15 files changed, 795 insertions, 0 deletions

diff --git a/www/cacheboy15-devel/Makefile b/www/cacheboy15-devel/Makefile
new file mode 100644
index 000000000000..18b03502d5bf
--- /dev/null
+++ b/www/cacheboy15-devel/Makefile
@@ -0,0 +1,417 @@
+# New ports collection makefile for:	squid24
+# Date created:		Tue Mar 27 14:56:08 CEST 2001
+# Whom:			Adrian Chadd <adrian@FreeBSD.org>
+#
+# $FreeBSD$
+#
+# Tunables not (yet) configurable via 'make config':
+# SQUID_{U,G}ID
+#   Which user/group Squid should run as (default: squid/squid).
+#   The user and group will be created if they do not already exist using
+#   a uid:gid of 100:100.
+#   NOTE: older versions of Squid defaulted to nobody/nogroup.
+#   If you wish to run Squid as "nobody" (which is not recommended), please
+#   define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment
+#   before you start the update or installation of this port.
+#
+# SQUID_LANGUAGES
+#   A list of languages for which error page files should be installed
+#   (default: all)
+#
+#   E.g. use `make SQUID_LANGUAGES="English French"' if you want to
+#   install the files for these languages only.
+#   Use `make -VSQUID_LANGUAGES' or scroll down to this variable's
+#   definition to see which values are valid.
+#
+# SQUID_DEFAULT_LANG
+#   If you define SQUID_LANGUAGES, select which language should be the default
+#   one (this variable defaults to English). This setting can be overwritten
+#   with squid.conf's error_directory directive.
+#
+# SQUID_CONFIGURE_ARGS
+#   Additional configuration options.
+#
+#   To enable them, use e.g
+#   `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install'
+#
+#   The list below may be incomplete, please see the configure script
+#   in the Squid source distribution for the complete list of additional
+#   options.
+#   Note that you probably do not need to worry about these options in most
+#   cases, they are included in case you want to experiment with them.
+#
+#    --enable-dlmalloc
+#     Compile and use the malloc package from Doug Lea
+#    --enable-gnuregex
+#     Compile and use the supplied GNUregex routines instead of BSD regex
+#     (not recommended).
+#    --enable-xmalloc-statistics
+#     Show malloc statistics in status page
+#    --enable-cachemgr-hostname=some.hostname
+#     Set an explicit hostname in cachemgr.cgi
+#    --enable-truncate
+#     Use truncate() rather than unlink()
+#    --disable-unlinkd
+#     Do not use "unlinkd"
+#    --with-aufs-threads=N_THREADS
+#     Tune the number of worker threads for the aufs object
+#    --with-coss-membuf-size
+#     COSS membuf size (default: 1048576 bytes)
+#    --with-maxfd=N
+#     Override the maximum number of filedescriptors. Useful if you
+#     build as another user who is not privileged to use the amount
+#     of filedescriptors the resulting binary is expected to support.
+#    --enable-ntlm-fail-open
+#     Enable NTLM fail open, where a helper that fails one of the
+#     Authentication steps can allow Squid to still authenticate the user
+#    --enable-x-accelerator-vary
+#     Enable support for the X-Accelerator-Vary HTTP header. Can be used
+#     to indicate variance within an accelerator setup. Typically used
+#     together with other code that adds custom HTTP headers to the
+#     requests.
+#    --enable-forward-log
+#     Enable experimental forward_log directive.
+#    --enable-multicast-miss
+#     Enable experimental multicast notification of cachemisses.
+
+# FATAL: Makefile: order must be PORTNAME/PORTVERSION/DISTVERSIONPREFIX/DISTVERSION/DISTVERSIONSUFFIX/PORTREVISION/PORTEPOCH/CATEGORIES/MASTER_SITES/MASTER_SITE_SUBDIR/PKGNAMEPREFIX/PKGNAMESUFFIX/DISTNAME/EXTRACT_SUFX/DISTFILES/DIST_SUBDIR/EXTRACT_ONLY.
+
+PORTNAME=	cacheboy
+DISTVERSION=	0.PRE1
+PORTREVISION=	1
+CATEGORIES=	www
+MASTER_SITES=	http://cacheboy.googlecode.com/files/
+MASTER_SITE_SUBDIR=	/
+DISTNAME=	CACHEBOY_0.PRE1
+# EXTRACT_SUFX=	.tar.gz
+DIST_SUBDIR=	CACHEBOY_0.PRE1
+
+MAINTAINER=	adrian@freebsd.org
+COMMENT=	HTTP Caching Proxy (Squid Derivative)
+
+CONFLICTS=	squid-[0-9]*
+GNU_CONFIGURE=	yes
+USE_PERL5=	yes
+USE_RC_SUBR=	squid
+
+SQUID_UID?=	squid
+SQUID_GID?=	squid
+
+MAN8=		cachemgr.cgi.8 squid.8
+docs=		QUICKSTART README.Squid doc/debug-sections.txt
+PORTDOCS=	${docs:T}
+PORTEXAMPLES=	passwd.sql
+SUB_FILES+=	pkg-deinstall pkg-install pkg-message
+SUB_LIST+=	SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID}
+
+OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
+		SQUID_SASL_AUTH "Install SASL authentication helpers" off \
+		SQUID_DELAY_POOLS "Enable delay pools" off \
+		SQUID_SNMP "Enable SNMP support" off \
+		SQUID_CARP "Enable CARP support" on \
+		SQUID_SSL "Enable SSL support for reverse proxies" off \
+		SQUID_PINGER "Install the icmp helper" off \
+		SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \
+		SQUID_HTCP "Enable HTCP support" off \
+		SQUID_VIA_DB "Enable forward/via database" off \
+		SQUID_CACHE_DIGESTS "Enable cache digests" off \
+		SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \
+		SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \
+		SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \
+		SQUID_IDENT "Enable ident (RFC 931) lookups" on \
+		SQUID_REFERER_LOG "Enable Referer-header logging" off \
+		SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \
+		SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \
+		SQUID_PF "Enable transparent proxying with PF" off \
+		SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \
+		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
+		SQUID_AUFS "Enable the aufs storage scheme" off \
+		SQUID_COSS "Enable the COSS storage scheme" off \
+		SQUID_KQUEUE "Use kqueue(2) instead of poll(2)" on \
+		SQUID_LARGEFILE "Support log and cache files >2GB" off \
+		SQUID_STACKTRACES "Create backtraces on fatal errors" off
+
+etc_files=	squid/cachemgr.conf.default \
+		squid/mib.txt squid/mime.conf.default \
+		squid/msntauth.conf.default squid/squid.conf.default
+
+icon_files=	anthony-binhex.gif anthony-bomb.gif anthony-box.gif \
+		anthony-box2.gif anthony-c.gif anthony-compressed.gif \
+		anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \
+		anthony-f.gif anthony-image.gif anthony-image2.gif \
+		anthony-layout.gif anthony-link.gif anthony-movie.gif \
+		anthony-pdf.gif anthony-portal.gif anthony-ps.gif \
+		anthony-quill.gif anthony-script.gif anthony-sound.gif \
+		anthony-tar.gif anthony-tex.gif anthony-text.gif \
+		anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif
+
+error_files=	ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \
+		ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \
+		ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \
+		ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \
+		ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \
+		ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \
+		ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \
+		ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \
+		ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \
+		ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \
+		ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT
+
+libexec=	cachemgr.cgi digest_pw_auth diskd-daemon \
+		ip_user_check \
+		msnt_auth ncsa_auth ntlm_auth \
+		pam_auth smb_auth smb_auth.sh squid_db_auth squid_session \
+		squid_unix_group wbinfo_group.pl
+.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
+libexec+=	unlinkd
+.endif
+
+sbin=		RunCache squidclient squid
+
+CONFIGURE_ARGS=	--bindir=${PREFIX}/sbin  \
+		--sbindir=${PREFIX}/sbin  \
+		--datadir=${PREFIX}/etc/squid \
+		--libexecdir=${PREFIX}/libexec/squid \
+		--localstatedir=${PREFIX}/squid \
+		--sysconfdir=${PREFIX}/etc/squid \
+		--enable-removal-policies="lru heap" \
+		--disable-linux-netfilter \
+		--disable-linux-tproxy \
+		--disable-epoll
+
+.include <bsd.port.pre.mk>
+
+# Authentication methods and modules:
+
+basic_auth=	DB NCSA PAM MSNT SMB
+digest_auth=	password
+external_acl=	ip_user session unix_group wbinfo_group
+MAN8+=		ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \
+		squid_unix_group.8
+.if defined(WITH_SQUID_LDAP_AUTH)
+USE_OPENLDAP=	yes
+CFLAGS+=	-I${LOCALBASE}/include
+LDFLAGS+=	-L${LOCALBASE}/lib
+MAN8+=		squid_ldap_auth.8 squid_ldap_group.8
+basic_auth+=	LDAP
+digest_auth+=	ldap
+external_acl+=	ldap_group
+libexec+=	digest_ldap_auth squid_ldap_auth squid_ldap_group
+.endif
+.if defined(WITH_SQUID_SASL_AUTH)
+LIB_DEPENDS+=	sasl2.2:${PORTSDIR}/security/cyrus-sasl2
+CFLAGS+=	-I${LOCALBASE}/include
+CPPFLAGS+=	-I${LOCALBASE}/include
+LDFLAGS+=	-L${LOCALBASE}/lib
+basic_auth+=	SASL
+libexec+=	sasl_auth
+.endif
+.if !defined(NO_NIS) && !defined(WITHOUT_NIS)
+basic_auth+=	YP
+libexec+=	yp_auth
+.endif
+CONFIGURE_ARGS+=	--enable-auth="basic ntlm digest" \
+			--enable-basic-auth-helpers="${basic_auth}" \
+			--enable-digest-auth-helpers="${digest_auth}" \
+			--enable-external-acl-helpers="${external_acl}" \
+			--enable-ntlm-auth-helpers="SMB"
+.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
+# XXX This currently only works with heimdal from the base system,
+#     see files/patch-helpers_negotiate_auth-squid_kerb_auth_*
+CONFIGURE_ARGS+=	--enable-negotiate-auth-helpers="squid_kerb_auth"
+libexec+=	squid_kerb_auth
+.endif
+
+# Storage schemes:
+
+storage_schemes=	ufs diskd null
+.if defined(WITH_SQUID_AUFS)
+storage_schemes+=	aufs
+.if ${OSVERSION}>=501000
+# Only document libmap.conf where it is available:
+EXTRA_PATCHES+=		${PATCHDIR}/extra-patch-src-cf.data.pre.aufs
+.endif
+# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS
+CONFIGURE_ARGS+=	--with-pthreads
+CFLAGS+=	${PTHREAD_CFLAGS}
+.endif
+.if defined(WITH_SQUID_COSS)
+storage_schemes+=	coss
+.if !defined(WITH_SQUID_AUFS)
+# use Posix AIO instead of aufs' AIO; note that you then need the kernel to
+# supply AIO support, either by loading the aio(4) module (n/a on 4.x) or by
+# adding the option VFS_AIO to your kernel configuration if you want to
+# actually use COSS storage:
+CONFIGURE_ARGS+=	--enable-coss-aio-ops
+.endif
+sbin+=		cossdump
+.endif
+CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
+
+# Other options set via 'make config':
+
+.if defined(WITH_SQUID_DELAY_POOLS)
+CONFIGURE_ARGS+=	--enable-delay-pools
+.endif
+.if defined(WITH_SQUID_SNMP)
+CONFIGURE_ARGS+=	--enable-snmp
+.endif
+.if defined(WITHOUT_SQUID_CARP)
+CONFIGURE_ARGS+=	--disable-carp
+.endif
+.if defined(WITH_SQUID_SSL)
+# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
+# works when it is defined before bsd.port{.pre}.mk is .included.
+# This makes it currently impossible to combine this macro with OPTIONS to
+# conditionally include OpenSSL support.
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
+CONFIGURE_ARGS+=	--enable-ssl \
+			--with-openssl="${OPENSSLBASE}"
+CFLAGS+=	-I${OPENSSLINC}
+LDFLAGS+=	-L${OPENSSLLIB}
+.endif
+.if defined(WITH_SQUID_PINGER)
+CONFIGURE_ARGS+=	--enable-icmp
+libexec+=	pinger
+.endif
+.if defined(WITH_SQUID_DNS_HELPER)
+CONFIGURE_ARGS+=	--disable-internal-dns
+libexec+=	dnsserver
+.endif
+.if defined(WITH_SQUID_HTCP)
+CONFIGURE_ARGS+=	--enable-htcp
+.endif
+.if defined(WITH_SQUID_VIA_DB)
+CONFIGURE_ARGS+=	--enable-forw-via-db
+.endif
+.if defined(WITH_SQUID_CACHE_DIGESTS)
+CONFIGURE_ARGS+=	--enable-cache-digests
+.endif
+.if defined(WITHOUT_SQUID_WCCP)
+CONFIGURE_ARGS+=	--disable-wccp
+.endif
+.if defined(WITH_SQUID_WCCPV2)
+CONFIGURE_ARGS+=	--enable-wccpv2
+.endif
+.if defined(WITH_SQUID_STRICT_HTTP)
+CONFIGURE_ARGS+=	--disable-http-violations
+.endif
+.if defined(WITHOUT_SQUID_IDENT)
+CONFIGURE_ARGS+=	--disable-ident-lookups
+.endif
+.if defined(WITH_SQUID_REFERER_LOG)
+CONFIGURE_ARGS+=	--enable-referer-log
+.endif
+.if defined(WITH_SQUID_USERAGENT_LOG)
+CONFIGURE_ARGS+=	--enable-useragent-log
+.endif
+.if defined(WITH_SQUID_ARP_ACL)
+CONFIGURE_ARGS+=	--enable-arp-acl
+.endif
+.if defined(WITH_SQUID_PF)
+CONFIGURE_ARGS+=	--enable-pf-transparent
+.if ${OSVERSION} < 502106
+IGNORE=		pf available only in FreeBSD 5.3 and newer
+.endif
+.endif
+# IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE,
+# they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to
+# 2003-06-27 (OSVERSION < 501101).
+#
+# Please see PR misc/44148 and the CVS log of src/include/Makefile for further
+# information.
+.if defined(WITH_SQUID_IPFILTER)
+.if (${OSVERSION} > 500032 && ${OSVERSION} < 501101)
+IGNORE=		the IPFilter headers are not part of the base system
+.else
+CONFIGURE_ARGS+=	--enable-ipf-transparent
+.endif
+.endif
+.if defined(WITH_SQUID_FOLLOW_XFF)
+CONFIGURE_ARGS+=	--enable-follow-x-forwarded-for
+.endif
+.if defined(WITHOUT_SQUID_KQUEUE)
+CONFIGURE_ARGS+=	--disable-kqueue
+.endif
+.if defined(WITH_SQUID_LARGEFILE)
+CONFIGURE_ARGS+=	--with-large-files --enable-large-cache-files
+.endif
+.if defined(WITH_SQUID_STACKTRACES)
+CONFIGURE_ARGS+=	--enable-stacktraces
+CFLAGS+=	-g
+STRIP=
+.endif
+
+# Languages:
+#
+# If you do not define SQUID_LANGUAGES yourself, all available language files
+# will be installed; the default language will be English.
+
+SQUID_LANGUAGES?=	Armenian Azerbaijani Bulgarian Catalan Czech Danish \
+			Dutch English Estonian Finnish French German Greek \
+			Hebrew Hungarian Italian Japanese Korean Lithuanian \
+			Polish Portuguese Romanian Russian-1251 Russian-koi8-r \
+			Serbian Simplify_Chinese Slovak Spanish Swedish \
+			Traditional_Chinese Turkish
+SQUID_DEFAULT_LANG?=	English
+CONFIGURE_ARGS+=	--enable-err-languages="${SQUID_LANGUAGES}" \
+			--enable-default-err-language=${SQUID_DEFAULT_LANG}
+
+# Finally, add additional user specified configuration options:
+CONFIGURE_ARGS+=	${SQUID_CONFIGURE_ARGS}
+
+CONFIGURE_ENV+=		CFLAGS="${CFLAGS}" \
+			CPPFLAGS="${CPPFLAGS}"\
+			LDFLAGS="${LDFLAGS}"
+
+PLIST_DIRS=	etc/squid/icons libexec/squid
+PLIST_FILES=	${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \
+		${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
+
+.for d in ${SQUID_LANGUAGES}
+PLIST_DIRS+=	etc/squid/errors/${d}
+PLIST_FILES+=	${error_files:S,^,etc/squid/errors/${d}/,}
+.endfor
+PLIST_DIRS+=	etc/squid/errors etc/squid squid/logs squid/cache squid
+
+post-patch:
+	@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' \
+	    ${WRKSRC}/configure
+	@${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \
+	    -e 's|%%SQUID_GID%%|${SQUID_GID}|g' \
+	    -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/src/cf.data.pre
+	@${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \
+	    ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \
+	    ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh
+
+pre-install:
+# Prevent installation of .orig files by deleting them.
+	@${FIND} ${WRKSRC} -name '*.bak' -delete
+	@${FIND} ${WRKSRC} -name '*.orig' -delete
+
+pre-su-install:
+	@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
+	    ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL
+
+post-install:
+.if !defined(NOPORTEXAMPLES)
+	@${MKDIR} ${EXAMPLESDIR}
+	${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR}
+.endif
+.if defined(WITH_SQUID_PINGER)
+	${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \
+	${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger
+.endif
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${DOCSDIR}
+	cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR}
+.endif
+	@${SETENV} PKG_PREFIX=${PREFIX} \
+	    ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
+
+	@${ECHO_CMD} "===> post-installation information for ${PKGNAME}:"
+	@${ECHO_CMD} ""
+	@${CAT} ${PKGMESSAGE}
+	@${ECHO_CMD} ""
+
+.include <bsd.port.post.mk>
diff --git a/www/cacheboy15-devel/distinfo b/www/cacheboy15-devel/distinfo
new file mode 100644
index 000000000000..1b1c59307c9f
--- /dev/null
+++ b/www/cacheboy15-devel/distinfo
@@ -0,0 +1,3 @@
+MD5 (CACHEBOY_0.PRE1/CACHEBOY_0.PRE1.tar.gz) = 844a5a1d15d211d94c26993c956ed695
+SHA256 (CACHEBOY_0.PRE1/CACHEBOY_0.PRE1.tar.gz) = 14aff6c61e4e9c3b0f0ec0ff0f5c6714e18230d78eb522e1ebe55578ebdad819
+SIZE (CACHEBOY_0.PRE1/CACHEBOY_0.PRE1.tar.gz) = 2086632
diff --git a/www/cacheboy15-devel/files/extra-patch-src-cf.data.pre.aufs b/www/cacheboy15-devel/files/extra-patch-src-cf.data.pre.aufs
new file mode 100644
index 000000000000..019fdcac0fc7
--- /dev/null
+++ b/www/cacheboy15-devel/files/extra-patch-src-cf.data.pre.aufs
@@ -0,0 +1,20 @@
+--- src/cf.data.pre.orig	Wed Nov  1 15:12:02 2006
++++ src/cf.data.pre	Wed Nov  1 15:12:17 2006
+@@ -1097,6 +1100,17 @@
+ 
+ 	see argument descriptions under ufs above
+ 
++	Note:
++	By default, FreeBSD uses the pthread(3) M:N threading library.
++	You can, however, map the thread library to the 1:1 libthr(3)
++	implementation by inserting the following lines into
++	/etc/libmap.conf and see whether this performs better on your
++	system:
++
++	[%%PREFIX%%/sbin/squid]
++	libpthread.so.1	libthr.so.1
++	libpthread.so.2	libthr.so.2
++
+ 	The diskd store type:
+ 
+ 	"diskd" uses the same storage format as "ufs", utilizing a
diff --git a/www/cacheboy15-devel/files/patch-aa b/www/cacheboy15-devel/files/patch-aa
new file mode 100644
index 000000000000..ec93f2dd3c39
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-aa
@@ -0,0 +1,11 @@
+--- include/squid_types.h.orig Mon Jul  7 00:45:26 2003
++++ include/squid_types.h      Mon Jul  7 00:48:39 2003
+@@ -66,8 +66,5 @@
+ #if HAVE_SYS_TYPES_H
+ #include <sys/types.h>
+ #endif
+-#if HAVE_SYS_BITYPES_H
+-#include <sys/bitypes.h>
+-#endif
+
+ #endif /* SQUID_TYPES_H */
diff --git a/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-Makefile.in b/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-Makefile.in
new file mode 100644
index 000000000000..09a82638fd3c
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-Makefile.in
@@ -0,0 +1,11 @@
+--- helpers/basic_auth/SMB/Makefile.in.orig	Tue Oct  4 07:29:26 2005
++++ helpers/basic_auth/SMB/Makefile.in	Tue Oct  4 07:29:49 2005
+@@ -129,7 +129,7 @@
+ makesnmplib = @makesnmplib@
+ 
+ SMB_AUTH_HELPER = smb_auth.sh
+-SAMBAPREFIX = /usr/local/samba
++SAMBAPREFIX = %%LOCALBASE%%
+ SMB_AUTH_HELPER_PATH = $(libexecdir)/$(SMB_AUTH_HELPER)
+ 
+ libexec_SCRIPTS = $(SMB_AUTH_HELPER)
diff --git a/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-smb_auth.sh b/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-smb_auth.sh
new file mode 100644
index 000000000000..8f41fa2ff024
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-helpers-basic_auth-SMB-smb_auth.sh
@@ -0,0 +1,13 @@
+*** helpers/basic_auth/SMB/smb_auth.sh.orig	Thu Feb 26 20:58:22 2004
+--- helpers/basic_auth/SMB/smb_auth.sh	Thu Feb 26 20:59:45 2004
+***************
+*** 17,22 ****
+--- 17,24 ----
+  # along with this program; if not, write to the Free Software
+  # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  
++ SAMBAPREFIX=${SAMBAPREFIX:-%%LOCALBASE%%}
++ 
+  read DOMAINNAME
+  read PASSTHROUGH
+  read NMBADDR
diff --git a/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-Makefile.in b/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-Makefile.in
new file mode 100644
index 000000000000..ca72c3f2fdd0
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-Makefile.in
@@ -0,0 +1,19 @@
+--- helpers/negotiate_auth/squid_kerb_auth/Makefile.in.orig	Mon Jul 16 20:40:58 2007
++++ helpers/negotiate_auth/squid_kerb_auth/Makefile.in	Mon Jul 16 20:44:52 2007
+@@ -264,12 +264,12 @@
+ #-L$(top_builddir)/lib -lmiscutil $(XTRA_LIBS)
+ 
+ # HEIMDAL
+-#KERBINC = -DHEIMDAL -I/usr/include/heimdal
+-#KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken
++KERBINC = -DHEIMDAL -I/usr/include
++KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken -lcrypt -lcrypto
+ 
+ # MIT
+-KERBINC = 
+-KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
++#KERBINC = 
++#KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
+ all: all-am
+ 
+ .SUFFIXES:
diff --git a/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-squid_kerb_auth.c b/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-squid_kerb_auth.c
new file mode 100644
index 000000000000..14f2ac56e21a
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-helpers-negotiate_auth-squid_kerb_auth-squid_kerb_auth.c
@@ -0,0 +1,10 @@
+--- helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c.orig	Mon Jul 16 21:10:10 2007
++++ helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c	Mon Jul 16 21:10:35 2007
+@@ -31,6 +31,7 @@
+ #include <unistd.h>
+ #include <time.h>
+ #include <sys/time.h>
++#include <sys/param.h>
+ 
+ #include "base64.h"
+ #ifndef HAVE_SPNEGO
diff --git a/www/cacheboy15-devel/files/patch-src-cf.data.pre b/www/cacheboy15-devel/files/patch-src-cf.data.pre
new file mode 100644
index 000000000000..6cb44428ed2b
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-src-cf.data.pre
@@ -0,0 +1,50 @@
+--- src/cf.data.pre.orig	Tue Jun 26 01:34:57 2007
++++ src/cf.data.pre	Mon Jul 16 20:02:21 2007
+@@ -1207,6 +1207,21 @@
+ 
+ 	Note that for coss, max-size must be less than COSS_MEMBUF_SZ
+ 	(hard coded at 1 MB).
++
++	Note for FreeBSD users:
++	COSS -- like aufs -- uses async IO so if you compiled Squid without
++	support for the aufs storage type, COSS will use POSIX AIO.
++	This means that you need to add the line
++
++	options VFS_AIO
++
++	to your kernel configuration in order to use COSS.
++
++	On FreeBSD 5 and higher you can load the aio(4) module and do not
++	necessarily need to recompile your kernel.
++
++	If you compiled Squid with both support for aufs and COSS, COSS
++	will use aufs' routines and does not need special kernel support.
+ DOC_END
+ 
+ NAME: logformat
+@@ -1439,6 +1454,10 @@
+ LOC: Config.pidFilename
+ DOC_START
+ 	A filename to write the process-id to.  To disable, enter "none".
++
++	Note: If you change this setting, you need to set squid_pidfile
++	in /etc/rc.conf to reflect the new value. Please see
++	%%PREFIX%%/etc/rc.d/squid for details.
+ DOC_END
+ 
+ NAME: debug_options
+@@ -3275,12 +3294,12 @@
+ 
+ NAME: cache_effective_user
+ TYPE: string
+-DEFAULT: nobody
++DEFAULT: %%SQUID_UID%%
+ LOC: Config.effectiveUser
+ DOC_START
+ 	If you start Squid as root, it will change its effective/real
+ 	UID/GID to the user specified below.  The default is to change
+-	to UID to nobody.  If you define cache_effective_user, but not
++	to UID to %%SQUID_UID%%.  If you define cache_effective_user, but not
+ 	cache_effective_group, Squid sets the GID to the effective
+ 	user's default group ID (taken from the password file) and
+ 	supplementary group list from the from groups membership of
diff --git a/www/cacheboy15-devel/files/patch-tools-Makefile.in b/www/cacheboy15-devel/files/patch-tools-Makefile.in
new file mode 100644
index 000000000000..3daee0c17c82
--- /dev/null
+++ b/www/cacheboy15-devel/files/patch-tools-Makefile.in
@@ -0,0 +1,11 @@
+--- tools/Makefile.in.orig	Sun May 14 18:30:04 2006
++++ tools/Makefile.in	Sun May 14 18:31:02 2006
+@@ -297,7 +297,7 @@
+ EXTRA_DIST = \
+ 	cachemgr.conf
+ 
+-DEFAULT_CACHEMGR_CONFIG = $(sysconfdir)/cachemgr.conf
++DEFAULT_CACHEMGR_CONFIG = $(sysconfdir)/cachemgr.conf.default
+ 
+ # Don't automatically uninstall config files
+ #	@if test -f $(DESTDIR)$(DEFAULT_CONFIG_FILE) ; then \
diff --git a/www/cacheboy15-devel/files/pkg-deinstall.in b/www/cacheboy15-devel/files/pkg-deinstall.in
new file mode 100644
index 000000000000..397c79bdc843
--- /dev/null
+++ b/www/cacheboy15-devel/files/pkg-deinstall.in
@@ -0,0 +1,39 @@
+#!/bin/sh
+#
+# $FreeBSD: /tmp/pcvs/ports/www/cacheboy15-devel/files/pkg-deinstall.in,v 1.1 2008-04-18 06:29:39 adrian Exp $
+#
+
+PATH=/bin:/usr/bin:/usr/sbin
+
+case $2 in
+DEINSTALL)
+	cd ${PKG_PREFIX}/etc/squid || exit 1
+	for f in cachemgr.conf mime.conf msntauth.conf squid.conf; do
+		cmp -s -z ${f} ${f}.default && rm ${f}
+	done
+	;;
+POST-DEINSTALL)
+	echo "===> post-deinstallation information for $1:"
+	echo ""
+	echo "     Note:"
+	echo "     Squid related user accounts and groups were not removed."
+	echo ""
+	echo "     To remove the '%%SQUID_UID%%' user and the '%%SQUID_GID%%' group which were"
+	echo "     created by a default installation of this package, run"
+	echo ""
+	echo "     pw userdel -n %%SQUID_UID%% -u 100"
+	if  [ -d ${PKG_PREFIX}/squid -o -d ${PKG_PREFIX}/etc/squid ] ; then
+		echo ""
+		echo "     In order to ease updates the cache and log directories"
+		echo "     and all configuration files modified by you were preserved."
+		echo ""
+		echo "     Please remove them manually if you do not want to use"
+	       	echo "     Squid any longer."
+	fi
+	echo ""
+	;;
+*)
+	exit 64
+	;;
+esac
+exit 0
diff --git a/www/cacheboy15-devel/files/pkg-install.in b/www/cacheboy15-devel/files/pkg-install.in
new file mode 100644
index 000000000000..e5237f7e5624
--- /dev/null
+++ b/www/cacheboy15-devel/files/pkg-install.in
@@ -0,0 +1,81 @@
+#!/bin/sh
+#
+# $FreeBSD: /tmp/pcvs/ports/www/cacheboy15-devel/files/pkg-install.in,v 1.1 2008-04-18 06:29:39 adrian Exp $
+#
+
+PATH=/bin:/usr/bin:/usr/sbin
+pkgname=$1
+squid_base="${PKG_PREFIX:-%%PREFIX%%}/squid"
+squid_confdir="${PKG_PREFIX:-%%PREFIX%%}/etc/squid"
+if [ -x /usr/sbin/nologin ]; then
+	nologin=/usr/sbin/nologin
+else
+	nologin=/sbin/nologin
+fi
+squid_user="%%SQUID_UID%%"
+squid_group="%%SQUID_GID%%"
+squid_gid=100
+squid_uid=100
+case $2 in
+PRE-INSTALL)
+	echo "===> Pre-installation configuration for ${pkgname}"
+	if ! pw groupshow ${squid_group} -q >/dev/null ; then
+		echo "There is no group '${squid_group}' on this system, so I will try to create it (using group id ${squid_gid}):"
+		if ! pw groupadd ${squid_group} -g ${squid_gid} -q ; then
+			echo "Failed to create group \"${squid_group}\"!" >&2
+			echo "Please create it manually." >&2
+			exit 1
+		else
+			echo "Group '${squid_group}' created successfully:"
+		fi
+	else
+		echo "I will use the existing group '${squid_group}':"
+	fi
+	pw groupshow ${squid_group}
+
+	if ! pw usershow ${squid_user} -q >/dev/null ; then
+		echo "There is no account '${squid_user}' on this system, so I will try to create it (using user id ${squid_uid}):"
+		if ! pw useradd -q -n ${squid_user} \
+		    -u ${squid_uid} -g ${squid_group} \
+	  	    -c "Squid caching-proxy pseudo user" \
+		    -d "${squid_base}" -s "${nologin}" \
+		    -h - ; then
+			echo "Failed to create user '${squid_user}'!" >&2
+			echo "Please create it manually." >&2
+			exit 1
+		else
+			echo "User '${squid_user}' created successfully:"
+		fi
+	else
+		echo "I will use the existing user '${squid_user}':"
+	fi
+	pw usershow ${squid_user}
+	for dir in cache logs; do
+	if [ ! -d ${squid_base}/${dir} ]; then
+		echo "Creating ${squid_base}/${dir}..."
+		install -d -o ${squid_user} -g ${squid_group} \
+		    -m 0750 ${squid_base}/${dir}
+	fi
+	done
+	if [ ! -d ${squid_confdir} ]; then
+		echo "Creating ${squid_confdir}..."
+		install -d -o root -g ${squid_group} \
+		    -m 0750 ${squid_confdir}
+	fi
+	;;
+POST-INSTALL)
+	for file in cachemgr.conf mime.conf squid.conf; do
+		if [ ! -f ${squid_confdir}/${file} \
+		    -a -f ${squid_confdir}/${file}.default ]; then
+			echo "Creating ${file} from default..."
+			install -c -o root -g ${squid_group} -m 0640 \
+		    	    ${squid_confdir}/${file}.default \
+			    ${squid_confdir}/${file}
+		fi
+	done
+	;;
+*)
+	exit 64
+	;;
+esac
+exit 0
diff --git a/www/cacheboy15-devel/files/pkg-message.in b/www/cacheboy15-devel/files/pkg-message.in
new file mode 100644
index 000000000000..3f52e7bff6e2
--- /dev/null
+++ b/www/cacheboy15-devel/files/pkg-message.in
@@ -0,0 +1,37 @@
+
+     o This port looks a lot like Squid. Yes, thats because its based
+       on Squid-2.HEAD. The binaries and paths are the same as Squid -
+       this is intended to make migrating from Squid-2.X to Cacheboy
+       (sans ICAP) as effortless as possible.
+
+     o You can find the configuration files for this package in the
+       directory %%PREFIX%%/etc/squid.
+
+     o A cache directory has been created in %%PREFIX%%/squid/cache.
+       Log files will be written to %%PREFIX%%/squid/logs.
+
+       Note:
+       You must initialize new cache directories before you can start
+       squid.  Do this by running "squid -z" as 'root' or '%%SQUID_UID%%'.
+       If your cache directories are already initialized (e.g. after an
+       upgrade of squid) you do not need to initialize them again.
+
+     o The default configuration will deny everyone access to the
+       proxy service. Edit the "http_access" directives in
+       %%PREFIX%%/etc/squid/squid.conf to suit your needs.
+
+     Please note that the Cacheboy start script is an rc.d style script.
+     This means that Cacheboy will not start automatically at boot
+     time unless it is explicitly enabled.
+
+     To enable Cacheboy, set squid_enable=yes in either
+     /etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/squid
+     Please see %%PREFIX%%/etc/rc.d/squid(.sh) for further details.
+
+     Note:
+     If you just updated your Cacheboy installation from Squid 2.5 or earlier,
+     make sure to check your Cacheboy configuration against the default
+     configuration file %%PREFIX%%/etc/squid/squid.conf.default.
+
+     Additionally, you should check your configuration by calling
+     'squid -f /path/to/squid.conf -k parse' before starting Cacheboy.
diff --git a/www/cacheboy15-devel/files/squid.in b/www/cacheboy15-devel/files/squid.in
new file mode 100644
index 000000000000..bd9483908ae6
--- /dev/null
+++ b/www/cacheboy15-devel/files/squid.in
@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+# PROVIDE: squid
+# REQUIRE: LOGIN
+# KEYWORD: shutdown
+#
+# Note:
+# Set "squid_enable=yes" in either /etc/rc.conf, /etc/rc.conf.local or
+# /etc/rc.conf.d/squid to make this script actually do something. There
+# you can also set squid_chdir, squid_pidfile, squid_user, and squid_flags.
+#
+# Please see squid(8), rc.conf(5) and rc(8) for further details.
+#
+
+squid_checkrunning() {
+	${command} ${squid_flags} -k check 2>/dev/null
+}
+
+squid_stop() {
+	echo "Stopping ${name}."
+	${command} ${squid_flags} -k shutdown
+	run_rc_command poll
+}
+
+. %%RC_SUBR%%
+
+name=squid
+rcvar=${name}_enable
+
+command=%%PREFIX%%/sbin/squid
+extra_commands=reload
+reload_cmd="${command} ${squid_flags} -k reconfigure"
+stop_precmd="squid_checkrunning"
+stop_cmd="squid_stop"
+
+load_rc_config ${name}
+
+squid_chdir=${squid_chdir:-"%%PREFIX%%/squid/logs"}
+squid_enable=${squid_enable:-"NO"}
+squid_flags=${squid_flags-"-D"}
+squid_pidfile=${squid_pidfile:-"%%PREFIX%%/squid/logs/squid.pid"}
+squid_user=${squid_user:-%%SQUID_UID%%}
+default_config=%%PREFIX%%/etc/squid/squid.conf
+
+pidfile=${squid_pidfile}
+required_dirs=${squid_chdir}
+
+# squid(8) will not start if ${default_config} is not present so try
+# to catch that beforehand via ${required_files} rather than make
+# squid(8) crash.
+# If you remove the default configuration file make sure to add
+# '-f /path/to/your/squid.conf' to squid_flags
+
+if [ -z "${squid_flags}" ]; then
+	required_files=${default_config}
+fi
+
+run_rc_command "$1"
diff --git a/www/cacheboy15-devel/pkg-descr b/www/cacheboy15-devel/pkg-descr
new file mode 100644
index 000000000000..3716d8430937
--- /dev/null
+++ b/www/cacheboy15-devel/pkg-descr
@@ -0,0 +1,13 @@
+Cacheboy is a continuation of Squid-2 development which focuses on stability
+whilst improving performance, functionality and compliance.
+
+THIS SOFTWARE IS CURRENTLY BETA - the bugs need ironing out so please submit
+any mishaps as Issues via Google Code. New functionality will only appear after
+the code is stable, so please help us find and fix the bugs!
+
+Cacheboy supports all of the features found in Squid-2. This release
+currently doesn't support ICAP as it was never intergrated into the Squid-2
+release.
+
+WWW: http://www.cacheboy.net/
+WWW: http://code.google.com/p/cacheboy/