diff options
Diffstat (limited to 'misc/amanda25-client')
| -rw-r--r-- | misc/amanda25-client/Makefile | 29 | ||||
| -rw-r--r-- | misc/amanda25-client/distinfo | 2 | ||||
| -rw-r--r-- | misc/amanda25-client/pkg-descr | 69 | ||||
| -rw-r--r-- | misc/amanda25-client/pkg-plist | 92 |
4 files changed, 104 insertions, 88 deletions
diff --git a/misc/amanda25-client/Makefile b/misc/amanda25-client/Makefile index d91598b25a69..7b6d326947b8 100644 --- a/misc/amanda25-client/Makefile +++ b/misc/amanda25-client/Makefile @@ -3,24 +3,29 @@ # Date created: 28th Feb 1995 # Whom: gpalmer # -# $Id: Makefile,v 1.8 1996/11/19 01:18:00 asami Exp $ +# $Id: Makefile,v 1.9 1997/03/08 05:00:11 gpalmer Exp $ # -DISTNAME= amanda-2.3.0 +DISTNAME= amanda-2.4.0b6 CATEGORIES= misc -MASTER_SITES= ftp://ftp.cs.umd.edu/pub/amanda/ +MASTER_SITES= ftp://ftp.amanda.org/pub/amanda/ -MAINTAINER= gpalmer@FreeBSD.ORG +MAINTAINER= cwt@FreeBSD.ORG -PATCH_STRIP= -MAN8= amanda.8 amadmin.8 amcheck.8 amcleanup.8 amdump.8 \ - amflush.8 amlabel.8 amrestore.8 amtape.8 - -pre-configure: - echo "${CFLAGS}" > /tmp/build-ports-misc-amanda-cflags +GNU_CONFIGURE= yes +CONFIGURE_ARGS= --libexecdir=${PREFIX}/libexec/amanda \ + --with-user=operator --with-group=operator +PATCH_STRIP= +MAN8= amadmin.8 amanda.8 amcheck.8 amcheckdb.8 amcleanup.8 \ + amdump.8 amflush.8 amlabel.8 amoverview.8 amplot.8 \ + amrecover.8 amrestore.8 amrmtape.8 amtape.8 amtoc.8 \ + amverify.8 post-install: - mkdir -p ${PREFIX}/share/examples/amanda - cp -R ${WRKSRC}/example/* ${PREFIX}/share/examples/amanda + ${MKDIR} ${PREFIX}/lib/amanda/${DISTNAME}/examples + ${CP} -R ${WRKSRC}/example/amanda.conf \ + ${WRKSRC}/example/chg-multi.conf \ + ${WRKSRC}/example/disklist \ + ${PREFIX}/lib/amanda/${DISTNAME}/examples .include <bsd.port.mk> diff --git a/misc/amanda25-client/distinfo b/misc/amanda25-client/distinfo index 5f4ae2326bf3..ea2def488061 100644 --- a/misc/amanda25-client/distinfo +++ b/misc/amanda25-client/distinfo @@ -1 +1 @@ -MD5 (amanda-2.3.0.tar.gz) = fabe173c0b507633d8b7eb081acd8174 +MD5 (amanda-2.4.0b6.tar.gz) = ccc830dbe5fff4f7bfb10477f9066fe0 diff --git a/misc/amanda25-client/pkg-descr b/misc/amanda25-client/pkg-descr index d22b3394fd2e..5b33b9939e25 100644 --- a/misc/amanda25-client/pkg-descr +++ b/misc/amanda25-client/pkg-descr @@ -1,68 +1,23 @@ + +** CAUTION ** + +THIS BETA RELEASE OF AMANDA 2.4 BREAKS BACKWARDS COMPATIBILITY WITH +EARLIER AMANDA CLIENTS (PER CHANGES FILE IN THE DISTRIBUTION.) + WHAT IS AMANDA? --------------- -This is an alpha-test release of Amanda, the Advanced Maryland Automatic +This is a release of Amanda, the Advanced Maryland Automatic Network Disk Archiver. Amanda is a backup system designed to archive many -computers on a network to a single large-capacity tape drive. This release -is currently in daily use at the University of Maryland at College Park -Computer Science Department, backing up all the disks on all the -workstations in the department: currently over 70 gigabytes of data across -more than 400 filesystems on more than 146 workstations and servers, using -a single 5 Gigabyte Exabyte EXB-8500. Here are some features of Amanda: +computers on a network to a single large-capacity tape drive. + +Here are some features of Amanda: * written in C, freely distributable. - * built on top of standard backup software: BSD Unix dump/restore, and + * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as we can write files to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host - with a large holding disk can be filled by Amanda in under 4 hours. + with a large holding disk can be filled by Amanda in under 4 hours. * does simple tape management: will not overwrite the wrong tape. - * supports tape changers via a generic interface. Easily customizable to - any type of tape carousel, robot, or stacker that can be controlled via - the unix command line. - * supports Kerberos 4 security, including encrypted dumps. The Kerberos - support is available as a separate add-on package, see the file - KERBEROS.HOW-TO-GET on the ftp site, and the file docs/KERBEROS in this - package, for more details. - * for a restore, tells you what tapes you need, and finds the proper - backup image on the tape for you. - * recovers gracefully from errors, including down or hung machines. - * reports results, including all errors in detail, in email to operators. - * will dynamically adjust backup schedule to keep within constraints: no - more juggling by hand when adding disks and computers to network. - * includes a pre-run checker program, that conducts sanity checks on both - the tape server host and all the client hosts (in parallel), and will - send an e-mail report of any problems that could cause the backups to - fail. - * can compress dumps before sending over net, with either compress or gzip. - * can optionally syncronize with external backups, for those large - timesharing computers where you want to do fu-------------------------------------------- - -Amanda requires a host that is mostly idle at night, with a large capacity -tape drive (e.g. an EXABYTE or DAT tape). This becomes the "tape server -host". All the computers you are going to dump are the "backup client -hosts". The server host can also be a client host. - -Amanda works best with one or more large "holding disk" partition on the -server host available to it for buffering dumps before writing to tape. -The holding disk allows Amanda to run backups in parallel to the disk, only -writing them to tape when the backup is finished. Note that the holding -disk is not required: without it Amanda will run backups sequentially to -the tape drive. Running it this way kills the great performance, but still -allows you to take advantage of Amanda's other features. - -As a rule of thumb, for best performance the holding disk should be larger -than the dump output from your largest disk partitions. For example, if -you are backing up some full gigabyte disks that compress down to 500 MB, -then you'll want 500 MB on your holding disk. On the other hand, if those -gigabyte drives are partitioned into 500 MB filesystems, they'll probably -compress down to 250 MB and you'll only need that much on your holding -disk. Amanda will perform better with larger holding disks. We use 800 MB -for our holding disk. - -Actually, Amanda will still work if you have full dumps that are larger -than the holding disk: Amanda will send those dumps directly to tape one at -a time. If you have many such dumps you will be limited by the dump speed -of those machines. - diff --git a/misc/amanda25-client/pkg-plist b/misc/amanda25-client/pkg-plist index 8eb96afc1459..0ac5cfb339c9 100644 --- a/misc/amanda25-client/pkg-plist +++ b/misc/amanda25-client/pkg-plist @@ -1,31 +1,87 @@ +lib/amanda/amanda-2.4.0b6/examples/amanda.conf +lib/amanda/amanda-2.4.0b6/examples/chg-multi.conf +lib/amanda/amanda-2.4.0b6/examples/disklist +lib/libamanda.a +lib/libamanda.la +lib/libamanda.so +lib/libamanda.so.3.0 +lib/libamclient.a +lib/libamclient.la +lib/libamclient.so +lib/libamclient.so.0.2 +lib/libamnolog.a +lib/libamnolog.la +lib/libamnolog.so +lib/libamnolog.so.0.0 +lib/libamserver.a +lib/libamserver.la +lib/libamserver.so +lib/libamserver.so.2.0 +lib/libamtape.a +lib/libamtape.la +lib/libamtape.so +lib/libamtape.so.1.0 +@exec /sbin/ldconfig -m %B libexec/amanda/amandad -libexec/amanda/sendsize +libexec/amanda/amcat.awk +libexec/amanda/amidxtaped +libexec/amanda/amindexd +libexec/amanda/amplot.awk +libexec/amanda/amplot.g +libexec/amanda/amplot.gp +libexec/amanda/amtrmidx libexec/amanda/calcsize -libexec/amanda/sendbackup-dump -libexec/amanda/sendbackup-gnutar -libexec/amanda/runtar -libexec/amanda/selfcheck -libexec/amanda/taper -libexec/amanda/dumper +libexec/amanda/chg-chio +libexec/amanda/chg-chs +libexec/amanda/chg-manual +libexec/amanda/chg-mtx +libexec/amanda/chg-multi +libexec/amanda/chg-rth libexec/amanda/driver +libexec/amanda/dumper +libexec/amanda/getconf +libexec/amanda/patch-system libexec/amanda/planner libexec/amanda/reporter -libexec/amanda/getconf -sbin/amrestore -sbin/amadmin -sbin/amflush -sbin/amlabel -sbin/amcheck -sbin/amdump -sbin/amcleanup -sbin/amtape -libexec/amanda/chg-generic -man/man8/amanda.8.gz +libexec/amanda/rundump +libexec/amanda/runtar +libexec/amanda/selfcheck +libexec/amanda/sendbackup +libexec/amanda/sendsize +libexec/amanda/taper +libexec/amanda/versionsuffix man/man8/amadmin.8.gz +man/man8/amanda.8.gz man/man8/amcheck.8.gz +man/man8/amcheckdb.8.gz man/man8/amcleanup.8.gz man/man8/amdump.8.gz man/man8/amflush.8.gz man/man8/amlabel.8.gz +man/man8/amoverview.8.gz +man/man8/amplot.8.gz +man/man8/amrecover.8.gz man/man8/amrestore.8.gz +man/man8/amrmtape.8.gz man/man8/amtape.8.gz +man/man8/amtoc.8.gz +man/man8/amverify.8.gz +sbin/amadmin +sbin/amcheck +sbin/amcheckdb +sbin/amcleanup +sbin/amdump +sbin/amflush +sbin/amlabel +sbin/amoverview +sbin/amplot +sbin/amrecover +sbin/amrestore +sbin/amrmtape +sbin/amtape +sbin/amtoc +sbin/amverify +@dirrm lib/amanda/amanda-2.4.0b6/examples +@dirrm lib/amanda/amanda-2.4.0b6 +@dirrm lib/amanda +@dirrm libexec/amanda |