diff options
Diffstat (limited to 'sysutils/apcupsd/files/patch-doc-apcupds.man')
| -rw-r--r-- | sysutils/apcupsd/files/patch-doc-apcupds.man | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/sysutils/apcupsd/files/patch-doc-apcupds.man b/sysutils/apcupsd/files/patch-doc-apcupds.man deleted file mode 100644 index 9c28feafad08..000000000000 --- a/sysutils/apcupsd/files/patch-doc-apcupds.man +++ /dev/null @@ -1,196 +0,0 @@ -*** doc/apcupsd.man.orig Sun Nov 2 11:39:52 2003 ---- doc/apcupsd.man Sun Nov 2 11:45:58 2003 -*************** -*** 8,22 **** - .SH NAME - apcupsd \- daemon for most APC's UPS for Linux - .SH SYNOPSIS -! .B /sbin/apcupsd - .br -! .B /etc/apcupsd/apccontrol - .br -! .B /etc/apcupsd/apcupsd.conf - .br -! .B /sbin/apcaccess - .br -! .B /sbin/apcnetd - .br - .SH DESCRIPTION - .LP ---- 8,22 ---- - .SH NAME - apcupsd \- daemon for most APC's UPS for Linux - .SH SYNOPSIS -! .B %PREFIX%/sbin/apcupsd - .br -! .B %PREFIX%/etc/apcupsd/apccontrol - .br -! .B %PREFIX%/etc/apcupsd/apcupsd.conf - .br -! .B %PREFIX%/sbin/apcaccess - .br -! .B %PREFIX%/sbin/apcnetd - .br - .SH DESCRIPTION - .LP -*************** -*** 29,35 **** - above shutdown conditions is met, "apcupsd" will inform users about this - fact. - -! The shutdown is made by script calls to "/etc/apcupsd/apccontrol", which - is called by "apcupsd". Consequently, no changes to /etc/inittab are necessary. - There is no communication between "apcupsd" and init(1) process. - Apcupsd modifies the halt script so that at the end of the shutdown ---- 29,35 ---- - above shutdown conditions is met, "apcupsd" will inform users about this - fact. - -! The shutdown is made by script calls to "%PREFIX%/etc/apcupsd/apccontrol", which - is called by "apcupsd". Consequently, no changes to /etc/inittab are necessary. - There is no communication between "apcupsd" and init(1) process. - Apcupsd modifies the halt script so that at the end of the shutdown -*************** -*** 58,71 **** - .TP - .B \-c --configure - Attempts to configure the UPS EPROM to the values specified in the -! configuration file "/etc/apcupsd/apcupsd.conf". - .TP - .B \-d --debug <level> - Turns on debugging output for a NETSLAVE or a NETMASTER. - .TP - .B \-f --config-file <file> - Specifies the location of the configuration file. The default -! is: /etc/apcupsd/apcupsd.conf - .TP - .B \-k --killpower - Attempt to turn the UPS off. This option is normally only ---- 58,71 ---- - .TP - .B \-c --configure - Attempts to configure the UPS EPROM to the values specified in the -! configuration file "%PREFIX%/etc/apcupsd/apcupsd.conf". - .TP - .B \-d --debug <level> - Turns on debugging output for a NETSLAVE or a NETMASTER. - .TP - .B \-f --config-file <file> - Specifies the location of the configuration file. The default -! is: %PREFIX%/etc/apcupsd/apcupsd.conf - .TP - .B \-k --killpower - Attempt to turn the UPS off. This option is normally only -*************** -*** 74,80 **** - .TP - .B \-n --rename-ups - Attempts to change the UPS name stored in the UPS EPROM -! to that specified in your "/etc/apcupsd/apcupsd.conf" file. - .TP - .B \-u --update-battery-date - Attempts to update the battery date stored in the UPS EPROM. Normally ---- 74,80 ---- - .TP - .B \-n --rename-ups - Attempts to change the UPS name stored in the UPS EPROM -! to that specified in your "%PREFIX%/etc/apcupsd/apcupsd.conf" file. - .TP - .B \-u --update-battery-date - Attempts to update the battery date stored in the UPS EPROM. Normally -*************** -*** 88,99 **** - - .SH CONFIGURATION - It may be necessary to change the configuration information in the file -! "/etc/apcupsd/apcupsd.conf" to meet your needs and to correspond to your - configuration. This file is a plain ASCII file and you can use your - favorite editor to change it. - .LP - Configuration commands in -! .B /etc/apcupsd/apcupsd.conf - are: - - .LP ---- 88,99 ---- - - .SH CONFIGURATION - It may be necessary to change the configuration information in the file -! "%PREFIX%/etc/apcupsd/apcupsd.conf" to meet your needs and to correspond to your - configuration. This file is a plain ASCII file and you can use your - favorite editor to change it. - .LP - Configuration commands in -! .B %PREFIX%/etc/apcupsd/apcupsd.conf - are: - - .LP -*************** -*** 163,169 **** - If you want the apcupsd network information server to provide - the last 10 events via the network, you must specify a - file where apcupsd will save these events. The default is: -! /etc/apcupsd/apcupsd.events. Currently, apcupsd will save - at most the last 50 events. When more than 50 events are - recorded and a network request for the events arrives, - the network server will truncate the file to ---- 163,169 ---- - If you want the apcupsd network information server to provide - the last 10 events via the network, you must specify a - file where apcupsd will save these events. The default is: -! /var/log/apcupsd.events. Currently, apcupsd will save - at most the last 50 events. When more than 50 events are - recorded and a network request for the events arrives, - the network server will truncate the file to -*************** -*** 524,536 **** - are disabled or set to default values. Currently, there is not a known - way for early signals to be sent to BASIC Ports. MINUTES are set to 0. - .SH FILES -! .B /etc/apcupsd/apcupsd.conf - - configuration file. - .br -! .B /etc/apcupsd/apcupsd.status - - STATUS file - .br -! .B /etc/apcupsd/apcupsd.events - - where up to the last 50 events are stored - for the network information server. - .SH EVENTS ---- 524,536 ---- - are disabled or set to default values. Currently, there is not a known - way for early signals to be sent to BASIC Ports. MINUTES are set to 0. - .SH FILES -! .B %PREFIX%/etc/apcupsd/apcupsd.conf - - configuration file. - .br -! .B /var/log/apcupsd.status - - STATUS file - .br -! .B /var/log/apcupsd.events - - where up to the last 50 events are stored - for the network information server. - .SH EVENTS -*************** -*** 539,548 **** - ... - - These events are sent to the system log, optionally sent -! to the temporary events file (/etc/apcupsd/apcupsd.events), -! and they also generate a call to /etc/apcupsd/apccontrol - which in turn will call any scripts you have placed in the -! /etc/apcupsd directory. - - .SH DATA format - If the DATATIME configuration command is set nonzero, ---- 539,548 ---- - ... - - These events are sent to the system log, optionally sent -! to the temporary events file (/var/log/apcupsd.events), -! and they also generate a call to %PREFIX%/etc/apcupsd/apccontrol - which in turn will call any scripts you have placed in the -! %PREFIX%/etc/apcupsd directory. - - .SH DATA format - If the DATATIME configuration command is set nonzero, |