13 files changed, 0 insertions, 622 deletions

diff --git a/net/Makefile b/net/Makefile
index 8947308068fb..f41206958fc3 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -977,7 +977,6 @@
     SUBDIR += qt5-network
     SUBDIR += qtweetlib
     SUBDIR += quagga
-    SUBDIR += quagga23
     SUBDIR += queso
     SUBDIR += quiterss
     SUBDIR += quoted
diff --git a/net/quagga23/Makefile b/net/quagga23/Makefile
deleted file mode 100644
index d5609ab9367a..000000000000
--- a/net/quagga23/Makefile
+++ /dev/null
@@ -1,100 +0,0 @@
-# Created by: Bruce M Simpson <bms@FreeBSD.org>
-# $FreeBSD$
-
-PORTNAME=	quagga
-PORTVERSION=	0.99.23.1
-PORTREVISION=	4
-CATEGORIES=	net ipv6
-MASTER_SITES=	SAVANNAH
-PKGNAMESUFFIX=	23
-
-MAINTAINER=	mat@FreeBSD.org
-COMMENT=	Free RIPv1, RIPv2, OSPFv2, BGP4, IS-IS route software
-
-LICENSE=	GPLv2
-
-BUILD_DEPENDS=	gawk:${PORTSDIR}/lang/gawk
-
-CONFLICTS=	openbgpd-[0-9]* openospfd-[0-9]* zebra-0* quagga-re-[0-9]*
-
-GNU_CONFIGURE=	yes
-CONFIGURE_ARGS=	--enable-exampledir=${PREFIX}/share/examples/quagga
-INSTALL_TARGET=	install-strip
-USES=		gmake libtool makeinfo perl5 readline compiler:c11 cpe
-USE_LDCONFIG=	yes
-USE_PERL5=	build
-
-INFO=		quagga
-
-OPTIONS_DEFINE=	ISISD PAM OSPF_OPAQUE_LSA RTADV SNMP TCPSOCKETS DLMALLOC \
-		NO_BGP_ANNOUNCE OSPF_NEXTHOP
-OPTIONS_SUB=	yes
-
-ISISD_DESC=		Enable experimental ISIS daemon
-PAM_DESC=		PAM authentication for vtysh
-OSPF_OPAQUE_LSA_DESC=	OSPF Opaque-LSA support (RFC2370)
-RTADV_DESC=		IPv6 Router Advertisements
-TCPSOCKETS_DESC=	Use TCP/IP sockets for protocol daemons
-DLMALLOC_DESC=		Use dlmalloc (makes bgpd much faster)
-NO_BGP_ANNOUNCE_DESC=	Turn off BGP route announcement
-OSPF_NEXTHOP_DESC=	Set ip next-hop in OSPF route maps
-
-ENABLE_USER?=	quagga
-ENABLE_GROUP?=	quagga
-
-USERS=		${ENABLE_USER}
-GROUPS=		${ENABLE_GROUP}
-
-SYSCONF_DIR?=	${ETCDIR}
-LOCALSTATE_DIR?=/var/run/quagga
-
-CONFIGURE_ARGS=	--enable-user=${ENABLE_USER} \
-		--enable-group=${ENABLE_GROUP} \
-		--sysconfdir=${SYSCONF_DIR} \
-		--localstatedir=${LOCALSTATE_DIR} \
-		--enable-vtysh
-
-.if defined(ENABLE_VTY_GROUP)
-CONFIGURE_ARGS+=--enable-vty-group=${ENABLE_VTY_GROUP}
-.endif
-
-ISISD_CONFIGURE_ENABLE=	isisd
-PAM_CONFIGURE_WITH=	libpam
-OSPF_OPAQUE_LSA_CONFIGURE_ENABLE=	opaque-lsa
-RTADV_CONFIGURE_ENABLE=	rtadv
-SNMP_CONFIGURE_ENABLE=	snmp
-SNMP_LIB_DEPENDS=	libnetsnmp.so:${PORTSDIR}/net-mgmt/net-snmp
-TCPSOCKETS_CONFIGURE_ENABLE=	tcp-zebra
-DLMALLOC_LIB_DEPENDS=	libdlmalloc.so:${PORTSDIR}/devel/libdlmalloc
-DLMALLOC_LIBS=		-L${LOCALBASE}/lib -ldlmalloc
-NO_BGP_ANNOUNCE_CONFIGURE_ON= --disable-bgp-announce
-NO_BGP_ANNOUNCE_CONFIGURE_OFF= --enable-bgp-announce
-OSPF_NEXTHOP_EXTRA_PATCH=	${PATCHDIR}/extra-patch-ospf-nexthop
-
-USE_RC_SUBR=	quagga watchquagga
-
-SUB_LIST+=	LOCALSTATE_DIR=${LOCALSTATE_DIR} \
-		SYSCONF_DIR=${SYSCONF_DIR}
-
-PLIST_SUB+=	LOCALSTATE_DIR=${LOCALSTATE_DIR} \
-		SYSCONF_DIR=${SYSCONF_DIR} \
-		ENABLE_USER=${ENABLE_USER} \
-		ENABLE_GROUP=${ENABLE_GROUP}
-
-pre-everything::
-	@${ECHO} "============================================================="
-	@${ECHO}
-	@${ECHO} "You can build ${PORTNAME} with the following options:"
-	@${ECHO}
-	@${ECHO} "ENABLE_USER       Specify user to run Quagga suite as"
-	@${ECHO} "ENABLE_GROUP      Specify group to run Quagga suite as"
-	@${ECHO} "ENABLE_VTY_GROUP  Specify group for vty socket ownership"
-	@${ECHO} "SYSCONF_DIR       Specify directory for Quagga configuration files"
-	@${ECHO} "LOCALSTATE_DIR    Specify directory for Quagga runtime files"
-
-post-install:
-	${MKDIR} ${STAGEDIR}${LOCALSTATE_DIR} ${STAGEDIR}${SYSCONF_DIR} \
-		${STAGEDIR}${EXAMPLESDIR}
-	@${MV} ${STAGEDIR}${ETCDIR}/* ${STAGEDIR}${EXAMPLESDIR}
-
-.include <bsd.port.mk>
diff --git a/net/quagga23/distinfo b/net/quagga23/distinfo
deleted file mode 100644
index de8659dbfa5d..000000000000
--- a/net/quagga23/distinfo
+++ /dev/null
@@ -1,2 +0,0 @@
-SHA256 (quagga-0.99.23.1.tar.gz) = 3abf2046bc27539ce2d17c238e06c8fd0d479a8e402580c6aa455808bd48e004
-SIZE (quagga-0.99.23.1.tar.gz) = 2526612
diff --git a/net/quagga23/files/extra-patch-ospf-nexthop b/net/quagga23/files/extra-patch-ospf-nexthop
deleted file mode 100644
index 4e62e42424ca..000000000000
--- a/net/quagga23/files/extra-patch-ospf-nexthop
+++ /dev/null
@@ -1,171 +0,0 @@
---- ospfd/ospf_asbr.c.orig	2014-08-25 16:56:53 UTC
-+++ ospfd/ospf_asbr.c
-@@ -122,6 +122,7 @@
- {
-   values->metric = -1;
-   values->metric_type = -1;
-+  values->nexthop.s_addr = -1;
- }
- 
- int
---- ospfd/ospf_asbr.h.orig	2014-08-25 16:56:53 UTC
-+++ ospfd/ospf_asbr.h
-@@ -27,6 +27,7 @@
- {
-   int32_t metric;
-   int32_t metric_type;
-+  struct in_addr nexthop;
- };
- 
- /* Redistributed external information. */
-@@ -50,6 +51,7 @@
-   struct route_map_set_values route_map_set;
- #define ROUTEMAP_METRIC(E)      (E)->route_map_set.metric
- #define ROUTEMAP_METRIC_TYPE(E) (E)->route_map_set.metric_type
-+#define ROUTEMAP_NEXTHOP(E)     (E)->route_map_set.nexthop
- };
- 
- #define OSPF_ASBR_CHECK_DELAY 30
---- ospfd/ospf_lsa.c.orig	2014-08-25 16:56:53 UTC
-+++ ospfd/ospf_lsa.c
-@@ -1633,7 +1633,8 @@
-   stream_put_ospf_metric (s, mvalue);
-   
-   /* Get forwarding address to nexthop if on the Connection List, else 0. */
--  fwd_addr = ospf_external_lsa_nexthop_get (ospf, ei->nexthop);
-+  fwd_addr = (ei->route_map_set.nexthop.s_addr != -1) ?
-+    ROUTEMAP_NEXTHOP (ei) : ospf_external_lsa_nexthop_get (ospf, ei->nexthop);
- 
-   /* Put forwarding address. */
-   stream_put_ipv4 (s, fwd_addr.s_addr);
---- ospfd/ospf_routemap.c.orig	2014-08-25 16:56:53 UTC
-+++ ospfd/ospf_routemap.c
-@@ -531,6 +531,62 @@
-   route_set_metric_type_free,
- };
- 
-+/* `set ip next-hop IP_ADDRESS' */
-+/* Set nexthop to object. */
-+static route_map_result_t
-+route_set_ip_nexthop (void *rule, struct prefix *prefix,
-+		      route_map_object_t type, void *object)
-+{
-+  struct in_addr *address;
-+  struct external_info *ei;
-+
-+  if (type == RMAP_OSPF)
-+    {
-+      /* Fetch routemap's rule information. */
-+      address = rule;
-+      ei = object;
-+
-+      /* Set metric out value. */
-+      ei->route_map_set.nexthop = *address;
-+    }
-+  return RMAP_OKAY;
-+}
-+
-+/* set ip next-hop compilation. */
-+static void *
-+route_set_ip_nexthop_compile (const char *arg)
-+{
-+  struct in_addr *address = NULL;
-+  int ret;
-+
-+  address = XMALLOC (MTYPE_ROUTE_MAP_COMPILED, sizeof (struct in_addr));
-+  ret = inet_aton (arg, address);
-+
-+  if (ret == 0)
-+    {
-+      XFREE (MTYPE_ROUTE_MAP_COMPILED, address);
-+      return NULL;
-+    }
-+
-+  return address;
-+}
-+
-+/* Free route map's compiled `set ip next-hop' value. */
-+static void
-+route_set_ip_nexthop_free (void *rule)
-+{
-+  XFREE (MTYPE_ROUTE_MAP_COMPILED, rule);
-+}
-+
-+/* Set ip next-hop rule structure. */
-+struct route_map_rule_cmd route_set_ip_nexthop_cmd =
-+{
-+  "ip next-hop",
-+  route_set_ip_nexthop,
-+  route_set_ip_nexthop_compile,
-+  route_set_ip_nexthop_free,
-+};
-+
- DEFUN (match_ip_nexthop,
-        match_ip_nexthop_cmd,
-        "match ip next-hop (<1-199>|<1300-2699>|WORD)",
-@@ -785,6 +841,49 @@
-        "OSPF[6] external type 1 metric\n"
-        "OSPF[6] external type 2 metric\n")
- 
-+DEFUN (set_ip_nexthop,
-+       set_ip_nexthop_cmd,
-+       "set ip next-hop A.B.C.D",
-+       SET_STR
-+       IP_STR
-+       "Next hop address\n"
-+       "IP address of next hop\n")
-+{
-+  union sockunion su;
-+  int ret;
-+
-+  ret = str2sockunion (argv[0], &su);
-+  if (ret < 0)
-+    {
-+      vty_out (vty, "%% Malformed Next-hop address%s", VTY_NEWLINE);
-+      return CMD_WARNING;
-+    }
-+
-+  return ospf_route_set_add (vty, vty->index, "ip next-hop", argv[0]);
-+}
-+
-+DEFUN (no_set_ip_nexthop,
-+       no_set_ip_nexthop_cmd,
-+       "no set ip next-hop",
-+       NO_STR
-+       SET_STR
-+       "Next hop address\n")
-+{
-+  if (argc == 0)
-+    return ospf_route_set_delete (vty, vty->index, "ip next-hop", NULL);
-+
-+  return ospf_route_set_delete (vty, vty->index, "ip next-hop", argv[0]);
-+}
-+
-+ALIAS (no_set_ip_nexthop,
-+       no_set_ip_nexthop_val_cmd,
-+       "no set ip next-hop A.B.C.D",
-+       NO_STR
-+       SET_STR
-+       IP_STR
-+       "Next hop address\n"
-+       "IP address of next hop\n")
-+
- /* Route-map init */
- void
- ospf_route_map_init (void)
-@@ -804,6 +903,7 @@
- 
-   route_map_install_set (&route_set_metric_cmd);
-   route_map_install_set (&route_set_metric_type_cmd);
-+  route_map_install_set (&route_set_ip_nexthop_cmd);
- 
-   install_element (RMAP_NODE, &match_ip_nexthop_cmd);
-   install_element (RMAP_NODE, &no_match_ip_nexthop_cmd);
-@@ -827,4 +927,7 @@
-   install_element (RMAP_NODE, &set_metric_type_cmd);
-   install_element (RMAP_NODE, &no_set_metric_type_cmd);
-   install_element (RMAP_NODE, &no_set_metric_type_val_cmd);
-+  install_element (RMAP_NODE, &set_ip_nexthop_cmd);
-+  install_element (RMAP_NODE, &no_set_ip_nexthop_cmd);
-+  install_element (RMAP_NODE, &no_set_ip_nexthop_val_cmd);
- }
diff --git a/net/quagga23/files/patch-configure b/net/quagga23/files/patch-configure
deleted file mode 100644
index b9640b0124b5..000000000000
--- a/net/quagga23/files/patch-configure
+++ /dev/null
@@ -1,11 +0,0 @@
---- configure.orig	2014-08-25 17:02:06 UTC
-+++ configure
-@@ -18158,7 +18158,7 @@ fi
- 
- 
- 
--if test "${enable_snmp}" != ""; then
-+if test "x${enable_snmp}" != "xno"; then
-    if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}net-snmp-config", so it can be a program name with args.
- set dummy ${ac_tool_prefix}net-snmp-config; ac_word=$2
diff --git a/net/quagga23/files/patch-doc__bgpd.8 b/net/quagga23/files/patch-doc__bgpd.8
deleted file mode 100644
index 0eb5e80c6256..000000000000
--- a/net/quagga23/files/patch-doc__bgpd.8
+++ /dev/null
@@ -1,21 +0,0 @@
---- doc/bgpd.8.orig	2014-08-25 16:56:53 UTC
-+++ doc/bgpd.8
-@@ -28,6 +28,8 @@
- ] [
- .B \-g
- .I group
-+] [
-+.B \--no_kernel
- ]
- .SH DESCRIPTION
- .B bgpd 
-@@ -76,6 +78,9 @@
- .TP
- \fB\-v\fR, \fB\-\-version\fR
- Print the version and exit.
-+.TP
-+\fB\--no_kernel\fR
-+Prevents route updates to be submitted to the kernel.
- .SH FILES
- .TP
- .BI /usr/local/sbin/bgpd
diff --git a/net/quagga23/files/patch-lib__zebra.h b/net/quagga23/files/patch-lib__zebra.h
deleted file mode 100644
index c868e75ca6e6..000000000000
--- a/net/quagga23/files/patch-lib__zebra.h
+++ /dev/null
@@ -1,12 +0,0 @@
---- lib/zebra.h.orig	2014-08-25 16:56:53 UTC
-+++ lib/zebra.h
-@@ -358,7 +358,8 @@
-  * OpenBSD: network byte order, apart from older versions which are as per 
-  *          *BSD
-  */
--#if defined(__NetBSD__) || defined(__FreeBSD__) \
-+#if defined(__NetBSD__) \
-+   || (defined(__FreeBSD__) && (__FreeBSD_version < 1100030)) \
-    || (defined(__OpenBSD__) && (OpenBSD < 200311)) \
-    || (defined(__APPLE__)) \
-    || (defined(SUNOS_5) && defined(WORDS_BIGENDIAN))
diff --git a/net/quagga23/files/patch-vtysh__extract.pl.in b/net/quagga23/files/patch-vtysh__extract.pl.in
deleted file mode 100644
index dd2e22811db4..000000000000
--- a/net/quagga23/files/patch-vtysh__extract.pl.in
+++ /dev/null
@@ -1,11 +0,0 @@
---- vtysh/extract.pl.in.orig	2014-08-25 16:56:53 UTC
-+++ vtysh/extract.pl.in
-@@ -63,7 +63,7 @@
- foreach (@ARGV) {
-     $file = $_;
- 
--    open (FH, "@CPP@ -DHAVE_CONFIG_H -DVTYSH_EXTRACT_PL -DHAVE_IPV6 -I@top_builddir@ -I@srcdir@/ -I@srcdir@/.. -I@top_srcdir@/lib -I@top_builddir@/lib -I@top_srcdir@/isisd/topology @CPPFLAGS@ $file |");
-+    open (FH, "@CPP@ -DHAVE_CONFIG_H -DVTYSH_EXTRACT_PL -DHAVE_IPV6 -I@top_builddir@ -I@srcdir@/ -I@srcdir@/.. -I@top_srcdir@/lib -I@top_builddir@/lib -I/usr/local/include -I@top_srcdir@/isisd/topology @CPPFLAGS@ $file |");
-     local $/; undef $/;
-     $line = <FH>;
-     close (FH);
diff --git a/net/quagga23/files/quagga.in b/net/quagga23/files/quagga.in
deleted file mode 100644
index a092650dedce..000000000000
--- a/net/quagga23/files/quagga.in
+++ /dev/null
@@ -1,148 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-
-# PROVIDE: quagga
-# REQUIRE: netif routing 
-# KEYWORD: nojail shutdown
-
-# Add the following line to /etc/rc.conf to enable quagga:
-#  quagga_enable="YES"
-#
-# You may also wish to use the following variables to fine-tune startup:
-#  quagga_flags=""
-#  quagga_daemons="zebra ripd ripngd ospfd ospf6d bgpd isisd"
-#  quagga_vysh_boot="YES"
-# Per daemon tuning may be done with daemon_name_flags
-#  zebra_flags="-P 0"
-#  bgpd_flags="-nrP 0" and so on
-# If you want to give the routing deamons a chance to catchup before
-# continueing, set quagga_wait_for to a "default" or certain prefix.
-#  quagga_wait_for="default"
-# Set the time limit for the wait.
-#  quagga_wait_seconds="90"
-#
-# If the quagga daemons require additional shared libraries to start,
-# use the following variable to run ldconfig(8) in advance:
-#  quagga_extralibs_path="/usr/local/lib ..."
-#
-
-. /etc/rc.subr
-
-name=quagga
-rcvar=quagga_enable
-
-start_postcmd=start_postcmd
-stop_postcmd="rm -f $pidfile"
-configtest_cmd=check_config
-extra_commands=configtest
-command_args="-d"
-
-load_rc_config $name
-
-quagga_enable=${quagga_enable:-"NO"}
-quagga_flags=${quagga_flags:-""}
-quagga_daemons=${quagga_daemons:-"zebra ripd ripngd ospfd ospf6d bgpd isisd"}
-quagga_vtysh_boot=${quagga_vtysh_boot:-"NO"}
-quagga_wait_for=${quagga_wait_for:-""}
-quagga_wait_seconds=${quagga_wait_seconds:-"90"}
-
-check_config()
-{
-    echo "Checking $daemon.conf"
-    $command $daemon_flags -C
-    result=$?
-    if [ "$result" -eq "0" ]; then
-	echo "OK"
-    else
-	echo "FAILED"
-	exit
-    fi
-}
-
-start_postcmd()
-{
-	local waited_for
-	waited_for=0
-	# Wait only when last daemon has started.
-	if [ "${quagga_daemons}" = "${quagga_daemons% ${name}}" ]; then
-		return;
-	fi
-        if [ -n "${quagga_wait_for}" ]; then
-		echo Waiting for ${quagga_wait_for} route...
-		while [ ${waited_for} -lt ${quagga_wait_seconds} ]; do
-			/sbin/route -n get ${quagga_wait_for} >/dev/null 2>&1 && break;
-			waited_for=$((${waited_for}+1))
-			sleep 1;
-		done
-		[ ${waited_for} -lt ${quagga_wait_seconds} ] || echo Giving up...
-	fi
-}
-
-do_cmd()
-{
-	local ret
-	ret=0
-	for daemon in ${quagga_daemons}; do
-	    command=%%PREFIX%%/sbin/${daemon}
-	    required_files=%%SYSCONF_DIR%%/${daemon}.conf
-	    pidfile=%%LOCALSTATE_DIR%%/${daemon}.pid
-	    if [ ${quagga_cmd} = "restart" -o ${quagga_cmd} = "start" ]; then
-		check_config
-	    fi
-	    if [ ${quagga_cmd} = "start" -a ! -f ${required_files} ]; then
-			continue
-	    fi
-	    if [ ${quagga_cmd} = "stop" -a -z $(check_process ${command}) ]; then
-			continue
-	    fi
-	    eval flags=\$\{${daemon}_flags:-\"${quagga_flags}\"\}
-	    name=${daemon}
-	    _rc_restart_done=false
-	    run_rc_command "$1" || ret=1
-	done
-	if checkyesno quagga_vtysh_boot; then
-	    echo "Booting for integrated-vtysh-config..."
-	    %%PREFIX%%/bin/vtysh -b
-	fi
-	return ${ret}
-}
-
-quagga_cmd=$1
-
-case "$1" in
-    force*)
-	quagga_cmd=${quagga_cmd#force}
-	;;
-    fast*)
-	quagga_cmd=${quagga_cmd#fast}
-	;;
-esac
-shift
-
-if [ $# -ge 1 ]; then
-	quagga_daemons="$*"
-fi
-
-case "${quagga_cmd}" in
-    start)
-	if [ -n "${quagga_extralibs_path}" ]; then
-	    /sbin/ldconfig -m ${quagga_extralibs_path}
-	fi
-	do_cmd "start"
-	;;
-    stop)
-	quagga_daemons=$(reverse_list ${quagga_daemons})
-	do_cmd "stop"
-	;;
-    restart)
-	quagga_daemons=$(reverse_list ${quagga_daemons})
-    	do_cmd "stop"
-	quagga_daemons=$(reverse_list ${quagga_daemons})
-	do_cmd "start"
-	;;
-    *)
-	do_cmd "${quagga_cmd}"
-	;;
-esac
diff --git a/net/quagga23/files/watchquagga.in b/net/quagga23/files/watchquagga.in
deleted file mode 100644
index 9e6f23dd4724..000000000000
--- a/net/quagga23/files/watchquagga.in
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-
-# PROVIDE: watchquagga
-# REQUIRE: NETWORKING quagga
-# KEYWORD: shutdown
-
-# Add the following line to /etc/rc.conf to enable watchquagga:
-# watchquagga_enable="YES"
-#
-# You may also wish to use the following variables to fine-tune startup:
-# watchquagga_flags
-
-. /etc/rc.subr
-
-name=watchquagga
-rcvar=watchquagga_enable
-
-load_rc_config $name
-
-stop_postcmd="rm -f $pidfile"
-
-watchquagga_enable=${watchquagga_enable:-"NO"}
-
-command=%%PREFIX%%/sbin/watchquagga
-pidfile=%%LOCALSTATE_DIR%%/watchquagga.pid
-
-run_rc_command "$1"
diff --git a/net/quagga23/pkg-descr b/net/quagga23/pkg-descr
deleted file mode 100644
index 2ec7ce95d463..000000000000
--- a/net/quagga23/pkg-descr
+++ /dev/null
@@ -1,8 +0,0 @@
-Quagga is a routing software suite, providing implementations of
-OSPFv2, OSPFv3, RIP v1 and v2, RIPv3, BGPv4 and experemental ISIS
-for Unix platforms, particularly FreeBSD and Linux and also NetBSD,
-to mention a few. Quagga is a fork of GNU Zebra which was developed
-by KunihiroIshiguro. The Quagga tree aims to build a more involved
-community around Quagga than the current centralised model of GNU Zebra.
-
-WWW: http://www.quagga.net/
diff --git a/net/quagga23/pkg-message b/net/quagga23/pkg-message
deleted file mode 100644
index 054e520e177e..000000000000
--- a/net/quagga23/pkg-message
+++ /dev/null
@@ -1,13 +0,0 @@
-==========================================================
-To enable quagga, add the following lines to rc.conf:
-
-defaultrouter="NO"
-quagga_enable="YES"
-
-Also, you may wish to set the following options:"
-quagga_daemons="zebra bgpd etc..."
-quagga_flags="...."
-quagga_extralibs_path="... ..."
-router_enable="NO"
-watchquagga_enable="YES"
-==========================================================
diff --git a/net/quagga23/pkg-plist b/net/quagga23/pkg-plist
deleted file mode 100644
index f4721dff91e5..000000000000
--- a/net/quagga23/pkg-plist
+++ /dev/null
@@ -1,94 +0,0 @@
-sbin/babeld
-sbin/bgpd
-%%ISISD%%sbin/isisd
-sbin/ospf6d
-%%OSPF_OPAQUE_LSA%%sbin/ospfclient
-sbin/ospfd
-sbin/ripd
-sbin/ripngd
-sbin/watchquagga
-sbin/zebra
-bin/vtysh
-lib/libospf.a
-lib/libospf.so
-lib/libospf.so.0
-lib/libospf.so.0.0.0
-%%OSPF_OPAQUE_LSA%%lib/libospfapiclient.a
-%%OSPF_OPAQUE_LSA%%lib/libospfapiclient.so
-%%OSPF_OPAQUE_LSA%%lib/libospfapiclient.so.0
-%%OSPF_OPAQUE_LSA%%lib/libospfapiclient.so.0.0.0
-lib/libzebra.a
-lib/libzebra.so
-lib/libzebra.so.0
-lib/libzebra.so.0.0.0
-include/quagga/buffer.h
-include/quagga/checksum.h
-include/quagga/command.h
-include/quagga/distribute.h
-include/quagga/filter.h
-include/quagga/getopt.h
-include/quagga/hash.h
-include/quagga/if.h
-include/quagga/if_rmap.h
-include/quagga/jhash.h
-include/quagga/keychain.h
-include/quagga/libospf.h
-include/quagga/linklist.h
-include/quagga/log.h
-include/quagga/md5.h
-include/quagga/memory.h
-include/quagga/memtypes.h
-include/quagga/network.h
-%%OSPF_OPAQUE_LSA%%include/quagga/ospfapi/ospf_apiclient.h
-include/quagga/ospfd/ospf_api.h
-include/quagga/ospfd/ospf_asbr.h
-include/quagga/ospfd/ospf_dump.h
-include/quagga/ospfd/ospf_ism.h
-include/quagga/ospfd/ospf_lsa.h
-include/quagga/ospfd/ospf_lsdb.h
-include/quagga/ospfd/ospf_nsm.h
-include/quagga/ospfd/ospf_opaque.h
-include/quagga/ospfd/ospfd.h
-include/quagga/plist.h
-include/quagga/pqueue.h
-include/quagga/prefix.h
-include/quagga/privs.h
-include/quagga/routemap.h
-include/quagga/route_types.h
-include/quagga/sigevent.h
-include/quagga/smux.h
-include/quagga/sockopt.h
-include/quagga/sockunion.h
-include/quagga/str.h
-include/quagga/stream.h
-include/quagga/table.h
-include/quagga/thread.h
-include/quagga/vector.h
-include/quagga/version.h
-include/quagga/vty.h
-include/quagga/workqueue.h
-include/quagga/zassert.h
-include/quagga/zclient.h
-include/quagga/zebra.h
-%%EXAMPLESDIR%%/babeld.conf.sample
-%%EXAMPLESDIR%%/bgpd.conf.sample
-%%EXAMPLESDIR%%/bgpd.conf.sample2
-%%ISISD%%%%EXAMPLESDIR%%/isisd.conf.sample
-%%EXAMPLESDIR%%/ospf6d.conf.sample
-%%EXAMPLESDIR%%/ospfd.conf.sample
-%%EXAMPLESDIR%%/ripd.conf.sample
-%%EXAMPLESDIR%%/ripngd.conf.sample
-%%EXAMPLESDIR%%/vtysh.conf.sample
-%%EXAMPLESDIR%%/zebra.conf.sample
-man/man1/vtysh.1.gz
-man/man8/bgpd.8.gz
-%%ISISD%%man/man8/isisd.8.gz
-man/man8/ospf6d.8.gz
-man/man8/ospfd.8.gz
-%%OSPF_OPAQUE_LSA%%man/man8/ospfclient.8.gz
-man/man8/ripd.8.gz
-man/man8/ripngd.8.gz
-man/man8/watchquagga.8.gz
-man/man8/zebra.8.gz
-@dir(%%ENABLE_USER%%,%%ENABLE_GROUP%%,750) %%LOCALSTATE_DIR%%
-@dir(%%ENABLE_USER%%,%%ENABLE_GROUP%%,750) %%ETCDIR%%