diff options
Diffstat (limited to 'mail/exim-devel/files/configure.default')
| -rw-r--r-- | mail/exim-devel/files/configure.default | 370 |
1 files changed, 0 insertions, 370 deletions
diff --git a/mail/exim-devel/files/configure.default b/mail/exim-devel/files/configure.default deleted file mode 100644 index 2a3d30528ead..000000000000 --- a/mail/exim-devel/files/configure.default +++ /dev/null @@ -1,370 +0,0 @@ -###################################################################### -# Runtime configuration file for Exim # -###################################################################### - - -# This is a default configuration file which will operate correctly in -# uncomplicated installations. Please see the manual for a complete list -# of all the runtime configuration options that can be included in a -# configuration file. There are many more than are mentioned here. The -# manual is in the file doc/spec.txt in the Exim distribution as a plain -# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available -# from the Exim ftp sites. The manual is also online via the Exim web sites. - - -# This file is divided into several parts, all but the last of which are -# terminated by a line containing the word "end". The parts must appear -# in the correct order, and all must be present (even if some of them are -# in fact empty). Blank lines, and lines starting with # are ignored. - - - -###################################################################### -# MAIN CONFIGURATION SETTINGS # -###################################################################### - -# Specify your host's canonical name here. This should normally be the fully -# qualified "official" name of your host. If this option is not set, the -# uname() function is called to obtain the name. - -# primary_hostname = - - -# Specify the domain you want to be added to all unqualified addresses -# here. An unqualified address is one that does not contain an "@" character -# followed by a domain. For example, "caesar@rome.ex" is a fully qualified -# address, but the string "caesar" (i.e. just a login name) is an unqualified -# email address. Unqualified addresses are accepted only from local callers by -# default. See the receiver_unqualified_{hosts,nets} options if you want -# to permit unqualified addresses from remote sources. If this option is -# not set, the primary_hostname value is used for qualification. - -# qualify_domain = - - -# If you want unqualified recipient addresses to be qualified with a different -# domain to unqualified sender addresses, specify the recipient domain here. -# If this option is not set, the qualify_domain value is used. - -# qualify_recipient = - - -# Specify your local domains as a colon-separated list here. If this option -# is not set (i.e. not mentioned in the configuration file), the -# qualify_recipient value is used as the only local domain. If you do not want -# to do any local deliveries, uncomment the following line, but do not supply -# any data for it. This sets local_domains to an empty string, which is not -# the same as not mentioning it at all. An empty string specifies that there -# are no local domains; not setting it at all causes the default value (the -# setting of qualify_recipient) to be used. - -# local_domains = - - -# If you want to accept mail addressed to your host's literal IP address, for -# example, mail addressed to "user@[111.111.111.111]", then uncomment the -# following line, or supply the literal domain(s) as part of "local_domains" -# above. - -# local_domains_include_host_literals - - -# No local deliveries will ever be run under the uids of these users (a colon- -# separated list). An attempt to do so gets changed so that it runs under the -# uid of "nobody" instead. This is a paranoic safety catch. Note the default -# setting means you cannot deliver mail addressed to root as if it were a -# normal user. This isn't usually a problem, as most sites have an alias for -# root that redirects such mail to a human administrator. - -exim_user = XX_BINOWN_XX -exim_group = mail -never_users = root : XX_BINOWN_XX - - -# The use of your host as a mail relay by any host, including the local host -# calling its own SMTP port, is locked out by default. If you want to permit -# relaying from the local host, you should set -# -# host_accept_relay = localhost -# -# If you want to permit relaying through your host from certain hosts or IP -# networks, you need to set the option appropriately, for example -# -# host_accept_relay = my.friends.host : 131.111.0.0/16 -# -# If you are an MX backup or gateway of some kind for some domains, you must -# set relay_domains to match those domains. This will allow any host to -# relay through your host to those domains. -# -# See the section of the manual entitled "Control of relaying" for more -# information. - -host_accept_relay = "127.0.0.1/32" - - -# The setting below causes Exim to do a reverse DNS lookup on all incoming -# IP calls, in order to get the true host name. If you feel this is too -# expensive, you can specify the networks for which a lookup is done, or -# remove the setting entirely. - -host_lookup = 0.0.0.0/0 - - -# By default, Exim expects all envelope addresses to be fully qualified, that -# is, they must contain both a local part and a domain. If you want to accept -# unqualified addresses (just a local part) from certain hosts, you can specify -# these hosts by setting one or both of -# -# receiver_unqualified_hosts = -# sender_unqualified_hosts = -# -# to control sender and receiver addresses, respectively. When this is done, -# unqualified addresses are qualified using the settings of qualify_domain -# and/or qualify_recipient (see above). - - -# By default, Exim does not make any checks, other than syntactic ones, on -# incoming addresses during the SMTP dialogue. This reduces delays in SMTP -# transactions, but it does mean that you might accept messages with unknown -# recipients, and/or bad senders. - -# Uncomment this line if you want incoming recipient addresses to be verified -# during the SMTP dialogue. Unknown recipients are then rejected at this stage, -# and the generation of a failure message is the job of the sending host. - -# receiver_verify - -# Uncomment this line if you want incoming sender addresses (return-paths) to -# be verified during the SMTP dialogue. Verification can normally only check -# that the domain exists. - -# sender_verify - - -# Exim contains support for the Realtime Blocking List (RBL) that is being -# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background. -# Uncommenting the first line below will make Exim reject mail from any -# host whose IP address is blacklisted in the RBL at maps.vix.com. Some -# others have followed the RBL lead and have produced other lists: DUL is -# a list of dial-up addresses, and ORBS is a list of open relay systems. The -# second line below checks all three lists. - -# rbl_domains = rbl.maps.vix.com -# rbl_domains = rbl.maps.vix.com:dul.maps.vix.com:relays.orbs.org - - -# If you want Exim to support the "percent hack" for all your local domains, -# uncomment the following line. This is the feature by which mail addressed -# to x%y@z (where z is one of your local domains) is locally rerouted to -# x@y and sent on. Otherwise x%y is treated as an ordinary local part. - -# percent_hack_domains = * - -pid_file_path = /var/run/exim%s.pid - - -end - - - -###################################################################### -# TRANSPORTS CONFIGURATION # -###################################################################### -# ORDER DOES NOT MATTER # -# Only one appropriate transport is called for each delivery. # -###################################################################### - -# A transport is used only when referenced from a director or a router that -# successfully handles an address. - - -# This transport is used for delivering messages over SMTP connections. - -remote_smtp: - driver = smtp - - -# This transport is used for local delivery to user mailboxes. By default -# it will be run under the uid and gid of the local user, and requires -# the sticky bit to be set on the /var/mail directory. Some systems use -# the alternative approach of running mail deliveries under a particular -# group instead of using the sticky bit. The commented options below show -# how this can be done. - -local_delivery: - driver = appendfile - file = /var/mail/${local_part} - delivery_date_add - envelope_to_add - return_path_add - group = mail - mode = 0660 - - -# This transport is used for handling pipe deliveries generated by alias -# or .forward files. If the pipe generates any standard output, it is returned -# to the sender of the message as a delivery error. Set return_fail_output -# instead of return_output if you want this to happen only when the pipe fails -# to complete normally. You can set different transports for aliases and -# forwards if you want to - see the references to address_pipe below. - -address_pipe: - driver = pipe - return_output - - -# This transport is used for handling deliveries directly to files that are -# generated by aliassing or forwarding. - -address_file: - driver = appendfile - delivery_date_add - envelope_to_add - return_path_add - - -# This transport is used for handling autoreplies generated by the filtering -# option of the forwardfile director. - -address_reply: - driver = autoreply - - -end - - - -###################################################################### -# DIRECTORS CONFIGURATION # -# Specifies how local addresses are handled # -###################################################################### -# ORDER DOES MATTER # -# A local address is passed to each in turn until it is accepted. # -###################################################################### - -# Local addresses are those with a domain that matches some item in the -# "local_domains" setting above, or those which are passed back from the -# routers because of a "self=local" setting (not used in this configuration). - - -# This director handles aliasing using a traditional /etc/aliases file. -# If any of your aliases expand to pipes or files, you will need to set -# up a user and a group for these deliveries to run under. You can do -# this by uncommenting the "user" option below (changing the user name -# as appropriate) and adding a "group" option if necessary. Alternatively, you -# can specify "user" on the transports that are used. Note that those -# listed below are the same as are used for .forward files; you might want -# to set up different ones for pipe and file deliveries from aliases. - -system_aliases: - driver = aliasfile - file = /etc/aliases - search_type = lsearch - file_transport = address_file - pipe_transport = address_pipe - user = XX_BINOWN_XX - - -# This director handles forwarding using traditional .forward files. -# If you want it also to allow mail filtering when a forward file -# starts with the string "# Exim filter", uncomment the "filter" option. - -# The no_verify setting means that this director will be skipped when -# verifying addresses if sender_verify or receiver_verify is set (though -# they are not set by default). Similarly, no_expn means that this director -# will be skipped if smtp_expn_hosts is set to allow any hosts to use the -# EXPN command. - -# The check_ancestor option means that if the forward file generates an -# address that is an ancestor of the current one, the current one gets -# passed on instead. This covers the case where A is aliased to B and B -# has a .forward file pointing to A. - -# The three transports specified at the end are those that are used when -# forwarding generates a direct delivery to a file, or to a pipe, or sets -# up an auto-reply, respectively. - -userforward: - driver = forwardfile - file = .forward - no_verify - no_expn - check_ancestor -# filter - file_transport = address_file - pipe_transport = address_pipe - reply_transport = address_reply - - -# This director matches local user mailboxes. - -localuser: - driver = localuser - transport = local_delivery - - -end - - - -###################################################################### -# ROUTERS CONFIGURATION # -# Specifies how remote addresses are handled # -###################################################################### -# ORDER DOES MATTER # -# A remote address is passed to each in turn until it is accepted. # -###################################################################### - -# Remote addresses are those with a domain that does not match any item -# in the "local_domains" setting above. - - -# This router routes to remote hosts over SMTP using a DNS lookup with -# default options. - -lookuphost: - driver = lookuphost - transport = remote_smtp - - -# This router routes to remote hosts over SMTP by explicit IP address, -# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs -# require this facility, which is why it is enabled by default in Exim. -# If you want to lock it out, set forbid_domain_literals in the main -# configuration section above. - -literal: - driver = ipliteral - transport = remote_smtp - - -end - - - -###################################################################### -# RETRY CONFIGURATION # -###################################################################### - -# This single retry rule applies to all domains and all errors. It specifies -# retries every 15 minutes for 2 hours, then increasing retry intervals, -# starting at 1 hour and increasing each time by a factor of 1.5, up to 16 -# hours, then retries every 8 hours until 4 days have passed since the first -# failed delivery. - -# Domain Error Retries -# ------ ----- ------- - -* * F,2h,15m; G,16h,1h,1.5; F,4d,8h - -end - - - -###################################################################### -# REWRITE CONFIGURATION # -###################################################################### - -# There are no rewriting specifications in this default configuration file. - -# End of Exim configuration file |