if FreeBSD/Alpha grows a crti.o file, we can use the alpha/elf.h
+   definition.  */
+#undef	STARTFILE_SPEC
+#define STARTFILE_SPEC \
+  "%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}	\
+     %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
 
-/* This is BSD, so it wants DBX format. */
+/* Provide a ENDFILE_SPEC appropriate for ELF.  Here we tack on the
+   magical crtend.o file which provides part of the support for
+   getting C++ file-scope static object constructed before entering
+   `main'.  */
+/* XXX, if FreeBSD/Alpha grows a crtn.o file, we can use the alpha/elf.h
+   definition.  */
 
-#define DBX_DEBUGGING_INFO
+#undef	ENDFILE_SPEC
+#define ENDFILE_SPEC \
+  "%{!shared:crtend.o%s} %{shared:crtendS.o%s}"
 
-/* This is the char to use for continuation (in case we need to turn
-   continuation back on). */
 
-#undef DBX_CONTIN_CHAR
-#define DBX_CONTIN_CHAR '?'
+/************************[  Target stuff  ]***********************************/
 
-#undef ASM_FINAL_SPEC
+/* Define the actual types of some ANSI-mandated types.  
+   Needs to agree with <machine/ansi.h>.  GCC defaults come from c-decl.c,
+   c-common.c, and config/<arch>/<arch>.h.  */
 
-/* Names to predefine in the preprocessor for this target machine.
-   XXX FreeBSD, by convention, shouldn't do __alpha, but lots of applications
-   expect it because that's what OSF/1 does. */
+/* alpha.h gets this wrong for FreeBSD.  We use the GCC defaults instead.  */
+#undef WCHAR_TYPE
 
-#undef TARGET_VERSION
-#define TARGET_VERSION fprintf (stderr, " (FreeBSD/alpha ELF)");
+#undef  WCHAR_UNSIGNED
+#define WCHAR_UNSIGNED 0
 
-#undef TARGET_DEFAULT
-#define TARGET_DEFAULT (MASK_FP | MASK_FPREGS | MASK_GAS)
+#undef  WCHAR_TYPE_SIZE
+#define WCHAR_TYPE_SIZE 32
 
-#undef CPP_PREDEFINES
-#define CPP_PREDEFINES \
-  "-D__alpha__ -D__alpha -D__ELF__ -Acpu(alpha) -Amachine(alpha)"  \
-  FBSD_CPP_PREDEFINES
+/* Handle cross-compilation on 32-bits machines (such as i386) for 64-bits
+   machines (Alpha in this case).  */
 
-#undef CPP_SPEC
-#define CPP_SPEC "%{posix:-D_POSIX_SOURCE}"
+#if defined(__i386__)
+#undef  HOST_BITS_PER_LONG
+#define HOST_BITS_PER_LONG	32
+#undef  HOST_WIDE_INT
+#define HOST_WIDE_INT		long long
+#undef  HOST_BITS_PER_WIDE_INT
+#define HOST_BITS_PER_WIDE_INT	64
+#endif
 
-/* Make gcc agree with <machine/ansi.h> */
+#undef  TARGET_VERSION
+#define TARGET_VERSION fprintf (stderr, " (FreeBSD/alpha ELF)");
 
-#undef WCHAR_TYPE
-#define WCHAR_TYPE "int"
+#define TARGET_ELF		1
 
-#undef WCHAR_UNSIGNED
-#define WCHAR_UNSIGNED 0
+#undef  TARGET_DEFAULT
+#define TARGET_DEFAULT (MASK_FP | MASK_FPREGS | MASK_GAS)
 
-#undef WCHAR_TYPE_SIZE
-#define WCHAR_TYPE_SIZE 32
+#undef HAS_INIT_SECTION
 
 /* Output assembler code to FILE to increment profiler label # LABELNO
    for profiling a function entry.  Under FreeBSD/Alpha, the assembler does
    nothing special with -pg. */
 
-#undef FUNCTION_PROFILER
-#define FUNCTION_PROFILER(FILE, LABELNO)			\
+#undef  FUNCTION_PROFILER
+#define FUNCTION_PROFILER(FILE, LABELNO)				\
 	fputs ("\tjsr $28,_mcount\n", (FILE))
 
 /* Show that we need a GP when profiling.  */
-#undef TARGET_PROFILING_NEEDS_GP
+#undef  TARGET_PROFILING_NEEDS_GP
 #define TARGET_PROFILING_NEEDS_GP 1
 
-#undef HAS_INIT_SECTION
-
-/* Provide an ASM_SPEC appropriate for a FreeBSD/alpha target.  This differs
-   from the generic FreeBSD ASM_SPEC in that no special handling of PIC is
-   necessary on the Alpha. */
-
-#undef ASM_SPEC
-#define ASM_SPEC " %| %{mcpu=*:-m%*}"
-
-/* Output at beginning of assembler file.  */
-
-#undef ASM_FILE_START
-#define ASM_FILE_START(FILE)					\
-{								\
-  alpha_write_verstamp (FILE);					\
-  output_file_directive (FILE, main_input_filename);		\
-  fprintf (FILE, "\t.version\t\"01.01\"\n");			\
-  fprintf (FILE, "\t.set noat\n");				\
-}
-
-#undef ASM_OUTPUT_SOURCE_LINE
-#define ASM_OUTPUT_SOURCE_LINE(STREAM, LINE)				\
-  alpha_output_lineno (STREAM, LINE)
-
-/* Attach a special .ident directive to the end of the file to identify
-   the version of GCC which compiled this code.  The format of the
-   .ident string is patterned after the ones produced by native svr4
-   C compilers.  */
-
-#undef IDENT_ASM_OP
-#define IDENT_ASM_OP ".ident"
-
-#ifdef IDENTIFY_WITH_IDENT
-#undef ASM_IDENTIFY_GCC
-#define ASM_IDENTIFY_GCC(FILE) /* nothing */
-#undef ASM_IDENTIFY_LANGUAGE
-#define ASM_IDENTIFY_LANGUAGE(FILE)			\
- fprintf(FILE, "\t%s \"GCC (%s) %s\"\n", IDENT_ASM_OP,	\
-	 lang_identify(), version_string)
-#else
-#undef ASM_FILE_END
-#define ASM_FILE_END(FILE)					\
-do {				 				\
-     fprintf ((FILE), "\t%s\t\"GCC: (GNU) %s\"\n",		\
-	      IDENT_ASM_OP, version_string);			\
-   } while (0)
-#endif
-
-/* Allow #sccs in preprocessor.  */
-
-#define SCCS_DIRECTIVE
-
-/* Output #ident as a .ident.  */
-
-#undef ASM_OUTPUT_IDENT
-#define ASM_OUTPUT_IDENT(FILE, NAME) \
-  fprintf (FILE, "\t%s\t\"%s\"\n", IDENT_ASM_OP, NAME);
-
-/* This is how to allocate empty space in some section.  The .zero
-   pseudo-op is used for this on most svr4 assemblers.  */
-
-#undef SKIP_ASM_OP
-#define SKIP_ASM_OP	".zero"
-
-#undef ASM_OUTPUT_SKIP
-#define ASM_OUTPUT_SKIP(FILE,SIZE) \
-  fprintf (FILE, "\t%s\t%u\n", SKIP_ASM_OP, (SIZE))
-
-/* Output the label which precedes a jumptable.  Note that for all svr4
-   systems where we actually generate jumptables (which is to say every
-   svr4 target except i386, where we use casesi instead) we put the jump-
-   tables into the .rodata section and since other stuff could have been
-   put into the .rodata section prior to any given jumptable, we have to
-   make sure that the location counter for the .rodata section gets pro-
-   perly re-aligned prior to the actual beginning of the jump table.  */
-
-#undef ALIGN_ASM_OP
-#define ALIGN_ASM_OP ".align"
-
-#ifndef ASM_OUTPUT_BEFORE_CASE_LABEL
-#define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE) \
-  ASM_OUTPUT_ALIGN ((FILE), 2);
-#endif
-
-#undef ASM_OUTPUT_CASE_LABEL
-#define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,JUMPTABLE)		\
-  do {									\
-    ASM_OUTPUT_BEFORE_CASE_LABEL (FILE, PREFIX, NUM, JUMPTABLE)		\
-    ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM);			\
-  } while (0)
-
-/* The standard SVR4 assembler seems to require that certain builtin
-   library routines (e.g. .udiv) be explicitly declared as .globl
-   in each assembly file where they are referenced.  */
-
-#undef ASM_OUTPUT_EXTERNAL_LIBCALL
-#define ASM_OUTPUT_EXTERNAL_LIBCALL(FILE, FUN)				\
-  ASM_GLOBALIZE_LABEL (FILE, XSTR (FUN, 0))
-
-/* This says how to output assembler code to declare an
-   uninitialized external linkage data object.  Under SVR4,
-   the linker seems to want the alignment of data objects
-   to depend on their types.  We do exactly that here.  */
-
-#undef COMMON_ASM_OP
-#define COMMON_ASM_OP	".comm"
-
-#undef ASM_OUTPUT_ALIGNED_COMMON
-#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN)		\
-do {									\
-  fprintf ((FILE), "\t%s\t", COMMON_ASM_OP);				\
-  assemble_name ((FILE), (NAME));					\
-  fprintf ((FILE), ",%u,%u\n", (SIZE), (ALIGN) / BITS_PER_UNIT);	\
-} while (0)
-
-/* This says how to output assembler code to declare an
-   uninitialized internal linkage data object.  Under SVR4,
-   the linker seems to want the alignment of data objects
-   to depend on their types.  We do exactly that here.  */
-
-#undef LOCAL_ASM_OP
-#define LOCAL_ASM_OP	".local"
-
-#undef ASM_OUTPUT_ALIGNED_LOCAL
-#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN)		\
-do {									\
-  fprintf ((FILE), "\t%s\t", LOCAL_ASM_OP);				\
-  assemble_name ((FILE), (NAME));					\
-  fprintf ((FILE), "\n");						\
-  ASM_OUTPUT_ALIGNED_COMMON (FILE, NAME, SIZE, ALIGN);			\
-} while (0)
-
-/* This is the pseudo-op used to generate a 64-bit word of data with a
-   specific value in some section.  */
-
-#undef INT_ASM_OP
-#define INT_ASM_OP		".quad"
-
-/* This is the pseudo-op used to generate a contiguous sequence of byte
-   values from a double-quoted string WITHOUT HAVING A TERMINATING NUL
-   AUTOMATICALLY APPENDED.  This is the same for most svr4 assemblers.  */
-
-#undef ASCII_DATA_ASM_OP
-#define ASCII_DATA_ASM_OP	".ascii"
-
-/* Support const sections and the ctors and dtors sections for g++.
-   Note that there appears to be two different ways to support const
-   sections at the moment.  You can either #define the symbol
-   READONLY_DATA_SECTION (giving it some code which switches to the
-   readonly data section) or else you can #define the symbols
-   EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and
-   SELECT_RTX_SECTION.  We do both here just to be on the safe side.  */
-
-#undef USE_CONST_SECTION
-#define USE_CONST_SECTION	1
-
-#undef CONST_SECTION_ASM_OP
-#define CONST_SECTION_ASM_OP	".section\t.rodata"
-
-/* Define the pseudo-ops used to switch to the .ctors and .dtors sections.
-
-   Note that we want to give these sections the SHF_WRITE attribute
-   because these sections will actually contain data (i.e. tables of
-   addresses of functions in the current root executable or shared library
-   file) and, in the case of a shared library, the relocatable addresses
-   will have to be properly resolved/relocated (and then written into) by
-   the dynamic linker when it actually attaches the given shared library
-   to the executing process.  (Note that on SVR4, you may wish to use the
-   `-z text' option to the ELF linker, when building a shared library, as
-   an additional check that you are doing everything right.  But if you do
-   use the `-z text' option when building a shared library, you will get
-   errors unless the .ctors and .dtors sections are marked as writable
-   via the SHF_WRITE attribute.)  */
-
-#undef CTORS_SECTION_ASM_OP
-#define CTORS_SECTION_ASM_OP	".section\t.ctors,\"aw\""
-#undef DTORS_SECTION_ASM_OP
-#define DTORS_SECTION_ASM_OP	".section\t.dtors,\"aw\""
-
-/* On svr4, we *do* have support for the .init and .fini sections, and we
-   can put stuff in there to be executed before and after `main'.  We let
-   crtstuff.c and other files know this by defining the following symbols.
-   The definitions say how to change sections to the .init and .fini
-   sections.  This is the same for all known svr4 assemblers.  */
-
-#undef INIT_SECTION_ASM_OP
-#define INIT_SECTION_ASM_OP	".section\t.init"
-#undef FINI_SECTION_ASM_OP
-#define FINI_SECTION_ASM_OP	".section\t.fini"
-
-/* A default list of other sections which we might be "in" at any given
-   time.  For targets that use additional sections (e.g. .tdesc) you
-   should override this definition in the target-specific file which
-   includes this file.  */
-
-#undef EXTRA_SECTIONS
-#define EXTRA_SECTIONS in_const, in_ctors, in_dtors
-
-/* A default list of extra section function definitions.  For targets
-   that use additional sections (e.g. .tdesc) you should override this
-   definition in the target-specific file which includes this file.  */
-
-#undef EXTRA_SECTION_FUNCTIONS
-#define EXTRA_SECTION_FUNCTIONS						\
-  CONST_SECTION_FUNCTION						\
-  CTORS_SECTION_FUNCTION						\
-  DTORS_SECTION_FUNCTION
-
-#undef READONLY_DATA_SECTION
-#define READONLY_DATA_SECTION() const_section ()
-
-#undef CONST_SECTION_FUNCTION
-#define CONST_SECTION_FUNCTION						\
-void									\
-const_section ()							\
-{									\
-  if (!USE_CONST_SECTION)						\
-    text_section();							\
-  else if (in_section != in_const)					\
-    {									\
-      fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP);		\
-      in_section = in_const;						\
-    }									\
-}
-
-#undef CTORS_SECTION_FUNCTION
-#define CTORS_SECTION_FUNCTION						\
-void									\
-ctors_section ()							\
-{									\
-  if (in_section != in_ctors)						\
-    {									\
-      fprintf (asm_out_file, "%s\n", CTORS_SECTION_ASM_OP);		\
-      in_section = in_ctors;						\
-    }									\
-}
-
-#undef DTORS_SECTION_FUNCTION
-#define DTORS_SECTION_FUNCTION						\
-void									\
-dtors_section ()							\
-{									\
-  if (in_section != in_dtors)						\
-    {									\
-      fprintf (asm_out_file, "%s\n", DTORS_SECTION_ASM_OP);		\
-      in_section = in_dtors;						\
-    }									\
-}
-
-/* Switch into a generic section.
-   This is currently only used to support section attributes.
-
-   We make the section read-only and executable for a function decl,
-   read-only for a const data decl, and writable for a non-const data decl.  */
-#undef ASM_OUTPUT_SECTION_NAME
-#define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME, RELOC) \
-  fprintf (FILE, ".section\t%s,\"%s\",@progbits\n", NAME, \
-	   (DECL) && TREE_CODE (DECL) == FUNCTION_DECL ? "ax" : \
-	   (DECL) && DECL_READONLY_SECTION (DECL, RELOC) ? "a" : "aw")
-
-
-/* A C statement (sans semicolon) to output an element in the table of
-   global constructors.  */
-#undef ASM_OUTPUT_CONSTRUCTOR
-#define ASM_OUTPUT_CONSTRUCTOR(FILE,NAME)				\
-  do {									\
-    ctors_section ();							\
-    fprintf (FILE, "\t%s\t ", INT_ASM_OP);				\
-    assemble_name (FILE, NAME);						\
-    fprintf (FILE, "\n");						\
-  } while (0)
-
-/* A C statement (sans semicolon) to output an element in the table of
-   global destructors.  */
-#undef ASM_OUTPUT_DESTRUCTOR
-#define ASM_OUTPUT_DESTRUCTOR(FILE,NAME)       				\
-  do {									\
-    dtors_section ();                   				\
-    fprintf (FILE, "\t%s\t ", INT_ASM_OP);				\
-    assemble_name (FILE, NAME);              				\
-    fprintf (FILE, "\n");						\
-  } while (0)
-
-/* A C statement or statements to switch to the appropriate
-   section for output of DECL.  DECL is either a `VAR_DECL' node
-   or a constant of some sort.  RELOC indicates whether forming
-   the initial value of DECL requires link-time relocations.  */
-
-#undef SELECT_SECTION
-#define SELECT_SECTION(DECL,RELOC)					\
-{									\
-  if (TREE_CODE (DECL) == STRING_CST)					\
-    {									\
-      if (! flag_writable_strings)					\
-	const_section ();						\
-      else								\
-	data_section ();						\
-    }									\
-  else if (TREE_CODE (DECL) == VAR_DECL)				\
-    {									\
-      if ((flag_pic && RELOC)						\
-	  || !TREE_READONLY (DECL) || TREE_SIDE_EFFECTS (DECL)		\
-	  || !DECL_INITIAL (DECL)					\
-	  || (DECL_INITIAL (DECL) != error_mark_node			\
-	      && !TREE_CONSTANT (DECL_INITIAL (DECL))))			\
-	data_section ();						\
-      else								\
-	const_section ();						\
-    }									\
-  else									\
-    const_section ();							\
-}
-
-/* A C statement or statements to switch to the appropriate
-   section for output of RTX in mode MODE.  RTX is some kind
-   of constant in RTL.  The argument MODE is redundant except
-   in the case of a `const_int' rtx.  Currently, these always
-   go into the const section.  */
-
-#undef SELECT_RTX_SECTION
-#define SELECT_RTX_SECTION(MODE,RTX) const_section()
-
-/* Define the strings used for the .type, .size and .set directives.
-   These strings generally do not vary from one system running svr4 to
-   another, but if a given system (e.g. m88k running svr) needs to use
-   different pseudo-op names for these, they may be overridden in the
-   file which includes this one.  */
-
-#undef TYPE_ASM_OP
-#define TYPE_ASM_OP	".type"
-#undef SIZE_ASM_OP
-#define SIZE_ASM_OP	".size"
-
-/* This is how we tell the assembler that two symbols have the same value.  */
-
-#undef ASM_OUTPUT_DEF
-#define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \
-  do { assemble_name(FILE, NAME1); 	 \
-       fputs(" = ", FILE);		 \
-       assemble_name(FILE, NAME2);	 \
-       fputc('\n', FILE); } while (0)
-
-/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
-   ASM_OUTPUT_LIMITED_STRING macros.  Each byte in the table
-   corresponds to a particular byte value [0..255].  For any
-   given byte value, if the value in the corresponding table
-   position is zero, the given character can be output directly.
-   If the table value is 1, the byte must be output as a \ooo
-   octal escape.  If the tables value is anything else, then the
-   byte value should be output as a \ followed by the value
-   in the table.  Note that we can use standard UN*X escape
-   sequences for many control characters, but we don't use
-   \a to represent BEL because some svr4 assemblers (e.g. on
-   the i386) don't know about that.  Also, we don't use \v
-   since some versions of gas, such as 2.2 did not accept it.  */
-
-#undef ESCAPES
-#define ESCAPES \
-"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
-\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
-\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\
-\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\
-\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
-\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
-\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
-\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1"
-
-/* Some svr4 assemblers have a limit on the number of characters which
-   can appear in the operand of a .string directive.  If your assembler
-   has such a limitation, you should define STRING_LIMIT to reflect that
-   limit.  Note that at least some svr4 assemblers have a limit on the
-   actual number of bytes in the double-quoted string, and that they
-   count each character in an escape sequence as one byte.  Thus, an
-   escape sequence like \377 would count as four bytes.
-
-   If your target assembler doesn't support the .string directive, you
-   should define this to zero.
-*/
-
-#undef STRING_LIMIT
-#define STRING_LIMIT	((unsigned) 256)
-
-#undef STRING_ASM_OP
-#define STRING_ASM_OP	".string"
-
-/*
- * We always use gas here, so we don't worry about ECOFF assembler problems.
- */
-#undef TARGET_GAS
-#define TARGET_GAS	1
-
-#undef PREFERRED_DEBUGGING_TYPE
-#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-
-#undef LINK_SPEC
-#define LINK_SPEC "-m elf64alpha 				\
-  %{p:%e`-p' not supported; use `-pg' and gprof(1)}		\
-  %{Wl,*:%*}							\
-  %{assert*} %{R*} %{rpath*} %{defsym*}				\
-  %{shared:-Bshareable %{h*} %{soname*}}			\
-  %{symbolic:-Bsymbolic}					\
-  %{!shared:							\
-    %{!static:							\
-      %{rdynamic:-export-dynamic}				\
-      %{!dynamic-linker:-dynamic-linker /usr/libexec/ld-elf.so.1}} \
-    %{static:-Bstatic}}"
-
-#undef	STARTFILE_SPEC
-#define STARTFILE_SPEC \
-  "%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}} \
-     %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
-
-/* Provide a ENDFILE_SPEC appropriate for ELF.  Here we tack on the
-   magical crtend.o file which provides part of the support for
-   getting C++ file-scope static object constructed before entering
-   `main', followed by a normal ELF "finalizer" file, `crtn.o'.  */
-
-#undef	ENDFILE_SPEC
-#define ENDFILE_SPEC \
-  "%{!shared:crtend.o%s} %{shared:crtendS.o%s}"
-
-/* Handle #pragma weak and #pragma pack.  */
-
-#define HANDLE_SYSV_PRAGMA
-
-/*
- * Some imports from svr4.h in support of shared libraries.
- * Currently, we need the DECLARE_OBJECT_SIZE stuff.
- */
-
-/* This is how we tell the assembler that a symbol is weak.  */
-
-#undef ASM_WEAKEN_LABEL
-#define ASM_WEAKEN_LABEL(FILE,NAME) \
-  do { fputs ("\t.globl\t", FILE); assemble_name (FILE, NAME); \
-       fputc ('\n', FILE); \
-       fputs ("\t.weak\t", FILE); assemble_name (FILE, NAME); \
-       fputc ('\n', FILE); } while (0)
-
-/* The following macro defines the format used to output the second
-   operand of the .type assembler directive.  Different svr4 assemblers
-   expect various different forms for this operand.  The one given here
-   is just a default.  You may need to override it in your machine-
-   specific tm.h file (depending upon the particulars of your assembler).  */
-
-#undef TYPE_OPERAND_FMT
-#define TYPE_OPERAND_FMT	"@%s"
-
-/* Write the extra assembler code needed to declare a function's result.
-   Most svr4 assemblers don't require any special declaration of the
-   result value, but there are exceptions.  */
+/* This is the char to use for continuation (in case we need to turn
+   continuation back on).  */
 
-#ifndef ASM_DECLARE_RESULT
-#define ASM_DECLARE_RESULT(FILE, RESULT)
-#endif
+#undef  DBX_CONTIN_CHAR
+#define DBX_CONTIN_CHAR	'?'
diff --git a/lang/gcc34/files/patch-ad b/lang/gcc34/files/patch-ad
index 934da77780a4..53927df88598 100644
--- a/lang/gcc34/files/patch-ad
+++ b/lang/gcc34/files/patch-ad
@@ -1,5 +1,5 @@
---- gcc/config/i386/freebsd-aout.h.orig	Sun Jan 30 23:28:05 2000
-+++ gcc/config/i386/freebsd-aout.h	Fri Feb  4 05:19:16 2000
+--- gcc/config/i386/freebsd-aout.h.orig	Mon Sep 25 06:03:18 2000
++++ gcc/config/i386/freebsd-aout.h	Tue Sep 26 12:23:26 2000
 @@ -31,12 +31,7 @@
  
  /* This goes away when the math-emulator is fixed */
@@ -54,9 +54,9 @@
  }
 @@ -132,6 +118,7 @@
  
- #define TYPE_ASM_OP	".type"
- #define SIZE_ASM_OP	".size"
-+#define SET_ASM_OP	".set"
+ #define TYPE_ASM_OP	"\t.type\t"
+ #define SIZE_ASM_OP	"\t.size\t"
++#define SET_ASM_OP	"\t.set\t"
  
  /* The following macro defines the format used to output the second
     operand of the .type assembler directive.  Different svr4 assemblers
diff --git a/lang/gcc34/files/patch-ak b/lang/gcc34/files/patch-ak
index f783ebef16ab..98c373d4e980 100644
--- a/lang/gcc34/files/patch-ak
+++ b/lang/gcc34/files/patch-ak
@@ -1,18 +1,19 @@
---- gcc/configure.orig	Mon Jun 19 10:23:54 2000
-+++ gcc/configure	Mon Jun 26 15:36:08 2000
-@@ -3687,6 +3687,22 @@
+--- gcc/configure.orig	Sun Oct  1 23:50:51 2000
++++ gcc/configure	Mon Oct  9 18:55:44 2000
+@@ -3910,6 +3910,23 @@
   			thread_file='posix'
   		fi
  		;;
 +	alpha*-*-freebsd*)
-+		tm_file="${tm_file} freebsd.h alpha/freebsd.h"
++		tm_file="${tm_file} freebsd.h alpha/elf.h alpha/freebsd.h"
 +		xm_file="${xm_file} xm-freebsd.h"
 +		target_cpu_default="MASK_GAS"
-+		tmake_file="t-freebsd alpha/t-crtbe"
++		tmake_file="t-freebsd alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
++		extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 +		xmake_file=none
 +		fixincludes=fixinc.wrap
-+		gas=yes
-+		gnu_ld=yes
++		gas=yes gnu_ld=yes
++		stabs=yes
 +		case x${enable_threads} in
 +		xyes | xpthreads | xposix)
 +			thread_file='posix'
@@ -23,17 +24,3 @@
  	alpha*-*-netbsd*)
  		tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
  		target_cpu_default="MASK_GAS"
-@@ -4346,11 +4362,11 @@
- #		use_collect2=yes
- 		;;
- 	i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
--		tm_file="i386/freebsd.h i386/perform.h"
-+		tm_file="i386/freebsd-aout.h i386/perform.h"
- 		tmake_file=t-freebsd
- 		;;
- 	i[34567]86-*-freebsd*)
--		tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd-elf.h i386/perform.h"
-+		tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd.h i386/perform.h"
- 		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- 		tmake_file=t-freebsd
- 		gas=yes
diff --git a/lang/gcc34/files/patch-al b/lang/gcc34/files/patch-al
index 4484e2e070a9..e2760943566e 100644
--- a/lang/gcc34/files/patch-al
+++ b/lang/gcc34/files/patch-al
@@ -1,18 +1,19 @@
---- gcc/configure.in.orig	Mon Jun 19 10:23:54 2000
-+++ gcc/configure.in	Mon Jun 26 15:37:26 2000
-@@ -742,6 +742,22 @@
+--- gcc/configure.in.orig	Sun Oct  1 23:50:51 2000
++++ gcc/configure.in	Mon Oct  9 18:56:34 2000
+@@ -786,6 +786,23 @@
+  		if test x$enable_threads = xyes; then
   			thread_file='posix'
   		fi
- 		;;
 +	alpha*-*-freebsd*)
-+		tm_file="${tm_file} freebsd.h alpha/freebsd.h"
++		tm_file="${tm_file} freebsd.h alpha/elf.h alpha/freebsd.h"
 +		xm_file="${xm_file} xm-freebsd.h"
 +		target_cpu_default="MASK_GAS"
-+		tmake_file="t-freebsd alpha/t-crtbe"
++		tmake_file="t-freebsd alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
++		extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 +		xmake_file=none
 +		fixincludes=fixinc.wrap
-+		gas=yes
-+		gnu_ld=yes
++		gas=yes gnu_ld=yes
++		stabs=yes
 +		case x${enable_threads} in
 +		xyes | xpthreads | xposix)
 +			thread_file='posix'
@@ -20,22 +21,6 @@
 +			;;
 +		esac
 +		;;
+ 		;;
  	alpha*-*-netbsd*)
  		tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
- 		target_cpu_default="MASK_GAS"
-@@ -1441,13 +1457,13 @@
- changequote(,)dnl
- 	i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
- changequote([,])dnl
--		tm_file="i386/freebsd.h i386/perform.h"
-+		tm_file="i386/freebsd-aout.h i386/perform.h"
- 		tmake_file=t-freebsd
- 		;;
- changequote(,)dnl
- 	i[34567]86-*-freebsd*)
- changequote([,])dnl
--		tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd-elf.h i386/perform.h"
-+		tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd.h i386/perform.h"
- 		extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- 		tmake_file=t-freebsd
- 		gas=yes
diff --git a/lang/gcc34/files/patch-fa b/lang/gcc34/files/patch-fa
index 55221295f0b7..d6b90e4ba86c 100644
--- a/lang/gcc34/files/patch-fa
+++ b/lang/gcc34/files/patch-fa
@@ -1,6 +1,6 @@
---- gcc/c-common.c.orig	Fri Aug 25 08:27:55 2000
-+++ gcc/c-common.c	Fri Sep 15 11:30:42 2000
-@@ -157,7 +157,7 @@
+--- gcc/c-common.c.orig	Mon Sep 25 10:04:45 2000
++++ gcc/c-common.c	Mon Oct  9 02:51:14 2000
+@@ -171,7 +171,7 @@
  						 int, int, int));
  static void init_attributes		PARAMS ((void));
  static void record_function_format	PARAMS ((tree, tree, enum format_type,
@@ -9,7 +9,7 @@
  static void record_international_format	PARAMS ((tree, tree, int));
  static int default_valid_lang_attribute PARAMS ((tree, tree, tree, tree));
  
-@@ -827,6 +827,7 @@
+@@ -862,6 +862,7 @@
  	    enum format_type format_type;
  	    tree argument;
  	    unsigned int arg_num;
@@ -17,7 +17,7 @@
  
  	    if (TREE_CODE (decl) != FUNCTION_DECL)
  	      {
-@@ -837,7 +838,7 @@
+@@ -872,7 +873,7 @@
  
  	    if (TREE_CODE (format_type_id) != IDENTIFIER_NODE)
  	      {
@@ -26,7 +26,7 @@
  		continue;
  	      }
  	    else
-@@ -845,12 +846,26 @@
+@@ -880,12 +881,26 @@
  		const char *p = IDENTIFIER_POINTER (format_type_id);
  
  		if (!strcmp (p, "printf") || !strcmp (p, "__printf__"))
@@ -52,8 +52,8 @@
 +		  }
  		else
  		  {
- 		    warning ("`%s' is an unrecognized format function type", p);
-@@ -923,7 +938,8 @@
+ 		    status_warning (status, "`%s' is an unrecognized format function type", p);
+@@ -958,7 +973,8 @@
  
  	    record_function_format (DECL_NAME (decl),
  				    DECL_ASSEMBLER_NAME (decl),
@@ -63,19 +63,21 @@
  	    break;
  	  }
  
-@@ -1242,6 +1258,11 @@
- } format_char_info;
+@@ -1441,6 +1457,13 @@
  
- static format_char_info print_char_table[] = {
+ static const format_char_info print_char_table[] =
+ {
++#ifdef XXX_NEED_TO_UPDATE_THIS_FOR_GCC297_CHANGES
 +/* FreeBSD kernel extensions.  */
 +  { "D",	1,	T_C,	T_C,	NULL,	NULL,	NULL,	NULL,	NULL,	"-wp"		},
 +  { "b",	1,	T_C,	T_C,	NULL,	NULL,	NULL,	NULL,	NULL,	"-wp"		},
 +  { "rz",	0,	NULL,	T_I,	T_I,	T_L,	NULL,	NULL,	NULL,	"-wp0 +#"	},
 +#define unextended_print_char_table	(print_char_table + 3)
-   { "di",	0,	T_I,	T_I,	T_I,	T_L,	T_LL,	T_LL,	T_SST,	T_PD,	T_IM,	"-wp0 +'I"	},
-   { "oxX",	0,	T_UI,	T_UI,	T_UI,	T_UL,	T_ULL,	T_ULL,	T_ST,	T_UPD,	T_UIM,	"-wp0#"		},
-   { "u",	0,	T_UI,	T_UI,	T_UI,	T_UL,	T_ULL,	T_ULL,	T_ST,	T_UPD,	T_UIM,	"-wp0'I"		},
-@@ -1314,6 +1335,7 @@
++#endif
+   /* C89 conversion specifiers.  */
+   { "di",  0, STD_C89, { T89_I,   T99_I,   T89_I,   T89_L,   T99_LL,  TEX_LL,  T99_SST, T99_PD,  T99_IM  }, "-wp0 +'I", "i" },
+   { "oxX", 0, STD_C89, { T89_UI,  T99_UI,  T89_UI,  T89_UL,  T99_ULL, TEX_ULL, T99_ST,  T99_UPD, T99_UIM }, "-wp0#",    "i" },
+@@ -1526,6 +1549,7 @@
    enum format_type format_type;	/* type of format (printf, scanf, etc.) */
    int format_num;		/* number of format argument */
    int first_arg_num;		/* number of first arg (zero for varargs) */
@@ -83,12 +85,15 @@
  } function_format_info;
  
  static function_format_info *function_format_list = NULL;
-@@ -1354,40 +1376,40 @@
+@@ -1570,42 +1594,42 @@
      {
        /* Functions from ISO/IEC 9899:1990.  */
        record_function_format (get_identifier ("printf"), NULL_TREE,
 -			      printf_format_type, 1, 2);
 +			      printf_format_type, 1, 2, 0);
+       record_function_format (get_identifier ("__builtin_printf"), NULL_TREE,
+-			      printf_format_type, 1, 2);
++			      printf_format_type, 1, 2, 0);
        record_function_format (get_identifier ("fprintf"), NULL_TREE,
 -			      printf_format_type, 2, 3);
 +			      printf_format_type, 2, 3, 0);
@@ -139,7 +144,7 @@
      }
  
    if (flag_hosted && flag_noniso_default_format_attributes)
-@@ -1410,12 +1432,13 @@
+@@ -1630,12 +1654,13 @@
  
  static void
  record_function_format (name, assembler_name, format_type,
@@ -154,7 +159,7 @@
  {
    function_format_info *info;
  
-@@ -1439,6 +1462,7 @@
+@@ -1659,6 +1684,7 @@
    info->format_type = format_type;
    info->format_num = format_num;
    info->first_arg_num = first_arg_num;
@@ -162,32 +167,16 @@
  }
  
  /* Record information for the names of function that modify the format
-@@ -1755,7 +1779,8 @@
+@@ -2019,7 +2045,7 @@
  
    if (integer_zerop (format_tree))
      {
--      warning ("null format string");
-+      if (!info->null_format_ok)
-+	warning ("null format string");
+-      status_warning (status, "null format string");
++      if (!info->null_format_ok) status_warning (status, "null format string");
        return;
      }
    if (TREE_CODE (format_tree) != ADDR_EXPR)
-@@ -1981,12 +2006,13 @@
- 		     It will work on most machines, because size_t and int
- 		     have the same mode.  But might as well warn anyway,
- 		     since it will fail on other machines.  */
-+		  /* XXX should we allow unsigned ints here?  */
- 		  if ((TYPE_MAIN_VARIANT (TREE_TYPE (cur_param))
- 		       != integer_type_node)
- 		      &&
- 		      (TYPE_MAIN_VARIANT (TREE_TYPE (cur_param))
- 		       != unsigned_type_node))
--		    warning ("field width is not type int (arg %d)", arg_num);
-+		    warning ("precision is not type int (arg %d)", arg_num);
- 		}
- 	    }
- 	  else
-@@ -2046,6 +2072,53 @@
+@@ -2340,6 +2366,54 @@
  		}
  	    }
  	}
@@ -196,7 +185,7 @@
 +	  /* There should be an int arg to control the string arg.  */
 +	  if (params == 0)
 +	    {
-+	      tfaff ();
++	      status_warning (status, "too few arguments for format");
 +	      return;
 +	    }
 +	    if (info->first_arg_num != 0)
@@ -210,7 +199,7 @@
 +		  (TYPE_MAIN_VARIANT (TREE_TYPE (cur_param))
 +		   != unsigned_type_node))
 +		{
-+		  warning ("bitmap is not type int (arg %d)", arg_num);
++		  status_warning (status, "bitmap is not type int (arg %d)", arg_num);
 +		}
 +	    }
 +	}
@@ -219,11 +208,12 @@
 +	  /* There should be an unsigned char * arg before the string arg.  */
 +	  if (params == 0)
 +	    {
-+	      tfaff ();
++	      status_warning (status, "too few arguments for format");
 +	      return;
 +	    }
 +	    if (info->first_arg_num != 0)
 +	    {
++	      tree cur_type;
 +	      cur_param = TREE_VALUE (params);
 +	      params = TREE_CHAIN (params);
 +	      ++arg_num;
@@ -232,8 +222,8 @@
 +		  || TYPE_MAIN_VARIANT (TREE_TYPE (cur_type))
 +		     != unsigned_char_type_node)
 +		{
-+		  warning ("ethernet address is not type unsigned char *"
-+			   " (arg %d)",
++		  status_warning (status,
++			  "ethernet address is not type unsigned char * (arg %d)",
 +			   arg_num);
 +		}
 +	    }
@@ -241,22 +231,12 @@
  
        aflag = 0;
  
-@@ -2130,7 +2203,8 @@
-       switch (info->format_type)
- 	{
- 	case printf_format_type:
--	  fci = print_char_table;
-+	  fci = flag_format_extensions ? print_char_table
-+	  	: unextended_print_char_table;
- 	  break;
- 	case scanf_format_type:
- 	  fci = scan_char_table;
-@@ -2174,7 +2248,7 @@
- 	warning ("width used with `%c' format", format_char);
-       if (index (fci->flag_chars, '3') != 0
+@@ -2441,7 +2515,7 @@
+ 	status_warning (status, "width used with `%c' format", format_char);
+       if (index (fci->flags2, '3') != 0
  	  || (format_char == 'y' && index (flag_chars, 'E')))
--	warning ("`%%%c' yields only last 2 digits of year in some locales",
-+ 	warning ("`%%%c' yields only last 2 digits of year in some locales on non-BSD systems",
+-	status_warning (status, "`%%%c' yields only last 2 digits of year in some locales",
++	status_warning (status, "`%%%c' yields only last 2 digits of year in some locales on non-BSD systems",
  		 format_char);
-       else if (index (fci->flag_chars, '2') != 0)
- 	warning ("`%%%c' yields only last 2 digits of year", format_char);
+       else if (index (fci->flags2, '2') != 0)
+ 	status_warning (status, "`%%%c' yields only last 2 digits of year", format_char);