diff options
| -rw-r--r-- | Mk/bsd.perl.mk | 255 | ||||
| -rw-r--r-- | Mk/bsd.port.mk | 85 |
2 files changed, 274 insertions, 66 deletions
diff --git a/Mk/bsd.perl.mk b/Mk/bsd.perl.mk new file mode 100644 index 000000000000..6179afb40c46 --- /dev/null +++ b/Mk/bsd.perl.mk @@ -0,0 +1,255 @@ +#-*- mode: makefile; tab-width: 4; -*- +# ex:ts=4 +# +# $FreeBSD$ +# +# bsd.perl.mk - Support for Perl-based ports. +# +# Created by: Gabor Kovesdan <gabor@FreeBSD.org> +# +# For FreeBSD committers: +# Please send all suggested changes to the maintainer instead of committing +# them to CVS yourself. +# +# PERL5 - Set to full path of perl5, either in the system or +# installed from a port. +# PERL - Set to full path of perl5, either in the system or +# installed from a port, but without the version number. +# Use this if you need to replace "#!" lines in scripts. +# PERL_VERSION - Full version of perl5 (see below for current value). +# PERL_VER - Short version of perl5 (see below for current value). +# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where +# M is major version, N is minor version, and P is +# the patch level. E.g., PERL_VERSION=5.6.1 would give +# a PERL_LEVEL of 500601. This can be used in comparisons +# to determine if the version of perl is high enough, +# whether a particular dependency is needed, etc. +# PERL_ARCH - Directory name of architecture dependent libraries +# (value: ${ARCH}-freebsd). +# PERL_PORT - Name of the perl port that is installed +# (value: perl5) +# SITE_PERL - Directory name where site specific perl packages go. +# This value is added to PLIST_SUB. +# USE_PERL5 - If your port needs a specific version of Perl, you +# can easily specify that with this knob. If +# you need a certain minimal version, but don't +# care if about the upperversion, just put the +# + sign behind the version. If you want to +# specify a latest version your port can be used +# with, suffix the version number with a - sign. +# Exact version can also be specified if you just +# set USE_PERL5 to the desired version. If you +# just set USE_PERL5 to "yes", Perl will be +# pulled in as a dependency but no version check +# is done. +# USE_PERL5_REASON +# - Along with USE_PERL5, you can set a specific reason, +# why a given version is required. +# +# Examples: +# USE_PERL5= yes # port requires any version of Perl5 to build. +# USE_PERL5= 5.6.0+ # port requires at least Perl 5.6.0 to build. +# USE_PERL5= 5.8.2 # port is only usable with Perl 5.8.2. +# USE_PERL5= 5.8.6- # port is only usbale with Perl 5.8.6 or prior. +# +# This line along with a properly set USE_PERL5 will give the user a reason, +# why the specific ports cannot be installed into the given environment. +# +# USE_PERL5_REASON= this module is already part of your Perl version +# +# PERL_CONFIGURE +# - Configure using Perl's MakeMaker. Implies USE_PERL5. +# The version requirement can be specified here, +# as well. +# USE_PERL5_BUILD +# - If set, this port uses perl5 in one or more of the +# extract, patch, build or install phases. +# The version requirement can be specified here, +# as well. +# USE_PERL5_RUN - If set, this port uses perl5 for running. The +# version requirement can be specified here, +# as well. +# PERL_MODBUILD - Use Module::Build to configure, build and install +# port. The version requirement can be specified +# here, as well. +# + +.if !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include) + +Perl_Pre_Include= bsd.perl.mk +PERL_Include_MAINTAINER= perl@FreeBSD.org + +# XXX to remain undefined until all ports that require Perl are fixed +# to set one of the conditionals that force the inclusion of bsd.perl.mk +.if defined(_PERL_REFACTORING_COMPLETE) + +PERL_VERSION?= 5.8.8 +PERL_VER?= 5.8.8 + +.if !defined(PERL_LEVEL) && defined(PERL_VERSION) +perl_major= ${PERL_VERSION:C|\..*||} +_perl_minor= ${PERL_VERSION:S|^${perl_major}||:S|^.||:C|\..*||} +_perl_patch= ${PERL_VERSION:S|^${perl_major}||:S|^.${_perl_minor}||:S|^.||:C|\..*||} +perl_minor= ${_perl_minor:S|^|000|:C|.*(...)|\1|} +perl_patch= ${_perl_patch:S|^|00|:C|.*(..)|\1|} +PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch} +.else +PERL_LEVEL= 0 +.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION) + +PERL_ARCH?= mach + +.if ${PERL_LEVEL} >= 500800 +PERL_PORT?= perl5.8 +.else # ${PERL_LEVEL} < 500800 +PERL_PORT?= perl5 +.endif + +SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER} +SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL} + +PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION} +PERL= ${LOCALBASE}/bin/perl + +PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ + PERL_VER=${PERL_VER} \ + PERL_ARCH=${PERL_ARCH} \ + SITE_PERL=${SITE_PERL_REL} + +.endif # defined(_PERL_REFACTORING_COMPLETE) + +# Decide where to look for the version string +.ifdef USE_PERL5 +USE_PERL5_STRING= ${USE_PERL5} +.elifdef USE_PERL5_BUILD +USE_PERL5_STRING= ${USE_PERL5_BUILD} +.elifdef USE_PERL5_RUN +USE_PERL5_STRING= ${USE_PERL5_RUN} +.elifdef PERL_MODBUILD +USE_PERL5_STRING= ${PERL_MODBUILD} +.elifdef PERL_CONFIGURE +USE_PERL5_STRING= ${PERL_CONFIGURE} +.else +USE_PERL5_STRING= yes # currently unreachable +.endif + +.if ${USE_PERL5_STRING:L} != "yes" +want_perl_sign= ${USE_PERL5_STRING:C|^[0-9.]+||} +want_perl_ver= ${USE_PERL5_STRING:S|${want_perl_sign}$||} +want_perl_major= ${want_perl_ver:C|\..*||} +_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||} +_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||} +want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|} +want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|} +USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch} + +# Mask unspecified components. E.g. this way "5" will match any "5.x.x". +.if empty(_want_perl_minor) +masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|} +.elif empty(_want_perl_patch) +masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|} +.else +masked_PERL_LEVEL= ${PERL_LEVEL} +.endif + +.if ${want_perl_sign} == "+" +.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL} +USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl5.8 and try again +IGNORE= ${USE_PERL5_REASON} +.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL} +.elif ${want_perl_sign} == "" +.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL} +USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly +IGNORE= ${USE_PERL5_REASON} +.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL} +.elif ${want_perl_sign} == "-" +.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL} +USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver} +IGNORE= ${USE_PERL5_REASON} +.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL} +.else # wrong suffix +IGNORE= improper use of USE_PERL5 +.endif +.endif #${USE_PERL5_STRING:L} != "yes" + +.if defined(PERL_MODBUILD) +PERL_CONFIGURE= yes +CONFIGURE_SCRIPT?= Build.PL +.if ${PORTNAME} != Module-Build +BUILD_DEPENDS+= ${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build +.endif +ALL_TARGET?= +PL_BUILD?= Build +CONFIGURE_ARGS+= \ + create_packlist=0 \ + install_path=lib="${PREFIX}/${SITE_PERL_REL}" \ + install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \ + install_path=script="${PREFIX}/bin" \ + install_path=bin="${PREFIX}/bin" \ + install_path=libdoc="${MAN3PREFIX}/man/man3" \ + install_path=bindoc="${MAN1PREFIX}/man/man1" +.elif defined(PERL_CONFIGURE) +CONFIGURE_ARGS+= INSTALLDIRS="site" +.endif # defined(PERL_MODBUILD) + +.if defined(PERL_CONFIGURE) +USE_PERL5= yes +.if defined(BATCH) && !defined(IS_INTERACTIVE) +CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES" +.endif # defined(BATCH) && !defined(IS_INTERACTIVE) +.endif # defined(PERL_CONFIGURE) + +.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) +EXTRACT_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} +PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} +BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} +.endif +.if defined(USE_PERL5) || defined(USE_PERL5_RUN) +RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} +.endif + +.if defined(PERL_CONFIGURE) +CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \ + INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib" +CONFIGURE_SCRIPT?= Makefile.PL +MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION} +.undef HAS_CONFIGURE +.endif # defined(PERL_CONFIGURE) +.endif # !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include) + +.if defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include) + +Perl_Post_Include= bsd.perl.mk + +.if defined(PERL_CONFIGURE) +.if !target(do-configure) +do-configure: + # XXX MCL had to duplicate this block; implies more refactoring needed + @if [ -f ${SCRIPTDIR}/configure ]; then \ + cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ + ${SCRIPTDIR}/configure; \ + fi + @cd ${CONFIGURE_WRKSRC} && \ + ${SETENV} ${CONFIGURE_ENV} \ + ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} +.if !defined(PERL_MODBUILD) + @cd ${CONFIGURE_WRKSRC} && \ + ${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile +.endif # !defined(PERL_MODBUILD) +.endif # !target(do-configure) +.endif # defined(PERL_CONFIGURE) + +.if defined(PERL_MODBUILD) +.if !target(do-build) +do-build: + @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET}) +.endif # !target(do-build) + +.if !defined(USE_GMAKE) +.if !target(do-install) +do-install: + @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET}) +.endif # !target(do-install) +.endif # !defined(USE_GMAKE) +.endif # defined(PERL_MODBUILD) +.endif # defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include) diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index 7f5260ecf2d0..060e5ab5bad9 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -1385,6 +1385,10 @@ LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG} -R PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg +# XXX to remain undefined until all ports that require Perl are fixed +# to set one of the conditionals that force the inclusion of bsd.perl.mk +.if !defined(_PERL_REFACTORING_COMPLETE) + PERL_VERSION?= 5.8.8 PERL_VER?= 5.8.8 @@ -1418,6 +1422,13 @@ SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL} PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION} PERL= ${LOCALBASE}/bin/perl +PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ + PERL_VER=${PERL_VER} \ + PERL_ARCH=${PERL_ARCH} \ + SITE_PERL=${SITE_PERL_REL} + +.endif # !defined(_PERL_REFACTORING_COMPLETE) + .if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" .endif @@ -1434,6 +1445,10 @@ PERL= ${LOCALBASE}/bin/perl .include "${PORTSDIR}/Mk/bsd.gnustep.mk" .endif +.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD) +.include "${PORTSDIR}/Mk/bsd.perl.mk" +.endif + .if defined(USE_PHP) .include "${PORTSDIR}/Mk/bsd.php.mk" .endif @@ -1921,47 +1936,6 @@ RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS} BUILD_DEPENDS+= bison:${PORTSDIR}/devel/bison .endif -PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ - PERL_VER=${PERL_VER} \ - PERL_ARCH=${PERL_ARCH} \ - SITE_PERL=${SITE_PERL_REL} - -.if defined(PERL_MODBUILD) -PERL_CONFIGURE= yes -CONFIGURE_SCRIPT?= Build.PL -.if ${PORTNAME} != Module-Build -BUILD_DEPENDS+= ${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build -.endif -ALL_TARGET?= -PL_BUILD?= Build -CONFIGURE_ARGS+= \ - create_packlist=0 \ - install_path=lib="${PREFIX}/${SITE_PERL_REL}" \ - install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \ - install_path=script="${PREFIX}/bin" \ - install_path=bin="${PREFIX}/bin" \ - install_path=libdoc="${MAN3PREFIX}/man/man3" \ - install_path=bindoc="${MAN1PREFIX}/man/man1" -.elif defined(PERL_CONFIGURE) -CONFIGURE_ARGS+= INSTALLDIRS="site" -.endif - -.if defined(PERL_CONFIGURE) -USE_PERL5= yes -.if (defined(BATCH) && !defined(IS_INTERACTIVE)) -CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES" -.endif -.endif - -.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) -EXTRACT_DEPENDS+=${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -.endif -.if defined(USE_PERL5) || defined(USE_PERL5_RUN) -RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -.endif - .if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" .endif @@ -2000,6 +1974,10 @@ RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} .include "${PORTSDIR}/Mk/bsd.sdl.mk" .endif +.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD) +.include "${PORTSDIR}/Mk/bsd.perl.mk" +.endif + .if defined(USE_PHP) .include "${PORTSDIR}/Mk/bsd.php.mk" .endif @@ -2835,14 +2813,6 @@ PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} LATEST_LINK?= ${PKGBASE} PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX} -.if defined(PERL_CONFIGURE) -CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \ - INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib" -CONFIGURE_SCRIPT?= Makefile.PL -MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION} -.undef HAS_CONFIGURE -.endif - CONFIGURE_SCRIPT?= configure CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL} CONFIGURE_LOG?= config.log @@ -3637,15 +3607,6 @@ do-configure: ${FALSE}; \ fi) .endif -.if defined(PERL_CONFIGURE) - @cd ${CONFIGURE_WRKSRC} && \ - ${SETENV} ${CONFIGURE_ENV} \ - ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} -.if !defined(PERL_MODBUILD) - @cd ${CONFIGURE_WRKSRC} && \ - ${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile -.endif -.endif .if defined(USE_IMAKE) @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF}) .endif @@ -3658,13 +3619,9 @@ do-build: .if defined(USE_GMAKE) @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) .else -.if defined(PERL_MODBUILD) - @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET}) -.else @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) .endif .endif -.endif # Check conflicts @@ -3706,16 +3663,12 @@ do-install: @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) .endif .else # !defined(USE_GMAKE) -.if defined(PERL_MODBUILD) - @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET}) -.else @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) .endif .endif .endif -.endif # Package |