diff options
| -rw-r--r-- | misc/amanda-client/Makefile | 2 | ||||
| -rw-r--r-- | misc/amanda-server/Makefile | 31 | ||||
| -rw-r--r-- | misc/amanda24-client/Makefile | 2 | ||||
| -rw-r--r-- | misc/amanda24-server/Makefile | 31 | ||||
| -rw-r--r-- | misc/amanda25-client/Makefile | 2 | ||||
| -rw-r--r-- | misc/amanda25-server/Makefile | 31 | ||||
| -rw-r--r-- | misc/amanda26-client/Makefile | 2 | ||||
| -rw-r--r-- | misc/amanda26-server/Makefile | 31 | ||||
| -rw-r--r-- | misc/amanda32-client/Makefile | 2 | ||||
| -rw-r--r-- | misc/amanda32-server/Makefile | 31 |
10 files changed, 110 insertions, 55 deletions
diff --git a/misc/amanda-client/Makefile b/misc/amanda-client/Makefile index ccc658396421..b628acef5816 100644 --- a/misc/amanda-client/Makefile +++ b/misc/amanda-client/Makefile @@ -6,7 +6,7 @@ # PORTNAME= ${MASTERPORTNAME:S/-server/-client/g} -PORTREVISION= 0 +PORTREVISION= 1 MASTERDIR= ${.CURDIR}/../amanda24-server COMMENT= ${PKGDIR}/pkg-comment.client diff --git a/misc/amanda-server/Makefile b/misc/amanda-server/Makefile index 0b27fb544673..f36ae4febe2c 100644 --- a/misc/amanda-server/Makefile +++ b/misc/amanda-server/Makefile @@ -7,7 +7,7 @@ PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.2p2 -PORTREVISION?= 0 +PORTREVISION?= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda @@ -36,6 +36,8 @@ pre-fetch: @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @@ -44,16 +46,14 @@ pre-fetch: @${ECHO} " The default is user" @${ECHO} "" -RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar -BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client +BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-client --with-gnutar=${PREFIX}/bin/gtar + --without-client MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdump.8 \ amflush.8 amgetconf.8 amlabel.8 amoverview.8 amreport.8 \ @@ -74,6 +74,12 @@ RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} @@ -102,20 +108,19 @@ pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} "" -BUILD_DEPENDS= gtar:${PORTSDIR}/archivers/gtar -RUN_DEPENDS= gtar:${PORTSDIR}/archivers/gtar - CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-server --with-gnutar=${PREFIX}/bin/gtar + --without-server MAN8= amanda.8 amrecover.8 amrestore.8 @@ -127,6 +132,12 @@ post-install: ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} diff --git a/misc/amanda24-client/Makefile b/misc/amanda24-client/Makefile index ccc658396421..b628acef5816 100644 --- a/misc/amanda24-client/Makefile +++ b/misc/amanda24-client/Makefile @@ -6,7 +6,7 @@ # PORTNAME= ${MASTERPORTNAME:S/-server/-client/g} -PORTREVISION= 0 +PORTREVISION= 1 MASTERDIR= ${.CURDIR}/../amanda24-server COMMENT= ${PKGDIR}/pkg-comment.client diff --git a/misc/amanda24-server/Makefile b/misc/amanda24-server/Makefile index 0b27fb544673..f36ae4febe2c 100644 --- a/misc/amanda24-server/Makefile +++ b/misc/amanda24-server/Makefile @@ -7,7 +7,7 @@ PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.2p2 -PORTREVISION?= 0 +PORTREVISION?= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda @@ -36,6 +36,8 @@ pre-fetch: @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @@ -44,16 +46,14 @@ pre-fetch: @${ECHO} " The default is user" @${ECHO} "" -RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar -BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client +BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-client --with-gnutar=${PREFIX}/bin/gtar + --without-client MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdump.8 \ amflush.8 amgetconf.8 amlabel.8 amoverview.8 amreport.8 \ @@ -74,6 +74,12 @@ RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} @@ -102,20 +108,19 @@ pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} "" -BUILD_DEPENDS= gtar:${PORTSDIR}/archivers/gtar -RUN_DEPENDS= gtar:${PORTSDIR}/archivers/gtar - CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-server --with-gnutar=${PREFIX}/bin/gtar + --without-server MAN8= amanda.8 amrecover.8 amrestore.8 @@ -127,6 +132,12 @@ post-install: ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} diff --git a/misc/amanda25-client/Makefile b/misc/amanda25-client/Makefile index ccc658396421..b628acef5816 100644 --- a/misc/amanda25-client/Makefile +++ b/misc/amanda25-client/Makefile @@ -6,7 +6,7 @@ # PORTNAME= ${MASTERPORTNAME:S/-server/-client/g} -PORTREVISION= 0 +PORTREVISION= 1 MASTERDIR= ${.CURDIR}/../amanda24-server COMMENT= ${PKGDIR}/pkg-comment.client diff --git a/misc/amanda25-server/Makefile b/misc/amanda25-server/Makefile index 0b27fb544673..f36ae4febe2c 100644 --- a/misc/amanda25-server/Makefile +++ b/misc/amanda25-server/Makefile @@ -7,7 +7,7 @@ PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.2p2 -PORTREVISION?= 0 +PORTREVISION?= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda @@ -36,6 +36,8 @@ pre-fetch: @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @@ -44,16 +46,14 @@ pre-fetch: @${ECHO} " The default is user" @${ECHO} "" -RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar -BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client +BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-client --with-gnutar=${PREFIX}/bin/gtar + --without-client MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdump.8 \ amflush.8 amgetconf.8 amlabel.8 amoverview.8 amreport.8 \ @@ -74,6 +74,12 @@ RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} @@ -102,20 +108,19 @@ pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} "" -BUILD_DEPENDS= gtar:${PORTSDIR}/archivers/gtar -RUN_DEPENDS= gtar:${PORTSDIR}/archivers/gtar - CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-server --with-gnutar=${PREFIX}/bin/gtar + --without-server MAN8= amanda.8 amrecover.8 amrestore.8 @@ -127,6 +132,12 @@ post-install: ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} diff --git a/misc/amanda26-client/Makefile b/misc/amanda26-client/Makefile index ccc658396421..b628acef5816 100644 --- a/misc/amanda26-client/Makefile +++ b/misc/amanda26-client/Makefile @@ -6,7 +6,7 @@ # PORTNAME= ${MASTERPORTNAME:S/-server/-client/g} -PORTREVISION= 0 +PORTREVISION= 1 MASTERDIR= ${.CURDIR}/../amanda24-server COMMENT= ${PKGDIR}/pkg-comment.client diff --git a/misc/amanda26-server/Makefile b/misc/amanda26-server/Makefile index 0b27fb544673..f36ae4febe2c 100644 --- a/misc/amanda26-server/Makefile +++ b/misc/amanda26-server/Makefile @@ -7,7 +7,7 @@ PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.2p2 -PORTREVISION?= 0 +PORTREVISION?= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda @@ -36,6 +36,8 @@ pre-fetch: @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @@ -44,16 +46,14 @@ pre-fetch: @${ECHO} " The default is user" @${ECHO} "" -RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar -BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client +BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-client --with-gnutar=${PREFIX}/bin/gtar + --without-client MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdump.8 \ amflush.8 amgetconf.8 amlabel.8 amoverview.8 amreport.8 \ @@ -74,6 +74,12 @@ RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} @@ -102,20 +108,19 @@ pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} "" -BUILD_DEPENDS= gtar:${PORTSDIR}/archivers/gtar -RUN_DEPENDS= gtar:${PORTSDIR}/archivers/gtar - CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-server --with-gnutar=${PREFIX}/bin/gtar + --without-server MAN8= amanda.8 amrecover.8 amrestore.8 @@ -127,6 +132,12 @@ post-install: ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} diff --git a/misc/amanda32-client/Makefile b/misc/amanda32-client/Makefile index ccc658396421..b628acef5816 100644 --- a/misc/amanda32-client/Makefile +++ b/misc/amanda32-client/Makefile @@ -6,7 +6,7 @@ # PORTNAME= ${MASTERPORTNAME:S/-server/-client/g} -PORTREVISION= 0 +PORTREVISION= 1 MASTERDIR= ${.CURDIR}/../amanda24-server COMMENT= ${PKGDIR}/pkg-comment.client diff --git a/misc/amanda32-server/Makefile b/misc/amanda32-server/Makefile index 0b27fb544673..f36ae4febe2c 100644 --- a/misc/amanda32-server/Makefile +++ b/misc/amanda32-server/Makefile @@ -7,7 +7,7 @@ PORTNAME?= ${MASTERPORTNAME} PORTVERSION= 2.4.2p2 -PORTREVISION?= 0 +PORTREVISION?= 1 CATEGORIES= misc MASTER_SITES= ${MASTER_SITE_SOURCEFORGE} MASTER_SITE_SUBDIR= amanda @@ -36,6 +36,8 @@ pre-fetch: @${ECHO} "" @${ECHO} " -DWITH_PLOT to enable ploting, requires X11 libraries" @${ECHO} " -DWITH_SAMBA to enable the use of smbclient" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_TAPE=tape to specify the default tape device" @@ -44,16 +46,14 @@ pre-fetch: @${ECHO} " The default is user" @${ECHO} "" -RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar -BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client \ - gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client +BUILD_DEPENDS= ${LOCALBASE}/sbin/amrecover:${PORTSDIR}/misc/amanda24-client CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-client --with-gnutar=${PREFIX}/bin/gtar + --without-client MAN8= amadmin.8 amcheck.8 amcheckdb.8 amcleanup.8 amdump.8 \ amflush.8 amgetconf.8 amlabel.8 amoverview.8 amreport.8 \ @@ -74,6 +74,12 @@ RUN_DEPENDS+= smbclient:${PORTSDIR}/net/samba CONFIGURE_ARGS+= --with-smbclient=${PREFIX}/bin/smbclient .endif +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} @@ -102,20 +108,19 @@ pre-fetch: @${ECHO} "" @${ECHO} "You may use the following build options:" @${ECHO} "" + @${ECHO} " -DWITHOUT_GNUTAR to NOT use GNUTar and use the" + @${ECHO} " native FreeBSD version" @${ECHO} " AMANDA_SERVER=server to specify a server name" @${ECHO} " The default is `uname -n`" @${ECHO} " AMANDA_CONFIG=config to specify the default configuation" @${ECHO} " The default is user" @${ECHO} "" -BUILD_DEPENDS= gtar:${PORTSDIR}/archivers/gtar -RUN_DEPENDS= gtar:${PORTSDIR}/archivers/gtar - CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ --with-amandahosts --with-fqdn \ --with-dump-honor-nodump --with-buffered-dump \ --with-user=operator --with-group=operator \ - --without-server --with-gnutar=${PREFIX}/bin/gtar + --without-server MAN8= amanda.8 amrecover.8 amrestore.8 @@ -127,6 +132,12 @@ post-install: ${WRKSRC}/example/disklist \ ${PREFIX}/share/examples/amanda +.if !defined (WITHOUT_GNUTAR) +CONFIGURE_ARGS+= --with-gnutar=${PREFIX}/bin/gtar +BUILD_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +RUN_DEPENDS+= gtar:${PORTSDIR}/archivers/gtar +.endif + .if defined (AMANDA_SERVER) CONFIGURE_ARGS+= --with-index-server=${AMANDA_SERVER} CONFIGURE_ARGS+= --with-tape-server=${AMANDA_SERVER} |