diff options
Diffstat (limited to 'net/samba41/files/samba_server.in')
| -rw-r--r-- | net/samba41/files/samba_server.in | 202 |
1 files changed, 0 insertions, 202 deletions
diff --git a/net/samba41/files/samba_server.in b/net/samba41/files/samba_server.in deleted file mode 100644 index ea9cbadccf3e..000000000000 --- a/net/samba41/files/samba_server.in +++ /dev/null @@ -1,202 +0,0 @@ -#!/bin/sh -# -# $FreeBSD$ -# - -# PROVIDE: samba_server -# REQUIRE: NETWORKING SERVERS DAEMON ldconfig resolv ntpd -# BEFORE: LOGIN -# KEYWORD: shutdown -# -# Add the following lines to /etc/rc.conf.local or /etc/rc.conf -# to enable this service: -# -#samba_server_enable="YES" -# -# You can disable/enable any of the Samba daemons by specifying: -#samba_enable="NO" -#nmbd_enable="NO" -#smbd_enable="NO" -# You need to enable winbindd separately, by adding: -#winbindd_enable="YES" -# Configuration file can be set with: -#samba_server_config="%%SAMBA4_CONFDIR%%/%%SAMBA4_CONFIG%%" -# - -. /etc/rc.subr - -name="samba_server" -rcvar=${name}_enable -# Defaults -samba_server_config_default="%%SAMBA4_CONFDIR%%/%%SAMBA4_CONFIG%%" -smbcontrol_command="%%PREFIX%%/bin/smbcontrol" -# Custom commands -extra_commands="reload status" - -start_precmd="samba_server_prestart" -restart_precmd="samba_server_checkconfig" -reload_precmd="samba_server_checkconfig" -start_cmd="samba_server_cmd" -stop_cmd="samba_server_cmd" -status_cmd="samba_server_cmd" -reload_cmd="samba_server_reload_cmd" -rcvar_cmd="samba_server_rcvar_cmd" - -samba_server_checkconfig() { - echo -n "Performing sanity check on Samba configuration: " - if ${testparm_command} >/dev/null 2>&1; then - echo "OK" - else - echo "FAILED" - return 1 - fi -} - -samba_server_prestart() { - # Make sure we have our RUNDIR, even if it's on a tmpfs - if [ -d "${samba_server_piddir}" -o ! -e "${samba_server_piddir}" ]; then - install -d -m 0755 "${samba_server_piddir}" - fi - # https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200186 - if [ -d "${samba_server_privatedir}" -o ! -e "${samba_server_privatedir}" ]; then - install -d -m 0700 "${samba_server_privatedir}" - fi -# # Remove smbd.pid before starting up samba(needed for s3fs) -# if [ -e "${samba_server_piddir}/smbd.pid" ] ; then -# rm -f "${samba_server_piddir}/smbd.pid" -# fi - samba_server_checkconfig -} - -samba_server_rcvar_cmd() { - local name rcvar - rcvar=${name}_enable - # Prevent recursive calling - unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd" - # Check master variable - run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args} - # Check dependent variables - for name in ${samba_daemons}; do - # XXX - rcvars=''; v='' - rcvar=${name}_enable - run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args} - done -} - -samba_server_reload_cmd() { - local name rcvar command pidfile force_run - # Prevent recursive calling - unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd" - # Ignore rcvar and run command - if [ -n "${_rc_prefix}" -a "${_rc_prefix}" = "one" ] || [ -n "${rc_force}" ] || [ -n "${rc_fast}" ]; then - force_run=yes - fi - # Apply to all daemons - for name in ${samba_daemons}; do - rcvar=${name}_enable - command="%%PREFIX%%/sbin/${name}" - pidfile="${samba_server_piddir}/${name}.pid" - # Daemon should be enabled and running - if ( [ -n "${rcvar}" ] && checkyesno "${rcvar}" ) || [ -n "$force_run" ]; then - if [ -n "$(check_pidfile "${pidfile}" "${command}")" ]; then - debug "reloading ${name} configuration" - echo "Reloading ${name}." - ${smbcontrol_command} "${name}" 'reload-config' ${command_args} >/dev/null 2>&1 - fi - fi - done -} - -samba_server_cmd() { - local name rcvar rcvars v command pidfile samba_daemons result force_run - # Prevent recursive calling - unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd" - # Stop processes in the reverse order - if [ "${rc_arg}" = "stop" ] ; then - samba_daemons=$(reverse_list ${samba_daemons}) - fi - # Ignore rcvar and run command - if [ -n "${_rc_prefix}" -a "${_rc_prefix}" = "one" ] || [ -n "${rc_force}" ] || [ -n "${rc_fast}" ]; then - force_run=yes - fi - # Assume success - result=0 - # Apply to all daemons - for name in ${samba_daemons}; do - # XXX - rcvars=''; v='' - rcvar=${name}_enable - command="%%PREFIX%%/sbin/${name}" - pidfile="${samba_server_piddir}/${name}.pid" - # Daemon should be enabled and running - if ( [ -n "${rcvar}" ] && checkyesno "${rcvar}" ) || [ -n "$force_run" ]; then - run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args} - # If any of the commands failed, take it as a global result - result=$((${result} || $?)) - fi - done - return ${result} -} - -samba_server_config_init() { - local name - # Load configuration - load_rc_config "${name}" - # Defaults - samba_server_enable=${samba_server_enable:=NO} - samba_server_config=${samba_server_config=${samba_server_config_default}} - samba_server_configfile_arg=${samba_server_config:+--configfile="${samba_server_config}"} #" - #testparm_command="%%PREFIX%%/bin/samba-tool testparm --suppress-prompt --verbose ${samba_server_configfile_arg}" - testparm_command="%%PREFIX%%/bin/testparm --suppress-prompt --verbose ${samba_server_config}" - # Determine what daemons are necessary to run Samba in the current role - samba_server_role=$(${testparm_command} --parameter-name='server role' 2>/dev/null) - case "${samba_server_role}" in - active\ directory\ domain\ controller) - samba_daemons="samba" - ;; - auto|*) - samba_daemons="nmbd smbd winbindd" - ;; - esac - # Load daemons configuration - for name in ${samba_daemons}; do - load_rc_config "${name}" - # If samba_server_enable is 'YES' - if [ -n "${rcvar}" ] && checkyesno "${rcvar}"; then - if [ "${name}" != "winbindd" ]; then - # Set variable to 'YES' only if it is unset - eval ${name}_enable=\${${name}_enable-YES} - else - # Winbindd - samba_server_idmap=$(${testparm_command} --parameter-name='idmap uid' 2>/dev/null) - if [ -n "${samba_server_idmap}" ]; then - winbindd_enable="YES" - fi - fi - fi - # If variable is empty, set it to 'NO' - eval ${name}_enable=\${${name}_enable:-NO} - done - # Fetch parameters from configuration file - samba_server_lockdir="$(${testparm_command} --parameter-name='lock directory' 2>/dev/null)" - samba_server_lockdir=${samba_server_lockdir:=%%SAMBA4_LOCKDIR%%} - samba_server_piddir="$(${testparm_command} --parameter-name='pid directory' 2>/dev/null)" - samba_server_piddir=${samba_server_piddir:=%%SAMBA4_RUNDIR%%} - samba_server_privatedir="$(${testparm_command} --parameter-name='private dir' 2>/dev/null)" - samba_server_privatedir=${samba_server_privatedir:=%%SAMBA4_PRIVATEDIR%%} -} - -# Load configuration variables -samba_server_config_init -# Common flags -command_args=${samba_server_configfile_arg} -samba_flags=${samba_flags="--daemon"} -nmbd_flags=${nmbd_flags="--daemon"} -smbd_flags=${smbd_flags="--daemon"} -winbindd_flags=${winbindd_flags="--daemon"} -# Requirements -required_files="${samba_server_config}" -required_dirs="${samba_server_lockdir}" - -run_rc_command "$1" |