diff options
Diffstat (limited to 'Mk/bsd.port.mk')
| -rw-r--r-- | Mk/bsd.port.mk | 246 |
1 files changed, 203 insertions, 43 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index f1a5395eeddd..add7d74f08a9 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -9,6 +9,10 @@ # # Please view me with 4 column tabs! +# This is the master file for the most common elements to all port +# Makefile in the ports system. For a more general overview of its +# use and importance, see the Porter's Handbook. + # There are two different types of "maintainers" in the ports framework. # The maintainer alias of the bsd.port.mk file is listed below in the # FreeBSD_MAINTAINER entry. You should consult them if you have any @@ -30,7 +34,8 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # (default: ports@FreeBSD.org). # # These are meta-variables that are automatically set to the system -# you are running on. +# you are running on. These are provided in case you need to take +# different actions for different values. # # ARCH - The architecture, as returned by "uname -p". # OPSYS - Portability clause. This is the operating system the @@ -40,12 +45,27 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # OSVERSION - The value of __FreeBSD_version. # PORTOBJFORMAT - The object format ("aout" or "elf"). # +# This is the beginning of the list of all variables that need to be +# defined in a port, listed in order that they should be included +# to fit in with existing conventions. (Exception: MAINTAINER actually +# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP). +# # These variables are used to identify your port. # -# PORTNAME - Name of software. -# PORTVERSION - Version of software. +# PORTNAME - Name of software. Mandatory. +# PORTVERSION - Version of software. Mandatory. +# PORTREVISION - Version of port. Optional. Commonly used to indicate +# that an update has happened that affects the port +# framework itself, but not the distributed software +# (e.g., local patches or Makefile changes). +# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic +# can be fooled by ports that appear to go backwards +# numerically (e.g. if port-0.3 is newer than port-1998). +# In this case, incrementing PORTEPOCH forces the revision. +# Default: 0 (no effect). # PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc. -# PKGNAMESUFFIX - Suffix to specify compilation options. +# Optional. +# PKGNAMESUFFIX - Suffix to specify compilation options. Optional. # PKGNAME - Always defined as # ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}. # Do not define this in your Makefile. @@ -53,6 +73,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # WRKSRC and DISTFILES below (default: # ${PORTNAME}-${PORTVERSION}). # CATEGORIES - A list of descriptive categories into which this port falls. +# Mandatory. # # These variable describe how to fetch files required for building the port. # @@ -63,7 +84,12 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # is set, .zip if USE_ZIP is set, .tar.gz otherwise). # You never have to set both DISTFILES and EXTRACT_SUFX. # MASTER_SITES - Primary location(s) for distribution files if not found -# locally. +# locally. See bsd.sites.mk for common choices for +# MASTER_SITES. +# MASTER_SITE_SUBDIR - Subdirectory of MASTER_SITES (default: empty). +# Will sometimes need to be set to ${PORTNAME} for (e.g.) +# MASTER_SITE_SOURCEFORGE. Only guaranteed to work for +# choices of ${MASTER_SITES} defined in bsd.sites.mk. # PATCHFILES - Name(s) of additional files that contain distribution # patches (default: none). make will look for them at # PATCH_SITES (see below). They will automatically be @@ -71,18 +97,21 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # ".gz", ".bz2" or ".Z". # PATCH_SITES - Primary location(s) for distribution patch files # if not found locally. -# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} -# and ${PATCHFILES} will be put in this subdirectory of -# ${DISTDIR} (see below). Also they will be fetched in -# this subdirectory from FreeBSD mirror sites. +# DIST_SUBDIR - Suffix to ${DISTDIR} (default: none). If set, all +# ${DISTFILES} and ${PATCHFILES} will be put in this +# subdirectory of ${DISTDIR} (see below). Also they will +# be fetched in this subdirectory from FreeBSD mirror sites. # ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. # IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set -# this variable to their names. +# this variable to their names (default: empty). # EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to -# actually extract. +# actually extract (default: none). +# +# (NOTE: by convention, the MAINTAINER entry (see above) should go here.) # # These variables are typically set in /etc/make.conf to indicate -# the user's preferred location to fetch files from. +# the user's preferred location to fetch files from. You should +# rarely need to set these. # # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch # files if not found locally and ${MASTER_SITES}/${PATCH_SITES} @@ -127,27 +156,30 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # (default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED # or NO_CDROM is set, empty otherwise). # -# This variable is a boolean, so you don't need to set it to the reason. +# These variables are booleans, so you don't need to set them to the reason. # # IS_INTERACTIVE - Set this if your port needs to interact with the user # during any step in a package build. User can then decide # to skip this port by setting ${BATCH}, or compiling only # the interactive ports by setting ${INTERACTIVE}. +# (Default: not set.) # USE_SUBMAKE - Set this if you want that each of the port's main 6 targets # (extract, patch, configure, build, install and package) to be # executed in a separate make(1) process. Useful when one of # the stages needs to influence make(1) variables of the later # stages using ${WRKDIR}/Makefile.inc generated on the fly. +# (Default: not set.) # # Set these if your port only makes sense to certain architectures. # They are lists containing names for them (e.g., "alpha i386"). +# (Defaults: not set.) # # ONLY_FOR_ARCHS - Only build ports if ${ARCH} matches one of these. # NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. # # Use these if your port uses some of the common software packages. By # convention these should be set to 'yes', although they only need to be -# defined. +# defined. (Defaults: not set, unless explicitly indicated below.) # # USE_BZIP2 - Says that the port tarballs use bzip2, not gzip, for # compression. @@ -242,6 +274,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # USE_AUTOCONF is set, "configure" otherwise). # LIBTOOLFLAGS - Additional flags to pass to ltconfig # (default: --disable-ltlibs) +## # USE_PERL5 - Says that the port uses perl5 for building and running. # USE_PERL5_BUILD - Says that the port uses perl5 for building. # USE_PERL5_RUN - Says that the port uses perl5 for running. @@ -262,18 +295,83 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # (value: ${ARCH}-freebsd). # SITE_PERL - Directory name where site specific perl packages go. # This value is added to PLIST_SUB. +## # USE_BISON - Says that the port uses bison for building. +## # USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX. # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ). -# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man -# target. # USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB. -# USE_XLIB - Says that the port uses X libraries. +# USE_XLIB - Says that the port uses the X libraries. +# +# USE_DGS - Says that the port uses the dgs X11 libraries. +# USE_FREETYPE - Says that the port uses the freetype print libraries. +# USE_MESA - Says that the port uses the Mesa libraries. # USE_MOTIF - Says that the port uses the Motif toolkit. Implies USE_XPM. +# USE_XPM - Says that the port uses the xpm graphics libraries. +## +# USE_OPENSSL - Says that the port relies on the OpenSSL package. +# Default: not set. +## +# USE_JAVA - Says that the port relies on the Java language. +# Implies inclusion of bsd.java.mk. (Also see +# that file for more information on USE_JAVA_*). +# Default: not set. +# USE_PYTHON - Says that the port relies on the Python language. +# Implies inclusion of bsd.python.mk. (Also see +# that file for more information on USE_PYTHON_* +# and USE_PYDISTUTILS). +# Default: not set. +# USE_RUBY - Says that the port relies on the Ruby language. +# Implies inclusion of bsd.ruby.mk. (Also see +# that file for more information on USE_RUBY_*). +# Default: not set. +## +# USE_GNOME - A list of the Gnome dependencies the port has (e.g., +# glib12, gtk12). Implies that the port needs Gnome. +# Implies inclusion of bsd.gnome.mk or bsd.gnomeng.mk. +# (Also see those files for more information about +# USE_GNOMELIBS, USE_GLIB, and USE_GTK). +# Default: not set. +# USE_GNOMENG - Set to yes to use bsd.gnomeng.mk, otherwise, the +# older bsd.gnome.mk is used. The former is preferred +# for new work. Meaningless without USE_GNOME. +# Default: not set. +# +# USE_KDEBASE_VER - Set to either 2 or 3 to use the KDE windowing system. +# (Only 3 is currently supported). Implies inclusion +# of bsd.kde.mk. Default: not set. +# USE_KDELIBS_VER - Set to either 2 or 3 to use the KDE libraries. +# (Only 3 is currently supported). Implies inclusion +# of bsd.kde.mk. Default: not set. +# USE_QT_VER - Set to either 2 or 3 to use the QT libraries. +# (Only 3 is currently supported). Implies inclusion +# of bsd.kde.mk. Default: not set. +# +# USE_LINUX - Set to yes to say the port needs emulators/linux_base. +# Default: not set. +# USE_LINUX_PREFIX - controls the action of PREFIX (see above). # # Dependency checking. Use these if your port requires another port -# not in the list above. -# +# not in the list above. (Default: empty.) +# +# EXTRACT_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "extract" stage. "path" is +# the name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. +# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this +# package depends on in the "patch" stage. "path" is the +# name of a file if it starts with a slash (/), an +# executable otherwise. make will test for the existence +# (if it is a full pathname) or search for it in your +# $PATH (if it is an executable) and go into "dir" to do +# a "make all install" if it's not found. If the third +# field ("target") exists, it will be used instead of +# ${DEPENDS_TARGET}. # FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this # package depends in the "fetch" stage. "path" is the # name of a file if it starts with a slash (/), an @@ -349,10 +447,19 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # Variables that serve as convenient "aliases" for your *-install targets. # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". # -# INSTALL_PROGRAM - A command to install binary executables. -# INSTALL_SCRIPT - A command to install executable scripts. -# INSTALL_DATA - A command to install sharable data. -# INSTALL_MAN - A command to install manpages (doesn't compress). +# INSTALL_PROGRAM - A command to install binary executables. (By +# default, also strips them, unless ${STRIP} is +# overridden to be the empty string). +# INSTALL_SCRIPT - A command to install executable scripts. +# INSTALL_DATA - A command to install sharable data. +# INSTALL_MAN - A command to install manpages. May or not compress, +# depending on the value of MANCOMPRESSED (see below). +# +# Boolean to control whether manpages are installed. +# +# NO_INSTALL_MANPAGES - Says that the port doesn't want to install any +# manpages (default: not set, i.e. manpages +# are installed by default). # # Set the following to specify all manpages that your port installs. # These manpages will be automatically listed in ${PLIST}. Depending @@ -390,6 +497,11 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # for port and dependencies into ${DISTDIR} as necessary. # fetch-recursive-list - Show list of files that would be retrieved by # fetch-recursive. +# fetch-required-list - Show list of files that would be retrieved by +# fetch-required. +# fetch-required - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined), +# for port and dependencies that are not already installed +# into ${DISTDIR}. # extract - Unpacks ${DISTFILES} into ${WRKDIR}. # patch - Apply any provided patches to the source. # configure - Runs either GNU configure, one or more local configure @@ -413,7 +525,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # # Default sequence for "all" is: fetch checksum extract patch configure build # -# Please read the comments in the targets section below, you +# Please read the comments in the targets section below; you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. @@ -499,6 +611,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # # For build and install: # +# MAKEFILE - Name of the makefile (default: Makefile). # ALL_TARGET - Default target for sub-make in build stage (default: all). # BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}). # MAKE_ENV - Additional environment vars passed to sub-make in build @@ -580,6 +693,12 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # when you noticed the distfile you just fetched has # a different checksum and you intend to verify if # the port still works with it. +# USE_PACKAGE_DEPENDS - Install dependencies from existing packages instead +# of building the port from scratch. +# +# End of the list of all variables that need to be defined in a port. +# Most port authors should not need to understand anything after this point. +# # Start of pre-makefile section. .if !defined(AFTERPORTMK) @@ -938,15 +1057,18 @@ MANCOMPRESSED?= no .if defined(PATCHFILES) .if ${PATCHFILES:M*.bz2}x != x -HAVE_BZIP2_PATCHES= yes +PATCH_DEPENDS+= bzip2:${PORTSDIR}/archivers/bzip2 +.endif +.if ${PATCHFILES:M*.zip}x != x +PATCH_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip .endif .endif -.if (defined(USE_BZIP2) || defined(HAVE_BZIP2_PATCHES)) && !exists(/usr/bin/bzip2) -BUILD_DEPENDS+= bzip2:${PORTSDIR}/archivers/bzip2 +.if defined(USE_BZIP2) && !exists(/usr/bin/bzip2) +EXTRACT_DEPENDS+= bzip2:${PORTSDIR}/archivers/bzip2 .endif .if defined(USE_ZIP) -BUILD_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip +EXTRACT_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip .endif .if defined(USE_GMAKE) BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake @@ -1213,6 +1335,7 @@ PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ .if defined(PERL_CONFIGURE) USE_PERL5= yes +USE_REINPLACE=yes .endif .if exists(/usr/bin/perl5) && ${OSVERSION} >= 300000 && ${OSVERSION} < 500036 @@ -1452,6 +1575,7 @@ PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME} .endif PKG_CMD?= /usr/sbin/pkg_create +PKG_ADD?= /usr/sbin/pkg_add PKG_DELETE?= /usr/sbin/pkg_delete PKG_INFO?= /usr/sbin/pkg_info .if !defined(PKG_ARGS) @@ -1968,6 +2092,7 @@ PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX} CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \ INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib" CONFIGURE_SCRIPT?= Makefile.PL +MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION} .undef HAS_CONFIGURE .endif @@ -2596,6 +2721,8 @@ do-configure: @cd ${CONFIGURE_WRKSRC} && \ ${SETENV} ${CONFIGURE_ENV} \ ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} + @cd ${CONFIGURE_WRKSRC} && \ + ${REINPLACE_CMD} -e 's/perllocal.pod/&-${PORTNAME}/' Makefile .endif .if defined(USE_IMAKE) @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF}) @@ -2796,7 +2923,7 @@ security-check: stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam)$$'; \ fi; \ for i in `${GREP} -v '^@' ${TMPPLIST}`; do \ - if [ ! -L ${PREFIX}/$$i -a -f ${PREFIX}/$$i ]; then \ + if [ ! -L "${PREFIX}/$$i" -a -f "${PREFIX}/$$i" ]; then \ /usr/bin/objdump -R ${PREFIX}/$$i > \ ${WRKDIR}/.PLIST.objdump 2> /dev/null; \ if [ -s ${WRKDIR}/.PLIST.objdump ] ; then \ @@ -2877,16 +3004,16 @@ security-check: _FETCH_SEQ= pre-everything fetch-depends pre-fetch pre-fetch-script \ do-fetch post-fetch post-fetch-script _EXTRACT_DEP= fetch -_EXTRACT_SEQ= extract-message checksum build-depends lib-depends \ - misc-depends pre-extract pre-extract-script do-extract \ +_EXTRACT_SEQ= extract-message checksum extract-depends pre-extract \ + pre-extract-script do-extract \ post-extract post-extract-script _PATCH_DEP= extract -_PATCH_SEQ= patch-message pre-patch pre-patch-script do-patch \ - post-patch post-patch-script +_PATCH_SEQ= patch-message patch-depends pre-patch pre-patch-script \ + do-patch post-patch post-patch-script _CONFIGURE_DEP= patch -_CONFIGURE_SEQ= configure-message patch-libtool pre-configure \ - pre-configure-script do-configure post-configure \ - post-configure-script +_CONFIGURE_SEQ= configure-message patch-libtool build-depends lib-depends \ + misc-depends pre-configure pre-configure-script \ + do-configure post-configure post-configure-script _BUILD_DEP= configure _BUILD_SEQ= build-message pre-build pre-build-script do-build \ post-build post-build-script @@ -3219,7 +3346,7 @@ fetch-list: .if !target(makesum) makesum: @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes - @if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi + @if [ -f ${MD5_FILE} ]; then ${CAT} /dev/null > ${MD5_FILE}; fi @(cd ${DISTDIR}; \ for file in ${_CKSUMFILES}; do \ ${MD5} $$file >> ${MD5_FILE}; \ @@ -3313,7 +3440,7 @@ package-noinstall: ################################################################ .if !target(depends) -depends: lib-depends misc-depends fetch-depends build-depends run-depends +depends: extract-depends patch-depends lib-depends misc-depends fetch-depends build-depends run-depends .if defined(ALWAYS_BUILD_DEPENDS) _DEPEND_ALWAYS= 1 @@ -3321,7 +3448,7 @@ _DEPEND_ALWAYS= 1 _DEPEND_ALWAYS= 0 .endif -.for deptype in FETCH BUILD RUN +.for deptype in EXTRACT PATCH FETCH BUILD RUN ${deptype:L}-depends: .if defined(${deptype}_DEPENDS) .if !defined(NO_DEPENDS) @@ -3368,6 +3495,15 @@ ${deptype:L}-depends: ${ECHO_MSG} " >> No directory for $$prog. Skipping.."; \ else \ (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ + if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \ + subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \ + if [ -r "$${subpkgfile}" ]; then \ + ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \ + ${PKG_ADD} $${subpkgfile}; \ + fi; \ + else \ + (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ + fi ; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi; \ @@ -3458,7 +3594,7 @@ all-depends-list: ALL-DEPENDS-LIST= \ checked="${PARENT_CHECKED}"; \ - for dir in $$(${ECHO_CMD} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//') $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//'); do \ + for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//') $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//'); do \ if [ -d $$dir ]; then \ if (${ECHO_CMD} $$checked | ${GREP} -qwv "$$dir"); then \ child=$$(cd $$dir; ${MAKE} PARENT_CHECKED="$$checked" all-depends-list); \ @@ -3500,6 +3636,29 @@ fetch-recursive-list: done .endif +.if !target(fetch-required) +fetch-required: + @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies" + @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ + (cd $$dir; \ + tmp=`${MAKE} -V PKGNAME`; \ + if [ ! -d ${PKG_DBDIR}/$${tmp} ]; then \ + ${MAKE} fetch; \ + fi ); \ + done +.endif + +.if !target(fetch-required-list) +fetch-required-list: + @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ + (cd $$dir; \ + tmp=`${MAKE} -V PKGNAME`; \ + if [ ! -d ${PKG_DBDIR}/$${tmp} ]; then \ + ${MAKE} fetch-list; \ + fi ); \ + done +.endif + .if !target(checksum-recursive) checksum-recursive: @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies" @@ -3514,7 +3673,7 @@ build-depends-list: @${BUILD-DEPENDS-LIST} BUILD-DEPENDS-LIST= \ - for dir in $$(${ECHO_CMD} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u) $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u); do \ + for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u) $$(${ECHO_CMD} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u); do \ if [ -d $$dir ]; then \ ${ECHO_CMD} $$dir; \ else \ @@ -3610,7 +3769,7 @@ describe: generate-commentfile print q{|/dev/null}; \ } \ print q{|${MAINTAINER}|${CATEGORIES}|}; \ - @bdirs = map((split /:/)[1], split(q{ }, q{${FETCH_DEPENDS} ${BUILD_DEPENDS}})); \ + @bdirs = map((split /:/)[1], split(q{ }, q{${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS}})); \ @rdirs = map((split /:/)[1], split(q{ }, q{${RUN_DEPENDS}})); \ @mdirs = ( \ map((split /:/)[0], split(q{ }, q{${DEPENDS}})), \ @@ -3689,7 +3848,8 @@ ${.CURDIR}/README.html: generate-commentfile .if !target(pretty-print-build-depends-list) pretty-print-build-depends-list: -.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \ +.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ + defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \ defined(LIB_DEPENDS) || defined(DEPENDS) @${ECHO_CMD} -n 'This port requires package(s) "' @${ECHO_CMD} -n `${GREP} '^${PKGNAME}|' ${PORTSDIR}/${INDEXFILE} | awk -F\| '{print $$8;}'` |