diff options
Diffstat (limited to 'mail/smail')
| -rw-r--r-- | mail/smail/Makefile | 42 | ||||
| -rw-r--r-- | mail/smail/distinfo | 1 | ||||
| -rw-r--r-- | mail/smail/files/EDITME | 1225 | ||||
| -rw-r--r-- | mail/smail/files/freebsd2.0 | 73 | ||||
| -rw-r--r-- | mail/smail/pkg-comment | 1 | ||||
| -rw-r--r-- | mail/smail/pkg-descr | 6 | ||||
| -rw-r--r-- | mail/smail/pkg-plist | 60 | ||||
| -rw-r--r-- | mail/smail/scripts/configure | 6 |
8 files changed, 0 insertions, 1414 deletions
diff --git a/mail/smail/Makefile b/mail/smail/Makefile deleted file mode 100644 index ad3559819791..000000000000 --- a/mail/smail/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -# New ports collection makefile for: smail -# Version required: 3.1.29 -# Date created: 16 Oct 1994 -# Whom: torstenb -# -# $Id: Makefile,v 1.8 1995/05/05 21:44:54 torstenb Exp $ -# - -DISTNAME= smail-3.1.29.1 -CATEGORIES+= mail -MASTER_SITES= ftp://ftp.uu.net/networking/mail/smail/ - -MAINTAINER= torstenb@FreeBSD.ORG - -.if !exists(/usr/local/bin/bash) -DEPENDS= ${PORTSDIR}/shells/bash -.endif - -MAKE_FLAGS= "SHELL=/usr/local/bin/bash" - -pre-install: - mkdir -p ${PREFIX}/lib/smail - -post-install: - @cp ${WRKSRC}/samples/generic/config ${PREFIX}/lib/smail/config.sample - @cp ${WRKSRC}/samples/generic/directors ${PREFIX}/lib/smail/directors.sample - @cp ${WRKSRC}/samples/generic/routers ${PREFIX}/lib/smail/routers.sample - @cp ${WRKSRC}/samples/generic/transports ${PREFIX}/lib/smail/transports.sample - gzip -9nf ${PREFIX}/man/man1/pathto.1 ${PREFIX}/man/man1/uuwho.1 \ - ${PREFIX}/man/man1/uupath.1 ${PREFIX}/man/man5/smail.5 \ - ${PREFIX}/man/man8/pathalias.8 ${PREFIX}/man/man8/mkdbm.8 \ - ${PREFIX}/man/man8/mkline.8 ${PREFIX}/man/man8/mksort.8 \ - ${PREFIX}/man/man8/mkaliases.8 ${PREFIX}/man/man8/smail.8 \ - ${PREFIX}/man/man8/mkpath.8 ${PREFIX}/man/man8/pathmerge.8 \ - ${PREFIX}/man/man8/checkerr.8 ${PREFIX}/man/man8/getmap.8 \ - ${PREFIX}/man/man8/mkhpath.8 ${PREFIX}/man/man8/savelog.8 \ - ${PREFIX}/man/man8/mkuuwho.8 ${PREFIX}/man/man8/mailq.8 \ - ${PREFIX}/man/man8/sendmail.8 ${PREFIX}/man/man8/runq.8 \ - ${PREFIX}/man/man8/rmail.8 ${PREFIX}/man/man8/rsmtp.8 \ - ${PREFIX}/man/man8/smtpd.8 - -.include <bsd.port.mk> diff --git a/mail/smail/distinfo b/mail/smail/distinfo deleted file mode 100644 index 135685a84fec..000000000000 --- a/mail/smail/distinfo +++ /dev/null @@ -1 +0,0 @@ -MD5 (smail-3.1.29.1.tar.gz) = bbacbe152a5c00b1ecd875ae028100cd diff --git a/mail/smail/files/EDITME b/mail/smail/files/EDITME deleted file mode 100644 index 09115d6fa3a7..000000000000 --- a/mail/smail/files/EDITME +++ /dev/null @@ -1,1225 +0,0 @@ -# @(#)conf/EDITME-dist 1.50 9/10/92 01:07:17 -# -# EDITME - edit me to perform high level configuration of smail -# -# The EDITME file is used by makefiles to build individual defs.h, -# defs.sh and defs.sed files, which in turn control the build/install -# process of smail. -# -# The EDITME-dist file servers as a reference copy only. Patches to -# smail will refer to EDITME-dist rather than EDITME. Only the EDITME -# file is used in the build/install process. Any editing should be done -# to the file EDITME, which should be located in the same directory as -# EDITME-dist. -# -# The EDITME is a /bin/sh shell script. That is, comments begin with -# the first non-quoted/non-escaped '#' character. Values are set -# using NAME=VALUE or NAME=, with no spaces around the equal sign. -# Values that have spaces or special shell characters should be -# qouted and/or escaped. Consult the sh(1) man page for further details. -# -# Values that are indicated as optional may, in some cases, not be set. -# All other values MUST be set to some value. The NAME= form is -# equivalent to not setting the value, with the exception of TEST_BASE. -# -# An alternate path to the EDITME file can be specified through setting -# the environment variable SMAIL_EDITME. This can either be a full -# pathname or a relateive pathname, which will be referenced relative -# to the smail conf directory. Care must be taken with dependencies in -# makefiles when the path to the EDITME file has changed. If this is -# a permanent change, then type "make depend" at the top of the smail -# source tree. Otherwise the conf/lib/mkdefs.sh shell script can be -# run in affected directories to create new defs files. - - -# CFLAGS - the base set of flags for the cc command -# -# optional -# -# When debugging smail, it is useful to set this to "-g". Otherwise -# "-O" is normally used to optimize the code produced. -# -# NOTE: I get core dumps on SCO MPX 2.0 when using the bind router (I -# haven't tried other SCO releases). Whatever the problem is, it -# goes away when I compile without -O. If anybody finds the cause, -# please let me know. For now, if you get core dumps when using the -# bind router on SCO, try compiling without -O. - -CFLAGS=-O2 # common - -# CC - the C compiler to use for compiling smail -# -# optional (defaults to cc) -# -# CAUTION: gcc does not work with smail on all architecures. In -# particular, problems have been reported on the SunOS platform. The -# typical problem is that gcc uses different structure-passing -# conventions for function calls. This is a problem for a few -# networking calls which pass around in_addr structures. -# -# Some conf/os files set an alternate default value for CC. In -# particular, the SunOS CC defaults to /bin/cc, to ensure that -# /usr/sys5/cc is not used. - -#CC=gcc # use the GNU C Compiler - - -# LDFLAGS - flags to pass to the loader -# -# optional -# -# These flags are passed to the cc command before any object -# modules or libraries. - -#LDFLAGS=-L/usr/ucblib # use an alternate directory for libs -#LDFLAGS="-L/usr/ucblib -Bstatic" # and don't use shared libraries - - -# LIBS - libraries to include in binaries -# -# optional -# -# These libraries are passed to the cc command before any libraries -# mentioned in the conf/os file. It can be used to link in additional -# libraries before the system libraries. -# -# If you wish to use the GNU dbm library, then add -lgdbm to LIBS -# (perhaps with a -L to indicate the directory containing gdbm), -# and then add NDBM to the HAVE variable. - -#LIBS=-lgdbm # use the GNU dbm library -#LIBS="-L/usr/local/lib -lgdbm" # if gdbm is in /usr/local/lib -#LIBS="-L/usr/local/lib -lgdbm -lalloca" # load alloca function from somewhere - - -# OSLIBS - ending libraries to include in binaries -# -# optional -# -# These libraries are passed to the cc command after all other -# libraries from any other source. For example, this can be used -# to force the use of an alternate C library, or a shared version -# of the C library. -# -# Some conf/os files already specify use of the shared C library, and -# some necessary system libraries. - -#OSLIBS=-lc_s # SVR3 shared C library -#OSLIBS="-lc_s -lcposix" # POSIX and shared C libs - - -# STRIP - define this if you wish to strip binaries when installing -# -# optional -# -# The smail binaries will only be striped on installation if STRIP=yes. -# This may save some disk space at the expence of the ability to do -# symbolic debugging. - -STRIP=yes - - -# USE_SYMLINKS - define this if you wish to use symlinks when installing -# -# optional -# -# The smail binaries are normally installed using hardlinks between -# the various copies of the smail binary. Where hardlinks cannot be -# made, real copies are made. To use symbolic links instead of -# hard links and copies, set USE_SYMLINKS=yes. This will cause only -# one copy of the smail binary to be installed. Do not define this -# if your system does not have symbolic links. - -USE_SYMLINKS=yes - - -# OS_TYPE - define the operating system type for your machine -# -# required -# -# Consult the conf/os directory for a complete list of recognized -# operating system types. The names given below may not represent -# all of the operating systems for which an OS description file -# is available. - -#OS_TYPE=aix3.1 # IBM AIX 3.1 -#OS_TYPE=aix3.2 # IBM AIX 3.2 -#OS_TYPE=bsd4.2 # 4.2 BSD systems -#OS_TYPE=bsd4.3 # 4.3 BSD systems -OS_TYPE=freebsd2.0 # FreeBSD 2.0 (BSD 4.4Lite) -#OS_TYPE=cpc3.0 # Counterpoint C-XIX Release 3.0 -#OS_TYPE=forpro # fortune FOR:Pro 2.1 to 3.1 -#OS_TYPE=sco3.2 # SCO UNIX 3.2 -#OS_TYPE=sco3.2+tcp # SCO UNIX 3.2 with SCO TCP/IP -#OS_TYPE=sun_os3 # Sun/OS version 3.x -#OS_TYPE=sun_os4 # Sun/OS version 4.x -#OS_TYPE=sys5.2 # System V release 2 -#OS_TYPE=sys5.3 # System V release 3 -#OS_TYPE=sys5.4 # System V release 4 -#OS_TYPE=ultrix1.2 # DEC Ultrix release 1.2 -#OS_TYPE=unixpc3.0 # AT&T Unix PC (3b1) release 3.0 -#OS_TYPE=unixpc3.5 # AT&T Unix PC (3b1) release 3.5 -#OS_TYPE=uts1.2 # UTS/580 release 1.2 -#OS_TYPE=uts2.0 # UTS/580 release 2.0 -#OS_TYPE=xenix5 # SCO Xenix System V -#OS_TYPE=xenix5+tcp # SCO Xenix System V with TCP/IP -#OS_TYPE=isc2.2.1 # Interactive release 2.2.1 -#OS_TYPE=delta # Motorola delta -#OS_TYPE=mips-bsd4.3 # MIPS Risc/OS in bsd universe -#OS_TYPE=3b2-s5.3+win # 3b2 with SVR3.2 and WIN TCP/IP - - -# ARCH_TYPE - architecture type -# -# required -# -# The ARCH_TYPE of 16bit refers to machines with 16 bit words. This -# mode is untested. It is assumed that 16bit machines have extended -# address spaces as smail is more than 64k bytes long. - -ARCH_TYPE=32bit # common -#ARCH_TYPE=small32bit # 32 bit without reasonable VM -#ARCH_TYPE=16bit # untested - - -# DRIVER_CONFIGURATION - configuration file describing smail drivers -# -# optional -# -# By default, the os configuration file (conf/os/OS_TYPE) refers to -# the file that describes the available director, router and transport -# drivers. -# -# For example on BSD-based OS_TYPEs, the os configuration file refers to -# a driver configuration that uses BSD networking. A BSD based system -# could not set DRIVER_CONFIGURATION and get the BSD netwokring based -# drivers; or a system could set DRIVER_CONFIGURATION=unix-generic and -# disable BSD networking drivers. -# -# Currently few conf/os files specify the arpa-network driver -# configuration (which includes support for the BIND server). -# If you want to use this, you must usually set DRIVER_CONFIGURATION -# explicitly. You may also have to add BIND to the HAVE list (later -# in this file) to use the arpa-network driver configuration. -# -# IMPORTANT NOTE FOR INTERNET HOSTS -# -# NOTE: The bind router driver is not configured into the compiled-in -# routers, so you will need to install a routers file to use it. Get -# a routers file from samples/generic/routers and copy it to -# /usr/lib/smail. Comment out the first version of inet_hosts from -# that file, and uncomment the second (the bind version) of the -# router. You may also want to uncomment the forcepaths router, if -# you forward for any hosts in the UUCP zone. - -#DRIVER_CONFIGURATION=unix-generic # no BSD networking -#DRIVER_CONFIGURATION=$ROOT/mydriver.cf # customized configuration -#DRIVER_CONFIGURATION=arpa-network # include bind router - - -# LMAIL - where the real /bin/mail resides -# -# optional -# -# On many System V machines, the /bin/mail program will deliver what -# it thinks is local mail directly into user mailboxes, and may also -# call uucp, or some other remote delivery mechanism. The /bin/mail -# program will therefore can bypass smail. -# -# A solution to this program is to move the /bin/mail supplied with -# your system to another name, LMAIL, and to then install the binmail -# program, in pd/binmail as /bin/mail. If binmail is invoked to read -# mail, the LMAIL (old /bin/mail) is called, otherwise SMAIL is called -# to deliver mail. -# -# If LMAIL is defined below and the specified file does not exist, -# then the binmail makefile install rule will attempt to move -# /bin/mail to LMAIL and then copy binmail into /bin/mail. If LMAIL -# is defined and the file LMAIL does exist, then the binmail -# makefile will refuse to install binmail. -# -# If LMAIL is not defined then /bin/mail is not touched. -# -# NOTE: due to potential problems or confusion with binmail -# installation, binmail is not automatically built and installed -# from higher level makefiles. One must go to the pd/binmail -# directory and "make install" explicitly. - -#LMAIL=/bin/lmail # standard System V - - -# MISC_DEFINES - miscellaneous definitions -# -# optional -# -# A colon-separated list that names miscellaneous macros to define -# for C programs and shell scripts. Each entry in the list can be -# a simple name, or the name can be followed by an equal sign to -# provide a value. For example: -# -# MISC_DEFINES="void=int:DECLARE_UTIMBUF:NO_FORWARDTO_FILE" -# -# Defines void to be int for compilers that do not correctly support -# the void type, and declares the macro DECLARE_UTIMBUF, so that smail -# will not try to get the utimbuf structure from a header file. -# -# -# IMPORTANT FOR INTERACTIVE UNIX USERS: -# -# Some versions of Interactive UNIX have a <sys/socket.h> header -# file that directly includes the <time.h> header file, which is -# not protected against multiple inclusion. If your system has -# this problem, you will encounter a multiple declaration problem -# when compiling src/modes.o. To repair the situation, use: -# -# MISC_DEFINES=ISC_SOCKET_TIME_BUG -# -# -# IMPORTANT FOR BSD AND SUNOS USERS: -# -# Some mail readers compare access and modify times to determine -# whether mail has been delivered which has not been read. The local -# mail transport (using the appendfile driver) preserves access time -# for files so that this will work. However, if smail is configured -# to use the System V convention of reading forwarding information -# from user mailbox files, then this will be defeated (the forwardto -# director does not preserve access times). -# -# Since BSD systems (and System V systems running Smail) have little -# reason to use the System V forwarding convention, it is sufficient -# to disable it. To disable the System V forwarding convention, add -# NO_FORWARDTO_FILE to MISC_DEFINES. -# -# -# IMPORTANT FOR USERS OF OLD BIND RELEASES -# -# The bind resolver can make use of features in newer releases of -# BIND (named). In particular, it will use the res_search function, -# rather than older res_mkquery function. If you do not have the -# new BIND release (e.g., res_search is listed as an undefined -# variable when you link smail), then add OBSOLETE_RESOLVER to -# MISC_DEFINES. Also, the res_search function does not appear to -# interract correctly with the 'defnames' attribute to the bind -# driver, on some versions of the resolv library, so beware. If bind -# doesn't work for you, try defining OBSOLETE_RESOLVER. -# -# -# IMPORTANT FOR USERS OF SOME SEQUENT OS RELEASES -# -# Some releases of the Sequent C compiler recognize private as a keyword. -# However, smail uses this as a variable or structure name in several -# places. To get around this problem use: -# -# MISC_DEFINES=private=smail_private_tag -# -# -# IMPORTANT FOR NON-POSIX OPERATING SYSTEMS -# -# Smail uses the utime() system call to set file times in a few places. -# All U*IX releases appear to support this call, although not all -# systems define the structure (utimbuf) used as an argument to the -# call. In particular, true 4.2 and 4.3BSD do not declare this -# structure (at least not the original, non-POSIX, 4.3BSD release). -# -# The bsd4.2 and bsd4.3 conf/os files define DECLARE_UTIMBUF to cause -# smail itself to define this structure. However, this may fail if -# your system is extended to define the utimbuf structure in an -# incompatible fashion. This can be disabled by defining -# NO_DECLARE_UTIMBUF in MISC_DEFINES. -# -# For other operating systems, you may need to add DECLARE_UTIMBUF -# in MISC_DEFINES. Some releases of Interactive U*IX require this. -# Other releases don't (I don't have a list). -# -# -# IMPORTANT FOR USERS OF GCC ON NON-ANSI C SYSTEMS -# -# If you are using a C compiler that defines __STDC__ (such as gcc) but -# you are running into problems due to non-ANSI #include files or missing -# ANSI definitions, then you can define NO_ANSI_C. - -#MISC_DEFINES=ISC_SOCKET_TIME_BUG -#MISC_DEFINES=NO_FORWARDTO_FILE # recommended for BSD systems -#MISC_DEFINES=ISC_SOCKET_TIME_BUG:NO_FORWARDTO_FILE -#MISC_DEFINES=OBSOLETE_RESOLVER -#MISC_DEFINES=DECLARE_UTIMBUF # if smail must define utimbuf struct -#MISC_DEFINES=NO_DECLARE_UTIMBUF # if smail must _not_ define utimbuf -#MISC_DEFINES=private=smail_private_tag # for sequent -#MISC_DEFINES=NO_ANSI_C # don't believe __STDC__ - - -# HAVE - miscellaneous supported features -# -# optional -# -# A colon-separated list of features that the local system supports -# in addition to those defined in the OS configuration file. Some -# interesting features you might want to list are: -# -# NDBM - this system supports the new DBM library -# functions introduced in 4.3BSD. -# DBM - this system supports the old DBM library -# distributed with older BSD systems and -# many System V systems. This *requires* the -# dbmclose() function, which does not exist -# in most historic dbm implementations. -# HDB_UUCP - this system uses HoneyDanBer UUCP, rather -# than a traditional version of UUCP. -# NIALIAS - aliases with NeXT NetInfo databases. -# BIND - the system supports the bind resolver library -# -# Defining NDBM or DBM may require the specification of additional -# libraries, in LIBS or in OSLIBS. See conf/os/template for a more -# complete list of recognized features, and for more detailed -# descriptions. If neither NDBM or DBM is specified, Ozan Yigit's -# sdbm (an ndbm workalike) will be used. -# -# CAUTION: The HoneyDanBer UUCP in System V Release 4.0 uses multi- -# letter message grade values, rather than the traditional -# single-letter message grades in earlier versions. Smail -# presumes that message grades are single letters, so Smail and -# the default grades for SVR4.0 are incompatible. -# -# As a result of this incompatiblity, either HDB_UUCP must not -# be defined with SVR4.0, or the message grades that smail -# uses will have to be added to the file /etc/uucp/Grades. -# The list of grades that smail will use is specified in the -# grades variable (whose default value can be specified by -# setting GRADES in this file). Grades are specified by -# providing a longer string in the Precedence: field. The -# grade letters for the default value of GRADES are: -# -# 9 - special-delivery -# A - air-mail -# C - first-class (also the default message grade) -# a - bulk -# n - junk -# -# To add the default letters, you might add the following lines -# to /etc/uucp/Grades: -# -# 9 9 Any User Any -# A A Any User Any -# C C Any User Any -# a a Any User Any -# n n Any User Any - -#HAVE=HDB_UUCP # have HoneyDanBer UUCP -#HAVE=NDBM # have the new DBM functions -#HAVE=DBM # have the old DBM functions -#HAVE=HDB_UUCP:NDBM # new DBM and HoneyDanBer UUCP - -# UUCP_ZONE - this host is within the UUCP zone -# -# optional (defaults to undefined) -# -# Smail supports both strictly compliant SMTP transfers, and a -# modification the the SMTP protocol for use within the UUCP zone. -# The modified protocol transmits sender and recipient addresses in -# accordance with the RFC976 specification, and provides behavior that -# is more likely to work with other mailers in the UUCP zone. -# Transferring mail using SMTP over private IP networks can work well -# within the UUCP zone, except for the fact that the SMTP -# specification doesn't work as well in the presence of generated -# UUCP-zone routes form path files. -# -# The built-in smail transport definitions include transport -# definitions that provide either behavior: inet_zone_smtp and -# uucp_zone_smtp. The first provides conformant behavior and should -# be used when transferring mail to sites on the Internet. The -# second, uucp_zone_smtp, provides the modified protocol. -# -# An additional builtin transport protocol, smtp, is defined as having -# the same behavior as inet_zone_smtp or uucp_zone_smtp, depending -# upon whether UUCP_ZONE is set. To make the the basic smtp transport -# use the modified behavior for the UUCP zone, set UUCP_ZONE to true. -# -# In the presence of generated routes from paths files, the -# Internet-zone version of the SMTP transport will generate route-addr -# addresses. The introduction of RFC1123 removes the requirement that -# route-addrs work as routes, preferring instead the use of the % -# operator for routing. Intermixed % and ! operators, particularly in -# the presence of an @ operator (e.g., veritas!mitsu%tron@apple.com), -# are sufficiently ambiguous that it is undesirable to use with ! or % -# operators for routing when strict SMTP compliance is needed. This -# is one of the motivations for introducing the modified UUCP-zone -# protocol. However, generating route-addr addresses works well for -# transferring mail between nodes running Smail 3.1. -# -# NOTE: the UUCP_ZONE flag does not affect the batched SMTP transports -# that operate through UUCP. The uusmtp and demand_uusmtp transports -# always operate with the modified UUCP-zone protocol. Two additional -# transports, inet_uusmtp and inet_demand_uusmtp use compliant -# protocols. - -#UUCP_ZONE=true # this site is in the UUCP zone -#UUCP_ZONE= # this site is on the Internet - - -# HOSTNAMES - names for the local host -# -# optional -# -# The HOSTNAMES value is a colon-separated list of names your system. -# This does not need to include the name given by UUCP_NAME. If -# HOSTNAMES is set, then the first name in the list will be used as the -# canonical name of your system. That is, the name by which your -# machine can be uniquely named across all networks. -# -# Normally HOSTNAMES is not set. In this case the HOSTNAMES value will -# be computed at run-time from the DOMAINS value and the system-dependently -# computed name of your system. -# -# If you are registered in a domain, you might consider seting HOSTNAMES -# to a list such as: sitename.subdom.dom:sitename.dom:sitename.uucp -# -# NOTE: It is preferable, in most circumstances, to set the hostnames -# variable in /usr/lib/smail/config, rather than setting HOSTNAMES -# in this file. The value of the "hostnames" variable in the config -# file can be changed without recompiling smail. - -#HOSTNAMES=kgbvax.ussr.comm:kgbvax.uucp # example only - - -# DOMAINS - domains under which the local host resides -# -# optional (except when HOSTNAMES is not set) -# -# If HOSTNAMES is not defined, then HOSTNAMES is computed by concatenating -# local host's actual name with each name in this colon-separated list of -# domain names. This computation is done at run-time. -# -# Example: if DOMAINS="uts.amdahl.com:uucp", then the HOSTNAMES value -# for the site "amdahl" would become "amdahl.uts.amdahl.com:amdahl.uucp". -# -# NOTE: The uucp domain is not meaningful in any standard way, though -# many sites treat this as implying any site that is registered -# in the UUCP zone through the USENET maps. Sites that really -# wish to be able to receive mail from anywhere in the world -# should get a registered domain. -# -# NOTE: It is preferable, in most circumstances, to set the domains -# variable in /usr/lib/smail/config, rather than setting DOMAINS -# in this file. The value of the "domains" variable in the config -# file can be changed without recompiling smail. - -#DOMAINS=uucp # common -#DOMAINS=ussr.comm:uucp # example only - - -# UUCP_NAME - name for the local host on the UUCP network -# -# optional -# -# This should be set to the name of the local host as known by the -# UUCP software. -# -# Normally, no value is given for this variable, in which case the -# value will be computed by smail at run-time from the actual name for -# local host, as computed in a system-dependent fashion. -# -# NOTE: It is preferable, in most circumstances, to set the uucp_name -# variable in /usr/lib/smail/config, rather than setting UUCP_NAME -# in this file. The value of the "uucp_name" variable in the config -# file can be changed without recompiling smail. - -#UUCP_NAME=kgbvax # example only - - -# VISIBLE_NAME - local host name used in outgoing addresses -# -# optional -# -# Some installations may wish to hide a group of machines under a common -# name. For example, at Amdahl, we may wish to hide the machines on our -# ethernet under the domain "uts.amdahl.com". If we set the value -# VISIBLE_NAME="uts.amdahl.com" on the machine "futatsu", then mail -# from "futatsu" sent as if it came from "user@uts.amdahl.com" rather than -# "user@futatsu.uts.amdahl.com". Of course, the "uts.amdahl.com" gateways -# will need to forward mail to "user", however the fact that a user -# does not have check for mail on all machines on the network is useful. -# -# The VISIBLE_NAME value will not be recognized as a name for the local -# host unless it is also included in one of the other lists of names for -# the local host. -# -# NOTE: It is preferable, in most circumstances, to set the visible_name -# variable in /usr/lib/smail/config, rather than setting VISIBLE_NAME -# in this file. The value of the "visible_name" variable in the config -# file can be changed without recompiling smail. - -#VISIBLE_NAME=kgbvax.uucp # example only - - -# GATEWAY_NAMES - more names for the local host -# -# optional -# -# It is often important that hosts which are domain gateways recognize -# the domain names as alternate names for the local host. These names -# should be defined in addition to those computed automatically from -# the actual name for the local host by putting them in GATEWAY_NAMES. -# -# This variable is a colon-separated list of names for the local host -# which is not computed from the actual name for the local host. -# -# NOTE: It is preferable, in most circumstances, to set the gateway_names -# variable in /usr/lib/smail/config, rather than setting GATEWAY_NAMES -# in this file. The value of the "gateway_names" variable in the config -# file can be changed without recompiling smail. - -#GATEWAY_NAMES=moscow.ussr.comm:ussr.comm:comm # example only - - -# AUTH_DOMAINS - domains for which this host is authoritative -# -# optional (defaults to none) -# -# If this host contains all routing information needed for a particular -# set of domains, then smail should generate an error if it is given a -# hostname that is not resolved, but is within one of those domains. -# Normally, this isn't a problem because mail that is not matched by -# any routers generates a "host not found" error. However, the -# smarthost router can upset this by matching any hostname. Without -# something to generate an error, a mail loop can occur where mail -# is sent to a host that controls a domain, and that host sends mail -# to another host listed as the "smarthost", which sends it back. -# -# A host which contains all routing information for a domain is called -# "authoritative" for that domain. A host can be authoritative for -# any number of domains. To declare this host to be authoritative -# for this domain, set AUTH_DOMAINS here (or auth_domains in the -# /usr/lib/smail/config file) to a colon-separated list of domains. -# This will prevent the smarthost router from matching any hosts within -# the indicated domains. -# -# NOTE: It is preferable, in most circumstances, to set the auth_domains -# variable in /usr/lib/smail/config, rather than setting AUTH_DOMAINS -# in this file. The value of the "auth_domains" variable in the config -# file can be changed without recompiling smail. - -#AUTH_DOMAINS=ussr.com -#AUTH_DOMAINS=veritas.com:tolerant.com - - -# POSTMASTER - the default address for the mail administrator -# -# optional (defaults to root) -# -# This address is used by smail as a last resort in trying to deliver -# to the address "postmaster". Normally, "postmaster" is aliased to a -# responsible person, or persons through the alias file. In the event -# that no alias file exists, or that "postmaster" was not found in -# that file or by any other directors, the default address will be -# used. - -#POSTMASTER=root - - -# NOBODY - a user with few access capabilities -# -# optional -# -# The user named here will be used by smail whenever a user ID is -# desired that cannot do any more damange than any unpriveledged user -# on the system. Under 4.3BSD and SunOS, this would be the user named -# "nobody". Under other operating systems, it may be reasonable to -# create a "nobody" entry in the passwd file. Some systems have a -# user such as "unknown" which will suffice. -# -# If this is not defined, then a default will be chosen. This default -# is os-type dependent, and is commonly nobody for BSD- and sun-derived -# systems. - -NOBODY=nobody -#NOBODY=unknown # some sites have this in their passwd file - - -# TEST_BASE - directory where smail test files are kept -# -# optional (special when defined to an empty string) -# -# When testing smail, it is convenient to put binaries and configuration -# files in an area separated from the actual installation areas. The -# TEST_BASE directory defines this alternate area. Smail will assume -# assume a fixed hierarchy below this directory, with a "bin" subdirectory -# containing the smail binary and utilities, a "lib" directory containing -# smail configuration files, and a "spool" directory containing smail -# spool files. -# -# If no TEST_BASE is defined, then this facility is turned off. If a -# TEST_BASE is defined to be an empty string, then all programs will be -# used in the area where they are compiled, LIB_DIR will be set to the -# "lib" directory under the root of the smail source tree, and SPOOL_DIRS -# will be set to the "spool" directory under the root of the smail source -# tree. In this case, a "make install" is not required. -# -# If a TEST_BASE is defined as a relative path (e.g. "."), then it is -# defined relative to the root of the smail source directory. - -#TEST_BASE=/usr/project/smail -#TEST_BASE=test -#TEST_BASE= # use progs in source area - - -# SMAIL_BIN_DIR - directory where copies of the smail binary are kept -# -# optional -# -# The Smail program comes in user callable names: smail, uupath, -# pathto, optto, and so on. A copy of smail will be linked to files -# under SMAIL_BIN_DIR. The SMAIL_BIN_DIR should be a directory -# that is commonly in users search path (i.e., $PATH). - -SMAIL_BIN_DIR=!!PREFIX!!/bin # BSD local convention - -# SMAIL_NAME - file where the primary working copy of smail is located -# -# optional -# -# Any program that needs to call smail, including smail itself will -# attempt to execute the program named by SMAIL_NAME. -# -# Often the primary working copy of smail is /usr/lib/sendmail. This -# should be used for systems that used to run sendmail. Programs such -# as Berkeley Mail, System V mailx or /bin/mail can be made to, or do -# call /usr/lib/sendmail for mailer activity. It is common for public -# domain programs to expect a mailer to exist under this name, also. -# -# If SMAIL_NAME is not defined here, or is set to a null string, then -# $SMAIL_BIN_DIR/smail is used instead. If this is the name that you -# want to use as the primary binary pathname, then do set SMAIL_NAME -# to the null string. This will prevent the smail src/Makefile from -# installing it as $SMAIL_BIN_DIR/smail twice. - -#SMAIL_NAME=/usr/lib/sendmail # common convention -#SMAIL_NAME= # use smail in bin directory - - -# OTHER_SMAIL_NAMES - other names under which to install smail -# -# optional -# -# Many systems will wish to install smail as /bin/rmail to catch mail -# coming in over UUCP directly with smail. To install under this -# name set OTHER_SMAIL_NAMES to /bin/rmail. As implied by the name, -# other pathnames can be specified as well, if a system has other -# potential rendezvous points for mail. This should be a colon or -# white-space separated list of full pathnames. -# -# Users of XENIX may wish to use smail as their execmail interface. -# To do this, add /usr/lib/mail/execmail to this list. -# -# This is assumed to be empty when TEST_DIR is defined. -# -# NOTE: A pathname CANNOT be in both SMAIL_NAME and OTHER_SMAIL_NAMES. - -OTHER_SMAIL_NAMES=!!PREFIX!!/bin/rmail - -# LIB_DIR - directory where various smail files are found -# -# required -# -# The LIB_DIR is where various static smail files reside, by default. -# Files which may reside under this directory are: the primary config -# file, the directors, routers and transports files, an aliases file, -# pathalias database, uuwho database, and the COPYING file. -# -# The common subdirectories under LIB_DIR are: "methods", where method -# files are by default found; "maps", where local pathalias files, -# mkmap configuration files and the getmap batch file are located; -# and "lists" where mailing lists are commonly located. -# -# It should be noted that none of these files, except for COPYING, -# is required by the smail binary as it is released. See smail(5) -# and smail(8) for more details on this and related topics. - -LIB_DIR=!!PREFIX!!/lib/smail - - -# UTIL_BIN_DIR - directory where smail utilities are located -# -# required -# -# The smail system has a number of programs such as pathalias, mkline, -# mksort, mkdbm that users normally need not execute directly. Such -# utilities will be placed under the UTIL_BIN_DIR directory. -# -# UTIL_BIN_DIR is often the same as LIB_DIR. - -UTIL_BIN_DIR=$LIB_DIR/util - - -# NEWALIASES - alternate pathname for mkaliases program -# -# optional -# -# For compatibility with sendmail, mkaliases can be installed under -# a name such as /usr/ucb/newaliases, or /usr/lib/newaliases. To setup -# smail to perform this installation, set NEWALIASES to the desired full -# pathname. When testing, this is set to the empty string, signifying -# that mkaliases will be installed only under the name mkaliases. - -NEWALIASES=$UTIL_BIN_DIR/newaliases - -# SECOND_CONFIG_FILE - pathname of an alternate config file -# -# optional -# -# Smail allows one to have a second set of configuration files that can -# override both the compiled in and the optional primary config file. -# Normally, the path to this secondary configuration file is defined -# in the primary smail configuration file. However the value -# SECOND_CONFIG_FILE can be the filename of the secondary (alternate) -# config file. In the case where both this value, and where the -# LIB_DIR/config file specifies a "second_config_file" value, the -# LIB_DIR/config file takes presidence. -# -# A secondary configuration file is useful in an environment with -# distributed filesystems. In such an environment, the regular config -# directory can be maintained centrally on a remotely mounted -# filesystem. Individual machines, can then setup a secondary -# configuration file which overrides these centrally maintained files -# for specific purposes. - -# For example, in a network with one gateway to the outside world, -# all could share the same smail binaries and standard configuration. -# However the the gateway machine could have a secondary configuration -# file which so that the gateway's the smail setup has greater intelligence -# and thus act as a smart_user and smart_path host. - -SECOND_CONFIG_FILE= # common for non-NFS systems -#SECOND_CONFIG_FILE=/private/usr/lib/smail # convention for NFS systems - - -# PATHS_FILE, PATHS_TYPE - location and type of the paths database -# -# optional -# -# If PATH_FILE begins with a '/', then it is the name of the optional -# pathalias database, otherwise it is assumed that PATH_FILE refers to -# a file under the LIB_DIR directory. -# -# For use with YP, it may be more convenient to use the "yp" type, -# rather than "aliasyp", because this way a paths file can be maintained -# in a format compatible with other YP maps. -# -# If PATHS_FILE is left undefined, no paths file is defined in the -# preloaded smail configuration. - -PATHS_FILE=paths # for file under LIB_DIR -#PATHS_FILE=mail.paths # YP (NIS) - -#PATHS_TYPE=dbm # indexed -#PATHS_TYPE=bsearch # sorted -PATHS_TYPE=lsearch # linear search -#PATHS_TYPE=yp # YP (NIS) - -# ALIASES_FILE, ALIASES_TYPE - location and type of the aliases database -# -# optional -# -# If ALIASES_FILE begins with a '/', then it is the full pathname of the -# optional aliases database, otherwise it is assumed that ALIASES_FILE -# refers to a file under the LIB_DIR directory. -# -# For use with YP, it may be more convenient to use the "yp" type, -# rather than "aliasyp", because this way an alias file can be maintained -# in a format compatible with other YP maps. -# -# NOTE: If ALIASES_TYPE is specified as bsearch, then the suffix .sort -# will be appended to the filename given in ALIASES_FILE. The -# mkaliases command will then treat a file without that suffix -# as the unsorted source file for the database. -# -# If ALIASES_FILE is left undefined, no aliases file is defined in the -# preloaded smail configuration. -# -# NOTE FOR AIX SYSTEMS: -# I have received reports that AIX3.1 requires use of "yp", -# rather than "aliasyp". If this is true, I don't quite see -# how Suns and RS/6000s running sendmail can share the same -# YP maps. In any case, use whatever works in your -# environment. - -ALIASES_FILE=$LIB_DIR/aliases # compatible with sendmail -#ALIASES_FILE=aliases # for file under LIB_DIR -#ALIASES_FILE=mail.aliases # YP (NIS) -#ALIASES_FILE=NetInfo # for NeXT NetInfo aliases - -ALIASES_TYPE=dbm # compatible with sendmail -#ALIASES_TYPE=lsearch # for sites without dbm(3x) -#ALIASES_TYPE=bsearch # for sorted files, faster -#ALIASES_TYPE=aliasyp # YP (NIS) -#ALIASES_TYPE=nialias # for NeXT NetInfo aliases - - -# ALIASES_REMOVE_SENDER - remove the sender (by default) from alias expansions -# LISTS_REMOVE_SENDER - remove the sender (by default) from list expansions -# -# optional -# -# For compatibility with sendmail, smail can be configured to remove the -# sender of a message (if the sender is a local user) from alias -# expansions. Users can disable this feature by invoking smail with -# the -m flag, typically by setting "metoo" in their .mailrc file. -# -# However, many people find this behavior confusing and some administrators -# would prefer to disable this "sender removal" feature altogether. -# Also, it has recently been noticed that smail's sender removal -# behavior is not quite sendmail-compatible with regards to nested -# aliases and have been surprised by the results of aliasing. -# -# Smail supports two forms of aliasing to which sender removal can be -# applied: the regular aliases file (defined by ALIASES_FILE above), and -# a directory of mailing lists (typically /usr/lib/smail/lists) where -# all files in that directory define a list. A site that has converted -# entirely over to smail3 can use alias files strictly for username -# aliasing, while using the lists directory for real mailing lists. With -# such a usage model, sender removal should be disabled for the alias -# file, but can be enabled (depending upon preference) for the lists -# directory. -# -# To enable sender removal, set ALIASES_REMOVE_SENDER or LISTS_REMOVE_SENDER -# (depending upon preference) to "yes". If these values are empty, or are -# note defined, then sender removal is disabled. -# -# This behavior can be configured using the run-time directors configuration -# file by setting the "sender_okay" flag, to indicate that sender removal -# should NOT be done. - -#ALIASES_REMOVE_SENDER=yes -LISTS_REMOVE_SENDER=yes - - -# RETRY_INTERVAL - minimum per-host retry interval for TCP/IP delivery -# RETRY_DURATION - maximum time to keep messages in the input queue -# -# optional (RETRY_INTERVAL defaults to 10 minutes, RETRY_DURATION to 5 days) -# -# Messages to hosts on TCP/IP networks may block for quite some time, if -# the recipient host is down, or some intervening network is inoperative. -# Connections to such unreachable or downed hosts can block for quite -# some time until a timeout indicates indicates that the condition -# exists. -# -# To prevent the mail queue from blocking repeatedly on the same set of -# unreachable hosts, smail keeps a directory of files that store the -# last connection failure encountered for each host. Message deliveries -# to a host that has failed recently will be deferred until a certain -# period of time (the retry interval) has elapsed, preventing queue runs -# from hanging again immediately. -# -# If a host is down for an extended period of time (such as forever), -# then sending a message to the message sender is preferable to keeping -# the message in our mail queue. If message deliveries to a particular -# host have not succeeded within a particular length of time (the retry -# duration), smail considers delivery to have failed, and sends a bounce -# notification to the sender or address owner. -# -# Retry durations and intervals for specific hosts or domains can be -# defined by creating a retry file in $LIB_DIR and adding lines of -# the form: -# -# hostname duration/interval -# *.domain duration/interval -# -# A default can be added at the end of this file with: -# -# * duration/interval -# -# Alternately, a default can be specified by setting RETRY_INTERVAL -# and RETRY_DURATION in this file. Both values are in seconds. To -# help in calculating, 1 day is 86400 seconds. You can actually -# use C constant expressions here, if you want to use addition or -# multiplication. -# -# These values can also be set using the retry_interval and -# retry_duration variables in $LIB_DIR/config. In the config file -# and in the retry file, times can be specified with suffixes, such -# as 'm', 'h', or 'd' to indicate minutes, hours, or days. For -# example: -# -# *.uu.net 3d/10m - -RETRY_INTERVAL=600 # 10 minutes -#RETRY_INTERVAL='20*60' # 20 minutes -RETRY_DURATION='86400*5' # 5 days -#RETRY_DURATION='86400*14' # 2 weeks - - -# UUCP_SYSTEM_FILE - path to UUCP file containing remote systems -# -# optional -# -# The normal smail configuration defines a router that scans the -# output of the /usr/bin/uuname command for neighboring UUCP sites. -# When smail is running as a daemon, it can cache the output of uuname -# so that the uuname command need not be executed for each mail -# message. In order to be able to detect when the output of uuname -# will change, smail daemons will stat the UUCP configuration file -# which contains the names of neighboring hosts. This EDITME variable -# defines the full pathname to this file. If this variable is not -# defined, then the output of the uuname will not be cached. -# -# NOTE: Many OS files specify the correct file for this, though some -# don't. Also, if you add HoneyDanBer UUCP to a system that -# does not normally have it, then you will need to set this. - -#UUCP_SYSTEM_FILE=/usr/lib/uucp/L.sys # use this for normal UUCP -#UUCP_SYSTEM_FILE=/usr/lib/uucp/Systems # use this for HoneyDanBer UUCP -#UUCP_SYSTEM_FILE=/etc/uucp/Systems # for System V Release 4 - - -# SPOOL_DIRS - smail spooling directories -# -# required -# -# Smail can use one or more spooling directories, where spool directories -# other than the first are used if earlier spool directories were -# inaccessible or were on file systems which filled up. The list of spool -# directories should be colon-separated and may contain only one spool -# directory if desired. - -SPOOL_DIRS=/var/spool/smail # common -#SPOOL_DIRS=/var/spool/smail # for System V Release 4 -#SPOOL_DIRS=/usr/spool/smail:/usr2/spool/smail # use of alternate filesystem -#SPOOL_DIRS=/usr/smail/spool # I use this right now -#SPOOL_DIRS=/var/smail/spool # Another alternative - - -# LOG_DIR - smail logging directory -# -# optional (defaults to (more or less) $SPOOL_DIRS/log) -# -# Smail creates two log files in this directory: logfile and paniclog. -# The first is a file that logs all incoming messages and deliveries, -# plus many errors. The second file (paniclog) logs important system -# errors that smail can manage to write into the log file. - -#LOG_DIR=/usr/spool/smail/log # common -LOG_DIR=/var/spool/smail/log # for System V Release 4 -#LOG_DIR=/usr/smail/log # I use this right now -#LOG_DIR=/var/smail/log # Another alternative - - -# UNSHAR_MAP_DIR - where unshared USENET map files are to be placed -# -# optional -# -# The getmap utility will read a list of files on the file -# LIB_DIR/map/batch, and using unsharmap unshar these maps into the -# UNSHAR_MAP_DIR directory. -# -# A common way that maps are distributed is through the USENET news group -# "comp.mail.maps". A sys file line of: -# -# usenet-maps:comp.mail.maps,world:F:<UNSHAR_MAP_DIR>/work/batch -# -# will add names into the UNSHAR_MAP_DIR/work/batch file for getmap to -# process. -# -# If UNSHAR_MAP_DIR is not defined, then the getmap and uuwho utilities -# will not function. - -UNSHAR_MAP_DIR=/var/spool/uumaps -#UNSHAR_MAP_DIR=/var/spool/uumaps # for System V Release 4 - - -# NEWS_SPOOL_DIR - where news articles are stored -# -# optional (defaults to /usr/spool/news) -# -# C News stores pathnames in the batch file that are relative to -# the top-level of the news article directory hierarchy. Smail needs -# to know the name of this directory in order to be able to extract -# the news articles from comp.mail.maps. - -#NEWS_SPOOL_DIR=/usr/spool/news -NEWS_SPOOL_DIR=/var/spool/news - - -# UUWHO_FILE - file used to store the uuwho file -# -# optional (defaults to $LIB_DIR/uuwho) -# -# This specified the file used to store the host database generated by -# and used by the uuwho command. If the uuwho database is stored in a -# DBM file, then UUWHO_FILE is the file prefix before adding the .pag -# and .dir suffixes to form the actual files. -# -# If UUWHO_FILE does not begin with /, then the name is relative to -# the $LIB_DIR directory. - -#UUWHO_FILE=$UNSHAR_MAP_DIR/uuwho # to store database with the map files - - -# UUWHO_USE_DBM - configure the uuwho command to use the DBM library -# -# optional -# -# If you would like the uuwho utility to use the DBM library, set -# UUWHO_USE_DBM to true. If this is not set, then the uuwho utility -# will use a sorted database. Earlier versions of the uuwho utility -# worked only with the DBM library. -# -# Not using DBM does not result in any real measurable speed-up, since -# binary searches of even large databases happen fast enough to -# prevent users from noticing. However, generation of the DBM uuwho -# database can take significantly longer. The uuwho utility creates -# sorted databases by calling the sort utility, which is usually quite -# fast. - -UUWHO_USE_DBM=true # use DBM -#UUWHO_USE_DBM= # default, don't use DBM - - -# TMP_DIR - secure temp directory used by smail utilities -# -# optional (defaults to /tmp) -# -# Some smail utilities use TMP_DIR to define a directory in which -# their temporary files can be created. Utilities that use this -# directory are those that wish to use a secure temporary area. -# -# The only smail utilities that need to use TMP_DIR are utilities that -# should be run as root, or as some other user with appropriate privledges. -# It is therefore recommended that TMP_DIR not be globally writable. - -TMP_DIR=/var/tmp - - -# SECURE_PATH - path for smail utilities -# -# optional (defaults to system-specific path or /bin:/usr/bin) -# -# The smail utilities often set their PATH to begin with the SECURE_PATH. -# The SECURE_PATH should be a path of directories where standard commands -# are located. These directories and commands should not be writeable by -# normal users. A common directory for smail utilities to append to -# SECURE_PATH is UTIL_BIN_DIR. - -#SECURE_PATH=/bin:/usr/bin:/usr/ucb # common for BSD systems -#SECURE_PATH=/bin:/usr/bin:/usr/amdahl/bin # common for UTS/580 systems -#SECURE_PATH=/bin:/usr/bin # common for System V system - - -# MAN1 - where smail user command man pages are to be installed -# MAN5 - where smail file format man pages are to be installed -# MAN8 - where smail administrator man pages should be installed -# MAN1_EXT - file extension for user command man pages -# MAN5_EXT - file extension for file format man pages -# MAN8_EXT - file extension for adminstrator man pages -# -# optional -# -# The man page for "foo.an" in the smail man/man5 source directory -# will be installed in MAN5/foo.MAN5_EXT, if MAN5 is defined. -# -# For some reason, BSD and System V differ on where file format man -# pages are kept, hence the unusual values of MAN5 for System V. - -MAN1=!!PREFIX!!/man/man1 -MAN1_EXT=1 - -MAN5=!!PREFIX!!/man/man5 -MAN5_EXT=5 - -MAN8=!!PREFIX!!/man/man8 -MAN8_EXT=8 - -# COMPRESS - file compression -# -# optional (default is system dependent or uses cat) -# -# The savelog utility can save space by compressing old log files. -# Normally when a file is compressed, the suffix is added to the -# filename. -# -# The COMPRESS symbol is the name of a program such that: -# -# $COMPRESS $COMP_FLAG filename ... -# -# the file: filename is replaced by: filename$DOT_Z -# regardless of the size of filename. The command: -# -# $UNCOMPRESS filename$DOT_Z -# -# will replace filename$DOT_Z with the original filename. -# The command: -# $ZCAT filename$DOT_Z -# -# will read the compressed file: filename$DOT_Z and write the -# plain text to standard output while leaving the file compressed. - -COMPRESS=gzip -COMP_FLAG="-f" -UNCOMPRESS=gunzip -ZCAT=gzcat -DOT_Z=".gz" - -#COMPRESS=pack # System V standard -#COMP_FLAG="-f" -#UNCOMPRESS=unpack -#ZCAT=pcat -#DOT_Z=".z" - -#COMPRESS=true # if no compress is used -#COMP_FLAG="" -#UNCOMPRESS=true -#ZCAT=cat -#DOT_Z="" - - -# MISC_C_DEFINES - miscellaneous #defines for C programs -# -# optional -# -# The value of MISC_C_DEFINES is included directly into the file defs.h -# in each source directory. It is useful as a central place for -# miscellaneous #defines not otherwise setable above. In particular, -# it is useful for overriding other more values given in the file -# src/config.h. It was felt that it was appropriate to keep the -# EDITME file fairly small, with only a reasonable subset of the -# configurable aspects of smail being explicitly described. As a -# result, there may be some other things in config.h that you may -# wish to change. Use #define's here to accomplish this. -# -# A suitable collection of #undef's and #define's here can also -# change the behavior defined in the file under conf/os or conf/arch -# for your operating system and architecture. However, use of -# MISC_C_DEFINES for this is discouraged. -# -# As with /bin/sh scripts, a logical line beginning with a : causes -# that line to be parsed but ignored. If it were simply commented out -# then the second line would be processed. - -# MISC_SH_DEFINES - miscellaneous script to include in defs.sh -# -# optional -# -# The value of MISC_SH_DEFINES is included directly into the file -# defs.sh, in each source directory. It is a useful place to store -# script lines to override values set by the mkdefs.sh shell script -# or in a conf/os or conf/arch file. -# -# As with /bin/sh scripts, a logical line beginning with a : causes -# that line to be parsed but ignored. If it were simply commented out -# then the second line would be processed. - - - -# MISC_SED_DEFINES - miscellaneous lines to include in defs.sed -# -# optional -# -# The value of MISC_SED_DEFINES is included directly into the file -# defs.sed, in each source directory. It is a useful place to store -# sed lines to override lines set by the mkdefs.sh shell script from -# information in a conf/os or conf/arch file. -# -# As with /bin/sh scripts, a logical line beginning with a : causes -# that line to be parsed but ignored. If it were simply commented out -# then the second line would be processed. - -# We can't readily think of good examples for this one. diff --git a/mail/smail/files/freebsd2.0 b/mail/smail/files/freebsd2.0 deleted file mode 100644 index 78c3a5094078..000000000000 --- a/mail/smail/files/freebsd2.0 +++ /dev/null @@ -1,73 +0,0 @@ -# @(#)conf/os/bsd4.4 1.9 8/8/92 18:42:25 -# -# bsd4.4 - define the characteristics of Berkeley UNIX Release 4.4 - -# OSNAMES - Names defining this operating system -OSNAMES=UNIX_BSD4_2:UNIX_BSD:UNIX:POSIX_OS - -# LOCKING_PROTOCOL - macros for efficient file locking -LOCKING_PROTOCOL="\ -#define lock_fd(fd) (flock((fd), LOCK_EX|LOCK_NB) < 0? FAIL: SUCCEED) -#define lock_fd_wait(fd) (flock((fd), LOCK_EX) < 0? FAIL: SUCCEED) -#define unlock_fd(fd) ((void) flock((fd), LOCK_UN)) -#define unlock_fd_wait(fd) ((void) flock((fd), LOCK_UN)) -#define lock_fd_rd_wait(fd) (flock((fd), LOCK_SH) < 0? FAIL: SUCCEED) -" - -# MAILBOX_DIR - in which directory are user mailbox files -MAILBOX_DIR=/var/mail - -# CONSOLE - name of the console device file -CONSOLE=/dev/console - -# DECLARE_STRINGS - declare string routines, using macros as needed -#DECLARE_STRINGS="\ -#include <strings.h> -#define memcpy(s1,s2,n) (bcopy((s2),(s1),(n))) -#define memcmp(s1,s2,n) (bcmp((s1),(s2),(n))) -#/* the following are defined in string.c */ -##ifdef BSD>=199306 -#extern char *strpbrk(); -#extern int strspn(); -##endif -#" - -# SECURE_PATH - directories containing system-supplied user programs -SECURE_PATH=/sbin:/usr/sbin:/bin:/usr/bin - -# OSLIBS - name any object libraries containing routines we will need -# OSLIBS=-ldbm - -# DRIVER_CONFIGURATION - configuration file describing smail drivers -DRIVER_CONFIGURATION=arpa-network - -# RANLIB - how do we organize an existing object archive library -RANLIB=ranlib - -# CHOWN - command to use for accessing the chown program -CHOWN=/usr/sbin/chown - -# COMPRESS, etc. - Select method of file compression (use compress) -COMPRESS=gzip -COMP_FLAG=-f -DOT_Z=.gz -UNCOMPRESS=gunzip -ZCAT=gzcat - -# MISC_DEFINES - miscellaneous definitions -# -# 4.3BSD has utime(), but does not have a header file containing the -# utimbuf structure, so declare it ourselves. -# MISC_DEFINES=DECLARE_UTIMBUF -MISC_DEFINES=INET_NTOA_USE_STRUCT - -# HAVE - what features should be used with this operating system -HAVE=BIND:BSD_NETWORKING:BSTRING:COMSAT:DUP2:FSYNC:FTRUNCATE:GETHOSTNAME -HAVE=$HAVE:GETOPT:HASH_BANG:HDB_UUCP:MKDIR:READDIR:RENAME:RLIMIT:SETEUID -HAVE=$HAVE:SETGROUPS:SYS5_STRLIB:SYSEXITS:UNAME:VFORK:VFPRINTF:MEMMOVE - -#HAVE=RENAME:MKDIR:BSD_NETWORKING:SYSEXITS:BSTRING:GETHOSTNAME:GETOPT:VFPRINTF -#HAVE=$HAVE:HASH_BANG:DUP2:READDIR:SETGROUPS:FSYNC:FTRUNCATE:COMSAT:SYS5STRLIB - -# UUCP_SYSTEM_FILE - path to UUCP file containing remote systems -UUCP_SYSTEM_FILE=/usr/lib/uucp/L.sys diff --git a/mail/smail/pkg-comment b/mail/smail/pkg-comment deleted file mode 100644 index ecfd1ed06b65..000000000000 --- a/mail/smail/pkg-comment +++ /dev/null @@ -1 +0,0 @@ -This is Smail 3.1.29, a program used for receiving and delivering mail. diff --git a/mail/smail/pkg-descr b/mail/smail/pkg-descr deleted file mode 100644 index 43f45adaf7fc..000000000000 --- a/mail/smail/pkg-descr +++ /dev/null @@ -1,6 +0,0 @@ -This is Smail 3.1.29, a program used for receiving and delivering mail. -Its job is to take mail from sources on the local or -on remote hosts and deliver to the appropriate destinations. -This may be either on remote hosts or on the local machine. -It is not intended to be a user interface for reading and -submitting mail. diff --git a/mail/smail/pkg-plist b/mail/smail/pkg-plist deleted file mode 100644 index 7ef4ef9b7c89..000000000000 --- a/mail/smail/pkg-plist +++ /dev/null @@ -1,60 +0,0 @@ -bin/mailq -bin/uuwho -bin/mkaliases -bin/smail -bin/pathto -bin/uupath -bin/runq -bin/rsmtp -bin/smtpd -bin/rmail -lib/smail/config.sample -lib/smail/directors.sample -lib/smail/routers.sample -lib/smail/transports.sample -lib/smail/util/mkpath.awk -lib/smail/util/getopt -lib/smail/util/pathalias -lib/smail/util/makedb -lib/smail/util/mkline -lib/smail/util/mksort -lib/smail/util/dcasehost -lib/smail/util/mkdbm -lib/smail/util/mkpath -lib/smail/util/pathmerge -lib/smail/util/checkerr -lib/smail/util/getmap -lib/smail/util/gleem -lib/smail/util/unsharmap -lib/smail/util/savelog -lib/smail/util/mkuuwho -lib/smail/util/mkhpath -lib/smail/util/mkaliases -lib/smail/util/newaliases -lib/smail/util/mkuuwho.awk -lib/smail/maps -lib/smail/methods -lib/smail/COPYING -man/man1/pathto.1.gz -man/man1/uuwho.1.gz -man/man1/uupath.1.gz -man/man5/smail.5.gz -man/man8/pathalias.8.gz -man/man8/mkdbm.8.gz -man/man8/mkline.8.gz -man/man8/mksort.8.gz -man/man8/mkaliases.8.gz -man/man8/smail.8.gz -man/man8/mkpath.8.gz -man/man8/pathmerge.8.gz -man/man8/checkerr.8.gz -man/man8/getmap.8.gz -man/man8/mkhpath.8.gz -man/man8/savelog.8.gz -man/man8/mkuuwho.8.gz -man/man8/mailq.8.gz -man/man8/sendmail.8.gz -man/man8/runq.8.gz -man/man8/rmail.8.gz -man/man8/rsmtp.8.gz -man/man8/smtpd.8.gz diff --git a/mail/smail/scripts/configure b/mail/smail/scripts/configure deleted file mode 100644 index 16067b7f41b7..000000000000 --- a/mail/smail/scripts/configure +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh -# -# $Id:$ - -sed <${FILESDIR}/EDITME >${WRKSRC}/conf/EDITME s+!!PREFIX!!+$PREFIX+g -sed <${FILESDIR}/freebsd2.0 >${WRKSRC}/conf/os/freebsd2.0 s+!!PREFIX!!+$PREFIX+g |