diff options
Diffstat (limited to 'ports-mgmt/portmk/Mk/bsd.perl.mk')
| -rw-r--r-- | ports-mgmt/portmk/Mk/bsd.perl.mk | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/ports-mgmt/portmk/Mk/bsd.perl.mk b/ports-mgmt/portmk/Mk/bsd.perl.mk deleted file mode 100644 index 16871cccad07..000000000000 --- a/ports-mgmt/portmk/Mk/bsd.perl.mk +++ /dev/null @@ -1,270 +0,0 @@ -#-*- mode: makefile; tab-width: 4; -*- -# ex:ts=4 -# -# $FreeBSD$ -# -# bsd.perl.mk - Support for Perl-based ports. -# -# Created by: Gabor Kovesdan <gabor@FreeBSD.org> -# -# For FreeBSD committers: -# Please send all suggested changes to the maintainer instead of committing -# them to CVS yourself. -# -# PERL5 - Set to full path of perl5, either in the system or -# installed from a port. -# PERL - Set to full path of perl5, either in the system or -# installed from a port, but without the version number. -# Use this if you need to replace "#!" lines in scripts. -# PERL_VERSION - Full version of perl5 (see below for current value). -# PERL_VER - Short version of perl5 (see below for current value). -# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where -# M is major version, N is minor version, and P is -# the patch level. E.g., PERL_VERSION=5.6.1 would give -# a PERL_LEVEL of 500601. This can be used in comparisons -# to determine if the version of perl is high enough, -# whether a particular dependency is needed, etc. -# PERL_ARCH - Directory name of architecture dependent libraries -# (value: ${ARCH}-freebsd). -# PERL_PORT - Name of the perl port that is installed -# (value: perl5) -# SITE_PERL - Directory name where site specific perl packages go. -# This value is added to PLIST_SUB. -# USE_PERL5 - If your port needs a specific version of Perl, you -# can easily specify that with this knob. If -# you need a certain minimal version, but don't -# care if about the upperversion, just put the -# + sign behind the version. If you want to -# specify a latest version your port can be used -# with, suffix the version number with a - sign. -# Exact version can also be specified if you just -# set USE_PERL5 to the desired version. If you -# just set USE_PERL5 to "yes", Perl will be -# pulled in as a dependency but no version check -# is done. -# USE_PERL5_REASON -# - Along with USE_PERL5, you can set a specific reason, -# why a given version is required. -# -# Examples: -# USE_PERL5= yes # port requires any version of Perl5 to build. -# USE_PERL5= 5.6.0+ # port requires at least Perl 5.6.0 to build. -# USE_PERL5= 5.8.2 # port is only usable with Perl 5.8.2. -# USE_PERL5= 5.8.6- # port is only usbale with Perl 5.8.6 or prior. -# -# This line along with a properly set USE_PERL5 will give the user a reason, -# why the specific ports cannot be installed into the given environment. -# -# USE_PERL5_REASON= this module is already part of your Perl version -# -# PERL_CONFIGURE -# - Configure using Perl's MakeMaker. Implies USE_PERL5. -# The version requirement can be specified here, -# as well. -# USE_PERL5_BUILD -# - If set, this port uses perl5 in one or more of the -# extract, patch, build or install phases. -# The version requirement can be specified here, -# as well. -# USE_PERL5_RUN - If set, this port uses perl5 for running. The -# version requirement can be specified here, -# as well. -# PERL_MODBUILD - Use Module::Build to configure, build and install -# port. The version requirement can be specified -# here, as well. -# -# WANT_PERL5 - Set this is your port conditionally depends on Perl. -# This MUST appear before the inclusion of bsd.port.pre.mk. - -.if !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include) - -Perl_Pre_Include= bsd.perl.mk -PERL_Include_MAINTAINER= perl@FreeBSD.org - -# XXX to remain undefined until all ports that require Perl are fixed -# to set one of the conditionals that force the inclusion of bsd.perl.mk -.if defined(_PERL_REFACTORING_COMPLETE) - -PERL_VERSION?= 5.8.8 -PERL_VER?= 5.8.8 - -.if !defined(PERL_LEVEL) && defined(PERL_VERSION) -perl_major= ${PERL_VERSION:C|\..*||} -_perl_minor= ${PERL_VERSION:S|^${perl_major}||:S|^.||:C|\..*||} -_perl_patch= ${PERL_VERSION:S|^${perl_major}||:S|^.${_perl_minor}||:S|^.||:C|\..*||} -perl_minor= ${_perl_minor:S|^|000|:C|.*(...)|\1|} -perl_patch= ${_perl_patch:S|^|00|:C|.*(..)|\1|} -PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch} -.else -PERL_LEVEL= 0 -.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION) - -PERL_ARCH?= mach - -.if ${PERL_LEVEL} >= 500800 -PERL_PORT?= perl5.8 -.else # ${PERL_LEVEL} < 500800 -PERL_PORT?= perl5 -.endif - -SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER} -SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL} - -PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION} -PERL= ${LOCALBASE}/bin/perl - -.endif # defined(_PERL_REFACTORING_COMPLETE) - -# Decide where to look for the version string -.ifdef USE_PERL5 -USE_PERL5_STRING= ${USE_PERL5} -.elifdef USE_PERL5_BUILD -USE_PERL5_STRING= ${USE_PERL5_BUILD} -.elifdef USE_PERL5_RUN -USE_PERL5_STRING= ${USE_PERL5_RUN} -.elifdef PERL_MODBUILD -USE_PERL5_STRING= ${PERL_MODBUILD} -.elifdef PERL_CONFIGURE -USE_PERL5_STRING= ${PERL_CONFIGURE} -.else -USE_PERL5_STRING= yes # currently unreachable -.endif - -.if ${USE_PERL5_STRING:L} != "yes" -want_perl_sign= ${USE_PERL5_STRING:C|^[0-9.]+||} -want_perl_ver= ${USE_PERL5_STRING:S|${want_perl_sign}$||} -want_perl_major= ${want_perl_ver:C|\..*||} -_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||} -_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||} -want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|} -want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|} -USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch} - -# Mask unspecified components. E.g. this way "5" will match any "5.x.x". -.if empty(_want_perl_minor) -masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|} -.elif empty(_want_perl_patch) -masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|} -.else -masked_PERL_LEVEL= ${PERL_LEVEL} -.endif - -.if ${want_perl_sign} == "+" -.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL} -USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl5.8 and try again -IGNORE= ${USE_PERL5_REASON} -.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL} -.elif ${want_perl_sign} == "" -.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL} -USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly -IGNORE= ${USE_PERL5_REASON} -.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL} -.elif ${want_perl_sign} == "-" -.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL} -USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver} -IGNORE= ${USE_PERL5_REASON} -.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL} -.else # wrong suffix -IGNORE= improper use of USE_PERL5 -.endif -.endif #${USE_PERL5_STRING:L} != "yes" - -.endif # !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include) - -.if defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include) - -Perl_Post_Include= bsd.perl.mk - -.if defined(_PERL_REFACTORING_COMPLETE) - -PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ - PERL_VER=${PERL_VER} \ - PERL_ARCH=${PERL_ARCH} \ - SITE_PERL=${SITE_PERL_REL} - -.endif # defined(_PERL_REFACTORING_COMPLETE) - -.if !defined(PERL) || !defined(PERL5) || !defined(PERL_PORT) || !defined(PERL_VERSION) -IGNORE= missing define for WANT_PERL, USE_PERL5, or similar before bsd.port. pre.mk inclusion -.endif - -.if defined(PERL_MODBUILD) -PERL_CONFIGURE= yes -CONFIGURE_SCRIPT?= Build.PL -.if ${PORTNAME} != Module-Build -BUILD_DEPENDS+= ${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build -.endif -ALL_TARGET?= -PL_BUILD?= Build -CONFIGURE_ARGS+= \ - create_packlist=0 \ - install_path=lib="${PREFIX}/${SITE_PERL_REL}" \ - install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \ - install_path=script="${PREFIX}/bin" \ - install_path=bin="${PREFIX}/bin" \ - install_path=libdoc="${MAN3PREFIX}/man/man3" \ - install_path=bindoc="${MAN1PREFIX}/man/man1" -.elif defined(PERL_CONFIGURE) -CONFIGURE_ARGS+= INSTALLDIRS="site" -.endif # defined(PERL_MODBUILD) - -.if defined(PERL_CONFIGURE) -USE_PERL5= yes -# Disable AutoInstall from attempting to install from CPAN directly in -# the case of missing dependencies. This causes the build to loop on -# the build cluster asking for interactive input. -CONFIGURE_ENV+= "PERL_EXTUTILS_AUTOINSTALL=--skipdeps" -.if defined(BATCH) && !defined(IS_INTERACTIVE) -CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES" -.endif # defined(BATCH) && !defined(IS_INTERACTIVE) -.endif # defined(PERL_CONFIGURE) - -.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) -EXTRACT_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -.endif -.if defined(USE_PERL5) || defined(USE_PERL5_RUN) -RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT} -.endif - -.if defined(PERL_CONFIGURE) -CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \ - INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib" -CONFIGURE_SCRIPT?= Makefile.PL -MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION} -.undef HAS_CONFIGURE -.endif # defined(PERL_CONFIGURE) - -.if defined(PERL_CONFIGURE) -.if !target(do-configure) -# XXX MCL had to duplicate the first block; implies more refactoring needed -do-configure: - @if [ -f ${SCRIPTDIR}/configure ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/configure; \ - fi - @cd ${CONFIGURE_WRKSRC} && \ - ${SETENV} ${CONFIGURE_ENV} \ - ${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} -.if !defined(PERL_MODBUILD) - @cd ${CONFIGURE_WRKSRC} && \ - ${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile -.endif # !defined(PERL_MODBUILD) -.endif # !target(do-configure) -.endif # defined(PERL_CONFIGURE) - -.if defined(PERL_MODBUILD) -.if !target(do-build) -do-build: - @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET}) -.endif # !target(do-build) - -.if !defined(USE_GMAKE) -.if !target(do-install) -do-install: - @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET}) -.endif # !target(do-install) -.endif # !defined(USE_GMAKE) -.endif # defined(PERL_MODBUILD) -.endif # defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include) |