diff options
| -rw-r--r-- | UPDATING | 574 |
1 files changed, 287 insertions, 287 deletions
@@ -1,5 +1,5 @@ This file documents some of the problems you may encounter when upgrading -your ports. We try our best to minimize these disruptions, but sometimes +your ports. We try our best to minimize these disruptions, but sometimes they are unavoidable. You should get into the habit of checking this file for changes each time @@ -64,7 +64,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of math/octave-forge* and benchmarks/octave-forge-benchmark AUTHOR: stephen@FreeBSD.org - The octave-forge* port structure has been completely redesigned. This was + The octave-forge* port structure has been completely redesigned. This was to make them compatible with portmaster and other port installation tools. Before using the new octave-forge* ports, the old octave-forge* ports must @@ -126,7 +126,7 @@ you update your ports collection, before attempting any port upgrades. desktutils/opengoo has been renamed to deskutils/fengoffice, because The OpenGoo name was changed to Feng Office Community Edition. - If you want migrate from opengoo to fengoffice, please see upgrading + If you want migrate from opengoo to fengoffice, please see upgrading section at: http://fengoffice.com/web/wiki/doku.php/installation @@ -147,8 +147,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.12 AUTHOR: skv@FreeBSD.org - lang/perl5.12 has been updated to 5.12.4. You should update everything - that depends on perl. The easiest way to do that is to use + lang/perl5.12 has been updated to 5.12.4. You should update everything + that depends on perl. The easiest way to do that is to use "perl-after-upgrade" script supplied with lang/perl5.12. Please see its manual page for details. @@ -185,8 +185,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.14 AUTHOR: skv@FreeBSD.org - lang/perl5.14 has been updated to 5.14.1. You should update everything - that depends on perl. The easiest way to do that is to use + lang/perl5.14 has been updated to 5.14.1. You should update everything + that depends on perl. The easiest way to do that is to use "perl-after-upgrade" script supplied with lang/perl5.14. Please see its manual page for details. @@ -213,7 +213,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: delphij@FreeBSD.org A change have been made to rc.d script for amavisd-milter makes it to - specify -s explicitly. If you used to override the location of listening + specify -s explicitly. If you used to override the location of listening socket by specifying -s, please migrate to the new way (specify amavisd_milter_socket in /etc/rc.conf). @@ -257,7 +257,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: dougb@FreeBSD.org The mariadb port has been split into -client, -scripts, and -server ports - ala mysql. You can now install only the parts that you need. + ala mysql. You can now install only the parts that you need. If you have devel/libevent installed along with mariadb you should do something like: @@ -531,7 +531,7 @@ you update your ports collection, before attempting any port upgrades. Ocaml compiler and libraries suite has been updated to 3.12. There appears to be an ABI incompatibility with .cmi files - generated by previous compiler versions. Though these should + generated by previous compiler versions. Though these should only affect the linking process, if some application you're using start to misbehave after the lang/ocaml updated you're advised to rebuild this applications using the new ocaml version. @@ -564,14 +564,14 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of net/openldap24-client AUTHOR: delphij@FreeBSD.org - OpenLDAP has been upgraded to 2.4.25. In this version, certain library - routines were moved from liblutil to libldap. If you previously built + OpenLDAP has been upgraded to 2.4.25. In this version, certain library + routines were moved from liblutil to libldap. If you previously built the library with "FETCH" support, this would cause libldap to depend on FreeBSD's libfetch.so library. As of 20110402, a local change have been introduced so OpenLDAP libraries - link against libfetch.so when FETCH is enabled. Normally, no further user + link against libfetch.so when FETCH is enabled. Normally, no further user interaction would be required. For new installations, the FETCH option have been turned off by default. @@ -664,7 +664,7 @@ you update your ports collection, before attempting any port upgrades. be generally compatible, but pay special attention to the new meaning of the --archive-dir command. In particular, the archive dir is now mandatory and defaults to ~/.cache/duplicity. You may have to - --exclude accordingly. In addition, it is recommended you consult + --exclude accordingly. In addition, it is recommended you consult the CHANGELOG, specifically the "New in v0.6.00 (2009/06/08)" section which details the checkpoint/restore feature (enabled by default) and its implications. @@ -673,7 +673,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of astro/boinc-setiathome-enhanced AUTHOR: rene@FreeBSD.org - The setiathome client has been updated to version 6.12. Before you + The setiathome client has been updated to version 6.12. Before you update, finish and report your current workunits to avoid losing them. 20110304: @@ -723,7 +723,7 @@ you update your ports collection, before attempting any port upgrades. (i.e. fully QA tested) procedure. The steps to carry out this operation are fully documented in the - JasperReports Server Installation Guide for the 3.7 release. You will + JasperReports Server Installation Guide for the 3.7 release. You will need to download the JasperServer 3.7 release package to get the relevant files and documentation. To download the JasperServer 3.7 WAR file distribution zip package, go to the JasperForge.org website and to the @@ -745,13 +745,13 @@ you update your ports collection, before attempting any port upgrades. 20110227: AFFECTS: users of net/unison and net/unison-devel - AUTHOR: mandree@FreeBSD.org + AUTHOR: mandree@FreeBSD.org Unison has been upgraded to version 2.40, which uses a different wire - protocol than 2.32 did. In order to support synchronization with + protocol than 2.32 did. In order to support synchronization with other computers where Unison is still at version 2.32, a new port - net/unison232 has been created. It provides unison232 and if that is - GTK2-enabled, also unison232-text. This unison232 port can be + net/unison232 has been created. It provides unison232 and if that is + GTK2-enabled, also unison232-text. This unison232 port can be installed in parallel with the existing net/unison port. 20110224: @@ -768,8 +768,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: delphij@FreeBSD.org OpenLDAP has been upgraded to 2.4.24, which requires a shared library - version bump. Therefore, you need to reinstall all ports that depend on - it. Please do something like: + version bump. Therefore, you need to reinstall all ports that depend on + it. Please do something like: # portupgrade -fr net/openldap24-client or @@ -793,8 +793,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.12 AUTHOR: skv@FreeBSD.org - lang/perl5.12 has been updated to 5.12.3. You should update everything - that depends on perl. The easiest way to do that is to use + lang/perl5.12 has been updated to 5.12.3. You should update everything + that depends on perl. The easiest way to do that is to use "perl-after-upgrade" script supplied with lang/perl5.12. Please see its manual page for details. @@ -807,7 +807,7 @@ you update your ports collection, before attempting any port upgrades. Postfix 2.8 introduces minor incompatibilities with previous versions. Alias expansion, dns lookups, TLS support, milters and other features - are affected. To avoid surprises, carefully review the RELEASE_NOTES. + are affected. To avoid surprises, carefully review the RELEASE_NOTES. If you upgrade from Postfix 2.6 or earlier, you must execute "postfix stop" and "postfix start" before you can use the postscreen(8) daemon. @@ -842,7 +842,7 @@ you update your ports collection, before attempting any port upgrades. is now the Exim run-time user, instead of root. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer - optional and is forced on. This is mitigated by the new build + optional and is forced on. This is mitigated by the new build option TRUSTED_CONFIG_LIST which defines a list of configuration files which are trusted; one per line. If a config file is owned by root and matches a pathname in the list, then it may be invoked @@ -852,10 +852,10 @@ you update your ports collection, before attempting any port upgrades. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically trusted to supply -D<Macro[=Value]> overrides on the command-line. Going forward, we recommend using TRUSTED_CONFIG_LIST with shim - configs that include the main config. As a transition mechanism, + configs that include the main config. As a transition mechanism, we are temporarily providing a work-around: the new build option WHITELIST_D_MACROS provides a colon-separated list of macro names - which may be overriden by the Exim run-time user. The values of + which may be overriden by the Exim run-time user. The values of these macros are constrained to the regex ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values). @@ -931,7 +931,7 @@ you update your ports collection, before attempting any port upgrades. increased from .17 to .18. Directly- and indirectly-dependent ports have had their PORTREVISION - bumped to facilitate rebuilding. Please rebuild the dependent ports + bumped to facilitate rebuilding. Please rebuild the dependent ports with your preferred upgrading tool: # portupgrade -rf security/libksba @@ -1060,9 +1060,9 @@ you update your ports collection, before attempting any port upgrades. The next stage in the ongoing cleanup of autotools-using ports is a refactoring of bsd.autotools.mk so that version numbers are no longer - needed within the USE_AUTOTOOLS stanza. There is either + needed within the USE_AUTOTOOLS stanza. There is either autoconf213/autoconf or automake14/automake (for the legacy versions, - and the currently available versions). This will considerably reduce + and the currently available versions). This will considerably reduce the amount of tree-wide patching in future on an update. IMPORTANT: if you have either devel/autoconf-wrapper or @@ -1135,11 +1135,11 @@ you update your ports collection, before attempting any port upgrades. Postfix no longer automatically appends the system default CA (certificate authority) certificates, when it reads the CA certificates specified with {smtp, lmtp, smtpd}_tls_CAfile or - with {smtp, lmtp, smtpd}_tls_CApath. This prevents third-party + with {smtp, lmtp, smtpd}_tls_CApath. This prevents third-party certificates from getting mail relay permission with the - permit_tls_all_clientcerts feature. Unfortunately, this change + permit_tls_all_clientcerts feature. Unfortunately, this change may cause compatibility problems with configurations that rely - on certificate verification for other purposes. To get the old + on certificate verification for other purposes. To get the old behavior, specify "tls_append_default_CA = yes". 20101124: @@ -1246,7 +1246,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Doug Barton <dougb@FreeBSD.org> The changes to bsd.port.mk in 1.652 require all portmaster users to - upgrade to version 3.1 or later. The best method to do this will be + upgrade to version 3.1 or later. The best method to do this will be to use the port, rather than portmaster itself: # pkg_delete -f portmaster\* @@ -1275,7 +1275,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Brooks Davis <brooks@FreeBSD.org> The clang portion of devel/llvm-devel has been split out and now - resides in lang/clang-devel. If you have devel/llvm-devel installed + resides in lang/clang-devel. If you have devel/llvm-devel installed in order to use clang, you will need to install the clang-devel port when upgrading. @@ -1298,7 +1298,7 @@ you update your ports collection, before attempting any port upgrades. This update includes major changes in how Kismet works and is configured. Clients, servers, drones, and configuration files must be updated to work - with the new version. Map support has not yet been added. + with the new version. Map support has not yet been added. See the kismet README for details. @@ -1359,7 +1359,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: roam@FreeBSD.org In stunnel-4.34, the DH support is no longer configurable by the user, - but always enabled when OpenSSL supports it instead. This means that + but always enabled when OpenSSL supports it instead. This means that it will now most probably be enabled on the supported versions of FreeBSD. If this leads to problems with old SSL clients, I will look into making it configurable at build time again. @@ -1402,8 +1402,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.12 AUTHOR: skv@FreeBSD.org - lang/perl5.12 has been updated to 5.12.2. You should update everything - that depends on perl. The easiest way to do that is to use + lang/perl5.12 has been updated to 5.12.2. You should update everything + that depends on perl. The easiest way to do that is to use "perl-after-upgrade" script supplied with lang/perl5.12. Please see its manual page for details. @@ -1416,7 +1416,7 @@ you update your ports collection, before attempting any port upgrades. With version 7.21.1, the cURL port is built with stricter compiler checking by default (the -Werror flag is passed to the C compiler, - making it treat any warnings as fatal errors). If you experience + making it treat any warnings as fatal errors). If you experience problems building cURL, re-run "make config" in the ftp/curl directory and disable the WERROR knob. @@ -1477,7 +1477,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/rubygem-rails AUTHOR: pgollucci@FreeBSD.org - Rails has been updated to 3.0.0. As always, make sure you check the + Rails has been updated to 3.0.0. As always, make sure you check the changes at http://weblog.rubyonrails.org/. 20100817: @@ -1504,7 +1504,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: osa@FreeBSD.org The redis configuration file, redis.conf, have been changed, some options - removed in newer versions (>=2.0). In some cases, redis-server with + removed in newer versions (>=2.0). In some cases, redis-server with older configuration might does not run at startup. If you run into startup problems, re-edit configuration file. @@ -1573,7 +1573,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: wxs@FreeBSD.org libgcrypt has been upgraded to 1.4.6 which has a shared library version - bump. You need to reinstall all ports that depend on it. Use something + bump. You need to reinstall all ports that depend on it. Use something like this: portupgrade -rf libgcrypt @@ -1649,10 +1649,10 @@ you update your ports collection, before attempting any port upgrades. The security/libassuan port has been updated to version 2.0.0, and the applications listed above have been updated to use it as of versions - 1.1.0 and 2.0.15 respectively. If you HAVE NOT updated your libassuan + 1.1.0 and 2.0.15 respectively. If you HAVE NOT updated your libassuan port as described in the 20100613 entry, you can simply update all 3 ports together (libassuan, dirmngr if installed, and gnupg) using your - normal upgrade path. If you HAVE updated to libassuan-1, then you need + normal upgrade path. If you HAVE updated to libassuan-1, then you need to do the following before upgrading dirmngr and gnupg. If you use portupgrade: @@ -1676,9 +1676,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: dougb@FreeBSD.org The security/libassuan port has been updated to version 2.0.0, however, - the applications listed above are not yet compatible with it. Therefore + the applications listed above are not yet compatible with it. Therefore security/libassuan-1 has been created until they can be updated, and the - ports listed above have been updated to depend on it. You must first + ports listed above have been updated to depend on it. You must first replace your existing libassuan with version 1 in the new location, then you can update the ports listed above normally. @@ -1702,8 +1702,8 @@ you update your ports collection, before attempting any port upgrades. shared library versions have been bumped (ogg.6 to ogg.7, ao.3 to ao.4). All ports that have an identifiable direct dependency on these libraries - have had their PORTREVISIONs bumped. However, some ports that pull in - the libraries indirectly may continue to look for the old versions. To + have had their PORTREVISIONs bumped. However, some ports that pull in + the libraries indirectly may continue to look for the old versions. To ensure that all are updated, perform this step: If you use portupgrade: @@ -1719,7 +1719,7 @@ you update your ports collection, before attempting any port upgrades. multimedia/gstreamer-plugins-bad AUTHOR: kwm@FreeBSD.org - Certain plugins were moved from the -bad port to the -good port. Please + Certain plugins were moved from the -bad port to the -good port. Please follow instructions below before proceeding with normal update steps: If you use portmaster: @@ -1735,7 +1735,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: romain@FreeBSD.org Starting with Mono 2.6, the Moonlight compiler and assemblies are not - installed by the lang/mono port anymore. They are however provided by + installed by the lang/mono port anymore. They are however provided by the multimedia/moonlight port. If you are doing some Silverlight development, install multimedia/moonlight @@ -1749,13 +1749,13 @@ you update your ports collection, before attempting any port upgrades. bump (from intl.8 to intl.9), so: All ports that have an identifiable known direct dependency on gettext - have had their PORTREVISIONs bumped. If after upgrading: + have had their PORTREVISIONs bumped. If after upgrading: # portupgrade -rf gettext # portmaster -w -r gettext The upgrade of devel/gobject-introspection may fail because it is looking - for libintl.so.8. In this case, do the following: + for libintl.so.8. In this case, do the following: # cd /usr/ports/devel/gobject-introspection # make clean @@ -1801,7 +1801,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: pgj@FreeBSD.org The following Haskell ports have been renamed in order to bring them in - sync with the naming scheme used at HackageDB. Please follow these steps + sync with the naming scheme used at HackageDB. Please follow these steps below to update your installation: 1) Delete the following ports (if you have any of them installed): @@ -1831,7 +1831,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: mva@FreeBSD.org The pylint user configuration files have been changed slightly in newer - versions (>=0.20.0). In some cases, older configurations might crash + versions (>=0.20.0). In some cases, older configurations might crash pylint at startup. If you run into startup problems, make sure you remove the .pylintrc @@ -1913,7 +1913,7 @@ you update your ports collection, before attempting any port upgrades. WITH_QT_PHONON global knob has been introduced to allow selection between multimedia/qt4-phonon* ports (a bit outdated Phonon, which is shipped with - Qt4) and multimedia/phonon* ports. Since KDE SC 4.4 requires fresh Phonon, + Qt4) and multimedia/phonon* ports. Since KDE SC 4.4 requires fresh Phonon, multimedia/phonon* ports are installed by default. If you don't use KDE, you may set WITH_QT_PHONON=yes in /etc/make.conf @@ -1937,7 +1937,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of security/gnome-keyring AUTHOR: kwm@FreeBSD.org - libgnome-keyring was split out of the gnome-keyring package. Perform the + libgnome-keyring was split out of the gnome-keyring package. Perform the following before doing your normal upgrade steps: pkg_delete -f "gnome-keyring-*" @@ -1953,12 +1953,12 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: glarkin@FreeBSD.org The nullmailer port was recently updated with an rc.d script to correctly - daemonize nullmailer-send with daemon(8). On FreeBSD 6.X, daemon(8) does + daemonize nullmailer-send with daemon(8). On FreeBSD 6.X, daemon(8) does not support "[-u user]" command-line switch, causing the nullmailer rc.d script failure to start nullmailer-send. Support for "[-u user]" command-line switch was recently MFC'd to 6-STABLE - (http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/146266). FreeBSD 6.X users + (http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/146266). FreeBSD 6.X users should patch and install daemon(8) by one of the methods described below. If /usr/src is not yet populated, csup the 6-STABLE sources and run these @@ -1996,7 +1996,7 @@ you update your ports collection, before attempting any port upgrades. Please check whether you need to define any of these variables in your squid.conf to the old defaults explicitly before updating, especially if - you have set up automated log processing or automated log rotation. If you + you have set up automated log processing or automated log rotation. If you define pid_filename in your squid.conf, you should also set squid_pidfile to the same value in /etc/rc.conf, cf. $PREFIX/etc/rc.d/squid. @@ -2004,8 +2004,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of math/libgmp4 AUTHOR: ale@FreeBSD.org - The default gmp version in FreeBSD is now 5.0.x. The port directory - changed from math/libgmp4 to math/gmp. An entry has been added to MOVED + The default gmp version in FreeBSD is now 5.0.x. The port directory + changed from math/libgmp4 to math/gmp. An entry has been added to MOVED and all depending ports revisions have been bumped, so the update should be handled correctly by usual port management tools such as portupgrade. @@ -2019,7 +2019,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: ale@FreeBSD.org As of PHP 5.3, a few extensions were removed from or included into the core - PHP5 package. Follow the steps below to update your installation. + PHP5 package. Follow the steps below to update your installation. 1) Delete the following packages (if installed): @@ -2048,7 +2048,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of gstreamer-plugins-bad and gstreamer-plugins-good AUTHOR: kwm@FreeBSD.org - Plugin moved from the -bad port to the -good port. Please follow the + Plugin moved from the -bad port to the -good port. Please follow the instructions below before proceeding with normal update steps. If you use portmaster: @@ -2063,7 +2063,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of graphics/png AUTHOR: dinoex@FreeBSD.org - The PNG library has been updated to version 1.4.1. Please rebuild all + The PNG library has been updated to version 1.4.1. Please rebuild all ports that depend on it. If you use portmaster: make sure you update to portmaster version 2.20 or @@ -2094,7 +2094,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: dvl@FreeBSD.org Bacula 5.x uses new shared objects which conflict with the shared objects - from previous versions. You should delete all existing Bacula packages + from previous versions. You should delete all existing Bacula packages from your system before compiling Bacula 5.x, otherwise you'll encounter compilation errors. @@ -2123,18 +2123,18 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/firefox AUTHORS: beat@FreeBSD.org, mandree@FreeBSD.org (Java plugin) - The www/firefox port has been updated to 3.6. From now on www/firefox - will contain the most recent version of Firefox. Older but still + The www/firefox port has been updated to 3.6. From now on www/firefox + will contain the most recent version of Firefox. Older but still supported releases will be available in www/firefox3 and www/firefox35. In order to update to Firefox 3.6 please delete your older installed - version of Firefox first and install www/firefox afterwards. Please + version of Firefox first and install www/firefox afterwards. Please make sure all your addons are compatible with Firefox 3.6 and backup your ~/.mozilla directory prior to the first launch of Firefox 3.6. Note that in order to use Java with Firefox 3.6, you need to install java/openjdk6, build it with the "WEB" option enabled and use the Iced - Tea plugin. To achieve the latter, each user needs to create a + Tea plugin. To achieve the latter, each user needs to create a symlink to the Icedtea plugin as described in the Browsers/Firefox and Java[tm] Plugin section in the handbook: @@ -2148,15 +2148,15 @@ you update your ports collection, before attempting any port upgrades. If you want to use Mesa3D 7.6.1 and libdrm 2.4.17 rather than 7.4.4 and 2.4.12, you must define WITHOUT_NOUVEAU global macro, at least, enabled on graphics/libGL*, graphics/libglut, graphics/dri, - graphics/mesa-demos, and graphics/libdrm. And please give up using + graphics/mesa-demos, and graphics/libdrm. And please give up using x11-drivers/xf86-video-nouveau. At this time, I cannot enable latest Mesa3D and libdrm, because they - break xf86-video-nouveau. But old (current?) Mesa3D and libdrm do not + break xf86-video-nouveau. But old (current?) Mesa3D and libdrm do not break any drivers. AMD Radeon HD 2xxx/3xxx/4xxx users: If you use AMD Radeon HD [234]xxx - series, please define WITHOUT_NOUVEAU global macro. You can then use + series, please define WITHOUT_NOUVEAU global macro. You can then use OpenGL Hardware Accelerator feature on these series. 20100206: @@ -2164,7 +2164,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: timur@FreeBSD.org Default configuration file was moved to ${LOCALBASE}/etc/smb4.conf to - avoid conflicts with the installed net/samba3?. Also, userland utils + avoid conflicts with the installed net/samba3?. Also, userland utils are not installed by default, which should also help with the parallel setup of Samba3 and Samba4. @@ -2174,7 +2174,7 @@ you update your ports collection, before attempting any port upgrades. When building qt33 and kdelibs3 (at least), while they are installed, because of -L/usr/local/lib being passed too soon, the currently installed - libraries are used instead of the ones from the build. This makes the + libraries are used instead of the ones from the build. This makes the build fail if you updated any of the libraries these Qt/KDE libraries are linked against (e.g. libjpeg). @@ -2258,9 +2258,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: gnome@FreeBSD.org Due to a recent change in sysutils/policykit, both sysutils/policykit, - and sysutils/polkit need to be rebuilt, but in a certain order. First, - upgrade sysutils/policykit to 0.9_6. Then, force rebuild and reinstall - of sysutils/polkit. If you do not do this, applications which depend + and sysutils/polkit need to be rebuilt, but in a certain order. First, + upgrade sysutils/policykit to 0.9_6. Then, force rebuild and reinstall + of sysutils/polkit. If you do not do this, applications which depend on polkitd will fail. 20100113: @@ -2268,7 +2268,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: beat@FreeBSD.org Port has been renamed to emulators/virtualbox-ose to reflect that we are - using the OSE version. A separate port for the kernel modules has been + using the OSE version. A separate port for the kernel modules has been created: emulators/virtualbox-ose-kmod. Please see http://wiki.freebsd.org/VirtualBox for update instructions. @@ -2333,9 +2333,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: avl@FreeBSD.org Grdc has been renamed to Remmina upstream, and the port was also renamed - to reflect this. After installing remmina port you will need to download + to reflect this. After installing remmina port you will need to download the ``grdc2remmina.sh'' script and run it as your normal user(s) that - have ~/.grdc. The script will only create ~/.remmina directory and move + have ~/.grdc. The script will only create ~/.remmina directory and move grdc config files to the new path; it does not affect anything else. $ fetch http://people.freebsd.org/~avl/script/grdc2remmina.sh @@ -2347,16 +2347,16 @@ you update your ports collection, before attempting any port upgrades. In order to simplify configuration and better separate the different components of Zabbix, the former zabbix port has been split into three: - zabbix-server, zabbix-proxy, and zabbix-frontend. Each component has + zabbix-server, zabbix-proxy, and zabbix-frontend. Each component has distinct functionality and may be installed independently on separate - systems. The existing zabbix-agent port remains. + systems. The existing zabbix-agent port remains. Additionally, the new zabbix-frontend port now (correctly) installs the - PHP frontend in PREFIX/www/zabbix. The old zabbix port installed the - files in PREFIX/share/zabbix/php. Web server configurations must be + PHP frontend in PREFIX/www/zabbix. The old zabbix port installed the + files in PREFIX/share/zabbix/php. Web server configurations must be updated accordingly. - Finally, Zabbix has been updated to version 1.8. Not everyone may be + Finally, Zabbix has been updated to version 1.8. Not everyone may be able to upgrade from version 1.6 immediately, though, so 1.6.8 versions of the ports are also available as zabbix16-server, zabbix16-proxy, zabbix16-agent, and zabbix16-frontend. @@ -2368,10 +2368,10 @@ you update your ports collection, before attempting any port upgrades. The port has been updated to 0.11.1, which no longer enables kqemu by default (if built with KQEMU knob on), now you also have to explicitly pass -enable-kqemu (or -kernel-kqemu as with the previous versions) - if you want to use it. Also note the 0.11 stable branch is the last + if you want to use it. Also note the 0.11 stable branch is the last qemu branch that still supports kqemu, so if you depend on reasonably fast emulation on FreeBSD you should start looking for alternatives - some time soon. (VirtualBox?) + some time soon. (VirtualBox?) 20091120: AFFECTS: users of mail/postfixadmin @@ -2385,9 +2385,9 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of security/f-prot AUTHOR: Tim Bishop <tdb@FreeBSD.org> - The main f-prot command is now named fpscan. Virus definitions are - updated using the fpupdate command. fpupdate will automatically run - from periodic every day. To disable set the following option in + The main f-prot command is now named fpscan. Virus definitions are + updated using the fpupdate command. fpupdate will automatically run + from periodic every day. To disable set the following option in /etc/periodic.conf: fpupdate_enable="NO" @@ -2407,7 +2407,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Bernhard Froehlich <decke@bluelife.at> After the upgrade you need to generate a session secret before restarting - the application. This is to protect you from cross-site request forgery. + the application. This is to protect you from cross-site request forgery. From your Redmine directory, simply run the following command once: # rake config/initializers/session_store.rb @@ -2421,7 +2421,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Mario S F Ferreira <lioux@FreeBSD.org> The new port now depends on emulators/kqemu-kmod instead of installing - its own version. Therefore, you should make sure that no other kqemu.ko + its own version. Therefore, you should make sure that no other kqemu.ko modules are installed: # pkg_delete -f win4bsd\* @@ -2441,7 +2441,7 @@ you update your ports collection, before attempting any port upgrades. which differ from those in earlier 5.4 releases. You should discard the old InnoDB log files and let MySQL 5.4.3 create - new ones. It is necessary to shut down your current server cleanly so + new ones. It is necessary to shut down your current server cleanly so that no outstanding transaction information remains in the log. See here: http://dev.mysql.com/doc/refman/5.4/en/news-5-4-3.html @@ -2451,7 +2451,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Alexander Logvinov <avl@FreeBSD.org> Since SourceForge switched to the new File Release System, - mail/heirloom-mailx has wrong package name. All users who have + mail/heirloom-mailx has wrong package name. All users who have mail/heirloom-mailx installed after 22 August 2009 should run the following commands: @@ -2467,7 +2467,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Christian Weisgerber <naddy@FreeBSD.org> The XZ Utils distribution has superseded LZMA Utils, so the xz port has - been added and the lzmautils ports have been removed. To perform the + been added and the lzmautils ports have been removed. To perform the move, run one of the following commands: If using portupgrade: @@ -2487,7 +2487,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Sahil Tandon <sahil@tandon.net> The recipient rate-limiting feature is now called via rcpt() command - instead of with mrcpt() as in previous versions. Make sure to update + instead of with mrcpt() as in previous versions. Make sure to update your postfwd.conf if you use this feature. 20090917: @@ -2496,12 +2496,12 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: gnome@FreeBSD.org The default Gecko provider has been changed from www/firefox to - www/libxul. Firefox 2.x is now marked FORBIDDEN for security reasons, - and libxul is new, stable, and preferred Gecko provider. Libxul uses + www/libxul. Firefox 2.x is now marked FORBIDDEN for security reasons, + and libxul is new, stable, and preferred Gecko provider. Libxul uses the same Gecko engine as Firefox 3.0.x. Some ports may fail to upgrade or run when both www/firefox and libxul - are installed on the same system. To make sure everything runs smoothly, + are installed on the same system. To make sure everything runs smoothly, uninstall www/firefox, then install libxul, then upgrade the affected ports. @@ -2513,8 +2513,8 @@ you update your ports collection, before attempting any port upgrades. https://oss.gonicus.de/labs/gosa/wiki/DocumentationInstallingUpdatingGOsa - before upgrading this port. And don't forget to check your slapd.conf - because gosa scheme files were changed. Should you have any problems + before upgrading this port. And don't forget to check your slapd.conf + because gosa scheme files were changed. Should you have any problems during LDAP migration step, try to restart your PHP process. 20090913: @@ -2535,9 +2535,9 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.10 AUTHOR: skv@FreeBSD.org - lang/perl5.10 has been updated to 5.10.1. You should update everything - that depends on perl. The easiest way to do that is to use - "perl-after-upgrade" script supplied with lang/perl5.10. Please see its + lang/perl5.10 has been updated to 5.10.1. You should update everything + that depends on perl. The easiest way to do that is to use + "perl-after-upgrade" script supplied with lang/perl5.10. Please see its manual page for details. If you want to switch to lang/perl5.10 from lang/perl5.8 please follow @@ -2547,7 +2547,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/rubygem-rails AUTHOR: pgollucci@FreeBSD.org - Rails has been updated to 2.3.4. As always, make sure you check the + Rails has been updated to 2.3.4. As always, make sure you check the changes at http://weblog.rubyonrails.org/. 20090909: @@ -2579,7 +2579,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: yds@CoolRat.org dovecot-sieve has been updated to a new implementation compatible with - dovecot 1.2.x. For details of what this means please refer to: + dovecot 1.2.x. For details of what this means please refer to: http://wiki.dovecot.org/LDA/Sieve/Dovecot#Migration_from_CMUSieve @@ -2587,7 +2587,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/mediawiki AUTHOR: miwi@FreeBSD.org - www/mediawiki version is 1.15.1 now. 1.14.1 version was preserved as + www/mediawiki version is 1.15.1 now. 1.14.1 version was preserved as www/mediawiki114 port. 20090818: @@ -2595,8 +2595,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: novel@FreeBSD.org GnuTLS has been updated to 2.8.3 and all shared libraries' versions have - been bumped. So you need to rebuild all applications that depend on - gnutls. Do something like: + been bumped. So you need to rebuild all applications that depend on + gnutls. Do something like: portupgrade -rf gnutls @@ -2605,27 +2605,27 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: danfe@FreeBSD.org Celestia can now be compiled with KDE3 frontend (you can enable it with - CELESTIA_UI=kde when building). It is very feature-rich, as it offers + CELESTIA_UI=kde when building). It is very feature-rich, as it offers contextual menus, toolbars, KDE integration, internationalization, - bookmarks, etc. If you use Celestia and KDE as your desktop, you might + bookmarks, etc. If you use Celestia and KDE as your desktop, you might want to rebuild the port so it integrates into your environment better. 20090815: AFFECTS: users of mail/dovecot AUTHOR: wxs@FreeBSD.org - Dovecot has been updated to version 1.2.3. The configuration file has - changed significantly. Please see http://wiki.dovecot.org/Upgrading/1.2 + Dovecot has been updated to version 1.2.3. The configuration file has + changed significantly. Please see http://wiki.dovecot.org/Upgrading/1.2 for details of what this means. 20090804: AFFECTS: users of multimedia/phonon*, x11/kdebase4*, deskutils/kdepim4 AUTHOR: kde@FreeBSD.org - KDE4 has been updated to version 4.3.0. KDE now uses qt4-phonon; + KDE4 has been updated to version 4.3.0. KDE now uses qt4-phonon; multimedia/phonon and multimedia/phonon-gstreamer are deprecated in - favor of their qt4 equivalents. You can still use multimedia/phonon-xine - however. A number of files have been moved between packages. The + favor of their qt4 equivalents. You can still use multimedia/phonon-xine + however. A number of files have been moved between packages. The recommended update procedure is to delete phonon, phonon-gstreamer, kdebase-*4*, kdepim-4*, then update ports as usual and install desired KDE4 ports: @@ -2638,7 +2638,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of devel/dbus-qt4, devel/qt4-designer AUTHOR: kde@FreeBSD.org - Qt4 ports have been updated to 4.5.2. The recommended update procedure + Qt4 ports have been updated to 4.5.2. The recommended update procedure is to delete qt4-dbus and qt4-designer, then update ports as usual. Install qt4-designer if needed. @@ -2668,9 +2668,9 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of x11-drivers/xf86-video-nouveau AUTHOR: rnoland@FreeBSD.org - An updated libdrm and xf86-video-nouveau have been committed. These + An updated libdrm and xf86-video-nouveau have been committed. These update the API version to 0.0.14 and if you are using DRM you will need - to update your kernel patch. See pkg-message in xf86-video-nouveau for + to update your kernel patch. See pkg-message in xf86-video-nouveau for details. 20090730: @@ -2678,7 +2678,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: ale@FreeBSD.org Tomcat has been updated to 6.0.20 release and the installation directory - is changed from apache-tomcat6.0 to apache-tomcat-6.0. Backup your + is changed from apache-tomcat6.0 to apache-tomcat-6.0. Backup your configuration files before updating Tomcat, since the previous port will delete them on deinstall. @@ -2686,8 +2686,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of sysutils/heartbeat AUTHOR: ports@encarnate.com - Heartbeat has been upgraded to the 2.1.4 release. Older configurations - based on version 1 should still work. Read more about the new features + Heartbeat has been upgraded to the 2.1.4 release. Older configurations + based on version 1 should still work. Read more about the new features and possible configuration changes at the following URLs: http://clusterlabs.org/wiki/Documentation (Configuration 0.6 Explained) @@ -2697,7 +2697,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/rubygem-rails AUTHOR: pgollucci@FreeBSD.org - Rails has been updated to 2.3.3. As always, make sure you check the + Rails has been updated to 2.3.3. As always, make sure you check the changes at http://weblog.rubyonrails.org/. 20090720: @@ -2705,8 +2705,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: delphij@FreeBSD.org OpenLDAP has been upgraded to 2.4.17, which requires a shared library - version bump. Therefore, you need to reinstall all ports that depend on - it. Please do something like: + version bump. Therefore, you need to reinstall all ports that depend on + it. Please do something like: # portupgrade -fr net/openldap24-client or @@ -2716,7 +2716,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of graphics/jpeg AUTHOR: dinoex@FreeBSD.org - The IJG jpeg library has been updated to version 7.0. Please rebuild all + The IJG jpeg library has been updated to version 7.0. Please rebuild all ports that depend on it. If you use portmaster: @@ -2821,7 +2821,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: gahr@FreeBSD.org The development version of the Enlightenment window manager, a.k.a. E17, - was moved from x11-wm/enlightenment-devel to x11-wm/enlightenment. The + was moved from x11-wm/enlightenment-devel to x11-wm/enlightenment. The DR16 branch now resides in x11-wm/e16. 20090615: @@ -2829,7 +2829,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: beat@FreeBSD.org The multimedia/mlt++ port was incorporated into multimedia/mlt since - version 0.4.2. Delete multimedia/mlt++ first and then install/update + version 0.4.2. Delete multimedia/mlt++ first and then install/update multimedia/mlt. 20090613: @@ -2837,13 +2837,13 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: hq@FreeBSD.org Hudson is now running as a standalone process and no longer relies on - Apache Tomcat. As such, it should now be configured by defining - hudson_* variables in rc.conf. See comments from rc.d script for further + Apache Tomcat. As such, it should now be configured by defining + hudson_* variables in rc.conf. See comments from rc.d script for further details. The default setup is using the same port numbers and HTTP URL prefix as - before in order to reduce the effort of upgrading the port. Hence, it - may conflict with some running Apache Tomcat instance. To fix this + before in order to reduce the effort of upgrading the port. Hence, it + may conflict with some running Apache Tomcat instance. To fix this problem, you may either deinstall www/tomcat6, or use the following settings in hudson_args from /etc/rc.conf: @@ -2901,7 +2901,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: glewis@FreeBSD.org The update to 3.4.2 changes the location of the metadata for eclipse to - be more in line with what is used on other platforms. This means that + be more in line with what is used on other platforms. This means that after the update plugins that have been installed by a user with the built in Update Manager will need to be reinstalled. @@ -2910,7 +2910,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: itetcu@FreeBSD.org Version 2.6.1 introduced a POLA violation by expecting aliases.db to be - in /etc/mail/aliases.db (not /etc/aliases.db). With this version the + in /etc/mail/aliases.db (not /etc/aliases.db). With this version the location is reverted to the right place. If you updated your installation to 2.6.1 you need to run newaliases(1) @@ -2922,11 +2922,11 @@ you update your ports collection, before attempting any port upgrades. IPAUIGothic has been updated to a version included in IPA font version 002.03 and added as a separated port - "japanese/font-ipa-uigothic". And the font-mplus-ipa has been + "japanese/font-ipa-uigothic". And the font-mplus-ipa has been updated to remove the old IPAUIGothic. Thus the old ipa-ttfonts is almost equivalent to font-ipa + - font-ipa-uigothic + font-mplus-ipa. Note that these three packages + font-ipa-uigothic + font-mplus-ipa. Note that these three packages have different licenses from each other. 20090601: @@ -2942,7 +2942,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: pgollucci@FreeBSD.org viewvc.conf and templates are not compatible to 1.0.x version, even the - database scripts have changed. For details see: + database scripts have changed. For details see: http://viewvc.tigris.org/source/browse/*checkout*/viewvc/trunk/docs/upgrading-howto.html @@ -2972,7 +2972,7 @@ you update your ports collection, before attempting any port upgrades. with "TTF". Also, japanese/font-std and chinese/font-std have been added as - standard fonts used in the Ports Collection. Currently they + standard fonts used in the Ports Collection. Currently they contain: std.ja_JP/Mincho @@ -2984,13 +2984,13 @@ you update your ports collection, before attempting any port upgrades. std.zh_CN/MSung-Light std.zh_CN/MHei-Medium - under ${PREFIX}/share/fonts/. They are just symlinks to - corresponding font files. The symlink names are based on popular + under ${PREFIX}/share/fonts/. They are just symlinks to + corresponding font files. The symlink names are based on popular PostScript font names. Applications should refer the font files via XLFD or fontconfig - first. If they need a direct reference to the font file, please use - files in std.*/*. This is because direct reference to a specific + first. If they need a direct reference to the font file, please use + files in std.*/*. This is because direct reference to a specific font name in an application configuration file makes the maintenance difficult when the font file name is changed, for example. @@ -3006,14 +3006,14 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of print/cups-base and portupgrade AUTHOR: dinoex@FreeBSD.org - The print/cups port has been split into multiple ports. If upgrading + The print/cups port has been split into multiple ports. If upgrading from 1.3.10_1 and below, you must remove the installed version first. 20090412: AFFECTS: users of sysutils/bacula-server AUTHOR: wxs@FreeBSD.org - sysutils/bacula-server now uses a new catalog format. If upgrading + sysutils/bacula-server now uses a new catalog format. If upgrading from the old version please use the update_bacula_tables script provided with the port before restarting bacula. @@ -3023,7 +3023,7 @@ you update your ports collection, before attempting any port upgrades. bin/email2trac.py and bin/delete_spam.py are now installed without the .py extension to make the suid run_email2trac work and match the online - documentation. If you were using them in scripts or alias entries, you + documentation. If you were using them in scripts or alias entries, you will need to update paths accordingly. 20090401: @@ -3074,7 +3074,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: garga@FreeBSD.org After version 0.95 clamav-milter does not accept parameters by command - line. If you are using $clamav_milter_flags on rc.conf to set its + line. If you are using $clamav_milter_flags on rc.conf to set its parameters you will need to move to new ${PREFIX}/etc/clamav-milter.conf. 20090319: @@ -3122,8 +3122,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of sysutils/lire AUTHOR: edwin@FreeBSD.org - Lire now requires DBD::SQLite, which uses SQLite 3.0. This means that the - Lire database format has changed. If you have one or more old Lire stores, + Lire now requires DBD::SQLite, which uses SQLite 3.0. This means that the + Lire database format has changed. If you have one or more old Lire stores, you will need to convert each of them from SQLite2 format to SQLite3 like this: @@ -3160,10 +3160,10 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: stas@FreeBSD.org FreeBSD libusb20 was renamed to libusb in r189585 and thus, being fully - compatible with libusb20, replaces devel/libusb on HEAD. devel/libusb - should not be used on these systems. Users of libusb-dependent ports + compatible with libusb20, replaces devel/libusb on HEAD. devel/libusb + should not be used on these systems. Users of libusb-dependent ports are advised to remove libusb package from their systems, and rebuild all - libusb dependencies. One of the possible ways to achieve this is + libusb dependencies. One of the possible ways to achieve this is listed below: # set tempfile=`mktemp /tmp/usbports.XX` @@ -3177,7 +3177,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: kde@FreeBSD.org multimedia/phonon port has been split into phonon itself, phonon-xine, - and phonon-gstreamer backends. After updating phonon port you have + and phonon-gstreamer backends. After updating phonon port you have to install at least one backend; phonon-xine backend is recommended for KDE. @@ -3187,7 +3187,7 @@ you update your ports collection, before attempting any port upgrades. The port has been updated to 0.10.0, which now uses the newer (incompatible) kqemu-kmod-devel port that now also works for the - 32 bit "qemu" executable on amd64. If you upgrade emulators/qemu + 32 bit "qemu" executable on amd64. If you upgrade emulators/qemu with the KQEMU knob on, you have to # pkg_delete kqemu-kmod-1\* @@ -3220,12 +3220,12 @@ you update your ports collection, before attempting any port upgrades. Please also note that Xfce 4.6 does not come with an icon theme any more. Xfce 4.6 now depends on the Tango theme which is now installed by default. The default installation of Xfce is also adjusted to use this icon theme - instead of the Xfce 4.4 standard Rodent theme. If you are upgrading from - Xfce 4.4 to 4.6 you probably still have the Rodent theme selected. This + instead of the Xfce 4.4 standard Rodent theme. If you are upgrading from + Xfce 4.4 to 4.6 you probably still have the Rodent theme selected. This will lead to several "missing" icons when starting up Xfce. - Make sure to switch as well to the Tango theme. To do this just open the - Settings Manager and select Appearance. Inside the Appearance dialog + Make sure to switch as well to the Tango theme. To do this just open the + Settings Manager and select Appearance. Inside the Appearance dialog switch to the Icons tab and select the "Tango" entry in the list on the left side of the Icons tab. @@ -3254,7 +3254,7 @@ you update your ports collection, before attempting any port upgrades. "../../../my/script/dir/myscript.php". If the script path name is hard-coded into the application and is not - generated by user input, the vulnerability does not apply. Because of + generated by user input, the vulnerability does not apply. Because of this exception, the Zend Framework team has added a flag to disable the LFI protection in the render() method. @@ -3269,8 +3269,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: delphij@FreeBSD.org OpenLDAP has been upgraded to 2.4.14, which requires a shared library - version bump. Therefore you need to reinstall all ports that depend on - it. Please do something like: + version bump. Therefore you need to reinstall all ports that depend on + it. Please do something like: # portupgrade -fr net/openldap24-client @@ -3279,8 +3279,8 @@ you update your ports collection, before attempting any port upgrades. deskutils/kdepimlib4, deskutils/kdepim4, devel/automoc4 AUTHOR: kde@FreeBSD.org - KDE4 has been updated from 4.1.4 to 4.2.0. A number of applications - have been moved between packages. The easiest way to avoid various + KDE4 has been updated from 4.1.4 to 4.2.0. A number of applications + have been moved between packages. The easiest way to avoid various problems during update is to delete all KDE-4.1.4 ports and install KDE-4.2.0: @@ -3293,8 +3293,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: pgollucci@FreeBSD.org devel/libslang has been removed in favor of devel/libslang2 after not - being released during last five years. WITH_SLANG2 is no longer a - valid ports KNOB. All ports that depend on devel/libslang should be + being released during last five years. WITH_SLANG2 is no longer a + valid ports KNOB. All ports that depend on devel/libslang should be recompiled, e.g.: # portupgrade -o devel/libslang2 devel/libslang @@ -3312,8 +3312,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: kwm@FreeBSD.org The gstapp library moved from the gstreamer-plugins-bad package to - gstreamer-plugins. It will be necessary to rebuild the gstreamer-plugins - port. After updating your installed ports please do (if you are using + gstreamer-plugins. It will be necessary to rebuild the gstreamer-plugins + port. After updating your installed ports please do (if you are using portupgrade): # portupgrade -f gstreamer-plugins @@ -3322,7 +3322,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/xpi-deepestsender AUTHOR: pgollucci@FreeBSD.org - www/xpi-deepestsender has been updated to version 0.9.0. This version + www/xpi-deepestsender has been updated to version 0.9.0. This version is *only* for Firefox version 3.x. 20090124: @@ -3330,7 +3330,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: rnoland@FreeBSD.org sysutils/hal has been updated and should now properly detect mice for - in X.Org. Use of AllowEmptyInput should no longer be needed for most + in X.Org. Use of AllowEmptyInput should no longer be needed for most users and moused should now work fine. 20090123: @@ -3338,18 +3338,18 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: rnoland@FreeBSD.org If you are using an older xorg.conf several config lines are no longer - needed and will generate warnings when X is started. RgbPath will cause + needed and will generate warnings when X is started. RgbPath will cause X to fail to start, remove it from your config. Server 1.5.3 also really wants to configure its input devices via hald. - This is causing some issues with moused and /dev/sysmouse. There are + This is causing some issues with moused and /dev/sysmouse. There are couple of options for how to deal with it: 1. Add Option "AllowEmptyInput" "off" to your ServerLayout section. This will cause X to use the configured kbd, mouse, and vmmouse sections from your xorg.conf - 2. Don't use moused. If you want it to work with addon USB mice + 2. Don't use moused. If you want it to work with addon USB mice set this in rc.conf: moused_enable="NO" @@ -3361,7 +3361,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of x11/libxcb AUTHOR: flz@FreeBSD.org - Libxcb shared library version was bumped from 1 to 2. You need to + Libxcb shared library version was bumped from 1 to 2. You need to rebuild any consumer of libxcb.so.1 or some applications will be linked against two versions of libxcb once libX11 is upgraded. @@ -3412,7 +3412,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/ikiwiki AUTHOR: brix@FreeBSD.org - IkiWiki has been upgraded from 2.x to 3.x. Instructions for + IkiWiki has been upgraded from 2.x to 3.x. Instructions for migrating existing IkiWiki configurations to 3.x format can be found at http://ikiwiki.info/tips/upgrade_to_3.0/. @@ -3428,8 +3428,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of x11/kdebase4-workspace, x11/kdebase4-runtime AUTHOR: kde@FreeBSD.org - KDE4 has been updated from 4.1.1 to 4.1.4. A number of files have been - moved between packages. You should deinstall kdebase4-runtime package + KDE4 has been updated from 4.1.1 to 4.1.4. A number of files have been + moved between packages. You should deinstall kdebase4-runtime package before updating: pkg_delete -f kdebase-runtime-4.1\* @@ -3442,9 +3442,9 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of GNOME and GTK+ AUTHOR: gnome@FreeBSD.org - GNOME has been updated to 2.24.x. You have to deinstall a few ports + GNOME has been updated to 2.24.x. You have to deinstall a few ports first before using portupgrade or portmaster in order to successfully - upgrade your GNOME installation. After successful upgrade, you have + upgrade your GNOME installation. After successful upgrade, you have to reinstall gnome-session so the gnome.desktop session file is properly installed. @@ -3469,9 +3469,9 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of lang/perl5.8 AUTHOR: skv@FreeBSD.org - lang/perl5.8 has been updated to 5.8.9. You should update everything - that depends on perl. The easiest way to do that is to use - perl-after-upgrade script supplied with lang/perl5.8. Please see its + lang/perl5.8 has been updated to 5.8.9. You should update everything + that depends on perl. The easiest way to do that is to use + perl-after-upgrade script supplied with lang/perl5.8. Please see its manual page for details. 20090112: @@ -3479,9 +3479,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: miwi@FreeBSD.org claws-mail has been updated to 3.7.0, with this update OpenSSL support - has been removed by upstream in favour of GnuTLS. GnuTLS is now enabled - by default. Themes were have also been split to an extra port which - your can find under x11-themes/claws-mail-themes. Menu was rewritten + has been removed by upstream in favour of GnuTLS. GnuTLS is now enabled + by default. Themes were have also been split to an extra port which + your can find under x11-themes/claws-mail-themes. Menu was rewritten entirely in version 3.6.0 using modern GTK interface; as a consequence, all your custom shortcuts will be lost after upgrade. @@ -3490,22 +3490,22 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: mezz@FreeBSD.org The Java plugins now will no longer be picked up by automatically from - these browsers. Because all Java ports share the name of plugins file, + these browsers. Because all Java ports share the name of plugins file, I am thinking about someone or maybe me will need to write something similar to nspluginwrapper (but in shell script) that can add Java plugin in ~/.*/plugins/ when user requests one specific version of Java plugin - if this user has more than one version of Java installed. However, for + if this user has more than one version of Java installed. However, for now, you will have to add Java plugin in ~/.*/plugins/ manually. 20090107: AFFECTS: users of databases/unixODBC AUTHOR: beech@FreeBSD.org - The databases/unixODBC port has been updated to 2.2.14. While + The databases/unixODBC port has been updated to 2.2.14. While containing many bug fixes and minor feature adjustments, this version - no longer ships with the (obsolete) MySQL ODBC driver. MySQL ODBC + no longer ships with the (obsolete) MySQL ODBC driver. MySQL ODBC driver users will probably want to use databases/mysql-connector-odbc - instead. The text-backed/flatfile driver (libtxtodbc) has also been + instead. The text-backed/flatfile driver (libtxtodbc) has also been removed by the developers but due to some demand may make a return in a future version or as a separate port. @@ -3514,7 +3514,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: rafan@FreeBSD.org libgcrypt has been upgraded to 1.4.3 which has a shared library version - bump. You need to reinstall all ports that depend on it. Use something + bump. You need to reinstall all ports that depend on it. Use something like this: portupgrade -rf libgcrypt @@ -3525,8 +3525,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: delphij@FreeBSD.org OpenLDAP has been upgraded to 2.4.13, which requires a shared library - version bump. Therefore, you need to reinstall all ports that depend on - it. Please do something like: + version bump. Therefore, you need to reinstall all ports that depend on + it. Please do something like: # portupgrade -fr net/openldap24-client @@ -3547,7 +3547,7 @@ you update your ports collection, before attempting any port upgrades. With this change, p5-RT-* and p5-RTx-* should be much simpler to use in the ports collection. - Please note that www/p5-RTx-Shredder is included in www/rt38. This + Please note that www/p5-RTx-Shredder is included in www/rt38. This port will be deprecated and removed. 20081228: @@ -3555,8 +3555,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: rene@FreeBSD.org The setiathome client has been updated to version 6.03 and version 5.00 - of the astropulse client has been added. Before you update, finish and - report your current workunits to avoid losing them. The port now also + of the astropulse client has been added. Before you update, finish and + report your current workunits to avoid losing them. The port now also includes the client screensavers. 20081228: @@ -3564,14 +3564,14 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: hrs@FreeBSD.org The Wnn backend of japanese/kinput2 port now uses unix domain socket - to communicate the server by default. If $JSERVER environment - variable is defined, the value is used as the server host name. In + to communicate the server by default. If $JSERVER environment + variable is defined, the value is used as the server host name. In In short, the server name is determined in the following way: $JSERVER --(if null)--> CcWnn.Jserver --(if null)--> "localhost" If the server host name is null or matches "^unix$", unix domain - socket is used. Note that the default server name in CcWnn.Jserver + socket is used. Note that the default server name in CcWnn.Jserver is "unix" now. 20081226: @@ -3579,7 +3579,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: pgollucci@FreeBSD.org www/rt2 www/rt3 www/rt32 www/rt34 are now deprecated and will expire - 2009-02-01. All ports now depend on www/rt38 If you can not update + 2009-02-01. All ports now depend on www/rt38 If you can not update to www/rt38, www/rt36 is still around. 20081224: @@ -3602,7 +3602,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: pav@FreeBSD.org, itetcu@FreeBSD.org, ale@FreeBSD.org As of PHP 5.2.7, pcre extension is distributed with the core PHP5 package, - and not as a standalone module anymore. Follow the steps below to update + and not as a standalone module anymore. Follow the steps below to update your installation. Portupgrade users: @@ -3674,15 +3674,15 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: hrs@FreeBSD.org The Wnn backend of editors/tamago port now uses unix domain socket - to communicate the server by default. If $[CJKT]SERVER environment - variable is defined, the value is used as the server host name. In + to communicate the server by default. If $[CJKT]SERVER environment + variable is defined, the value is used as the server host name. In JSERVER case, for example, the server name is determined in the following way: $JSERVER --(if null)--> wnn-jserver --(if null)--> "unix" If the server host name is null or matches "^unix$", unix domain - socket is used. The path name of the socket can be specified in + socket is used. The path name of the socket can be specified in wnn-[cjkt]udpath custom variable. 20081105: @@ -3698,7 +3698,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: wxs@FreeBSD.org The location of git-shell has changed to - ${PREFIX}/libexec/git-core/git-shell. Please remove the old entry from + ${PREFIX}/libexec/git-core/git-shell. Please remove the old entry from /etc/shells. 20081030: @@ -3706,7 +3706,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: hrs@FreeBSD.org The jserver daemon in japanese/FreeWnn-server port now uses "127.0.0.1" - as the default listen address for security reason. If you need + as the default listen address for security reason. If you need the wildcard address (INADDR_ANY), you have to explicitly set "listenaddr" to 0.0.0.0 in ${PREFIX}/lib/wnn/ja_JP/jserverrc or add "-a 0.0.0.0" to ${wnn_flags} in /etc/rc.conf. @@ -3761,7 +3761,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: hrs@FreeBSD.org The sj3serv daemon in japanese/sj3-server port now uses "localhost" - as the default listen address for security reason. If you need + as the default listen address for security reason. If you need the wildcard address (INADDR_ANY), you have to explicitly set "servername" to 0.0.0.0 in ${PREFIX}/etc/sj3/serverrc. @@ -3784,7 +3784,7 @@ you update your ports collection, before attempting any port upgrades. http://www.squid-cache.org/mail-archive/squid-dev/200809/0067.html The corresponding port configuration option WITH_SQUID_COSS is still - available but is a no-op for now. If you currently use COSS storage with + available but is a no-op for now. If you currently use COSS storage with Squid 3.0 you need to disable it in squid.conf. 20080924: @@ -3792,7 +3792,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: beech@FreeBSD.org proftpd now stores its .delay and .scoreboard files in /var/run/proftpd - instead of /var/run. If you are updating an existing installation, + instead of /var/run. If you are updating an existing installation, adjust the following in /usr/local/etc/proftpd.conf: ScoreboardFile /var/run/proftpd/proftpd.scoreboard @@ -3806,7 +3806,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: glarkin@FreeBSD.org logcheck now stores its configuration files in /usr/local/etc/logcheck - instead of /usr/local/etc. If you are upgrading the port from version + instead of /usr/local/etc. If you are upgrading the port from version 1.1.1 to version 1.2.54, copy the following files to a temporary location, in case they are removed during the upgrade: @@ -3840,7 +3840,7 @@ you update your ports collection, before attempting any port upgrades. Also note that the upgraded port installs a crontab file for user "logcheck" that executes the logcheck script every hour and emails - the results to root. If the installation process cannot install + the results to root. If the installation process cannot install the crontab file, it can be installed manually from /usr/local/share/examples/logcheck/crontab.in, e.g.: @@ -3850,14 +3850,14 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/mediawiki AUTHOR: miwi@FreeBSD.org - www/mediawiki version is 1.13 now. 1.12 version was preserved as + www/mediawiki version is 1.13 now. 1.12 version was preserved as www/mediawiki12 port. 20080902: AFFECTS: users of net-mgmt/nagios and net-mgmt/nagios-devel AUTHOR: Jarrod Sayers <jarrod@netleader.com.au> - The stable Nagios port has now been updated to version 3.0.3. Upgrading + The stable Nagios port has now been updated to version 3.0.3. Upgrading to this version shouldn't require any configuration changes, but note that most sample configuration files were moved into objects/ directory. @@ -3893,7 +3893,7 @@ you update your ports collection, before attempting any port upgrades. function instead). proc rangebar has been renamed proc boxplot and there are major - functionality changes. Any script that uses proc rangebar will need + functionality changes. Any script that uses proc rangebar will need maintenance. See http://ploticus.sourceforge.net/doc/news.html for more information. @@ -3903,8 +3903,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: dougb@FreeBSD.org These two ports have been removed in favor of the new mail/alpine and - editors/pico-alpine ports. UW discontinued work on Pine in September - 2005 and is focusing on Alpine now. You should be able to directly + editors/pico-alpine ports. UW discontinued work on Pine in September + 2005 and is focusing on Alpine now. You should be able to directly replace pine with alpine. See http://www.washington.edu/alpine/ for more information. @@ -3914,7 +3914,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: lth@FreeBSD.org Smokeping has been updated to 2.4.1, and the example web server - configuration has changed. Please read pkg-message and check that + configuration has changed. Please read pkg-message and check that your server configuration is OK. 20080827: @@ -3923,7 +3923,7 @@ you update your ports collection, before attempting any port upgrades. With the default Makefile settings, most of the programs are now installed outside your $PATH, except for "git", "gitk", and some server - side programs that need to be accessible for technical reasons. Invoking + side programs that need to be accessible for technical reasons. Invoking a git subcommand as "git-xyzzy" from the command line has been deprecated since early 2006 (and officially announced in 1.5.4 release notes); use of them from your scripts after adding output from "git --exec-path" to @@ -3955,11 +3955,11 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of net/rabbitmq AUTHOR: pneumann@gmail.com - The database schema has changed in this version of RabbitMQ. If you + The database schema has changed in this version of RabbitMQ. If you attempt to start RabbitMQ-1.4.0 over top of a previous installation, - it will fail, citing "schema_integrity_check_failed". To correct this, + it will fail, citing "schema_integrity_check_failed". To correct this, delete your mnesia directory (/var/db/rabbitmq/mnesia) and restart - the server. Note that this will destroy all your durable exchanges and + the server. Note that this will destroy all your durable exchanges and queues, and all your persisted messages! 20080816: @@ -3968,15 +3968,15 @@ you update your ports collection, before attempting any port upgrades. The periodic(8) script no longer outputs to files in the assp directory. You should remove /var/db/assp/nightly.log and nightly.log.old by hand - once you are done with them. The information that was stored there will + once you are done with them. The information that was stored there will now come in your nightly system email. 20080815: AFFECTS: users of sysutils/rdiff-backup AUTHOR: vd@FreeBSD.org - sysutils/rdiff-backup has been upgraded from 1.0.5 to 1.2.0. This is - an incompatible upgrade. If you need the "old" 1.0.5, you can find it + sysutils/rdiff-backup has been upgraded from 1.0.5 to 1.2.0. This is + an incompatible upgrade. If you need the "old" 1.0.5, you can find it in sysutils/rdiff-backup10. 20080813: @@ -3984,9 +3984,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: brix@FreeBSD.org The layout of the ikiwiki.setup file has changed in a significant - way in this release. Old setup files will continue to work, but new + way in this release. Old setup files will continue to work, but new features, like the new websetup interface, require a new format - setup file. You can convert old setup files into the new format by + setup file. You can convert old setup files into the new format by running the following command for all your ikiwiki.setup files: ikiwiki-transition setupformat ikiwiki.setup @@ -3995,8 +3995,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of mail/spamdyke AUTHOR: mm@FreeBSD.org - The spamdyke port has been updated to 4.0.2. The new version is not - backwards compatible with previous versions. Please examine the new + The spamdyke port has been updated to 4.0.2. The new version is not + backwards compatible with previous versions. Please examine the new configuration file for the changes. 20080812: @@ -4043,12 +4043,12 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of devel/qt4 AUTHOR: kde@FreeBSD.org - The qt4 ports has been updated to 4.4.1. With this update several ports - specific problems have been fixed. Qt4 headers and libraries have been - moved to include/qt4 and lib/qt4. bsd.qt.mk defines QT_INCDIR and + The qt4 ports has been updated to 4.4.1. With this update several ports + specific problems have been fixed. Qt4 headers and libraries have been + moved to include/qt4 and lib/qt4. bsd.qt.mk defines QT_INCDIR and QT_LIBDIR now, which could be used in qt4-dependent ports if required. Before you start to update your ports, please force update of qmake4 and - qt4-corelib ports. Portmaster users can do: + qt4-corelib ports. Portmaster users can do: portmaster devel/qmake4 devel/qt4-moc devel/qt4-corelib @@ -4060,7 +4060,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of devel/git AUTHOR: wxs@FreeBSD.org - Git's cvsps dependency has been switched from cvsps-devel to cvsps. The + Git's cvsps dependency has been switched from cvsps-devel to cvsps. The two are incompatible, so you will need to do the following before upgrading git: @@ -4131,7 +4131,7 @@ you update your ports collection, before attempting any port upgrades. If you are upgrading from a prior version of ojs2, please backup your database, uploaded files directory, and your config.inc.php before the - upgrade. Read /usr/local/share/docs/ojs2/UPGRADE or visit + upgrade. Read /usr/local/share/docs/ojs2/UPGRADE or visit http://pkp.sfu.ca/ojs/UPGRADE for additional upgrade information. 20080721: @@ -4159,7 +4159,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of devel/anjuta AUTHOR: gnome@FreeBSD.org - Anjuta's neon dependency has been switched from neon26 to neon28. The + Anjuta's neon dependency has been switched from neon26 to neon28. The two are incompatible, so you will need to do the following to upgrade: portupgrade -o www/neon28 neon26 @@ -4175,7 +4175,7 @@ you update your ports collection, before attempting any port upgrades. The only noticeable change in the port is that the ICAP patch is no longer included; this is because this patch was unmaintained for a long - time and its use was not really recommended. Please consider moving to + time and its use was not really recommended. Please consider moving to Squid-3 (currently available as www/squid30) if you need ICAP support. Squid 2.6 is still available as www/squid26 and will probably be removed @@ -4202,7 +4202,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org> The IkiWiki editpage form now uses the raw page name, not the page title, - in its `page' CGI parameter. You will need to rebuild any existing + in its `page' CGI parameter. You will need to rebuild any existing IkiWiki installations in order to update their `edit' links to the new format. @@ -4212,7 +4212,7 @@ you update your ports collection, before attempting any port upgrades. The port has been updated to a 20080620 SVN snapshot, which uses the new (incompatible) kqemu-kmod-devel port that now also works for the - 32 bit "qemu" executable on amd64. If you upgrade qemu-devel with the + 32 bit "qemu" executable on amd64. If you upgrade qemu-devel with the KQEMU knob on, you have to # pkg_delete kqemu-kmod-1\* @@ -4224,7 +4224,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Henrik Brix Andersen <brix@FreeBSD.org> The IkiWiki search plug-in now uses www/xapian-omega as backend instead - of textproc/hyperestraier. You will need to update the configuration of + of textproc/hyperestraier. You will need to update the configuration of any search enabled IkiWiki installations and rebuild them since the search form has changed. @@ -4294,8 +4294,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: FreeBSD GNOME Team <gnome@FreeBSD.org> The poppler* ports have been updated to 0.8.3 and the shared libraries - have changed. Firefox 3.0 has been added to the tree as www/firefox3. - These changes require that all dependent ports be updated. You can do + have changed. Firefox 3.0 has been added to the tree as www/firefox3. + These changes require that all dependent ports be updated. You can do this in one of two ways: # portmaster pixman @@ -4335,7 +4335,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Beech Rintoul <beech@FreeBSD.org> Upgrading between different beta releases can cause problems when - changes to the ban database schema have occurred. The 'bantool' + changes to the ban database schema have occurred. The 'bantool' utility now comes with a -u switch that will check and update the ban database as necessary. @@ -4358,12 +4358,12 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/opera and www/opera/devel AUTHOR: Ion-Mihai Tetcu <itetcu@FreeBSD.org> - The Opera port has been updated from 9.2x to 9.5x. A lot of things have + The Opera port has been updated from 9.2x to 9.5x. A lot of things have been changed such as keyboard shortcuts[1]; new storage and indexing formats for mail and feeds; new search.ini; native amd64 binaries; no 4.x - support. You will be asked whether to convert mail and feeds to new - format during start up. Warning: there is no way to downgrade back to - the old format. Be sure to see the Changelog[2]. + support. You will be asked whether to convert mail and feeds to new + format during start up. Warning: there is no way to downgrade back to + the old format. Be sure to see the Changelog[2]. [1] http://www.opera.com/support/search/view/884/ [2] http://www.opera.com/docs/changelogs/freebsd/950/ @@ -4382,7 +4382,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Wesley Shields <wxs@FreeBSD.org> editors/nvi-devel has been changed to install nvi, nex, and nview as - to not conflict with editors/2bsd-vi. Please note the new names if + to not conflict with editors/2bsd-vi. Please note the new names if you use this port. 20080616: @@ -4398,19 +4398,19 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of www/linux-opera AUTHOR: mezz@FreeBSD.org - The Opera port has been updated from 9.2x to 9.5x. A lot of things have + The Opera port has been updated from 9.2x to 9.5x. A lot of things have been changed such as keyboard shortcuts[1]; new storage and indexing formats for mail and feeds; new search.ini; probably more that I have - missed. I do not know if the keyboard shortcuts and search.ini will be - overwritten. You will be asked whether you want mail and feeds to be - converted to new format during start up. Warning: there is no way to - downgrade back to the old format. Be sure to see the Changelog[2]. + missed. I do not know if the keyboard shortcuts and search.ini will be + overwritten. You will be asked whether you want mail and feeds to be + converted to new format during start up. Warning: there is no way to + downgrade back to the old format. Be sure to see the Changelog[2]. [1] http://www.opera.com/support/search/view/884/ [2] http://www.opera.com/docs/changelogs/linux/950/ It is probably best for you to back up your linux-opera directory in - case until you have no problem with new Opera for a while. Also, you + case until you have no problem with new Opera for a while. Also, you might have to re-configure search and keyboard shortcuts if these were overwritten: @@ -4419,16 +4419,16 @@ you update your ports collection, before attempting any port upgrades. If you are seeing an error of undefined symbols related to GTK+, it is because it needs newer linux-gtk2 that ports doesn't have. You can enter 'opera:config#FileSelector|DialogToolkit' in the address bar and change - from 0 to 1 in 'Dialog Toolkit' if it annoys you. 0 = auto detection, + from 0 to 1 in 'Dialog Toolkit' if it annoys you. 0 = auto detection, 1 = QT, and 2 = GTK+. 20080610: AFFECTS: users of mail/svnmailer AUTHOR: pgollucci@FreeBSD.org - Some of the config directives and sections allowed have changed. You will + Some of the config directives and sections allowed have changed. You will have to edit your config file when updating to 1.1.0-dev-r1373 version of - the port. Please see the following URL for more information: + the port. Please see the following URL for more information: http://opensource.perlig.de/en/svnmailer/doc-1.1/#general-config-charset @@ -4467,8 +4467,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: Yasuhiro KIMURA <yasu@utahime.org> The port (editors/emacs) is updated to 22.2 and some of Emacs Lisp - directories had changed. So you should reinstall all ports that depend - on it. Please do something like: + directories had changed. So you should reinstall all ports that depend + on it. Please do something like: # portupgrade -fr emacs @@ -4477,7 +4477,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: brix@FreeBSD.org If password based logins is enabled in IkiWiki, those passwords were - stored in cleartext in the userdb. To guard against exposing users' + stored in cleartext in the userdb. To guard against exposing users' passwords, IkiWiki 2.48 and later use strong (blowfish) hashes for storing passwords. @@ -4502,7 +4502,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: osa@FreeBSD.org Nginx version lines have been changed: 0.5 -> 0.6 for stable and - 0.6 -> 0.7 for development version. Make sure your configuration + 0.6 -> 0.7 for development version. Make sure your configuration files are compatible with the new version(s). 20080519: @@ -4510,7 +4510,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: brix@FreeBSD.org The default installation is now configured for running bitlbee as - user 'bitlbee'. Make sure any existing configuration files are + user 'bitlbee'. Make sure any existing configuration files are readable by that user. 20080517: @@ -4530,7 +4530,7 @@ you update your ports collection, before attempting any port upgrades. Amavisd-new 2.6.0 introduces several incompatibilities with prior versions. If you are upgrading from 2.5.4 or earlier, you will need to update your - SQL schema. If you have third party programs that access SQL tables, you + SQL schema. If you have third party programs that access SQL tables, you will need to update those also. COMPATIBILITY WITH 2.5.4: @@ -4554,8 +4554,8 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of audio/ampache AUTHOR: jadawin@FreeBSD.org - Ampache 3.4 uses a different config parser. Unfortunately the new parser - is unable to read old config files. In order to migrate your current + Ampache 3.4 uses a different config parser. Unfortunately the new parser + is unable to read old config files. In order to migrate your current configuration, you should run `php ${WWWDIR}/bin/migrate_config.inc' from the command line. @@ -4563,16 +4563,16 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of databases/ptop AUTHOR: beech@FreeBSD.org - The authors have changed the name of this utility to `pg_top'. To avoid + The authors have changed the name of this utility to `pg_top'. To avoid conflict with another port in the Tree with the same name we have retained - `ptop' as the portname. Note that binary has also changed to `pg_top'. + `ptop' as the portname. Note that binary has also changed to `pg_top'. Please start the utility with that name after updating. 20080507: AFFECTS: Perl interface users of audio/gramofile AUTHOR: rafan@FreeBSD.org - Perl support is removed due to devel/swig11 removal in ports. If you use + Perl support is removed due to devel/swig11 removal in ports. If you use the Perl interface, you are encouraged to use the new Audio::Gramofile found on CPAN (contact me for the ports). @@ -4605,7 +4605,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: beech@FreeBSD.org The install location of phpgedview has changed from www/data/phpGedView to - www/phpgedview. If you are updating from a previous version please do + www/phpgedview. If you are updating from a previous version please do the following: mv /usr/local/www/data/phpGedView /usr/local/www @@ -4618,7 +4618,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: garga@FreeBSD.org Clamav 0.93 does not support the daily.inc and main.inc directories format - for virus databases. You need to remove these directories manually and + for virus databases. You need to remove these directories manually and force freshclam to get new cvd format files before starting clamd: portupgrade clamav @@ -4660,7 +4660,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: mnag@FreeBSD.org Port databases/sqlite3 was updated to 3.5.6 and now has threads enabled - by default. If you encounter any problem with it, you can rebuild SQLite3 + by default. If you encounter any problem with it, you can rebuild SQLite3 without threads and test or change Makefile of affected port with this: sed -i.bak -E -e "s|USE_SQLITE=.*|USE_SQLITE=34|g" \ @@ -4673,7 +4673,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: nox@FreeBSD.org The default configuration location (qemu-ifup script etc.) has been - changed from /etc to ${PREFIX}/etc (usually /usr/local/etc). Move your + changed from /etc to ${PREFIX}/etc (usually /usr/local/etc). Move your files accordingly. 20080330: @@ -4702,14 +4702,14 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of emulators/linux_base-f8 AUTHOR: bsam@FreeBSD.org - The new port is used just like emulators/linux_base-fc6. Please, read + The new port is used just like emulators/linux_base-fc6. Please, read carefully entry 20070327 about emulators/linux_base-fc6. 20080323: AFFECTS: users of multimedia/gstreamer AUTHOR: multimedia@FreeBSD.org - Gstreamer port was updated. Due to the move of some plugins between + Gstreamer port was updated. Due to the move of some plugins between ports, you will have to rebuild the gstreamer-plugins-good port after upgrading. @@ -4725,7 +4725,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: all GNOME users and ports depend on misc/gnomehier AUTHOR: gnome@FreeBSD.org - GNOME has been updated to 2.22.0. You have to deinstall a few ports first + GNOME has been updated to 2.22.0. You have to deinstall a few ports first before using portupgrade or portmaster in order to successfully upgrade your GNOME installation. @@ -4749,7 +4749,7 @@ you update your ports collection, before attempting any port upgrades. In order to update to glib 2.16 or higher, you must first update the glib20 port on its own or you will get a failure trying to install - devel/gio-fam-backend saying it cannot find -lgio-2.0. Portmaster users + devel/gio-fam-backend saying it cannot find -lgio-2.0. Portmaster users can do: portmaster glib-2 @@ -4846,7 +4846,7 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: novel@FreeBSD.org gnutls has been updated to 2.2.2 and all shared libraries' versions have - been bumped. So you need to rebuild all applications that depend on + been bumped. So you need to rebuild all applications that depend on gnutls. Do something like: portupgrade -rf gnutls @@ -4870,9 +4870,9 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: jacula@gmail.com From now XMonad uses a new configuration file system, so you don't have - to edit Config.hs anymore. Instead, create a custom configuration file - ~/.xmonad/xmonad.hs. You can take a look at some samples on Xmonad's - website. Note that you can be interested in x11-wm/xmonad-contrib. + to edit Config.hs anymore. Instead, create a custom configuration file + ~/.xmonad/xmonad.hs. You can take a look at some samples on Xmonad's + website. Note that you can be interested in x11-wm/xmonad-contrib. 20080218: AFFECTS: users of devel/poco and devel/poco-ssl @@ -4880,7 +4880,7 @@ you update your ports collection, before attempting any port upgrades. The HashFunction class template has been changed in an incompatible way. The member function formerly named hash() is now the function call - operator. If you have defined your own HashFunction classes, then you + operator. If you have defined your own HashFunction classes, then you have to update your code. 20080216: @@ -4901,7 +4901,7 @@ you update your ports collection, before attempting any port upgrades. As was claimed in the entry 20070301 below in this file, you should fill ALT_DEPENDS section of pkgtools.conf for portupgrade to work correctly - with your alternative dependencies. Now it is an obligatory requirement. + with your alternative dependencies. Now it is an obligatory requirement. It was done as a compromise between speed and complexity. @@ -4910,8 +4910,8 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: johans@FreeBSD.org www/xshttpd now uses ${PREFIX}/www/xshttpd/ as a root directory for its - data files. The xshttpd configuration files have been moved to - ${PREFIX}/www/xshttpd/conf/. Please move the appropriate local files + data files. The xshttpd configuration files have been moved to + ${PREFIX}/www/xshttpd/conf/. Please move the appropriate local files manually if you are upgrading from 3.4 or older versions. 20080202: @@ -4947,7 +4947,7 @@ you update your ports collection, before attempting any port upgrades. AFFECTS: users of net-p2p/deluge AUTHOR: mezz@FreeBSD.org - Deluge was updated to version 0.5.8.2. If you are using blocklist plugin, + Deluge was updated to version 0.5.8.2. If you are using blocklist plugin, you have to remove blocklist.conf first before you can run it, or it will crash upon start up. @@ -5038,13 +5038,13 @@ you update your ports collection, before attempting any port upgrades. AUTHOR: brix@FreeBSD.org irc/bitlbee now stores saved user settings in /var/db/bitlbee/, not - $PREFIX/etc/bitlbee/. You will have to manually move any existing user + $PREFIX/etc/bitlbee/. You will have to manually move any existing user settings to the new location (or override the user settings directory - using -d if you wish to keep the old behavior). Other configuration + using -d if you wish to keep the old behavior). Other configuration files are still kept in $PREFIX/etc/bitlbee/ by default. The default installation is now configured for running bitlbee as user - 'nobody' by default. Make sure any existing configuration files are + 'nobody' by default. Make sure any existing configuration files are readable by that user. $FreeBSD$ |