diff options
| -rw-r--r-- | x11/XFree86-4/scripts/configure | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/x11/XFree86-4/scripts/configure b/x11/XFree86-4/scripts/configure deleted file mode 100644 index 0a037abb8484..000000000000 --- a/x11/XFree86-4/scripts/configure +++ /dev/null @@ -1,244 +0,0 @@ -#!/bin/sh - -answset () { - if [ -n "$NO_INPUT" ]; then - echo "$2 [$1]" - answ=$1 - else - answ=X - fi -} - -yesno () { - answset $1 "$2" - while [ $answ = X ]; do - echo -n "$2 [$1] " - read answ - if [ X$answ = X ]; then answ=$1; fi - case $answ in - y|yes|Y|YES) answ=YES;; - n|no|N|NO) answ=NO;; - *) echo invalid answer - answ=X - ;; - esac - done -} -# workaround for compilation problems if XFree-4.0.x is installed -if [ -e ${PREFIX}/lib/libXft.so.1 ]; then - r=`nm ${PREFIX}/lib/libXft.so.1 | grep XftDirSave` - if [ "X$r" = X ]; then - echo "you seem to have an installed XFree-4.0.x port" - echo "please rename or remove ${PREFIX}/lib/libXft.so.1" - echo "in order to avoid compilation problems" - exit 1 - fi -fi -F=$WRKDIR/.config -configure () { -rm -f $F - -# set ProjectRoot to be ${PREFIX} -echo "#define ProjectRoot ${PREFIX}" >>$F - -cat >> $F <<END -#ifdef i386Architecture -#define XF86CardDrivers mga glint nv tga s3virge sis rendition \ - neomagic i740 tdfx savage \ - cirrus vmware tseng trident chips apm \ - GlideDriver fbdev i128 \ - ati AgpGartDrivers ark cyrix \ - siliconmotion \ - vesa vga XF86OSCardDrivers XF86ExtraCardDrivers -#else -#define XF86CardDrivers mga glint nv tga s3virge sis rendition \ - neomagic i740 tdfx savage \ - cirrus tseng trident chips apm \ - GlideDriver fbdev i128 \ - ati DevelDrivers ark cyrix \ - siliconmotion \ - vesa vga XF86OSCardDrivers XF86ExtraCardDrivers -#endif -END - -cat <<EOF -app-default files, startup configuration files, keyboard definitions -are normally installed in /etc/X11 (so that X binaries can be mounted -from a read-only volume like a CD-ROM). Otherwise default files will -be installed under /usr/X11R6. -EOF -yesno YES "Install config files in /etc/X11?" -if [ $answ = NO ]; then - echo '#define UseSeparateConfDir NO' >> $F - ETC=${PREFIX}/lib -else - ETC=/etc -fi - -cat <<END - Do you want to install the default system config files? This will overwrite - and files that you may be currently using. This would only be required - on a first time build. -END -if [ -e $ETC/X11/xdm/xdm-config ]; then - XDMDEFAULT=NO -else - XDMDEFAULT=YES -fi -if [ -e $ETC/X11/xinit/xinitrc ]; then - XINITDEFAULT=NO -else - XINITDEFAULT=YES -fi -if [ -e ${PREFIX}/lib/X11/fs/config ]; then - XFSDEFAULT=NO -else - XFSDEFAULT=YES -fi - -yesno $XDMDEFAULT "Install xdm config?" -echo "#define InstallXdmConfig $answ" >> $F -yesno $XINITDEFAULT "Install xinit config?" -echo "#define InstallXinitConfig $answ" >> $F - -yesno YES "Do you want to include support for the FontServer?" -echo "#define BuildFontServer $answ" >>$F -if [ $answ = YES ]; then - yesno $XFSDEFAULT "Install xfs config?" - echo "#define InstallFSConfig $answ" >> $F -else - echo "#define InstallFSConfig NO" >> $F -fi - -yesno YES "Do you want support for TrueType fonts?" -if [ $answ = NO ]; then - echo "#define BuildFreeType NO" >> $F - echo "#define BuildXTrueType NO" >> $F -fi -cat <<'END' - Do you want to Build Fonts (Usually you only want to build and install - fonts once, if this is a first time install you will want to build the - fonts) -END -yesno YES "Build fonts?" -echo "#define BuildFonts $answ" >> $F -if [ $answ = YES ]; then - yesno YES "Build/install the 75dpi fonts?" - echo "#define Build75DpiFonts $answ" >> $F - yesno YES "Build/install the 100dpi fonts?" - echo "#define Build100DpiFonts $answ" >> $F - yesno YES "Build/install the Speedo fonts?" - echo "#define BuildSpeedoFonts $answ" >> $F - yesno YES "Build/install the Type1 fonts?" - echo "#define BuildType1Fonts $answ" >> $F - yesno YES "Build/install the CID fonts?" - echo "#define BuildCIDFonts $answ" >> $F - yesno YES "Build/install the Cyrillic fonts?" - echo "#define BuildCyrillicFonts $answ" >> $F - yesno YES "Build/install the Latin2 fonts?" - echo "#define BuildLatin2Fonts $answ" >> $F -fi - -yesno YES "Build the servers with Extended input devices?" -if [ $answ = NO ]; then - echo "#define XInputDrivers mouse" >> $F -else - echo "#define XInputDrivers mouse dynapro elo2300 elographics magellan microtouch \ - mutouch spaceorb wacom void" >> $F -# XXX broken in 3.9.18 -# if [ X${MACHINE} != X"alpha" ]; then -# echo "#define JoystickSupport YES" >> $F -# fi -fi - -yesno YES "Build PEX?" -echo "#define BuildPexExt $answ" >> $F - -yesno YES "Build Xinerama?" -echo "#define BuildXinerama $answ" >> $F - -yesno YES "Build XIE?" -echo "#define BuildXIE $answ" >> $F -echo - -# XXX We may not want to default this to 'YES' if there are any app-default -# files installed -yesno YES "Install application defaults files?" -echo "#define InstallAppDefFiles $answ" >> $F - -yesno YES "Build static libraries in addition to shared libraries?" -echo "#define ForceNormalLib $answ" >> $F - -if [ ${OSVERSION} -ge 300000 ]; then -cat <<'END' - - FreeBSD-3.x has support for Secure RPC. - - While this scheme is not used for general purpose encryption, - some countries restrict the use of strong cryptography. - -END -yesno YES "Build with Secure RPC?" -echo "#define HasSecureRPC $answ" >> $F -fi -cat <<'END' - - MIT supplies an authentication mechanism that relies upon DES, this is - called XDM-AUTHORIZATION-1. - - Source code for this authentication mechanism may not be exported from - the United States, however, there are compatible replacements for this - mechanism available elsewhere. Also, while this scheme is not used for - general purpose encryption, some countries restrict the use of strong - cryptography. - - If you have aquired a copy of "Wraphelp.c" and it currently resides in - the same location as the XFree86 source or in the ports "files" - subdirectory, it will be copied into the right place in the X11 source - distribution and support for this feature will be enabled if you answer - YES to the following question. - - If you do not have a copy of this file, even if you answer YES to this - question, support will not be enabled. If you wish to change this later, - the option controling this is contained the file xc/config/cf/xf86site.def. - -END -yesno YES "Do you want to enable XDM-AUTHORIZATION-1 support?" -cpwh=NO -if [ $answ = YES ]; then - WH=$WRKDIR/xc/lib/Xdmcp/Wraphelp.c - - if [ -f $WH ] ; then - echo "==> $WH found in source distribution." - elif [ -f $DISTDIR/xc/Wraphelp.c ] ; then - echo "==> Wraphelp.c found in DISTDIR directory, copying to source tree." - cpwh=$DISTDIR/xc/Wraphelp.c - elif [ -f $FILESDIR/Wraphelp.c ] ; then - echo "==> Wraphelp.c found in files directory, copying to source tree." - cpwh=$FILESDIR/Wraphelp.c - else - echo "==> Wraphelp.c not found, DES support NOT enabled." - cpwh=NO - fi -fi -if [ $cpwh != NO ]; then - echo "#define HasXdmAuth $answ" >> $F -fi - -echo -yesno YES "Do you want to compile with PAM support?" -echo "#define HasPam $answ" >> $F - -echo "#define InstallXserverSetUID NO " >> $F -echo "#define BuildXF86DRI YES" >> $F -} - -configure - -if [ X$cpwh != XNO ]; then - tr -d '\r' < $cpwh > $WH -fi - -cat $F >> $WRKDIR/xc/config/cf/xf86site.def - -exit 0 |