2 files changed, 369 insertions, 0 deletions

diff --git a/sysutils/smartmontools/files/ciss-patch b/sysutils/smartmontools/files/ciss-patch
new file mode 100644
index 000000000000..1c0e627d39fe
--- /dev/null
+++ b/sysutils/smartmontools/files/ciss-patch
@@ -0,0 +1,172 @@
+--- os_freebsd.cpp	Sat Sep 16 23:17:53 2006
++++ os_freebsd.cpp	Sat Mar  3 05:00:36 2007
+@@ -38,4 +39,5 @@
+ #include "utility.h"
+ #include "os_freebsd.h"
++#include "extern.h"
+ 
+ static const char *filenameandversion="$Id: os_freebsd.cpp,v 1.51 2006/09/17 03:17:53 dpgilbert Exp $";
+@@ -47,4 +49,7 @@
+ extern int exitstatus;
+ 
++/* for passing global control variables */
++extern smartmonctrl *con;
++
+ // Private table of open devices: guaranteed zero on startup since
+ // part of static data.
+@@ -86,8 +91,11 @@
+ 
+ // Like open().  Return positive integer handle, used by functions below only.  mode=="ATA" or "SCSI".
+-int deviceopen (const char* dev, char* mode __unused) {
++int deviceopen (const char* dev, char* mode) {
+   struct freebsd_dev_channel *fdchan;
+   int parse_ok, i;
+ 
++  if (strcasecmp(mode, "CCISS") == 0)
++    return open(dev, O_RDONLY);
++
+   // Search table for a free entry
+   for (i=0; i<FREEBSD_MAXDEV; i++)
+@@ -440,5 +453,6 @@
+ 
+ // Interface to SCSI devices.  See os_linux.c
+-int do_scsi_cmnd_io(int fd, struct scsi_cmnd_io * iop, int report)
++static int
++do_normal_scsi_cmnd_io(int fd, struct scsi_cmnd_io * iop, int report)
+ {
+   struct freebsd_dev_channel* con = NULL;
+@@ -541,4 +555,21 @@
+ }
+ 
++#include "ciss_common.c"
++
++int do_scsi_cmnd_io(int dev_fd, struct scsi_cmnd_io * iop, int report)
++{
++     switch(con->controller_type)
++     {
++         case CONTROLLER_CCISS:
++             return cciss_io_interface(dev_fd, con->controller_port-1, iop, report);
++             // not reached
++             break;
++         default:
++             return do_normal_scsi_cmnd_io(dev_fd, iop, report);
++             // not reached
++             break;
++     }
++}
++
+ // Interface to ATA devices behind 3ware escalade RAID controller cards.  See os_linux.c
+ 
+@@ -871,16 +902,17 @@
+ // specific) SCSI device name in FreeBSD can be sd, sr, scd, st, nst,
+ // osst, nosst and sg.
+-static const char * fbsd_dev_prefix = "/dev/";
+-static const char * fbsd_dev_ata_disk_prefix = "ad";
+-static const char * fbsd_dev_scsi_disk_plus = "da";
+-static const char * fbsd_dev_scsi_tape1 = "sa";
+-static const char * fbsd_dev_scsi_tape2 = "nsa";
+-static const char * fbsd_dev_scsi_tape3 = "esa";
+-static const char * fbsd_dev_twe_ctrl = "twe";
+-static const char * fbsd_dev_twa_ctrl = "twa";
++static const char fbsd_dev_prefix[] = "/dev/";
++static const char fbsd_dev_ata_disk_prefix[] = "ad";
++static const char fbsd_dev_scsi_disk_plus[] = "da";
++static const char fbsd_dev_scsi_tape1[] = "sa";
++static const char fbsd_dev_scsi_tape2[] = "nsa";
++static const char fbsd_dev_scsi_tape3[] = "esa";
++static const char fbsd_dev_twe_ctrl[] = "twe";
++static const char fbsd_dev_twa_ctrl[] = "twa";
++static const char fbsd_dev_ciss_ctrl[] = "ciss";
+ 
+ static int parse_ata_chan_dev(const char * dev_name, struct freebsd_dev_channel *chan) {
+   int len;
+-  int dev_prefix_len = strlen(fbsd_dev_prefix);
++  int dev_prefix_len = sizeof fbsd_dev_prefix - 1;
+   
+   // if dev_name null, or string length zero
+@@ -898,5 +930,5 @@
+   // form /dev/ad* or ad*
+   if (!strncmp(fbsd_dev_ata_disk_prefix, dev_name,
+-               strlen(fbsd_dev_ata_disk_prefix))) {
++               sizeof fbsd_dev_ata_disk_prefix - 1)) {
+ #ifndef IOCATAREQUEST
+     if (chan != NULL) {
+@@ -911,24 +943,24 @@
+   // form /dev/da* or da*
+   if (!strncmp(fbsd_dev_scsi_disk_plus, dev_name,
+-               strlen(fbsd_dev_scsi_disk_plus)))
++               sizeof fbsd_dev_scsi_disk_plus - 1))
+     goto handlescsi;
+ 
+   // form /dev/sa* or sa*
+   if (!strncmp(fbsd_dev_scsi_tape1, dev_name,
+-              strlen(fbsd_dev_scsi_tape1)))
++              sizeof fbsd_dev_scsi_tape1 - 1))
+     goto handlescsi;
+ 
+   // form /dev/nsa* or nsa*
+   if (!strncmp(fbsd_dev_scsi_tape2, dev_name,
+-              strlen(fbsd_dev_scsi_tape2)))
++              sizeof fbsd_dev_scsi_tape2 - 1))
+     goto handlescsi;
+ 
+   // form /dev/esa* or esa*
+   if (!strncmp(fbsd_dev_scsi_tape3, dev_name,
+-              strlen(fbsd_dev_scsi_tape3)))
++              sizeof fbsd_dev_scsi_tape3 - 1))
+     goto handlescsi;
+   
+   if (!strncmp(fbsd_dev_twa_ctrl,dev_name,
+-	       strlen(fbsd_dev_twa_ctrl))) {
++	       sizeof fbsd_dev_twa_ctrl - 1)) {
+     if (chan != NULL) {
+       if (get_tw_channel_unit(dev_name,&(chan->channel),&(chan->device))<0) {
+@@ -943,5 +975,5 @@
+ 
+   if (!strncmp(fbsd_dev_twe_ctrl,dev_name,
+-	       strlen(fbsd_dev_twe_ctrl))) {
++	       sizeof fbsd_dev_twe_ctrl - 1)) {
+     if (chan != NULL) {
+       if (get_tw_channel_unit(dev_name,&(chan->channel),&(chan->device))<0) {
+@@ -953,4 +985,13 @@
+     }
+     return CONTROLLER_3WARE_678K_CHAR;
++  }
++  // form /dev/esa* or esa*
++  if (!strncmp(fbsd_dev_ciss_ctrl, dev_name,
++	       sizeof fbsd_dev_ciss_ctrl - 1)) {
++  // This is of dubious value, as the desired disk's (unit's) number
++  // still must be specified explicitly with the `-d' option
++	warnx("Use the `-d' option to access drives behind %s. "
++	    "See smartctl(8) manual page.", dev_name);
++	return CONTROLLER_CCISS;
+   }
+ 
+--- smartctl.8.in	Wed Dec 20 02:30:43 2006
++++ smartctl.8.in	Sat Mar  3 05:22:28 2007
+@@ -303,5 +303,5 @@
+ .B HighPoint RocketRAID controllers are currently ONLY supported under Linux.
+ 
+-.B cciss controllers are currently ONLY supported under Linux.
++.B cciss controllers are currently ONLY supported under Linux and FreeBSD.
+ 
+ .TP
+@@ -1257,7 +1257,7 @@
+ .PP
+ .nf
+-.B smartctl \-a \-d cciss,0 /dev/cciss/c0d0
++.B smartctl \-a \-d cciss,0 /dev/ciss0
+ .fi
+-Examine all SMART data for the first SCSI disk connected to a cciss
++Examine all SMART data for the first SCSI disk connected to the first ciss
+ RAID controller card.
+ .PP
+--- smartd.8.in	Wed Dec 20 02:30:43 2006
++++ smartd.8.in	Sat Mar  3 05:24:51 2007
+@@ -717,5 +717,5 @@
+ with XX in the range from 00 to 15 inclusive.
+ 
+-.B 3ware and cciss controllers are currently ONLY supported under Linux.
++.B 3ware and cciss controllers are currently ONLY supported under Linux and FreeBSD.
+ 
+ .I hpt,L/M/N
diff --git a/sysutils/smartmontools/files/ciss_common.c b/sysutils/smartmontools/files/ciss_common.c
new file mode 100644
index 000000000000..80dfaf812cf0
--- /dev/null
+++ b/sysutils/smartmontools/files/ciss_common.c
@@ -0,0 +1,197 @@
+/*
+ * This bits are ripped almost verbatim from os_linux.cpp to allow
+ * FreeBSD, which has the same ciss-ioctls as Linux, to access
+ * individual drives behind ciss(4) controllers.
+ * Authors of smartmontools may wish to make this code shared between
+ * *BSD and Linux, but * currently it remains a duplicate.
+ *
+ *	Mikhail T. <mi@aldan.algebra.com>
+ */
+
+/*
+ * This header is not currently installed under /usr/include. Thus
+ * having a kernel source tree is required to compile this file. Use:
+ *
+ *	-I/sys/dev/ciss
+ *
+ * to build. Rather unfortunate...
+ */
+#include <cissio.h>
+
+#define SEND_IOCTL_RESP_SENSE_LEN 16    /* ioctl limitation */
+#define LSCSI_DRIVER_SENSE  0x8 /* alternate CHECK CONDITION indication */
+
+static int cciss_io_interface(int device, int target,
+			      struct scsi_cmnd_io * iop, int report);
+
+typedef int8_t	BYTE; /* some kind of Linuxism? */
+typedef uint32_t DWORD;
+
+typedef struct _ReportLUNdata_struct
+{
+  BYTE LUNListLength[4];
+  DWORD reserved;
+  BYTE LUN[CISS_MAX_LUN][8];
+} ReportLunData_struct;
+
+/* Structure/defines of Report Physical LUNS of drive */
+#define CISS_MAX_LUN        16
+#define CISS_MAX_PHYS_LUN   1024
+#define CISS_REPORT_PHYS    0xc3
+
+// CCISS Smart Array Controller
+static int cciss_sendpassthru(unsigned int cmdtype, unsigned char *CDB,
+    			unsigned int CDBlen, char *buff,
+    			unsigned int size, unsigned int LunID,
+    			unsigned char *scsi3addr, int fd)
+{
+    int err ;
+    IOCTL_Command_struct iocommand;
+
+    memset(&iocommand, 0, sizeof(iocommand));
+
+    if (cmdtype == 0) 
+    {
+        // To controller; nothing to do
+    }
+    else if (cmdtype == 1) 
+    {
+        iocommand.LUN_info.LogDev.VolId = LunID;
+        iocommand.LUN_info.LogDev.Mode = 1;
+    }
+    else if (cmdtype == 2) 
+    {
+        memcpy(&iocommand.LUN_info.LunAddrBytes,scsi3addr,8);
+        iocommand.LUN_info.LogDev.Mode = 0;
+    }
+    else 
+    {
+        fprintf(stderr, "cciss_sendpassthru: bad cmdtype\n");
+        return 1;
+    }
+
+    memcpy(&iocommand.Request.CDB[0], CDB, CDBlen);
+    iocommand.Request.CDBLen = CDBlen;
+    iocommand.Request.Type.Type = TYPE_CMD;
+    iocommand.Request.Type.Attribute = ATTR_SIMPLE;
+    iocommand.Request.Type.Direction = XFER_READ;
+    iocommand.Request.Timeout = 0;
+
+    iocommand.buf_size = size;
+    iocommand.buf = (unsigned char *)buff;
+
+    if ((err = ioctl(fd, CCISS_PASSTHRU, &iocommand))) 
+    {
+        perror("CCISS ioctl error");
+    }
+    return err;
+}
+
+static int cciss_getlun(int device, int target, unsigned char *physlun)
+{
+    unsigned char CDB[16]= {0};
+    ReportLunData_struct *luns;
+    int reportlunsize = sizeof(*luns) + CISS_MAX_PHYS_LUN * 8;
+    int i;
+    int ret;
+
+    luns = (ReportLunData_struct *)malloc(reportlunsize);
+
+    memset(luns, 0, reportlunsize);
+
+    /* Get Physical LUN Info (for physical device) */
+    CDB[0] = CISS_REPORT_PHYS;
+    CDB[6] = (reportlunsize >> 24) & 0xFF;  /* MSB */
+    CDB[7] = (reportlunsize >> 16) & 0xFF;
+    CDB[8] = (reportlunsize >> 8) & 0xFF;
+    CDB[9] = reportlunsize & 0xFF;
+
+    if ((ret = cciss_sendpassthru(0, CDB, 12, (char *)luns, reportlunsize, 0, NULL, device)))
+    {
+        free(luns);
+        return ret;
+    }
+
+    for (i=0; i<CISS_MAX_LUN+1; i++) 
+    {
+        if (luns->LUN[i][6] == target) 
+        {
+            memcpy(physlun, luns->LUN[i], 8);
+            free(luns);
+            return 0;
+        }
+    }
+
+    free(luns);
+    return ret;
+}
+// end CCISS Smart Array Controller
+
+/* cciss >> CCSISS I/O passthrough
+   This is an interface that uses the cciss passthrough to talk to the SMART controller on
+   the HP system. The cciss driver provides a way to send SCSI cmds through the CCISS passthrough
+   essentially the methods above and below pertain to SCSI, except for the SG driver which is not
+   involved. The CCISS driver does not engage the scsi subsystem. */
+ static int cciss_io_interface(int device, int target, struct scsi_cmnd_io * iop, int report)
+ {
+     unsigned char pBuf[512] = {0};
+     unsigned char phylun[1024] = {0};
+     int iBufLen = 512;
+     int status = -1;
+     int len = 0; // used later in the code.
+     report = 0;
+ 
+     cciss_getlun(device, target, phylun);
+     status = cciss_sendpassthru( 2, iop->cmnd, iop->cmnd_len, (char*) pBuf, iBufLen, 1, phylun, device);
+ 
+     if (0 == status)
+     {
+         if (report > 0)
+             printf("  status=0\n");
+         if (DXFER_FROM_DEVICE == iop->dxfer_dir)
+         {
+             memcpy(iop->dxferp, pBuf, iop->dxfer_len);
+             if (report > 1)
+             {
+                 int trunc = (iop->dxfer_len > 256) ? 1 : 0;
+                 printf("  Incoming data, len=%d%s:\n", (int)iop->dxfer_len,
+                      (trunc ? " [only first 256 bytes shown]" : ""));
+                 dStrHex((const char*)iop->dxferp, (trunc ? 256 : iop->dxfer_len) , 1);
+             }
+         }
+         return 0;
+     }
+     iop->scsi_status = status & 0x7e; /* bits 0 and 7 used to be for vendors */
+     if (LSCSI_DRIVER_SENSE == ((status >> 24) & 0xf))
+         iop->scsi_status = SCSI_STATUS_CHECK_CONDITION;
+     len = (SEND_IOCTL_RESP_SENSE_LEN < iop->max_sense_len) ?
+                SEND_IOCTL_RESP_SENSE_LEN : iop->max_sense_len;
+     if ((SCSI_STATUS_CHECK_CONDITION == iop->scsi_status) &&
+         iop->sensep && (len > 0))
+     {
+         memcpy(iop->sensep, pBuf, len);
+         iop->resp_sense_len = iBufLen;
+         if (report > 1)
+         {
+             printf("  >>> Sense buffer, len=%d:\n", (int)len);
+             dStrHex((const char *)pBuf, len , 1);
+         }
+     }
+     if (report)
+     {
+         if (SCSI_STATUS_CHECK_CONDITION == iop->scsi_status) {
+             printf("  status=%x: sense_key=%x asc=%x ascq=%x\n", status & 0xff,
+                  pBuf[2] & 0xf, pBuf[12], pBuf[13]);
+         }
+         else
+             printf("  status=0x%x\n", status);
+     }
+     if (iop->scsi_status > 0)
+         return 0;
+     else
+     {
+         if (report > 0)
+             printf("  ioctl status=0x%x but scsi status=0, fail with EIO\n", status);
+         return -EIO;      /* give up, assume no device there */
+     }
+ }