4 files changed, 1091 insertions, 92 deletions

diff --git a/print/ghostscript7/Makefile b/print/ghostscript7/Makefile
index 7c384f557510..5a981027b560 100644
--- a/print/ghostscript7/Makefile
+++ b/print/ghostscript7/Makefile
@@ -7,7 +7,7 @@
 
 PORTNAME=	ghostscript
 PORTVERSION=	${GS_VERSION}
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	print
 MASTER_SITES=	${MASTER_SITE_GNU:S/$/:gs_fonts/} \
 		${MASTER_SITE_SOURCEFORGE:S/$/:gs_srcs,gprint,bjc250/} \
@@ -237,7 +237,7 @@ MJC_SRCS=	${MJC_NAME}.tar.gz
 # GDI - additional driver for Samsung SmartGDI laser printers
 GDI=		gdi
 GDI_NAME=	Samsung-SmartGDI-all-GS
-GDI_SRCS=	${GDI_NAME}.tar.gz
+GDI_SRCS=	${GDI_NAME}.orig.tar.gz
 
 # LXM3200 - additional driver for Lexmark 3200/Z12/Z22/Z31/Z32
 LXM3200=	lxm3200
@@ -260,94 +260,94 @@ CONTRIB_UPP=	lqx70ch.upp lqx70cl.upp lqx70cm.upp \
 		stc740ih.upp stc740p.upp stc740pl.upp
 
 .include <bsd.port.pre.mk>
-#.SILENT:
+.SILENT:
 
 pre-everything::
 .if !defined(A4)
-	@${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
+	${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
 .else
-	@${ECHO_MSG} "Using -DA4 for compilation."
+	${ECHO_MSG} "Using -DA4 for compilation."
 .endif
 
 post-extract:
-	@${ECHO_MSG} ">>> in post-extract ..."
+	${ECHO_MSG} ">>> in post-extract ..."
 # ** 3rd party driver **
 # Note: don't forget to add those devices in scripts/configure and
 # configure.batch, which update unix-gcc.mak to build gs with these
 # new devices !
 #
 # for HP2200 driver
-	@${ECHO_MSG} ">>>   extracting ${HP2200_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${HP2200_SRCS} ..."
 	${MKDIR} ${WRKSRC}/${HP2200}
 	${TAR} -C ${WRKSRC}/${HP2200} -xzf ${DISTDIR}/${DIST_SUBDIR}/${HP2200_SRCS}
 # for HPDJ driver
-	@${ECHO_MSG} ">>>   extracting ${HPDJ_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${HPDJ_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${HPDJ_SRCS}
 	${TAR} -C ${WRKSRC}/src -xf ${WRKSRC}/${HPDJ_NAME}/${HPDJ}.tar
 # for PCL3 driver
-	@${ECHO_MSG} ">>>   extracting ${PCL3_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${PCL3_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${PCL3_SRCS}
 	${LN} -sf ${PCL3_NAME} ${WRKSRC}/${PCL3}
 	${TAR} -C ${WRKSRC}/${PCL3_NAME} -xf \
 		${WRKSRC}/${PCL3_NAME}/${PCL3}.tar
 # for DJ970 driver
-	@${ECHO_MSG} ">>>   extracting ${DJ970_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${DJ970_SRCS} ..."
 	${CP} ${DISTDIR}/${DIST_SUBDIR}/${DJ970_SRCS} ${WRKSRC}/src
 	${GUNZIP_CMD} ${WRKSRC}/src/${DJ970_SRCS}
 # for Gimp-Print driver
-	@${ECHO_MSG} ">>>   extracting ${GPRINT_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${GPRINT_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GPRINT_SRCS}
 # for MD2K driver
-	@${ECHO_MSG} ">>>   extracting ${MD2K_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${MD2K_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MD2K_SRCS}
 	${LN} -sf ${MD2K_NAME} ${WRKSRC}/${MD2K}
 # for ALPS driver
-	@${ECHO_MSG} ">>>   extracting ${ALPS_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${ALPS_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${ALPS_SRCS}
 	${LN} -sf ${ALPS_NAME} ${WRKSRC}/${ALPS}
 # for BJ10V driver
-	@${ECHO_MSG} ">>>   extracting ${BJ10V_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${BJ10V_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${BJ10V_SRCS}
 # for BJC250 driver
-	@${ECHO_MSG} ">>>   extracting ${BJC250_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${BJC250_SRCS} ..."
 	${MKDIR} ${WRKSRC}/${BJC250_NAME}/src
 	${GZCAT} ${DISTDIR}/${DIST_SUBDIR}/${BJC250_SRCS} | \
 		${PATCH} -d ${WRKSRC}/${BJC250_NAME} -f -s -N -E -p1 \
 		2>/dev/null || ${TRUE}
 	${LN} -sf ${BJC250_NAME} ${WRKSRC}/${BJC250}
 # for CPCA driver
-	@${ECHO_MSG} ">>>   extracting ${CPCA_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${CPCA_SRCS} ..."
 	${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${CPCA_SRCS}
 # for LIPS driver
-	@${ECHO_MSG} ">>>   extracting ${LIPS_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${LIPS_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LIPS_SRCS}
 	${LN} -sf ${LIPS_NAME} ${WRKSRC}/${LIPS}
 # for DMPRT driver
-	@${ECHO_MSG} ">>>   extracting ${DMPRT_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${DMPRT_SRCS} ..."
 	${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${DMPRT_SRCS}
 # for EPAG driver
-	@${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${EPAG_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPAG_SRCS}
 # for EPLASER driver
-	@${ECHO_MSG} ">>>   extracting ${EPLASER_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${EPLASER_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${EPLASER_SRCS}
 	${LN} -sf ${EPLASER_NAME} ${WRKSRC}/${EPLASER}
 # for MJC driver
-	@${ECHO_MSG} ">>>   extracting ${MJC_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${MJC_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${MJC_SRCS}
 	${LN} -sf ${MJC_NAME} ${WRKSRC}/${MJC}
 # for GDI driver
-	@${ECHO_MSG} ">>>   extracting ${GDI_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${GDI_SRCS} ..."
 	${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${DIST_SUBDIR}/${GDI_SRCS}
 # for LXM3200 driver
-	@${ECHO_MSG} ">>>   extracting ${LXM3200_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${LXM3200_SRCS} ..."
 	${TAR} -C ${WRKSRC} -xzf ${DISTDIR}/${DIST_SUBDIR}/${LXM3200_SRCS}
 	${LN} -sf ${LXM3200_NAME} ${WRKSRC}/${LXM3200}
 # for LX5000 driver
-	@${ECHO_MSG} ">>>   extracting ${LX5000_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${LX5000_SRCS} ..."
 	${CP} ${DISTDIR}/${DIST_SUBDIR}/${LX5000_SRCS} ${WRKSRC}/src
 # for LEX7000 driver
-	@${ECHO_MSG} ">>>   extracting ${LEX7000_SRCS} ..."
+	${ECHO_MSG} ">>>   extracting ${LEX7000_SRCS} ..."
 	${MKDIR} ${WRKSRC}/${LEX7000}
 	${CAT} ${DISTDIR}/${DIST_SUBDIR}/${LEX7000_SRCS} | \
 		${PATCH} -d ${WRKSRC}/${LEX7000} -f -s -N -E -p1 \
@@ -368,86 +368,86 @@ post-patch:
 # here we apply the modifications necessary to build the 3rd party drivers
 # advantage: you see unmodified makefiles after a pure make extract
 pre-configure:
-	@${ECHO_MSG} ">>> in pre-configure ..."
+	${ECHO_MSG} ">>> in pre-configure ..."
 # for HP2200 driver
-	@${ECHO_MSG} ">>>   adding ${HP2200} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${HP2200} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/chp2200.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for HPDJ driver
-	@${ECHO_MSG} ">>>   adding ${HPDJ} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${HPDJ} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/src/contrib.mak-5.94.add \
 		>> ${WRKSRC}/src/contrib.mak
 # for PCL3 driver
-	@${ECHO_MSG} ">>>   adding ${PCL3} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${PCL3} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${PCL3_NAME}/src/contrib.mak-7.00.add \
 		>> ${WRKSRC}/src/contrib.mak
 # for Gimp-Print driver
-	@${ECHO_MSG} ">>>   adding ${GPRINT} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${GPRINT} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/stp.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for MD2K driver
-	@${ECHO_MSG} ">>>   adding ${MD2K} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${MD2K} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${MD2K_NAME}/gdevmd2k.mak-5.50 \
 		>> ${WRKSRC}/src/contrib.mak
 # for ALPS driver
-	@${ECHO_MSG} ">>>   adding ${ALPS} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${ALPS} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${ALPS_NAME}/gdevalps.mak-5.50 \
 		>> ${WRKSRC}/src/contrib.mak
 # for BJ10V driver
-	@${ECHO_MSG} ">>>   adding ${BJ10V} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${BJ10V} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${BJ10V_NAME}/gdev10v.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for BJC250 driver
-	@${ECHO_MSG} ">>>   adding ${BJC250} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${BJC250} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/bjc250.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for CPCA driver
-	@${ECHO_MSG} ">>>   adding ${CPCA} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${CPCA} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/src/cpca_gdev.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for LIPS driver
-	@${ECHO_MSG} ">>>   adding ${LIPS} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${LIPS} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${LIPS_NAME}/gdevlips.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for DMPRT driver
-	@${ECHO_MSG} ">>>   adding ${DMPRT} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${DMPRT} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/src/gdevdmpr.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for EPAG driver
-	@${ECHO_MSG} ">>>   adding ${EPAG} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${EPAG} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/epag.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for EPLASER driver
-	@${ECHO_MSG} ">>>   adding ${EPLASER} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${EPLASER} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevescv6.mak \
 		>> ${WRKSRC}/src/contrib.mak
 	${CAT} ${WRKSRC}/${EPLASER_NAME}/gdevesmv6.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for MJC driver
-	@${ECHO_MSG} ">>>   adding ${MJC} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${MJC} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/${MJC_NAME}/gdevmjc.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for GDI driver
-	@${ECHO_MSG} ">>>   adding ${GDI} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${GDI} driver to contrib.mak ..."
 	${CAT} ${WRKSRC}/src/smartgdi-contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for LXM3200 driver
-	@${ECHO_MSG} ">>>   adding ${LXM3200} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${LXM3200} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/lxm3200.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for LX5000 driver
-	@${ECHO_MSG} ">>>   adding ${LX5000} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${LX5000} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/lx5000.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 # for LEX7000 driver
-	@${ECHO_MSG} ">>>   adding ${LEX7000} driver to contrib.mak ..."
+	${ECHO_MSG} ">>>   adding ${LEX7000} driver to contrib.mak ..."
 	${CAT} ${FILESDIR}/lex7000.contrib.mak \
 		>> ${WRKSRC}/src/contrib.mak
 
 post-configure:
-	@${ECHO_MSG} ">>> in post-configure ..."
+	${ECHO_MSG} ">>> in post-configure ..."
 # for Gimp-Print driver
-	@${ECHO_MSG} ">>>   running configure script for ${GPRINT} library ..."
+	${ECHO_MSG} ">>>   running configure script for ${GPRINT} library ..."
 	cd ${WRKSRC}/${GPRINT_NAME} ; \
 		${SETENV} ${MAKE_ENV} ${SH} ./configure \
 			--without-translated-ppds --with-ghost \
@@ -457,20 +457,20 @@ post-configure:
 			--prefix=${PREFIX}
 
 pre-build:
-	@${ECHO_MSG} ">>> in pre-build ..."
-	@${ECHO_MSG} ">>>   creating directories for compilation ..."
+	${ECHO_MSG} ">>> in pre-build ..."
+	${ECHO_MSG} ">>>   creating directories for compilation ..."
 	${MKDIR} ${WRKSRC}/obj
 	${MKDIR} ${WRKSRC}/bin
 # for HP2200 driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${HP2200} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${HP2200} ..."
 .for i in gdevcd8.c
 	${LN} -sf ${WRKSRC}/${HP2200}/${i} ${WRKSRC}/src
 .endfor
 # for Gimp-Print driver
-	@${ECHO_MSG} ">>>   building ${GPRINT} library ..."
+	${ECHO_MSG} ">>>   building ${GPRINT} library ..."
 	cd ${WRKSRC}/${GPRINT_NAME} ; \
 		${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
-	@${ECHO_MSG} ">>>   creating symlinks for ${GPRINT} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${GPRINT} ..."
 	${LN} -sf ${WRKSRC}/${GPRINT_NAME}/src/ghost/*.[ch] \
 		${WRKSRC}/src
 	${MKDIR} ${WRKSRC}/${GPRINT}
@@ -479,73 +479,73 @@ pre-build:
 	${LN} -sf ${WRKSRC}/${GPRINT_NAME}/src/main/.libs/libgimpprint.a \
 		${WRKSRC}/${GPRINT}/libgimpprint.a
 # for MD2K driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${MD2K} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${MD2K} ..."
 .for i in gdevmd2k.c
 	${LN} -sf ${WRKSRC}/${MD2K_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for ALPS driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${ALPS} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${ALPS} ..."
 .for i in gdevalps.c
 	${LN} -sf ${WRKSRC}/${ALPS_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for BJ10V driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${BJ10V} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${BJ10V} ..."
 .for i in gdev10v.c
 	${LN} -sf ${WRKSRC}/${BJ10V_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for BJC250 driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${BJC250} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${BJC250} ..."
 .for i in gdevbjc_.[ch] gdevbjca.c
 	${LN} -sf ${WRKSRC}/${BJC250_NAME}/src/${i} ${WRKSRC}/src
 .endfor
 # for LIPS driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${LIPS} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${LIPS} ..."
 .for i in gdevlips.[ch] gdevlprn.[ch] gdevl4r.c gdevl4v.c gdevespg.c \
 	gdevnpdl.c gdevrpdl.c
 	${LN} -sf ${WRKSRC}/${LIPS_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for EPAG driver
-	@${ECHO_MSG} ">>>   building ${EPAG} utility ..."
+	${ECHO_MSG} ">>>   building ${EPAG} utility ..."
 	cd ${WRKSRC}/${EPAG_NAME} ; \
 		${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} Makefile
-	@${ECHO_MSG} ">>>   creating symlinks for ${EPAG} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${EPAG} ..."
 .for i in gdevepag.c
 	${LN} -sf ${WRKSRC}/${EPAG_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for EPLASER driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${EPLASER} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${EPLASER} ..."
 .for i in gdevescv.[ch] gdevesmv.c
 	${LN} -sf ${WRKSRC}/${EPLASER_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for MJC driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${MJC} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${MJC} ..."
 .for i in gdevmjc.c mjbarrie.c mjbksep.c mjespdtc.c mjespdtm.c mjespdty.c \
 	mjgrnsp.c mjgrnsp2.c mjhtocmy.c mjmtx2.c mjvtbl.c
 	${LN} -sf ${WRKSRC}/${MJC_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for LXM3200 driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${LXM3200} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${LXM3200} ..."
 .for i in gdevlx32.c
 	${LN} -sf ${WRKSRC}/${LXM3200_NAME}/${i} ${WRKSRC}/src
 .endfor
 # for LEX7000 driver
-	@${ECHO_MSG} ">>>   creating symlinks for ${LEX7000} ..."
+	${ECHO_MSG} ">>>   creating symlinks for ${LEX7000} ..."
 .for i in gdevlx7.c
 	${LN} -sf ${WRKSRC}/${LEX7000}/src/${i} ${WRKSRC}/src
 .endfor
 
 pre-install:
-	@${ECHO_MSG} ">>> in pre-install ..."
-	@${ECHO_MSG} ">>>   creating ghostscript destdir ..."
+	${ECHO_MSG} ">>> in pre-install ..."
+	${ECHO_MSG} ">>>   creating ghostscript destdir ..."
 	${MKDIR} ${DATADIR}
-	@${ECHO_MSG} ">>>   extracting ghostscript fonts ..."
+	${ECHO_MSG} ">>>   extracting ghostscript fonts ..."
 	${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_STD}
 	${TAR} -C ${DATADIR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${GS_FONTS_OTHER}
 	${CHOWN} -R ${SHAREOWN}:${SHAREGRP} ${DATADIR}
 
 post-install:
-	@${ECHO_MSG} ">>> in post-install ..."
-	@${ECHO_MSG} ">>>   stripping gs ..."
+	${ECHO_MSG} ">>> in post-install ..."
+	${ECHO_MSG} ">>>   stripping gs ..."
 .if defined(WITH_SHLIB)
 	${STRIP_CMD} ${PREFIX}/bin/gsc ${PREFIX}/bin/gsx
 	${LN} -sf gsc ${PREFIX}/bin/gs
@@ -553,29 +553,29 @@ post-install:
 	${STRIP_CMD} ${PREFIX}/bin/gs
 .endif
 # for HPDJ driver
-	@${ECHO_MSG} ">>>   installing ${HPDJ} manpages ..."
+	${ECHO_MSG} ">>>   installing ${HPDJ} manpages ..."
 .for i in ${HPDJ_MAN1}
 	${INSTALL_MAN} ${WRKSRC}/src/${i} ${MANPREFIX}/man/man1
 .endfor
-	@${ECHO_MSG} ">>>   creating ${HPDJ} destdir ..."
+	${ECHO_MSG} ">>>   creating ${HPDJ} destdir ..."
 	${MKDIR} ${DATADIR}/${GS_VERSION}/${HPDJ}
-	@${ECHO_MSG} ">>>   installing files in ${HPDJ} destdir ..."
+	${ECHO_MSG} ">>>   installing files in ${HPDJ} destdir ..."
 .for i in README.hpdj example.mdf margins-A4.ps margins-A4Rotated.ps \
 	margins-Letter.ps margins-LetterRotated.ps
 	${INSTALL_DATA} ${WRKSRC}/src/${i} \
 		${DATADIR}/${GS_VERSION}/${HPDJ}
 .endfor
 # for PCL3 driver
-	@${ECHO_MSG} ">>>   installing ${PCL3} utility in bindir ..."
+	${ECHO_MSG} ">>>   installing ${PCL3} utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/bin/pcl3opts ${PREFIX}/bin
-	@${ECHO_MSG} ">>>   installing ${PCL3} manpages ..."
+	${ECHO_MSG} ">>>   installing ${PCL3} manpages ..."
 .for i in ${PCL3_MAN1}
 	${INSTALL_MAN} ${WRKSRC}/${PCL3_NAME}/doc/${i} ${MANPREFIX}/man/man1
 .endfor
 # other pcl3 stuff, which might be interesting for runtime
-	@${ECHO_MSG} ">>>   creating ${PCL3} destdir ..."
+	${ECHO_MSG} ">>>   creating ${PCL3} destdir ..."
 	${MKDIR} ${DATADIR}/${GS_VERSION}/${PCL3}
-	@${ECHO_MSG} ">>>   installing files in ${PCL3} destdir ..."
+	${ECHO_MSG} ">>>   installing files in ${PCL3} destdir ..."
 .for i in NEWS BUGS README lib/example.mcf lib/if-pcl3 ps/calign.ps \
 	ps/dumppdd.ps ps/levels-test.ps ps/margins-A4.ps \
 	ps/margins-A4Rotated.ps ps/margins-Env10Rotated.ps \
@@ -585,16 +585,16 @@ post-install:
 		${DATADIR}/${GS_VERSION}/${PCL3}
 .endfor
 # for DMPRT driver
-	@${ECHO_MSG} ">>>   installing ${DMPRT} resources ..."
+	${ECHO_MSG} ">>>   installing ${DMPRT} resources ..."
 .for i in dmp_init.ps dmp_site.ps escp_24.src
 	${INSTALL_DATA} ${WRKSRC}/src/${i} \
 		${DATADIR}/${GS_VERSION}/lib
 .endfor
 # for EPAG driver
-	@${ECHO_MSG} ">>>   installing ${EPAG} utility in bindir ..."
+	${ECHO_MSG} ">>>   installing ${EPAG} utility in bindir ..."
 	${INSTALL_PROGRAM} ${WRKSRC}/${EPAG_NAME}/ert ${PREFIX}/bin
 # contributed UPP driver
-	@${ECHO_MSG} ">>> installing contributed UPP profiles ..."
+	${ECHO_MSG} ">>> installing contributed UPP profiles ..."
 .for i in ${CONTRIB_UPP}
 	${INSTALL_DATA} ${FILESDIR}/${i} \
 		${DATADIR}/${GS_VERSION}/lib
@@ -603,59 +603,59 @@ post-install:
 # now NOPORTDOCS dependend stuff
 #
 .if !defined(NOPORTDOCS)
-	@${ECHO_MSG} ">>> installing PORTDOC stuff ..."
+	${ECHO_MSG} ">>> installing PORTDOC stuff ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}
 # for HPDJ driver
-	@${ECHO_MSG} ">>>   installing ${HPDJ} docs ..."
+	${ECHO_MSG} ">>>   installing ${HPDJ} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${HPDJ}
 .for i in NEWS hpdj.html
 	${INSTALL_DATA} ${WRKSRC}/src/${i} \
 		${DOCSDIR}/${GS_VERSION}/${HPDJ}
 .endfor
 # for PCL3 driver
-	@${ECHO_MSG} ">>>   installing ${PCL3} docs ..."
+	${ECHO_MSG} ">>>   installing ${PCL3} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${PCL3}
 .for i in NEWS doc/gs-pcl3.html doc/how-to-report.txt doc/pcl3opts.html
 	${INSTALL_DATA} ${WRKSRC}/${PCL3_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${PCL3}
 .endfor
 # for MD2K driver
-	@${ECHO_MSG} ">>>   installing ${MD2K} docs ..."
+	${ECHO_MSG} ">>>   installing ${MD2K} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MD2K}
 .for i in README.jis
 	${INSTALL_DATA} ${WRKSRC}/${MD2K_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${MD2K}
 .endfor
 # for ALPS driver
-	@${ECHO_MSG} ">>>   installing ${ALPS} docs ..."
+	${ECHO_MSG} ">>>   installing ${ALPS} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${ALPS}
 .for i in README.gdevalps
 	${INSTALL_DATA} ${WRKSRC}/${ALPS_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${ALPS}
 .endfor
 # for BJ10V driver
-	@${ECHO_MSG} ">>>   installing ${BJ10V} docs ..."
+	${ECHO_MSG} ">>>   installing ${BJ10V} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${BJ10V}
 .for i in gdev10v.jis
 	${INSTALL_DATA} ${WRKSRC}/${BJ10V_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${BJ10V}
 .endfor
 # for LIPS driver
-	@${ECHO_MSG} ">>>   installing ${LIPS} docs ..."
+	${ECHO_MSG} ">>>   installing ${LIPS} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LIPS}
 .for i in Gdevlips.htm
 	${INSTALL_DATA} ${WRKSRC}/${LIPS_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${LIPS}
 .endfor
 # for DMPRT driver
-	@${ECHO_MSG} ">>>   installing ${DMPRT} docs ..."
+	${ECHO_MSG} ">>>   installing ${DMPRT} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${DMPRT}
 .for i in gdevdmpr.sj
 	${INSTALL_DATA} ${WRKSRC}/src/${i} \
 		${DOCSDIR}/${GS_VERSION}/${DMPRT}
 .endfor
 # for EPAG driver
-	@${ECHO_MSG} ">>>   installing ${EPAG} docs ..."
+	${ECHO_MSG} ">>>   installing ${EPAG} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPAG}
 .for i in ert.txt gdevepag.txt ChangeLog
 	${INSTALL_DATA} ${WRKSRC}/${EPAG_NAME}/${i} \
@@ -666,35 +666,35 @@ post-install:
 		${DOCSDIR}/${GS_VERSION}/${EPAG}
 .endfor
 # for EPLASER driver
-	@${ECHO_MSG} ">>>   installing ${EPLASER} docs ..."
+	${ECHO_MSG} ">>>   installing ${EPLASER} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${EPLASER}
 .for i in readme-eplaser-652.euc readme-eplaser-652-jp.euc
 	${INSTALL_DATA} ${WRKSRC}/${EPLASER_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${EPLASER}
 .endfor
 # for MJC driver
-	@${ECHO_MSG} ">>>   installing ${MJC} docs ..."
+	${ECHO_MSG} ">>>   installing ${MJC} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${MJC}
 .for i in MJ700V2C.FAQ README.mjc README.mje README.noz cpem.doc
 	${INSTALL_DATA} ${WRKSRC}/${MJC_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${MJC}
 .endfor
 # for GDI driver
-	@${ECHO_MSG} ">>>   installing ${GDI} docs ..."
+	${ECHO_MSG} ">>>   installing ${GDI} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${GDI}
 .for i in README
 	${INSTALL_DATA} ${WRKSRC}/src/${i} \
 		${DOCSDIR}/${GS_VERSION}/${GDI}
 .endfor
 # for LXM3200 driver
-	@${ECHO_MSG} ">>>   installing ${LXM3200} docs ..."
+	${ECHO_MSG} ">>>   installing ${LXM3200} docs ..."
 	${MKDIR} ${DOCSDIR}/${GS_VERSION}/${LXM3200}
 .for i in README RELEASE_NOTES Z12-Z31-QuickSetup
 	${INSTALL_DATA} ${WRKSRC}/${LXM3200_NAME}/${i} \
 		${DOCSDIR}/${GS_VERSION}/${LXM3200}
 .endfor
 .endif
-	@${ECHO_MSG} "> post-installation tasks completed."
+	${ECHO_MSG} "> post-installation tasks completed."
 
 .include "Makefile.inc"
 .include <bsd.port.post.mk>
diff --git a/print/ghostscript7/distinfo b/print/ghostscript7/distinfo
index 2412c9cb447d..4db3688dd567 100644
--- a/print/ghostscript7/distinfo
+++ b/print/ghostscript7/distinfo
@@ -16,7 +16,7 @@ MD5 (ghostscript/dmprt-2.01.tar.gz) = c7a9fb127fde5d888a798bf5e1822b88
 MD5 (ghostscript/epag-3.09.tar.gz) = 63304a6afe44842124d2d880bf24dbe3
 MD5 (ghostscript/eplaser-3.0.6-652.tgz) = a575b9f3424d0a9ab6fbb5619429a8fd
 MD5 (ghostscript/gdevmjc-0.8.tar.gz) = 228f41c3cccce22c8f477c7a9407527c
-MD5 (ghostscript/Samsung-SmartGDI-all-GS.tar.gz) = e6963f6c9460a964fe57d38479bbdd41
+MD5 (ghostscript/Samsung-SmartGDI-all-GS.orig.tar.gz) = 61decc4e00a64271948cbb581876352b
 MD5 (ghostscript/lxm3200-tweaked-20030501.tar.gz) = 0f88082030c6eb66a95804a6cc9b9e6b
 MD5 (ghostscript/gdevlx50.c) = 081e355c866316a56fbbff5b59f2b7cf
 MD5 (ghostscript/gs6.0.lexmark7000.patch) = fd5018c18351bf64805fe5727be196de
diff --git a/print/ghostscript7/files/patch-src:gdevgdi.c b/print/ghostscript7/files/patch-src:gdevgdi.c
new file mode 100644
index 000000000000..996758e09685
--- /dev/null
+++ b/print/ghostscript7/files/patch-src:gdevgdi.c
@@ -0,0 +1,983 @@
+--- src/gdevgdi.c.orig	Wed Jun 19 19:32:49 2002
++++ src/gdevgdi.c	Mon Jul 21 13:44:41 2003
+@@ -60,8 +60,8 @@
+ #define GDI_REPEAT_LENGTH 2
+ #define GDI_BAND_HEIGHT   128
+ #define GDI_MAX_BAND      66
+-//#define GDI_BAND_WIDTH    4928
+-//#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4)
++/*#define GDI_BAND_WIDTH    4928*/
++/*#define GDI_BAND_WIDTH_BYTES (((GDI_BAND_WIDTH + 31)/32)*4)*/
+ 
+ #define GDI_PRE_COMP      2
+ #define GDI_REAL_COMP     0
+@@ -74,8 +74,8 @@
+ 
+ #define GDI_MARGINS_A4	        0.167, 0.167, 0.167, 0.167
+ #define GDI_MARGINS_LETTER	0.167, 0.167, 0.167, 0.167
+-//#define GDI_MARGINS_A4	0.0, 0.0, 0.0, 0.0
+-//#define GDI_MARGINS_LETTER	0.0, 0.0, 0.0, 0.0
++/*#define GDI_MARGINS_A4	0.0, 0.0, 0.0, 0.0*/
++/*#define GDI_MARGINS_LETTER	0.0, 0.0, 0.0, 0.0*/
+ 
+ /* The number of blank lines that make it worthwhile to reposition */
+ /* the cursor. */
+@@ -86,9 +86,15 @@
+ 
+ int GDI_BAND_WIDTH[] = {4768, 4928};
+ 
++#if GS_VERSION_MAJOR >= 8
++private int gdi_print_page(gx_device_printer *pdev, FILE *prn_stream);
++private int gdi_open(gx_device *pdev);
++private int gdi_close(gx_device *pdev);
++#else
+ private int gdi_print_page(P2(gx_device_printer *pdev, FILE *prn_stream));
+ private int gdi_open(P1(gx_device *pdev));
+ private int gdi_close(P1(gx_device *pdev));
++#endif
+ 
+ /* The device descriptors */
+ private dev_proc_open_device(gdi_open);
+@@ -107,6 +113,14 @@
+ 	1,                      /* color bit */ 
+         gdi_print_page);
+ 
++gx_device_printer far_data gs_samsunggdi_device =
++  prn_device(prn_gdi_procs, "samsunggdi",
++	DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS, /* paper size (unit : 10/72 inch size) */
++	X_DPI2, Y_DPI2,
++	0.20, 0.25, 0.25, 0.25,		/* margins filled in by gdi_open */
++	1,                      /* color bit */ 
++        gdi_print_page);
++
+ private FILE *WritePJLHeaderData(gx_device_printer *pdev, FILE *fp);
+ private FILE *WriteBandHeader(FILE *fp, unsigned int usBandNo, 
+                      unsigned char ubCompMode, unsigned int usBandWidth, 
+@@ -220,7 +234,7 @@
+             memset(obp, 0x00, ul_band_size*13/10);
+             for (j=0; j<band_height; j++) {
+                 memset(tmp, 0x00, raster);
+-                //code = gdev_prn_copy_scan_lines(pdev, i*band_height+j, 
++                /*code = gdev_prn_copy_scan_lines(pdev, i*band_height+j, */
+ 		if (y == num_rows) break;
+                 code = gdev_prn_copy_scan_lines(pdev, y++, 
+                                  (byte*)tmp, raster);
+@@ -232,15 +246,71 @@
+ 
+             /* Write Band Data 
+ 	       Because of Scanline compression, extract Scanline compression mode */
+-            //ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);
+-            //ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);
+-	    //ul_min_size =  (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size;
++            /*ul_tiff_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/
++            /*ul_scan_size = (unsigned long)bmp2run(obp, ibp, band_height, band_width_bytes, GDI_PRE_COMP);*/
++	    /*ul_min_size =  (ul_scan_size > ul_tiff_size) ? ul_tiff_size : ul_scan_size;*/
+ 	    ul_min_size = ul_tiff_size;
+ 	    compression_type = GDI_COMP_MODITIFF;
+-	    //compression_type =  (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE;
++	    /*compression_type =  (ul_scan_size > ul_tiff_size) ? GDI_COMP_MODITIFF : GDI_COMP_SCANLINE;*/
+             switch (compression_type) {
+ 	    case GDI_COMP_MODITIFF:
++#define FUDGE_BIG_BANDS
++#ifndef FUDGE_BIG_BANDS
+                 ul_comp_size = FrameTiffComp(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP);
++#else
++	      {
++		/* Very ugly.  The printer will hose if the compressed
++                   band size is over 65536, so we "fudge" the data in
++                   this case repeatedly until we get what we want. 
++
++		   The fudge algorithm is simple, this is kinda-sorta
++		   RLE, so we just round groups of bits in groups of
++		   2, then 3, then 4, etc until the thing works.  */
++#define MAXBAND 0xffff
++#define ASSERT(x)
++		int fudge=0;
++		byte *use_band=ibp;
++		do {
++		  ul_comp_size = FrameTiffComp(obp, use_band, 
++					       band_height, band_width_bytes, 
++					       GDI_REAL_COMP);
++		  if (ul_comp_size > MAXBAND-8) {
++		    int f, g, h;
++		    if (!fudge) {
++		      ASSERT(use_band == ibp);
++		      use_band = (byte*)gs_malloc(ul_band_size, 1, "gdi_print_page/fudge");
++		      fudge=1;
++		    }
++		    memcpy(use_band, ibp, ul_band_size);
++		    fudge++;
++		    ASSERT(fudge>=2);
++		    {
++#define FUDGE2(x) ( (((((x)>>6)&0x3)?3:0)<<6)	\
++		    | (((((x)>>4)&0x3)?3:0)<<4)	\
++		    | (((((x)>>2)&0x3)?3:0)<<2)	\
++		    | (((((x)>>0)&0x3)?3:0)) )
++#define FUDGE4(x) ( (((((x)>>4)&0xf)?0xf:0)<<4)	\
++		    | (((((x)>>0)&0xf)?0xf:0)) )
++#define FUDGE8(x) ( (((((x)>>0)&0xff)?0xf:0)) )
++#define FUDGE(fudge, x) ( (fudge == 2 ? FUDGE2(x) 	\
++			   : fudge == 3 ? FUDGE4(x)	\
++			   : fudge == 4 ? FUDGE8(x)	\
++			   : 0 ) )
++
++		      for(f=0;f<ul_band_size; f++) {
++			use_band[f] = FUDGE(fudge, ibp[f]);
++		      }
++		    }
++		  }
++		} while (ul_comp_size > MAXBAND-8);
++	      oh_well:
++		if (fudge > 1) {
++		  ASSERT(use_band != ibp);
++		  gs_free(use_band, ul_band_size, 1, "gdi_print_page/fudge");
++		  /*fprintf(stderr, "smartgdi: band %d fudge factor is %d\n", i, fudge);*/
++		}
++	      }
++#endif
+ 		break;
+ 	    case GDI_COMP_SCANLINE:
+                 ul_comp_size = bmp2run(obp, ibp, band_height, band_width_bytes, GDI_REAL_COMP);
+@@ -253,7 +323,7 @@
+ 
+             prn_stream = WriteBandHeader(prn_stream, i, compression_type, (band_width_bytes * 8),
+                                          band_height, ul_comp_size); 
+-            //fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size);
++            /*fprintf(prn_stream, "[%d] band, size : %d\n", i, ul_tiff_size);*/
+             fwrite(obp, ul_comp_size, 1, prn_stream);
+         }
+     
+@@ -271,50 +341,50 @@
+   unsigned char buffer[300];
+   int dots_per_inch = (int)pdev->y_pixels_per_inch;
+ 
+-  strcpy(buffer, "\x1b%-12345X");
++  strcpy(buffer, "\033%-12345X");
+   
+-  // Paper Type
+-  strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\x0d\x0a");
+-  //Density
+-  strcat(buffer, "@PJL SET DENSITY = 1\x0d\x0a");
+-  // Toner Save
+-  strcat(buffer, "@PJL SET TONERSAVE = OFF\x0d\x0a");
+-  // Enter Language SMART
+-  strcat(buffer, "@PJL ENTER LANGUAGE = SMART\x0d\x0a");
+-  // JobStart
+-  strcat(buffer, "$PJL JOB START\x0d\x0a");
++  /* Paper Type*/
++  strcat(buffer, "@PJL SET PAPERTYPE = NORMAL ON\015\012");
++  /*Density*/
++  strcat(buffer, "@PJL SET DENSITY = 1\015\012");
++  /* Toner Save*/
++  strcat(buffer, "@PJL SET TONERSAVE = OFF\015\012");
++  /* Enter Language SMART*/
++  strcat(buffer, "@PJL ENTER LANGUAGE = SMART\015\012");
++  /* JobStart*/
++  strcat(buffer, "$PJL JOB START\015\012");
+ 
+-  // Resolution
++  /* Resolution*/
+   if (dots_per_inch == 600)
+-      strcat(buffer, "$PJL RESOLUTION = 600\x0d\x0a");
++      strcat(buffer, "$PJL RESOLUTION = 600\015\012");
+   else
+-      strcat(buffer, "$PJL RESOLUTION = 300\x0d\x0a");
++      strcat(buffer, "$PJL RESOLUTION = 300\015\012");
+ 
+-  // Copies
+-  strcat(buffer, "$PJL COPIES = 1\x0d\x0a");
+-  // Paper Size
++  /* Copies*/
++  strcat(buffer, "$PJL COPIES = 1\015\012");
++  /* Paper Size*/
+   switch (gdev_pcl_paper_size((gx_device*)pdev)) 
+   {
+ 	case PAPER_SIZE_A4:
+-  			strcat(buffer, "$PJL PAGE A4 AUTO\x0d\x0a");
++  			strcat(buffer, "$PJL PAGE A4 AUTO\015\012");
+ 			break;
+ 	case PAPER_SIZE_LETTER:
+-  			strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a");
++  			strcat(buffer, "$PJL PAGE LETTER AUTO\015\012");
+ 			break;
+ 	case PAPER_SIZE_LEGAL:
+-  			strcat(buffer, "$PJL PAGE LEGAL AUTO\x0d\x0a");
++  			strcat(buffer, "$PJL PAGE LEGAL AUTO\015\012");
+ 			break;
+ 	default:
+-  			strcat(buffer, "$PJL PAGE LETTER AUTO\x0d\x0a");
++  			strcat(buffer, "$PJL PAGE LETTER AUTO\015\012");
+ 			break;
+   }
+-  // bitmap start
+-  strcat(buffer, "$PJL BITMAP START\x0d\x0a");
+-  // write buffer to file.
++  /* bitmap start*/
++  strcat(buffer, "$PJL BITMAP START\015\012");
++  /* write buffer to file.*/
+   ulSize = strlen(buffer);
+   fwrite(buffer, 1, ulSize, fp );
+   return(fp);
+-} // WritePJLHeaderData()     
++} /* WritePJLHeaderData()     */
+ 
+ 
+ FILE *WriteBandHeader
+@@ -335,33 +405,33 @@
+ 
+   ulBandSize += 8;
+ 
+-  // bandsize
++  /* bandsize*/
+   buf[i++] = (unsigned char)((ulBandSize >> 24) & 0xff);
+   buf[i++] = (unsigned char)((ulBandSize >> 16) & 0xff);
+   buf[i++] = (unsigned char)((ulBandSize >> 8) & 0xff);
+   buf[i++] = (unsigned char)(ulBandSize & 0xff);
+   
+-  // id                            
++  /* id        */                    
+   buf[i++] = (unsigned char)((usBandNo >> 8) & 0xff);
+   buf[i++] = (unsigned char)(usBandNo & 0xff);
+ 
+-  // compress mode         
++  /* compress mode         */
+   buf[i++] = (unsigned char)(ubCompMode & 0xff);
+ 
+-  // ubLeft                  
++  /* ubLeft                  */
+   buf[i++] = (unsigned char)(ubLeft & 0xff);
+ 
+-  // height
++  /* height*/
+   buf[i++] = (unsigned char)((usBandHeight >> 8) & 0xff);
+   buf[i++] = (unsigned char)(usBandHeight & 0xff);
+ 
+-  // width                     
++  /* width   */                  
+   buf[i++] = (unsigned char)((usBandWidth >> 8) & 0xff);
+   buf[i++] = (unsigned char)(usBandWidth & 0xff);
+ 
+   fwrite(buf, 1, i, fp);
+   return(fp);
+-} // end of WriteBandHeader()
++} /* end of WriteBandHeader()*/
+ 
+ FILE *WriteTrailerData(FILE *fp)
+ {
+@@ -369,18 +439,18 @@
+   unsigned long buffer[200];
+ 
+   memset((char*)buffer, 0x00, 200);
+-  strcpy((char*)buffer, "$PJL PRINT 4\x0d\x0a");
+-  strcat((char*)buffer, "$PJL EOJ\x0d\x0a");
+-  strcat((char*)buffer, "$PJL SYNC\x0d\x0a");
+-  strcat((char*)buffer, "$PJL RELEASE 0 2047\x0d\x0a");
+-  strcat((char*)buffer, "$PJL GARBAGE\x0d\x0a");
+-  strcat((char*)buffer, "\x1b%-12345X\x0d\x0a");
++  strcpy((char*)buffer, "$PJL PRINT 4\015\012");
++  strcat((char*)buffer, "$PJL EOJ\015\012");
++  strcat((char*)buffer, "$PJL SYNC\015\012");
++  strcat((char*)buffer, "$PJL RELEASE 0 2047\015\012");
++  strcat((char*)buffer, "$PJL GARBAGE\015\012");
++  strcat((char*)buffer, "\033%-12345X\015\012");
+ 
+   ulSize = strlen((char*)buffer);
+   fwrite(buffer, 1, ulSize, fp);
+ 
+   return(fp);
+-} // WriteTrailerData()
++} /* WriteTrailerData()*/
+ 
+ unsigned long FrameTiffComp(unsigned char *pubDest, 
+                             unsigned char *pubSrc, 
+@@ -399,7 +469,7 @@
+ 
+   for (i = 0; i < usTotalLines; i++)
+   {
+-    if (!(ubMode & 0x02)) //
++    if (!(ubMode & 0x02))
+     {
+       usLineSize = FrameTiff_Comp(SrcPtr, TgtPtr, usBytesPerLine);
+     }
+@@ -416,7 +486,7 @@
+     ulret += usLineSize;
+   }
+ 
+-  if (!(ubMode & 0x02)) //
++  if (!(ubMode & 0x02))
+   {
+     switch (ulret%4)
+     {
+@@ -448,7 +518,7 @@
+     }
+   }
+   return(ulret);
+-}  // FrameTiffComp()
++}  /* FrameTiffComp()*/
+ 
+ unsigned int FrameTiff_Comp(unsigned char *lpSrcBuf, unsigned char *lpTgtBuf, unsigned int nSrcBytes)
+ {
+@@ -528,13 +598,13 @@
+           usEndCnt = 16384;
+         }
+         usEndCnt = usCount - 2;
+-        // usEndCnt = usCount - 2; original
+-        // 19990824 by LSM : for end file while (usEndCnt--)
++        /* usEndCnt = usCount - 2; original*/
++        /* 19990824 by LSM : for end file while (usEndCnt--)*/
+         while (usEndCnt--)
+         {
+           /* read next data */
+           ubFirst = ubSecond;
+-          ubSecond = *pubSrc++; // read 3rd Data
++          ubSecond = *pubSrc++; /* read 3rd Data*/
+           if (ubFirst == ubSecond)
+           {
+             if (usEndCnt <= 1)
+@@ -544,7 +614,7 @@
+             }
+             else
+             {
+-              ubSecond = *pubSrc++; // read 4th Data
++              ubSecond = *pubSrc++; /* read 4th Data*/
+               usEndCnt--;
+               if (ubFirst == ubSecond)
+               {
+@@ -660,14 +730,14 @@
+         {
+           usEndCnt = 16384;
+         }
+-        // usEndCnt = usCount - 2;
++        /* usEndCnt = usCount - 2;*/
+         usEndCnt = usCount - 2;
+-        // 19990824 by LSM : for Last file while (usEndCnt--)
++        /* 19990824 by LSM : for Last file while (usEndCnt--)*/
+         while (usEndCnt--)
+         {
+           /* read next data */
+           ubFirst = ubSecond;
+-          ubSecond = *pubSrc++; // read 3rd Data
++          ubSecond = *pubSrc++; /* read 3rd Data*/
+           if (ubFirst == ubSecond)
+           {
+             if (usEndCnt <= 1)
+@@ -677,8 +747,8 @@
+             }
+             else
+             {
+-              ubSecond = *pubSrc++; // read 4th Data
+-              usEndCnt--; // 19990824 by LSM
++              ubSecond = *pubSrc++; /* read 4th Data*/
++              usEndCnt--; /* 19990824 by LSM*/
+               if (ubFirst == ubSecond)
+               {
+                 ubMisCnt = 3;
+@@ -691,7 +761,7 @@
+       /* save data */
+       usControl = (unsigned int) (pubSrc - pubOrg);
+       usControl -= ubMisCnt;
+-      // 19990824 by LSM : for fixing GPF on Photoshop
++      /* 19990824 by LSM : for fixing GPF on Photoshop*/
+       if (usControl > usCount)
+       {
+         usControl = usCount;
+@@ -728,77 +798,77 @@
+ }   sc_tbl;
+ 
+ static sc_tbl  gdi_ScanTbl[256] = {
+-{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 },   // 0x00
++{ 8, 0, 0 }, { 7, 1, 1 }, { 6, 1, 0 }, { 6, 2, 1 },   /* 0x00*/
+ { 5, 1, 0 }, { 0, 0, 1 }, { 5, 2, 0 }, { 5, 3, 1 }, 
+ { 4, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 4, 2, 0 }, { 0, 0, 1 }, { 4, 3, 0 }, { 4, 4, 1 }, 
+-{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x10
++{ 3, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x10*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 3, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 3, 3, 0 }, { 0, 0, 1 }, { 3, 4, 0 }, { 3, 5, 1 }, 
+-{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x20
++{ 2, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x20*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x30
++{ 2, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x30*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 2, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 2, 4, 0 }, { 0, 0, 1 }, { 2, 5, 0 }, { 2, 6, 1 }, 
+-{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x40
++{ 1, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x40*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x50
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x50*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x60
++{ 1, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x60*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x70
++{ 1, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x70*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 1, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 1, 5, 0 }, { 0, 0, 1 }, { 1, 6, 0 }, { 1, 7, 1 }, 
+-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x80
++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x80*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x90
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x90*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xa0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xa0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xb0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xb0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xc0
++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xc0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xd0
++{ 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xd0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xe0
++{ 0, 3, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xe0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+-{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0xf0
++{ 0, 4, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0xf0*/
+ { 0, 0, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 5, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 }, 
+ { 0, 6, 0 }, { 0, 0, 1 }, { 0, 7, 0 }, { 0, 8, 1 }, 
+ };
+ 
+ static sc_tbl  gdi_ScanTbl4[16] = {
+-{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 },   // 0x00
+-{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 },   // 0x04
+-{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   // 0x08
+-{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 }    // 0x0c
++{ 4, 0, 0 }, { 3, 1, 1 }, { 2, 1, 0 }, { 2, 2, 1 },   /* 0x00*/
++{ 1, 1, 0 }, { 0, 0, 1 }, { 1, 2, 0 }, { 1, 3, 1 },   /* 0x04*/
++{ 0, 1, 0 }, { 0, 0, 1 }, { 0, 0, 0 }, { 0, 0, 1 },   /* 0x08*/
++{ 0, 2, 0 }, { 0, 0, 1 }, { 0, 3, 0 }, { 0, 4, 1 }    /* 0x0c*/
+ };
+ 
+ long SaveScanData( unsigned char *, unsigned short, unsigned short, unsigned short, unsigned short, unsigned short );
+@@ -816,32 +886,32 @@
+   lWarp = (long)(usWarp << 3);
+   lDis  = ((long)usDy * lWarp) + (long)sDx;
+ 
+-  // 1st, 2nd, 3rd & 4th byte
+-  ultmp_dat = 0xc0000000;
++  /* 1st, 2nd, 3rd & 4th byte*/
++  ultmp_dat = 0xc0000000ul;
+   if (lDis < 0)
+   {
+-    ultmp_dat |= 0x20000000;
++    ultmp_dat |= 0x20000000ul;
+   }
+-  ultmp_dat |= (lDis & 0x1fffffff);
+-  *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000) >> 24);
+-  *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000) >> 16);
+-  *out_buf++ = (unsigned char)((ultmp_dat & 0xff00) >> 8);
+-  *out_buf++ = (unsigned char)(ultmp_dat & 0xff);
++  ultmp_dat |= (lDis & 0x1ffffffful);
++  *out_buf++ = (unsigned char)((ultmp_dat & 0xff000000ul) >> 24);
++  *out_buf++ = (unsigned char)((ultmp_dat & 0xff0000ul) >> 16);
++  *out_buf++ = (unsigned char)((ultmp_dat & 0xff00ul) >> 8);
++  *out_buf++ = (unsigned char)(ultmp_dat & 0xfful);
+ 
+-  // 5th & 6th byte
++  /* 5th & 6th byte*/
+   ustmp_dat = 0xc000;
+   ustmp_dat |= (usRl & 0x3fff);
+   *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8);
+   *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+ 
+   return(6);
+-} // Save6Bytes()
++} /* Save6Bytes()*/
+ 
+ long  Save4Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx)
+ {
+   unsigned short  ustmp_dat;
+ 
+-  // 1st & 2nd byte
++  /* 1st & 2nd byte*/
+   ustmp_dat = 0x8000;
+   if (sDx < 0)
+   {
+@@ -851,7 +921,7 @@
+   *out_buf++ = (unsigned char)((ustmp_dat & 0xff00) >> 8);
+   *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+ 
+-  // 3rd & 4th byte
++  /* 3rd & 4th byte*/
+   ustmp_dat = 0x8000;
+   ustmp_dat |= ((usDy & 0x03) << 12);
+   ustmp_dat |= (usRl & 0xfff);
+@@ -859,13 +929,13 @@
+   *out_buf++ = (unsigned char)(ustmp_dat & 0xff);
+ 
+   return(4);
+-}   // end of Save4Bytes()
++}   /* end of Save4Bytes()*/
+ 
+ long  Save2Bytes(unsigned char *out_buf, unsigned short usDy, unsigned short usRl, short sDx)
+ {
+   unsigned char ubtmp_dat;
+ 
+-  // 1st byte
++  /* 1st byte*/
+   ubtmp_dat = 0x00;
+   if (usDy == 1)
+   {
+@@ -874,7 +944,7 @@
+   ubtmp_dat |= (usRl & 0x3f);
+   *out_buf++ = ubtmp_dat;
+ 
+-  // 2nd byte
++  /* 2nd byte*/
+   if (sDx < 0)
+   {
+     ubtmp_dat = 0x80;
+@@ -886,7 +956,7 @@
+   ubtmp_dat |= ((unsigned char)sDx & 0x7f);
+   *out_buf++ = ubtmp_dat;
+   return(2);
+-}   // end of Save2Bytes()
++}   /* end of Save2Bytes()*/
+ 
+ long SaveScanData (unsigned char *out_buf, 
+                    unsigned short us1Cnt, 
+@@ -900,26 +970,26 @@
+ 
+   sDisX = (int)usPosX01 - (int)usPosX10;
+ 
+-  // 48 bit
++  /* 48 bit*/
+   if ( (usDy > 3) || (us1Cnt > 4095) ) 
+   {
+     Save6Bytes(out_buf, usDy, us1Cnt, sDisX, usWarp);
+     lRet = 6;
+   }
+-  // 32 bit
++  /* 32 bit*/
+   else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) ) 
+   {
+     Save4Bytes(out_buf, usDy, us1Cnt, sDisX);
+     lRet = 4;
+   }
+-  // 16 bit
++  /* 16 bit*/
+   else 
+   {
+     Save2Bytes(out_buf, usDy, us1Cnt, sDisX);
+     lRet = 2;
+   }
+   return(lRet);
+-} // end of SaveScanData()
++} /* end of SaveScanData()*/
+ 
+ 
+ long UpdateScanSize (unsigned char *out_buf, 
+@@ -934,23 +1004,23 @@
+ 
+   sDisX = usPosX01 - usPosX10;
+ 
+-  // 48 bit
++  /* 48 bit*/
+   if ( (usDy > 3) || (us1Cnt > 4095) ) 
+   {
+     lRet = 6;
+   }
+-  // 32 bit
++  /* 32 bit*/
+   else if ( (usDy > 1) || (us1Cnt > 63) || (sDisX > 127) || (sDisX < -128) )
+   {
+     lRet = 4;
+   }
+-  // 16 bit
++  /* 16 bit*/
+   else
+   {
+     lRet = 2;
+   }
+   return(lRet);
+-} // end of UpdateScanSize() by bglee 19981224
++} /* end of UpdateScanSize() by bglee 19981224*/
+ 
+ long GetSimpleScan(unsigned char *out_buf,
+                    unsigned char ubSizeMode, 
+@@ -983,10 +1053,10 @@
+   }
+ 
+   
+-  // 1 X 1 X
++  /* 1 X 1 X*/
+   if (ubPreBit) 
+   {
+-    // 1 0 1 X
++    /* 1 0 1 X*/
+     if (ubDx) 
+     {
+       lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -994,23 +1064,23 @@
+       *usPosX01 = usBytePos + ubDx;
+       *us1Count = ubRl;
+       *usDy = 0;
+-      // 1 0 1 0
++      /* 1 0 1 0*/
+       if (!ubLastBit) 
+       {
+-        // 19990330 by bglee
++        /* 19990330 by bglee*/
+         out_buf = out_buf + lScanSize;
+         
+         lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+         *usPosX10 = *usPosX01 ;
+         *us1Count = 0;
+       }
+-      // 1 0 1 1
++      /* 1 0 1 1*/
+     }
+-    // 1 1 1 X
++    /* 1 1 1 X*/
+     else 
+     {
+       *us1Count += ubRl;
+-      // 1 1 1 0
++      /* 1 1 1 0*/
+       if (!ubLastBit) 
+       {
+         lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -1018,16 +1088,16 @@
+         *us1Count = 0;
+         *usDy = 0;
+       }
+-      // 1 1 1 1
++      /* 1 1 1 1*/
+     }
+   }
+-  // 0 X 1 X
++  /* 0 X 1 X*/
+   else 
+   {
+-    // 0 X 1 X
++    /* 0 X 1 X*/
+     *usPosX01 = usBytePos + ubDx;
+     *us1Count += ubRl;
+-    // 0 X 1 0
++    /* 0 X 1 0*/
+     if (!ubLastBit) 
+     {
+       lScanSize += (*UpdateScanLine[ubSizeMode])(out_buf, *us1Count, *usDy, *usPosX10, *usPosX01, usWidth);
+@@ -1035,11 +1105,11 @@
+       *us1Count = 0;
+       *usDy = 0;
+     }
+-    // 0 X 1 1
++    /* 0 X 1 1*/
+   }
+ 
+   return(lScanSize);
+-} // end of GetSimpleScan() 
++} /* end of GetSimpleScan() */
+ 
+ 
+ long scan_map (unsigned char *in_buf, 
+@@ -1049,7 +1119,7 @@
+                unsigned char ubMode) 
+ {
+   unsigned int  i, j, k;
+-  unsigned char ubPreBit, ubCrtByte;//, ubLastBit;
++  unsigned char ubPreBit, ubCrtByte;/*, ubLastBit;*/
+   long  lScanSize, lTmp;
+   long lCrtSize;
+   unsigned short  us1Count;
+@@ -1078,7 +1148,7 @@
+       switch (ubCrtByte) 
+       {
+         case 0x00:
+-          // 1 0
++          /* 1 0 */
+           if (ubPreBit) 
+           {
+             lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1088,16 +1158,16 @@
+             us1Count = 0;
+             usDy = 0;
+           }
+-          // 0 0
++          /* 0 0*/
+           break;
+ 
+         case 0xff:
+-          // 1 1
++          /* 1 1*/
+           if (ubPreBit)
+           {
+             us1Count += 8;
+           }
+-          // 0 1
++          /* 0 1*/
+           else 
+           {
+             us1Count = 8;
+@@ -1106,7 +1176,7 @@
+           break;
+ 
+         default:
+-          // X X 1 X
++          /* X X 1 X*/
+           if (gdi_ScanTbl[ubCrtByte].ubRl) 
+           {
+             usBytePos = (j << 3);
+@@ -1114,7 +1184,7 @@
+             out_buf = out_buf + lTmp;
+             lScanSize += lTmp;
+           }
+-          // complex pattern
++          /* complex pattern*/
+           else 
+           {
+             for (k = 0; k < 2; k++) 
+@@ -1124,7 +1194,7 @@
+               switch (ubTemp) 
+               {
+                 case 0x00:
+-                  // 1 0
++                  /* 1 0*/
+                   if (ubPreBit) 
+                   {
+                     lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1134,16 +1204,16 @@
+                     us1Count = 0;
+                     usDy = 0;
+                   }
+-                  // 0 0
++                  /* 0 0*/
+                   break;
+ 
+                 case 0x0f:
+-                  // 1 1
++                  /* 1 1*/
+                   if (ubPreBit)
+                   {
+                     us1Count += 4;
+                   }
+-                  // 0 1
++                  /* 0 1*/
+                   else 
+                   {
+                     us1Count = 4;
+@@ -1152,7 +1222,7 @@
+                   break;
+ 
+                 case 0x05:
+-                  // 1 0101
++                  /* 1 0101*/
+                   if (ubPreBit) 
+                   {
+                     lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, us1Count, usDy, usPosX10, usPosX01, usWidth);
+@@ -1162,13 +1232,13 @@
+                     usPosX10 = usBytePos - us1Count;
+                     usDy = 0;
+                   }
+-                  // 0 0101
++                  /* 0 0101*/
+                   usPosX01 = usBytePos + 1;
+                   lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, usDy, usPosX10, usPosX01, usWidth);
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+ 
+-                  // next
++                  /* next*/
+                   usPosX10 = 0;
+                   usPosX01 = 2;
+                   usDy = 0;
+@@ -1176,12 +1246,12 @@
+                             break;
+ 
+                 case 0x09:
+-                  // 1 1001
++                  /* 1 1001*/
+                   if (ubPreBit)
+                   {
+                     us1Count++;
+                   }
+-                  // 0 1001
++                  /* 0 1001*/
+                   else 
+                   {
+                     usPosX01 = usBytePos;
+@@ -1191,7 +1261,7 @@
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+ 
+-                  // next
++                  /* next*/
+                   if (ubPreBit)
+                   {       
+                     usPosX10 = usBytePos - us1Count + 1;
+@@ -1207,12 +1277,12 @@
+                   break;
+ 
+                 case 0x0a:
+-                  // 1 1010
++                  /* 1 1010*/
+                   if (ubPreBit)
+                   {
+                     us1Count++;
+                   }
+-                  // 0 1010
++                  /* 0 1010*/
+                   else 
+                   {
+                     us1Count = 1;
+@@ -1222,25 +1292,25 @@
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+ 
+-                  // next
++                  /* next*/
+                   usPosX10 = usBytePos - us1Count + 1;
+                   usPosX01 = usBytePos + 2;
+                   lTmp = (*UpdateScanLine[ubSizeMode])(out_buf, 1, 0, usPosX10, usPosX01, usWidth);
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+-                  // next
++                  /* next*/
+                   usPosX10 = usBytePos + 2;
+                   usDy = 0;
+                   us1Count = 0;
+                   break;
+ 
+                 case 0x0b:
+-                  // 1 1011
++                  /* 1 1011*/
+                   if (ubPreBit)
+                   {
+                     us1Count++;
+                   }
+-                  // 0 1011
++                  /* 0 1011*/
+                   else 
+                   {
+                     us1Count = 1;
+@@ -1250,7 +1320,7 @@
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+ 
+-                  // next
++                  /* next*/
+                   if (ubPreBit)
+                   {       
+                     usPosX10 = usBytePos - us1Count + 1;
+@@ -1267,12 +1337,12 @@
+                   break;
+ 
+                 case 0x0d:
+-                  // 1 1101
++                  /* 1 1101*/
+                   if (ubPreBit)
+                   {
+                     us1Count += 2;
+                   }
+-                  // 0 1101
++                  /* 0 1101*/
+                   else 
+                   {
+                     us1Count = 2;
+@@ -1282,7 +1352,7 @@
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+ 
+-                  // next
++                  /* next*/
+                   if (ubPreBit)
+                   {
+                     usPosX10 = usBytePos - us1Count + 2;
+@@ -1298,17 +1368,17 @@
+                   break;
+ 
+                 default:
+-                  // X X 1 X
++                  /* X X 1 X*/
+                   lTmp = GetSimpleScan(out_buf, ubSizeMode, &us1Count, &usDy, &usPosX10, &usPosX01, usBytePos, ubTemp, 4, ubPreBit, usWidth);
+                   out_buf = out_buf + lTmp;
+                   lScanSize += lTmp;
+                   break;
+-              } // end of switch()
++              } /* end of switch()*/
+               ubPreBit = ubTemp & 0x01;
+-            } // end of k-loop
++            } /* end of k-loop*/
+           }
+           break;
+-      } // end of switch()
++      } /* end of switch()*/
+ 
+       ubPreBit = ubCrtByte & 0x01;
+     } /*for  usWidth */
+@@ -1326,7 +1396,7 @@
+     }
+     usDy++;
+ 
+-    // check size over
++    /* check size over*/
+     if ( (i % 5) == 4 ) 
+     {
+       lCrtSize = (long)((long)usWidth * (long)(i + 1));
+@@ -1342,7 +1412,7 @@
+     lScanSize = -1;
+   }
+   return(lScanSize);
+-} // end of scan_map() 
++} /* end of scan_map() */
+ 
+ /*****************************************************************
+  *  H : bmp2run
+@@ -1362,7 +1432,7 @@
+   unsigned char *tmp_buf1, *tmp_buf2;
+   long  scan_size;
+ 
+-  //return(-1); // 19990323 by bglee - request from SM Lee
++  /*return(-1);*/ /* 19990323 by bglee - request from SM Lee*/
+   
+   tmp_buf1 = in_buf;
+   tmp_buf2 = out_buf;
+@@ -1372,7 +1442,7 @@
+     return(-1);
+   }
+ 
+-  if ( !(ubMode & 0x02) )  // real compression //---
++  if ( !(ubMode & 0x02) )  /* real compression */
+   {
+     out_buf = tmp_buf2 + scan_size;
+     *out_buf++ = 0x00;
+@@ -1385,7 +1455,7 @@
+       scan_size += 2;
+     }
+   }
+-  else    // pre-compression
++  else    /* pre-compression*/
+   {
+     scan_size += 2;
+     if (scan_size % 4) 
diff --git a/print/ghostscript7/files/patch-src:smartgdi-contrib.mak b/print/ghostscript7/files/patch-src:smartgdi-contrib.mak
new file mode 100644
index 000000000000..3b832daff662
--- /dev/null
+++ b/print/ghostscript7/files/patch-src:smartgdi-contrib.mak
@@ -0,0 +1,16 @@
+--- src/smartgdi-contrib.mak.orig	Wed Jun 19 21:43:43 2002
++++ src/smartgdi-contrib.mak	Mon Jul 21 13:59:00 2003
+@@ -3,10 +3,12 @@
+ ### Note : this driver is used by Samsung SmartGDI compatible printers.   ###
+ ###
+ 
++gdi_opts=-DGS_VERSION_MAJOR=$(GS_VERSION_MAJOR)
++
+ GDIMONO=$(GLOBJ)gdevgdi.$(OBJ) $(HPPCL)
+ 
+ $(DD)gdi.dev: $(GDIMONO) $(DD)page.dev
+ 	$(SETPDEV) $(DD)gdi $(GDIMONO)
+ 
+ $(GLOBJ)gdevgdi.$(OBJ): $(GLSRC)gdevgdi.c $(PDEVH) $(gdevpcl_h)
+-	$(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(GLSRC)gdevgdi.c
++	$(GLCC) $(GLO_)gdevgdi.$(OBJ) $(C_) $(gdi_opts) $(GLSRC)gdevgdi.c