diff options
-rw-r--r-- | net/ntp/Makefile | 23 | ||||
-rw-r--r-- | net/ntp/Makefile.inc | 103 |
2 files changed, 114 insertions, 12 deletions
diff --git a/net/ntp/Makefile b/net/ntp/Makefile index 291ac43a65c3..9cf47e7cf47e 100644 --- a/net/ntp/Makefile +++ b/net/ntp/Makefile @@ -29,14 +29,16 @@ MAN1= sntp.1 \ ntpsnmpd.1 \ ntp-keygen.1 \ -OPTIONS= NTPSNMPD "Build and install ntpsnmpd" OFF \ - RAWDCF "Enable RAWDCF option" OFF \ - SSL "Enable SSL" ON +.include "Makefile.inc" .include <bsd.port.options.mk> -.if defined(WITH_RAWDCF) -CONFIGURE_ARGS+= --enable-RAWDCF +.if defined(WITH_NTPSNMPD) +PLIST_FILES+= bin/ntpsnmpd +BUILD_DEPENDS+= ${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp +RUN_DEPENDS+= ${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp +.else +CONFIGURE_ARGS+= --without-ntpsnmpd .endif .if !defined(WITH_SSL) @@ -48,15 +50,12 @@ CONFIGURE_ARGS+= --with-openssl-incdir=${OPENSSLINC} \ --with-openssl-libdir=${OPENSSLLIB} PLIST_SUB+= SSL="" .endif -CONFIGURE_ARGS+= --enable-ipv6 -.if defined(WITH_NTPSNMPD) -PLIST_FILES+= bin/ntpsnmpd -BUILD_DEPENDS+= ${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp -RUN_DEPENDS+= ${LOCALBASE}/include/net-snmp/net-snmp-config.h:${PORTSDIR}/net-mgmt/net-snmp -.else -CONFIGURE_ARGS+= --without-ntpsnmpd +.for D in ${NTP_DRIVERS} +.if defined(WITH_${D}) +CONFIGURE_ARGS+= --enable-${D} .endif +.endfor pre-configure: @cd ${WRKSRC} && ./bootstrap diff --git a/net/ntp/Makefile.inc b/net/ntp/Makefile.inc new file mode 100644 index 000000000000..86e7cb8dc61d --- /dev/null +++ b/net/ntp/Makefile.inc @@ -0,0 +1,103 @@ +# $FreeBSD$ + +OPTIONS= NTPSNMPD "Build and install ntpsnmpd" OFF \ + SSL "Enable SSL" ON \ + BANCOMM "Enable Datum/Bancomm bc635/VME interface" OFF \ + GPSVME "Enable TrueTime GPS receiver/VME interface" OFF \ + ACTS "Enable ACTS modem service" OFF \ + ARBITER "Enable Arbiter 1088A/B GPS receiver" OFF \ + ARCRON_MSF "Enable Arcron MSF receiver" OFF \ + AS2201 "Enable Austron 2200A/2201A GPS receiver" OFF \ + ATOM "Enable ATOM PPS interface" OFF \ + CHRONOLOG "Enable Chrono-log K-series WWVB receiver" OFF \ + CHU "Enable CHU modem/decoder" OFF \ + AUDIO_CHU "Enable CHU audio/decoder" OFF \ + DATUM "Enable Datum Programmable Time System" OFF \ + DUMBCLOCK "Enable Dumb generic hh:mm:ss local clock" OFF \ + FG "Enable Forum Graphic GPS" OFF \ + HEATH "Enable Heath GC-1000 WWV/WWVH receiver" OFF \ + HOPFSERIAL "Enable hopf serial clock device" OFF \ + HOPFPCI "Enable hopf 6039 PCI board" OFF \ + HPGPS "Enable HP 58503A GPS receiver" OFF \ + IRIG "Enable IRIG audio decoder" OFF \ + JJY "Enable JJY receiver" OFF \ + JUPITER "Enable Rockwell Jupiter GPS receiver" OFF \ + LEITCH "Enable Leitch CSD 5300 Master Clock" OFF \ + LOCAL_CLOCK "Enable local clock reference" OFF \ + MX4200 "Enable Magnavox MX4200 GPS receiver" OFF \ + NEOCLOCK4X "Enable NeoClock4X DCF77 / TDF receiver" OFF \ + NMEA "Enable NMEA GPS receiver" OFF \ + ONCORE "Enable Motorola VP/UT Oncore GPS receiver" OFF \ + PALISADE "Enable Palisade clock" OFF \ + PCF "Enable Conrad parallel port radio clock" OFF \ + PST "Enable PST/Traconex 1020 WWV/WWVH receiver" OFF \ + RIPENCC "Enable RIPENCC specific Trimble driver" OFF \ + SHM "Enable SHM clock attached thru shared memory" OFF \ + SPECTRACOM "Enable Spectracom 8170/Netclock/2 WWVB" OFF \ + TRUETIME "Enable Kinemetrics/TrueTime receivers" OFF \ + ULINK "Enable Ultralink WWVB receiver" OFF \ + WWV "Enable WWV Audio receiver" OFF \ + ZYFER "Enable Zyfer GPStarplus receiver" OFF \ + COMPUTIME "Enable Diem Computime Radio Clock" OFF \ + DCF7000 "Enable ELV/DCF7000 clock" OFF \ + HOPF6021 "Enable HOPF 6021 clock" OFF \ + MEINBERG "Enable Meinberg clocks" OFF \ + RAWDCF "Enable DCF77 raw time code" OFF \ + RCC8000 "Enable RCC 8000 clock" OFF \ + SCHMID "Enable Schmid DCF77 clock" OFF \ + TRIMTAIP "Enable Trimble GPS receiver/TAIP protocol" OFF \ + TRIMTSIP "Enable Trimble GPS receiver/TSIP protocol" OFF \ + WHARTON "Enable WHARTON 400A Series clock" OFF \ + VARITEXT "Enable VARITEXT clock" OFF + +# Not supported by FreeBSD: TPRO "Enable KSI/Odetics TPRO/S GPS receiver/IRIG" OFF \ +# XXX Broken under FreeBSD: TT560 "Enable TrueTime 560 IRIG-B decoder" OFF \ + +NTP_DRIVERS= \ + BANCOMM \ + GPSVME \ + ACTS \ + ARBITER \ + ARCRON_MSF \ + AS2201 \ + ATOM \ + CHRONOLOG \ + CHU \ + AUDIO_CHU \ + DATUM \ + DUMBCLOCK \ + FG \ + HEATH \ + HOPFSERIAL \ + HOPFPCI \ + HPGPS \ + IRIG \ + JJY \ + JUPITER \ + LEITCH \ + LOCAL_CLOCK \ + MX4200 \ + NEOCLOCK4X \ + NMEA \ + ONCORE \ + PALISADE \ + PCF \ + PST \ + RIPENCC \ + SHM \ + SPECTRACOM \ + TRUETIME \ + ULINK \ + WWV \ + ZYFER \ + COMPUTIME \ + DCF7000 \ + HOPF6021 \ + MEINBERG \ + RAWDCF \ + RCC8000 \ + SCHMID \ + TRIMTAIP \ + TRIMTSIP \ + WHARTON \ + VARITEXT |