1 files changed, 0 insertions, 270 deletions

diff --git a/ports-mgmt/portmk/Mk/bsd.perl.mk b/ports-mgmt/portmk/Mk/bsd.perl.mk
deleted file mode 100644
index 16871cccad07..000000000000
--- a/ports-mgmt/portmk/Mk/bsd.perl.mk
+++ /dev/null
@@ -1,270 +0,0 @@
-#-*- mode: makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD$
-#
-# bsd.perl.mk - Support for Perl-based ports.
-#
-# Created by: Gabor Kovesdan <gabor@FreeBSD.org>
-#
-# For FreeBSD committers:
-# Please send all suggested changes to the maintainer instead of committing
-# them to CVS yourself.
-#
-# PERL5			- Set to full path of perl5, either in the system or
-#				  installed from a port.
-# PERL			- Set to full path of perl5, either in the system or
-#				  installed from a port, but without the version number.
-#				  Use this if you need to replace "#!" lines in scripts.
-# PERL_VERSION	- Full version of perl5 (see below for current value).
-# PERL_VER		- Short version of perl5 (see below for current value).
-# PERL_LEVEL	- Perl version as an integer of the form MNNNPP, where
-#				  M is major version, N is minor version, and P is
-#				  the patch level. E.g., PERL_VERSION=5.6.1 would give
-#				  a PERL_LEVEL of 500601. This can be used in comparisons
-#				  to determine if the version of perl is high enough,
-#				  whether a particular dependency is needed, etc.
-# PERL_ARCH		- Directory name of architecture dependent libraries
-#				  (value: ${ARCH}-freebsd).
-# PERL_PORT		- Name of the perl port that is installed
-#				  (value: perl5)
-# SITE_PERL		- Directory name where site specific perl packages go.
-#				  This value is added to PLIST_SUB.
-# USE_PERL5		- If your port needs a specific version of Perl, you
-#				  can easily specify that with this knob.  If
-#				  you need a certain minimal version, but don't
-#				  care if about the upperversion, just put the
-#				  + sign behind the version.  If you want to
-#				  specify a latest version your port can be used
-#				  with, suffix the version number with a - sign.
-#				  Exact version can also be specified if you just
-#				  set USE_PERL5 to the desired version.  If you
-#				  just set USE_PERL5 to "yes", Perl will be
-#				  pulled in as a dependency but no version check
-#				  is done.
-# USE_PERL5_REASON
-#				- Along with USE_PERL5, you can set a specific reason,
-#				  why a given version is required.
-#
-# Examples:
-# 	USE_PERL5=	yes	# port requires any version of Perl5 to build.
-# 	USE_PERL5=	5.6.0+	# port requires at least Perl 5.6.0 to build.
-#	USE_PERL5=	5.8.2	# port is only usable with Perl 5.8.2.
-#	USE_PERL5=	5.8.6-	# port is only usbale with Perl 5.8.6 or prior.
-#
-# This line along with a properly set USE_PERL5 will give the user a reason,
-# why the specific ports cannot be installed into the given environment.
-#
-#	USE_PERL5_REASON=	this module is already part of your Perl version
-#
-# PERL_CONFIGURE
-#				- Configure using Perl's MakeMaker.  Implies USE_PERL5.
-#				  The version requirement can be specified here,
-#				  as well.
-# USE_PERL5_BUILD
-#				- If set, this port uses perl5 in one or more of the
-#				  extract, patch, build or install phases.
-#				  The version requirement can be specified here,
-#				  as well.
-# USE_PERL5_RUN	- If set, this port uses perl5 for running.  The
-#			 	  version requirement can be specified here,
-#				  as well.
-# PERL_MODBUILD	- Use Module::Build to configure, build and install
-#				  port.  The version requirement can be specified
-#				  here, as well.
-#
-# WANT_PERL5	- Set this is your port conditionally depends on Perl.
-#				  This MUST appear before the inclusion of bsd.port.pre.mk.
-
-.if !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include)
-
-Perl_Pre_Include=			bsd.perl.mk
-PERL_Include_MAINTAINER=	perl@FreeBSD.org
-
-# XXX to remain undefined until all ports that require Perl are fixed
-# to set one of the conditionals that force the inclusion of bsd.perl.mk
-.if defined(_PERL_REFACTORING_COMPLETE)
-
-PERL_VERSION?=	5.8.8
-PERL_VER?=		5.8.8
-
-.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
-perl_major=		${PERL_VERSION:C|\..*||}
-_perl_minor=	${PERL_VERSION:S|^${perl_major}||:S|^.||:C|\..*||}
-_perl_patch=	${PERL_VERSION:S|^${perl_major}||:S|^.${_perl_minor}||:S|^.||:C|\..*||}
-perl_minor=		${_perl_minor:S|^|000|:C|.*(...)|\1|}
-perl_patch=		${_perl_patch:S|^|00|:C|.*(..)|\1|}
-PERL_LEVEL=		${perl_major}${perl_minor}${perl_patch}
-.else
-PERL_LEVEL=		0
-.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
-
-PERL_ARCH?=		mach
-
-.if ${PERL_LEVEL} >= 500800
-PERL_PORT?=	perl5.8
-.else # ${PERL_LEVEL} < 500800
-PERL_PORT?=	perl5
-.endif
-
-SITE_PERL_REL?=	lib/perl5/site_perl/${PERL_VER}
-SITE_PERL?=	${LOCALBASE}/${SITE_PERL_REL}
-
-PERL5=		${LOCALBASE}/bin/perl${PERL_VERSION}
-PERL=		${LOCALBASE}/bin/perl
-
-.endif  # defined(_PERL_REFACTORING_COMPLETE)
-
-# Decide where to look for the version string
-.ifdef USE_PERL5
-USE_PERL5_STRING=	${USE_PERL5}
-.elifdef USE_PERL5_BUILD
-USE_PERL5_STRING=	${USE_PERL5_BUILD}
-.elifdef USE_PERL5_RUN
-USE_PERL5_STRING=	${USE_PERL5_RUN}
-.elifdef PERL_MODBUILD
-USE_PERL5_STRING=	${PERL_MODBUILD}
-.elifdef PERL_CONFIGURE
-USE_PERL5_STRING=	${PERL_CONFIGURE}
-.else
-USE_PERL5_STRING=	yes  # currently unreachable
-.endif
-
-.if ${USE_PERL5_STRING:L} != "yes"
-want_perl_sign=		${USE_PERL5_STRING:C|^[0-9.]+||}
-want_perl_ver=		${USE_PERL5_STRING:S|${want_perl_sign}$||}
-want_perl_major=	${want_perl_ver:C|\..*||}
-_want_perl_minor=	${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
-_want_perl_patch=	${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
-want_perl_minor=	${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
-want_perl_patch=	${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
-USE_PERL5_LEVEL=	${want_perl_major}${want_perl_minor}${want_perl_patch}
-
-# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
-.if empty(_want_perl_minor)
-masked_PERL_LEVEL=	${PERL_LEVEL:C|(.....)$|00000|}
-.elif empty(_want_perl_patch)
-masked_PERL_LEVEL=	${PERL_LEVEL:C|(..)$|00|}
-.else
-masked_PERL_LEVEL=	${PERL_LEVEL}
-.endif
-
-.if ${want_perl_sign} == "+"
-.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
-USE_PERL5_REASON?=	requires Perl ${want_perl_ver} or later, install lang/perl5.8 and try again
-IGNORE=	${USE_PERL5_REASON}
-.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
-.elif ${want_perl_sign} == ""
-.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
-USE_PERL5_REASON?=	requires Perl ${want_perl_ver} exactly
-IGNORE=	${USE_PERL5_REASON}
-.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
-.elif ${want_perl_sign} == "-"
-.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
-USE_PERL5_REASON?=	requires a Perl version earlier than ${want_perl_ver}
-IGNORE=	${USE_PERL5_REASON}
-.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
-.else # wrong suffix
-IGNORE=	improper use of USE_PERL5
-.endif
-.endif #${USE_PERL5_STRING:L} != "yes"
-
-.endif # !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include)
-
-.if defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include)
-
-Perl_Post_Include=		bsd.perl.mk
-
-.if defined(_PERL_REFACTORING_COMPLETE)
-
-PLIST_SUB+=	PERL_VERSION=${PERL_VERSION} \
-			PERL_VER=${PERL_VER} \
-			PERL_ARCH=${PERL_ARCH} \
-			SITE_PERL=${SITE_PERL_REL}
-
-.endif  # defined(_PERL_REFACTORING_COMPLETE)
-
-.if !defined(PERL) || !defined(PERL5) || !defined(PERL_PORT) || !defined(PERL_VERSION)
-IGNORE=		missing define for WANT_PERL, USE_PERL5, or similar before bsd.port. pre.mk inclusion
-.endif
-
-.if defined(PERL_MODBUILD)
-PERL_CONFIGURE=		yes
-CONFIGURE_SCRIPT?=	Build.PL
-.if ${PORTNAME} != Module-Build
-BUILD_DEPENDS+=		${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build
-.endif
-ALL_TARGET?=
-PL_BUILD?=		Build
-CONFIGURE_ARGS+= \
-	create_packlist=0 \
-	install_path=lib="${PREFIX}/${SITE_PERL_REL}" \
-	install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \
-	install_path=script="${PREFIX}/bin" \
-	install_path=bin="${PREFIX}/bin" \
-	install_path=libdoc="${MAN3PREFIX}/man/man3" \
-	install_path=bindoc="${MAN1PREFIX}/man/man1"
-.elif defined(PERL_CONFIGURE)
-CONFIGURE_ARGS+=	INSTALLDIRS="site"
-.endif # defined(PERL_MODBUILD)
-
-.if defined(PERL_CONFIGURE)
-USE_PERL5=	yes
-# Disable AutoInstall from attempting to install from CPAN directly in
-# the case of missing dependencies.  This causes the build to loop on
-# the build cluster asking for interactive input.
-CONFIGURE_ENV+= "PERL_EXTUTILS_AUTOINSTALL=--skipdeps"
-.if defined(BATCH) && !defined(IS_INTERACTIVE)
-CONFIGURE_ENV+=	PERL_MM_USE_DEFAULT="YES"
-.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
-.endif # defined(PERL_CONFIGURE)
-
-.if defined(USE_PERL5) || defined(USE_PERL5_BUILD)
-EXTRACT_DEPENDS+=	${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
-PATCH_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
-BUILD_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
-.endif
-.if defined(USE_PERL5) || defined(USE_PERL5_RUN)
-RUN_DEPENDS+=		${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
-.endif
-
-.if defined(PERL_CONFIGURE)
-CONFIGURE_ARGS+=	CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
-			INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
-CONFIGURE_SCRIPT?=	Makefile.PL
-MAN3PREFIX?=		${PREFIX}/lib/perl5/${PERL_VERSION}
-.undef HAS_CONFIGURE
-.endif # defined(PERL_CONFIGURE)
-
-.if defined(PERL_CONFIGURE)
-.if !target(do-configure)
-# XXX MCL had to duplicate the first block; implies more refactoring needed
-do-configure:
-	@if [ -f ${SCRIPTDIR}/configure ]; then \
-		cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
-		  ${SCRIPTDIR}/configure; \
-	fi
-	@cd ${CONFIGURE_WRKSRC} && \
-		${SETENV} ${CONFIGURE_ENV} \
-		${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
-.if !defined(PERL_MODBUILD)
-	@cd ${CONFIGURE_WRKSRC} && \
-		${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
-.endif # !defined(PERL_MODBUILD)
-.endif # !target(do-configure)
-.endif # defined(PERL_CONFIGURE)
-
-.if defined(PERL_MODBUILD)
-.if !target(do-build)
-do-build:
-	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET})
-.endif # !target(do-build)
-
-.if !defined(USE_GMAKE)
-.if !target(do-install)
-do-install:
-	@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET})
-.endif # !target(do-install)
-.endif # !defined(USE_GMAKE)
-.endif # defined(PERL_MODBUILD)
-.endif # defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include)