2 files changed, 114 insertions, 12 deletions

diff --git a/net/ntp-rc/Makefile b/net/ntp-rc/Makefile
index fff03b6cb3d7..7603c23ff424 100644
--- a/net/ntp-rc/Makefile
+++ b/net/ntp-rc/Makefile
@@ -29,14 +29,16 @@ MAN1=		sntp.1 \
 		ntpsnmpd.1 \
 		ntp-keygen.1 \
 
-OPTIONS=	NTPSNMPD "Build and install ntpsnmpd" OFF \
-		RAWDCF "Enable RAWDCF option" OFF \
-		SSL "Enable SSL" ON
+.include "Makefile.inc"
 
 .include <bsd.port.options.mk>
 
-.if defined(WITH_RAWDCF)
-CONFIGURE_ARGS+=	--enable-RAWDCF
+.if defined(WITH_NTPSNMPD)
+PLIST_FILES+=		bin/ntpsnmpd
+BUILD_DEPENDS+=		${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp
+RUN_DEPENDS+=		${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp
+.else
+CONFIGURE_ARGS+=	--without-ntpsnmpd
 .endif
 
 .if !defined(WITH_SSL)
@@ -48,15 +50,12 @@ CONFIGURE_ARGS+=	--with-openssl-incdir=${OPENSSLINC} \
 			--with-openssl-libdir=${OPENSSLLIB}
 PLIST_SUB+=		SSL=""
 .endif
-CONFIGURE_ARGS+=	--enable-ipv6
 
-.if defined(WITH_NTPSNMPD)
-PLIST_FILES+=		bin/ntpsnmpd
-BUILD_DEPENDS+=		${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp
-RUN_DEPENDS+=		${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp
-.else
-CONFIGURE_ARGS+=	--without-ntpsnmpd
+.for D in ${NTP_DRIVERS}
+.if defined(WITH_${D})
+CONFIGURE_ARGS+=	--enable-${D}
 .endif
+.endfor
 
 pre-configure:
 	@cd ${WRKSRC} && ./bootstrap
diff --git a/net/ntp-rc/Makefile.inc b/net/ntp-rc/Makefile.inc
new file mode 100644
index 000000000000..f1bfdb7c01a1
--- /dev/null
+++ b/net/ntp-rc/Makefile.inc
@@ -0,0 +1,103 @@
+# $FreeBSD: /tmp/pcvs/ports/net/ntp-rc/Makefile.inc,v 1.1 2011-11-27 19:55:46 cy Exp $
+
+OPTIONS=	NTPSNMPD	"Build and install ntpsnmpd" OFF \
+		SSL		"Enable SSL" ON \
+  		BANCOMM		"Enable Datum/Bancomm bc635/VME interface" OFF \
+  		GPSVME		"Enable TrueTime GPS receiver/VME interface" OFF \
+  		ACTS		"Enable ACTS modem service" OFF \
+  		ARBITER		"Enable Arbiter 1088A/B GPS receiver" OFF \
+  		ARCRON_MSF	"Enable Arcron MSF receiver" OFF \
+  		AS2201		"Enable Austron 2200A/2201A GPS receiver" OFF \
+  		ATOM		"Enable ATOM PPS interface" OFF \
+  		CHRONOLOG	"Enable Chrono-log K-series WWVB receiver" OFF \
+  		CHU		"Enable CHU modem/decoder" OFF \
+  		AUDIO_CHU	"Enable CHU audio/decoder" OFF \
+  		DATUM		"Enable Datum Programmable Time System" OFF \
+  		DUMBCLOCK	"Enable Dumb generic hh:mm:ss local clock" OFF \
+  		FG		"Enable Forum Graphic GPS" OFF \
+  		HEATH		"Enable Heath GC-1000 WWV/WWVH receiver" OFF \
+  		HOPFSERIAL	"Enable hopf serial clock device" OFF \
+  		HOPFPCI		"Enable hopf 6039 PCI board" OFF \
+  		HPGPS		"Enable HP 58503A GPS receiver" OFF \
+  		IRIG		"Enable IRIG audio decoder" OFF \
+  		JJY		"Enable JJY receiver" OFF \
+  		JUPITER		"Enable Rockwell Jupiter GPS receiver" OFF \
+  		LEITCH		"Enable Leitch CSD 5300 Master Clock" OFF \
+  		LOCAL_CLOCK	"Enable local clock reference" OFF \
+  		MX4200		"Enable Magnavox MX4200 GPS receiver" OFF \
+  		NEOCLOCK4X	"Enable NeoClock4X DCF77 / TDF receiver" OFF \
+  		NMEA		"Enable NMEA GPS receiver" OFF \
+  		ONCORE		"Enable Motorola VP/UT Oncore GPS receiver" OFF \
+  		PALISADE	"Enable Palisade clock" OFF \
+  		PCF		"Enable Conrad parallel port radio clock" OFF \
+  		PST		"Enable PST/Traconex 1020 WWV/WWVH receiver" OFF \
+  		RIPENCC		"Enable RIPENCC specific Trimble driver" OFF \
+  		SHM		"Enable SHM clock attached thru shared memory" OFF \
+  		SPECTRACOM	"Enable Spectracom 8170/Netclock/2 WWVB" OFF \
+  		TRUETIME	"Enable Kinemetrics/TrueTime receivers" OFF \
+  		ULINK		"Enable Ultralink WWVB receiver" OFF \
+  		WWV		"Enable WWV Audio receiver" OFF \
+  		ZYFER		"Enable Zyfer GPStarplus receiver" OFF \
+  		COMPUTIME	"Enable Diem Computime Radio Clock" OFF \
+  		DCF7000		"Enable ELV/DCF7000 clock" OFF \
+  		HOPF6021	"Enable HOPF 6021 clock" OFF \
+  		MEINBERG	"Enable Meinberg clocks" OFF \
+  		RAWDCF		"Enable DCF77 raw time code" OFF \
+  		RCC8000		"Enable RCC 8000 clock" OFF \
+  		SCHMID		"Enable Schmid DCF77 clock" OFF \
+  		TRIMTAIP	"Enable Trimble GPS receiver/TAIP protocol" OFF \
+  		TRIMTSIP	"Enable Trimble GPS receiver/TSIP protocol" OFF \
+  		WHARTON		"Enable WHARTON 400A Series clock" OFF \
+  		VARITEXT	"Enable VARITEXT clock" OFF
+
+# Not supported by FreeBSD:   		TPRO		"Enable KSI/Odetics TPRO/S GPS receiver/IRIG" OFF \
+# XXX Broken under FreeBSD: TT560		"Enable TrueTime 560 IRIG-B decoder" OFF \
+
+NTP_DRIVERS= \
+  		BANCOMM \
+  		GPSVME \
+  		ACTS \
+  		ARBITER \
+  		ARCRON_MSF \
+  		AS2201 \
+  		ATOM \
+  		CHRONOLOG \
+  		CHU \
+  		AUDIO_CHU \
+  		DATUM \
+  		DUMBCLOCK \
+  		FG \
+  		HEATH \
+  		HOPFSERIAL \
+  		HOPFPCI \
+  		HPGPS \
+  		IRIG \
+  		JJY \
+  		JUPITER \
+  		LEITCH \
+  		LOCAL_CLOCK \
+  		MX4200 \
+  		NEOCLOCK4X \
+  		NMEA \
+  		ONCORE \
+  		PALISADE \
+  		PCF \
+  		PST \
+  		RIPENCC \
+  		SHM \
+  		SPECTRACOM \
+  		TRUETIME \
+  		ULINK \
+  		WWV \
+  		ZYFER \
+  		COMPUTIME \
+  		DCF7000 \
+  		HOPF6021 \
+  		MEINBERG \
+  		RAWDCF \
+  		RCC8000 \
+  		SCHMID \
+  		TRIMTAIP \
+  		TRIMTSIP \
+  		WHARTON \
+  		VARITEXT