diff options
| -rw-r--r-- | devel/portmk/Mk/bsd.port.mk | 119 | ||||
| -rw-r--r-- | ports-mgmt/portmk/Mk/bsd.port.mk | 119 |
2 files changed, 120 insertions, 118 deletions
diff --git a/devel/portmk/Mk/bsd.port.mk b/devel/portmk/Mk/bsd.port.mk index 1e612bffc88c..64ff0f69c757 100644 --- a/devel/portmk/Mk/bsd.port.mk +++ b/devel/portmk/Mk/bsd.port.mk @@ -201,6 +201,66 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # - Only build ports if ${ARCH} matches one of these. # NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. # +# Dependency checking. Use these if your port requires another port +# not in the list below. (Default: empty.) +# +# EXTRACT_DEPENDS +# - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "extract" stage. "path" is +# the name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "patch" stage. "path" is the +# name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends in the "fetch" stage. "path" is the +# name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the +# existence (if it is a full pathname) or search for +# it in your $PATH (if it is an executable) and go +# into "dir" to do a "make all install" if it's not +# found. If the third field ("target") exists, it will +# be used instead of ${DEPENDS_TARGET}. +# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends to build (between the "extract" and +# "build" stages, inclusive). The test done to +# determine the existence of the dependency is the +# same as FETCH_DEPENDS. If the third field ("target") +# exists, it will be used instead of ${DEPENDS_TARGET}. +# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends to run. The test done to determine +# the existence of the dependency is the same as +# FETCH_DEPENDS. This will be checked during the +# "install" stage and the name of the dependency will +# be put into the package as well. If the third field +# ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this +# package depends on. "lib" is the name of a shared library. +# make will use "ldconfig -r" to search for the library. +# lib can contain extended regular expressions. +# DEPENDS - A list of "dir[:target]" tuples of other ports this +# package depends on being made first. Use this only for +# things that don't fall into the above four categories. +# If the second field ("target") exists, it will be used +# instead of ${DEPENDS_TARGET}. +# +# DEPENDS_TARGET +# - The default target to execute when a port is calling a +# dependency. +# Default: install +# # These variables control options about how a port gets built and/or # are shorthand notations for common sets of dependencies. # Use these if your port uses some of the common software packages. By @@ -388,65 +448,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org ## # USE_APACHE - If set, this port relies on an apache webserver. # -# Dependency checking. Use these if your port requires another port -# not in the list above. (Default: empty.) -# -# EXTRACT_DEPENDS -# - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "extract" stage. "path" is -# the name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "patch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends in the "fetch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the -# existence (if it is a full pathname) or search for -# it in your $PATH (if it is an executable) and go -# into "dir" to do a "make all install" if it's not -# found. If the third field ("target") exists, it will -# be used instead of ${DEPENDS_TARGET}. -# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to build (between the "extract" and -# "build" stages, inclusive). The test done to -# determine the existence of the dependency is the -# same as FETCH_DEPENDS. If the third field ("target") -# exists, it will be used instead of ${DEPENDS_TARGET}. -# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to run. The test done to determine -# the existence of the dependency is the same as -# FETCH_DEPENDS. This will be checked during the -# "install" stage and the name of the dependency will -# be put into the package as well. If the third field -# ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this -# package depends on. "lib" is the name of a shared library. -# make will use "ldconfig -r" to search for the library. -# lib can contain extended regular expressions. -# DEPENDS - A list of "dir[:target]" tuples of other ports this -# package depends on being made first. Use this only for -# things that don't fall into the above four categories. -# If the second field ("target") exists, it will be used -# instead of ${DEPENDS_TARGET}. -# DEPENDS_TARGET -# - The default target to execute when a port is calling a -# dependency. -# Default: install -# # Conflict checking. Use if your port cannot be installed at the same time as # another package. # diff --git a/ports-mgmt/portmk/Mk/bsd.port.mk b/ports-mgmt/portmk/Mk/bsd.port.mk index 1e612bffc88c..64ff0f69c757 100644 --- a/ports-mgmt/portmk/Mk/bsd.port.mk +++ b/ports-mgmt/portmk/Mk/bsd.port.mk @@ -201,6 +201,66 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # - Only build ports if ${ARCH} matches one of these. # NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. # +# Dependency checking. Use these if your port requires another port +# not in the list below. (Default: empty.) +# +# EXTRACT_DEPENDS +# - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "extract" stage. "path" is +# the name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "patch" stage. "path" is the +# name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends in the "fetch" stage. "path" is the +# name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the +# existence (if it is a full pathname) or search for +# it in your $PATH (if it is an executable) and go +# into "dir" to do a "make all install" if it's not +# found. If the third field ("target") exists, it will +# be used instead of ${DEPENDS_TARGET}. +# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends to build (between the "extract" and +# "build" stages, inclusive). The test done to +# determine the existence of the dependency is the +# same as FETCH_DEPENDS. If the third field ("target") +# exists, it will be used instead of ${DEPENDS_TARGET}. +# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends to run. The test done to determine +# the existence of the dependency is the same as +# FETCH_DEPENDS. This will be checked during the +# "install" stage and the name of the dependency will +# be put into the package as well. If the third field +# ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this +# package depends on. "lib" is the name of a shared library. +# make will use "ldconfig -r" to search for the library. +# lib can contain extended regular expressions. +# DEPENDS - A list of "dir[:target]" tuples of other ports this +# package depends on being made first. Use this only for +# things that don't fall into the above four categories. +# If the second field ("target") exists, it will be used +# instead of ${DEPENDS_TARGET}. +# +# DEPENDS_TARGET +# - The default target to execute when a port is calling a +# dependency. +# Default: install +# # These variables control options about how a port gets built and/or # are shorthand notations for common sets of dependencies. # Use these if your port uses some of the common software packages. By @@ -388,65 +448,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org ## # USE_APACHE - If set, this port relies on an apache webserver. # -# Dependency checking. Use these if your port requires another port -# not in the list above. (Default: empty.) -# -# EXTRACT_DEPENDS -# - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "extract" stage. "path" is -# the name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "patch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends in the "fetch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the -# existence (if it is a full pathname) or search for -# it in your $PATH (if it is an executable) and go -# into "dir" to do a "make all install" if it's not -# found. If the third field ("target") exists, it will -# be used instead of ${DEPENDS_TARGET}. -# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to build (between the "extract" and -# "build" stages, inclusive). The test done to -# determine the existence of the dependency is the -# same as FETCH_DEPENDS. If the third field ("target") -# exists, it will be used instead of ${DEPENDS_TARGET}. -# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to run. The test done to determine -# the existence of the dependency is the same as -# FETCH_DEPENDS. This will be checked during the -# "install" stage and the name of the dependency will -# be put into the package as well. If the third field -# ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this -# package depends on. "lib" is the name of a shared library. -# make will use "ldconfig -r" to search for the library. -# lib can contain extended regular expressions. -# DEPENDS - A list of "dir[:target]" tuples of other ports this -# package depends on being made first. Use this only for -# things that don't fall into the above four categories. -# If the second field ("target") exists, it will be used -# instead of ${DEPENDS_TARGET}. -# DEPENDS_TARGET -# - The default target to execute when a port is calling a -# dependency. -# Default: install -# # Conflict checking. Use if your port cannot be installed at the same time as # another package. # |