diff options
Diffstat (limited to 'sysutils/memdump')
| -rw-r--r-- | sysutils/memdump/Makefile | 4 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-convert_size.c | 59 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-convert_size.h | 46 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-error.c | 117 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-error.h | 48 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-makedefs | 13 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-memdump.c | 214 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-mymalloc.c | 91 | ||||
| -rw-r--r-- | sysutils/memdump/files/patch-mymalloc.h | 48 | ||||
| -rw-r--r-- | sysutils/memdump/pkg-descr | 2 |
10 files changed, 637 insertions, 5 deletions
diff --git a/sysutils/memdump/Makefile b/sysutils/memdump/Makefile index c61eee6a15c3..8801c8b3e403 100644 --- a/sysutils/memdump/Makefile +++ b/sysutils/memdump/Makefile @@ -15,10 +15,6 @@ COMMENT= Forensic utility for memory-dumping .include <bsd.port.pre.mk> -.if ( ${OSVERSION} >= 500000 ) -IGNORE= Only supports FreeBSD up to 4.x (yet?) -.endif - ALL_TARGET= what PLIST_FILES= bin/memdump diff --git a/sysutils/memdump/files/patch-convert_size.c b/sysutils/memdump/files/patch-convert_size.c new file mode 100644 index 000000000000..d44c1681c96f --- /dev/null +++ b/sysutils/memdump/files/patch-convert_size.c @@ -0,0 +1,59 @@ +--- convert_size.c.orig Sun Feb 20 15:53:46 2005 ++++ convert_size.c Sun Feb 20 15:54:02 2005 +@@ -1,30 +1,30 @@ + /*++ +-/* NAME +-/* convert_size 3 +-/* SUMMARY +-/* string to size conversion +-/* SYNOPSIS +-/* #include <convert_size.h> +-/* +-/* size_t convert_size(str) +-/* const char *str; +-/* DESCRIPTION +-/* convert_size() converts its argument to internal form. if the +-/* argument ends in 'k', 'm' or 'g' the result is multiplied by +-/* 1024 (1K), 1048576 (1M), 1073741824 (1G), respectively. +-/* The suffix is case insensitive. +-/* SEE ALSO +-/* error(3) error reporting module. +-/* DIAGNOSTICS +-/* The result is negative in case of error. +-/* LICENSE +-/* This software is distributed under the IBM Public License. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * NAME ++ * convert_size 3 ++ * SUMMARY ++ * string to size conversion ++ * SYNOPSIS ++ * #include <convert_size.h> ++ * ++ * size_t convert_size(str) ++ * const char *str; ++ * DESCRIPTION ++ * convert_size() converts its argument to internal form. if the ++ * argument ends in 'k', 'm' or 'g' the result is multiplied by ++ * 1024 (1K), 1048576 (1M), 1073741824 (1G), respectively. ++ * The suffix is case insensitive. ++ * SEE ALSO ++ * error(3) error reporting module. ++ * DIAGNOSTICS ++ * The result is negative in case of error. ++ * LICENSE ++ * This software is distributed under the IBM Public License. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ + + /* System library. */ + diff --git a/sysutils/memdump/files/patch-convert_size.h b/sysutils/memdump/files/patch-convert_size.h new file mode 100644 index 000000000000..4b24c050896e --- /dev/null +++ b/sysutils/memdump/files/patch-convert_size.h @@ -0,0 +1,46 @@ +--- convert_size.h.orig Sun Feb 20 15:54:28 2005 ++++ convert_size.h Sun Feb 20 15:54:46 2005 +@@ -1,25 +1,25 @@ + /*++ +-/* NAME +-/* convert_size 3h +-/* SUMMARY +-/* string to size conversion +-/* SYNOPSIS +-/* #include <convert_size.h> +-/* DESCRIPTION +-/* .nf ++ * NAME ++ * convert_size 3h ++ * SUMMARY ++ * string to size conversion ++ * SYNOPSIS ++ * #include <convert_size.h> ++ * DESCRIPTION ++ * .nf + +- /* ++ * + * External interface. + */ + extern size_t convert_size(const char *); + + /* LICENSE +-/* .ad +-/* .fi +-/* The IBM Public License must be distributed with this software. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * .ad ++ * .fi ++ * The IBM Public License must be distributed with this software. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ diff --git a/sysutils/memdump/files/patch-error.c b/sysutils/memdump/files/patch-error.c new file mode 100644 index 000000000000..d004a82d4c3e --- /dev/null +++ b/sysutils/memdump/files/patch-error.c @@ -0,0 +1,117 @@ +--- error.c.orig Sun Feb 20 15:52:40 2005 ++++ error.c Sun Feb 20 15:53:14 2005 +@@ -1,59 +1,59 @@ + /*++ +-/* NAME +-/* error 3 +-/* SUMMARY +-/* diagnostics handlers +-/* SYNOPSIS +-/* #include <error.h> +-/* +-/* void error(format, ...) +-/* char *format; +-/* +-/* void remark(format, ...) +-/* char *format; +-/* +-/* void panic(format, ...) +-/* char *format; +-/* +-/* char *progname; +-/* int verbose; +-/* DESCRIPTION +-/* This module reports diagnostics. Each routine produces a one-line +-/* record with the program name and a caller-provided informative +-/* message. In the format string, %m is replaced by the text that +-/* corresponds to the present \fBerrno\fR value. +-/* +-/* error() writes a message to the standard error stream and +-/* terminates the process with a non-zero exit status. +-/* +-/* remark() writes a message to the standard error stream. +-/* +-/* panic() writes a message to the standard error stream and +-/* forces a core dump. +-/* +-/* progname is a global variable that the application should +-/* assign the program name. The initial value is a pointer to +-/* the string \fB"unknown"\fR. +-/* +-/* verbose is a global variable (initially, zero), that exists +-/* solely for the convenience of the application. Typical usage +-/* is like: +-/* +-/* .ti +5 +-/* if (verbose) remark(...); +-/* SEE ALSO +-/* errno(2) error numbers +-/* HISTORY +-/* error() and remark() appear in "Software Tools" by B.W. Kernighan +-/* and P.J. Plaugher. +-/* LICENSE +-/* This software is distributed under the IBM Public License. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * NAME ++ * error 3 ++ * SUMMARY ++ * diagnostics handlers ++ * SYNOPSIS ++ * #include <error.h> ++ * ++ * void error(format, ...) ++ * char *format; ++ * ++ * void remark(format, ...) ++ * char *format; ++ * ++ * void panic(format, ...) ++ * char *format; ++ * ++ * char *progname; ++ * int verbose; ++ * DESCRIPTION ++ * This module reports diagnostics. Each routine produces a one-line ++ * record with the program name and a caller-provided informative ++ * message. In the format string, %m is replaced by the text that ++ * corresponds to the present \fBerrno\fR value. ++ * ++ * error() writes a message to the standard error stream and ++ * terminates the process with a non-zero exit status. ++ * ++ * remark() writes a message to the standard error stream. ++ * ++ * panic() writes a message to the standard error stream and ++ * forces a core dump. ++ * ++ * progname is a global variable that the application should ++ * assign the program name. The initial value is a pointer to ++ * the string \fB"unknown"\fR. ++ * ++ * verbose is a global variable (initially, zero), that exists ++ * solely for the convenience of the application. Typical usage ++ * is like: ++ * ++ * .ti +5 ++ * if (verbose) remark(...); ++ * SEE ALSO ++ * errno(2) error numbers ++ * HISTORY ++ * error() and remark() appear in "Software Tools" by B.W. Kernighan ++ * and P.J. Plaugher. ++ * LICENSE ++ * This software is distributed under the IBM Public License. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ + + /* System library. */ + diff --git a/sysutils/memdump/files/patch-error.h b/sysutils/memdump/files/patch-error.h new file mode 100644 index 000000000000..d6d6670f3c3d --- /dev/null +++ b/sysutils/memdump/files/patch-error.h @@ -0,0 +1,48 @@ +--- error.h.orig Sun Feb 20 15:50:37 2005 ++++ error.h Sun Feb 20 15:50:53 2005 +@@ -1,14 +1,14 @@ + /*++ +-/* NAME +-/* error 3h +-/* SUMMARY +-/* diagnostics handlers +-/* SYNOPSIS +-/* #include <error.h> +-/* DESCRIPTION +-/* .nf ++ * NAME ++ * error 3h ++ * SUMMARY ++ * diagnostics handlers ++ * SYNOPSIS ++ * #include <error.h> ++ * DESCRIPTION ++ * .nf + +- /* ++ * + * External interface. + */ + #ifndef PRINTFLIKE +@@ -31,12 +31,12 @@ + #endif + + /* LICENSE +-/* .ad +-/* .fi +-/* The IBM Public License must be distributed with this software. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * .ad ++ * .fi ++ * The IBM Public License must be distributed with this software. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ diff --git a/sysutils/memdump/files/patch-makedefs b/sysutils/memdump/files/patch-makedefs new file mode 100644 index 000000000000..049090df88f7 --- /dev/null +++ b/sysutils/memdump/files/patch-makedefs @@ -0,0 +1,13 @@ +--- makedefs.orig Sun Feb 20 15:41:41 2005 ++++ makedefs Sun Feb 20 15:42:41 2005 +@@ -8,6 +8,10 @@ + ;; + FreeBSD.4*) DEFS="-DFREEBSD4" + ;; ++ FreeBSD.5*) DEFS="-DFREEBSD5" ++ ;; ++ FreeBSD.6*) DEFS="-DFREEBSD6" ++ ;; + OpenBSD.2*) DEFS="-DOPENBSD2" + ;; + OpenBSD.3*) DEFS="-DOPENBSD3" diff --git a/sysutils/memdump/files/patch-memdump.c b/sysutils/memdump/files/patch-memdump.c new file mode 100644 index 000000000000..018aa732934d --- /dev/null +++ b/sysutils/memdump/files/patch-memdump.c @@ -0,0 +1,214 @@ +--- memdump.c.orig Thu Jan 1 19:30:09 2004 ++++ memdump.c Sun Feb 20 15:58:34 2005 +@@ -1,92 +1,92 @@ + /*++ +-/* NAME +-/* memdump 1 +-/* SUMMARY +-/* memory dumper +-/* SYNOPSIS +-/* .ad +-/* .fi +-/* \fBmemdump\fR [\fB-kv\fR] [\fB-b \fIbuffer_size\fR] +-/* [\fB-d \fIdump_size\fR] [\fB-m \fImap_file\fR] [\fB-p \fIpage_size\fR] +-/* DESCRIPTION +-/* This program dumps system memory to the standard output stream, +-/* skipping over holes in memory maps. +-/* By default, the program dumps the contents of physical memory +-/* (\fB/dev/mem\fR). +-/* +-/* Output is in the form of a raw dump; if necessary, use the \fB-m\fR +-/* option to capture memory layout information. +-/* +-/* Output should be sent off-host over the network, to avoid changing +-/* all the memory in the file system cache. Use netcat, stunnel, or +-/* openssl, depending on your requirements. +-/* +-/* The size arguments below understand the \fBk\fR (kilo) \fBm\fR (mega) +-/* and \fBg\fR (giga) suffixes. Suffixes are case insensitive. +-/* +-/* Options +-/* .IP \fB-k\fR +-/* Attempt to dump kernel memory (\fB/dev/kmem\fR) rather than physical +-/* memory. +-/* .sp +-/* Warning: this can lock up the system to the point that you have +-/* to use the power switch (for example, Solaris 8 on 64-bit SPARC). +-/* .sp +-/* Warning: this produces bogus results on Linux 2.2 kernels. +-/* .sp +-/* Warning: this is very slow on 64-bit machines because the entire +-/* memory address range has to be searched. +-/* .sp +-/* Warning: kernel virtual memory mappings change frequently. Depending +-/* on the operating system, mappings smaller than \fIpage_size\fR or +-/* \fIbuffer_size\fR may be missed or may be reported incorrectly. +-/* .IP "\fB-b \fIbuffer_size\fR (default: 0)" +-/* Number of bytes per memory read operation. By default, the program +-/* uses the \fIpage_size\fR value. +-/* .sp +-/* Warning: a too large read buffer size causes memory to be missed on +-/* FreeBSD or Solaris. +-/* .IP "\fB-d \fIdump-size\fR (default: 0)" +-/* Number of memory bytes to dump. By default, the program runs +-/* until the memory device reports an end-of-file (Linux), or until +-/* it has dumped from \fB/dev/mem\fR as much memory as reported present +-/* by the kernel (FreeBSD, Solaris), or until pointer wrap-around happens. +-/* .sp +-/* Warning: a too large value causes the program to spend a lot of time +-/* skipping over non-existent memory on Solaris systems. +-/* .sp +-/* Warning: a too large value causes the program to copy non-existent +-/* data on FreeBSD systems. +-/* .IP "\fB-m\fR \fImap_file\fR" +-/* Write the memory map to \fImap_file\fR, one entry per line. +-/* Specify \fB-m-\fR to write to the standard error stream. +-/* Each map entry consists of a region start address and the first +-/* address beyond that region. Addresses are separated by space, +-/* and are printed as hexadecimal numbers (0xhhhh). +-/* .IP "\fB-p \fIpage_size\fR (default: 0)" +-/* Use \fIpage_size\fR as the memory page size. By default the program +-/* uses the system page size. +-/* .sp +-/* Warning: a too large page size causes memory to be missed +-/* while skipping over holes in memory. +-/* .IP \fB-v\fR +-/* Enable verbose logging for debugging purposes. Multiple \fB-v\fR +-/* options make the program more verbose. +-/* BUGS +-/* On many hardware platforms the firmware (boot PROM, BIOS, etc.) +-/* takes away some memory. This memory is not accessible through +-/* \fB/dev/mem\fR. +-/* +-/* This program should produce output in a format that supports +-/* structure information such as ELF. +-/* LICENSE +-/* This software is distributed under the IBM Public License. +-/* AUTHOR +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* USA +-/*--*/ ++ * NAME ++ * memdump 1 ++ * SUMMARY ++ * memory dumper ++ * SYNOPSIS ++ * .ad ++ * .fi ++ * \fBmemdump\fR [\fB-kv\fR] [\fB-b \fIbuffer_size\fR] ++ * [\fB-d \fIdump_size\fR] [\fB-m \fImap_file\fR] [\fB-p \fIpage_size\fR] ++ * DESCRIPTION ++ * This program dumps system memory to the standard output stream, ++ * skipping over holes in memory maps. ++ * By default, the program dumps the contents of physical memory ++ * (\fB/dev/mem\fR). ++ * ++ * Output is in the form of a raw dump; if necessary, use the \fB-m\fR ++ * option to capture memory layout information. ++ * ++ * Output should be sent off-host over the network, to avoid changing ++ * all the memory in the file system cache. Use netcat, stunnel, or ++ * openssl, depending on your requirements. ++ * ++ * The size arguments below understand the \fBk\fR (kilo) \fBm\fR (mega) ++ * and \fBg\fR (giga) suffixes. Suffixes are case insensitive. ++ * ++ * Options ++ * .IP \fB-k\fR ++ * Attempt to dump kernel memory (\fB/dev/kmem\fR) rather than physical ++ * memory. ++ * .sp ++ * Warning: this can lock up the system to the point that you have ++ * to use the power switch (for example, Solaris 8 on 64-bit SPARC). ++ * .sp ++ * Warning: this produces bogus results on Linux 2.2 kernels. ++ * .sp ++ * Warning: this is very slow on 64-bit machines because the entire ++ * memory address range has to be searched. ++ * .sp ++ * Warning: kernel virtual memory mappings change frequently. Depending ++ * on the operating system, mappings smaller than \fIpage_size\fR or ++ * \fIbuffer_size\fR may be missed or may be reported incorrectly. ++ * .IP "\fB-b \fIbuffer_size\fR (default: 0)" ++ * Number of bytes per memory read operation. By default, the program ++ * uses the \fIpage_size\fR value. ++ * .sp ++ * Warning: a too large read buffer size causes memory to be missed on ++ * FreeBSD or Solaris. ++ * .IP "\fB-d \fIdump-size\fR (default: 0)" ++ * Number of memory bytes to dump. By default, the program runs ++ * until the memory device reports an end-of-file (Linux), or until ++ * it has dumped from \fB/dev/mem\fR as much memory as reported present ++ * by the kernel (FreeBSD, Solaris), or until pointer wrap-around happens. ++ * .sp ++ * Warning: a too large value causes the program to spend a lot of time ++ * skipping over non-existent memory on Solaris systems. ++ * .sp ++ * Warning: a too large value causes the program to copy non-existent ++ * data on FreeBSD systems. ++ * .IP "\fB-m\fR \fImap_file\fR" ++ * Write the memory map to \fImap_file\fR, one entry per line. ++ * Specify \fB-m-\fR to write to the standard error stream. ++ * Each map entry consists of a region start address and the first ++ * address beyond that region. Addresses are separated by space, ++ * and are printed as hexadecimal numbers (0xhhhh). ++ * .IP "\fB-p \fIpage_size\fR (default: 0)" ++ * Use \fIpage_size\fR as the memory page size. By default the program ++ * uses the system page size. ++ * .sp ++ * Warning: a too large page size causes memory to be missed ++ * while skipping over holes in memory. ++ * .IP \fB-v\fR ++ * Enable verbose logging for debugging purposes. Multiple \fB-v\fR ++ * options make the program more verbose. ++ * BUGS ++ * On many hardware platforms the firmware (boot PROM, BIOS, etc.) ++ * takes away some memory. This memory is not accessible through ++ * \fB/dev/mem\fR. ++ * ++ * This program should produce output in a format that supports ++ * structure information such as ELF. ++ * LICENSE ++ * This software is distributed under the IBM Public License. ++ * AUTHOR ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * USA ++ *--*/ + + /* System libraries. */ + +@@ -108,7 +108,7 @@ + #endif + + #if defined(FREEBSD2) || defined(FREEBSD3) || defined(FREEBSD4) \ +- || defined(FREEBSD5) \ ++ || defined(FREEBSD5) || defined(FREEBSD6) \ + || defined(OPENBSD2) || defined(OPENBSD3) \ + || defined(BSDI2) || defined(BSDI3) || defined(BSDI4) + #include <sys/param.h> +@@ -184,7 +184,7 @@ + #endif + + #if defined(FREEBSD2) || defined(FREEBSD3) || defined(FREEBSD4) \ +- || defined(FREEBSD5) \ ++ || defined(FREEBSD5) || defined(FREEBSD6) \ + || defined(OPENBSD2) || defined(OPENBSD3) + int name[] = {CTL_HW, HW_PHYSMEM}; + size_t len; +@@ -220,9 +220,9 @@ + static void dump_memory(int fd, FILE * map, char *buffer, size_t buffer_size, + size_t dump_size, size_t page_size, int flags) + { +- OFFT_TYPE start; +- OFFT_TYPE where; +- OFFT_TYPE count; ++ OFFT_TYPE start = 0; ++ OFFT_TYPE where = 0; ++ OFFT_TYPE count = 0; + size_t todo; + ssize_t read_count; + int in_region = 0; diff --git a/sysutils/memdump/files/patch-mymalloc.c b/sysutils/memdump/files/patch-mymalloc.c new file mode 100644 index 000000000000..a800df6581bc --- /dev/null +++ b/sysutils/memdump/files/patch-mymalloc.c @@ -0,0 +1,91 @@ +--- mymalloc.c.orig Sun Feb 20 15:51:11 2005 ++++ mymalloc.c Sun Feb 20 15:52:01 2005 +@@ -1,46 +1,46 @@ + /*++ +-/* NAME +-/* mymalloc 3 +-/* SUMMARY +-/* memory management wrappers +-/* SYNOPSIS +-/* #include <mymalloc.h> +-/* +-/* char *mymalloc(len) +-/* int len; +-/* +-/* char *myrealloc(ptr, len) +-/* char *ptr; +-/* int len; +-/* +-/* char *mystrdup(str) +-/* const char *str; +-/* DESCRIPTION +-/* This module performs low-level memory management with error +-/* handling. A call of these functions either succeeds or it does +-/* not return at all. +-/* +-/* mymalloc() allocates the requested amount of memory. The memory +-/* is not set to zero. +-/* +-/* myrealloc() resizes memory obtained from mymalloc() or myrealloc() +-/* to the requested size. The result pointer value may differ from +-/* that given via the \fBptr\fR argument. +-/* +-/* mystrdup() returns a dynamic-memory copy of its null-terminated +-/* argument. This routine uses mymalloc(). +-/* SEE ALSO +-/* error(3) error reporting module. +-/* DIAGNOSTICS +-/* Fatal errors: the requested amount of memory is not available. +-/* LICENSE +-/* This software is distributed under the IBM Public License. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * NAME ++ * mymalloc 3 ++ * SUMMARY ++ * memory management wrappers ++ * SYNOPSIS ++ * #include <mymalloc.h> ++ * ++ * char *mymalloc(len) ++ * int len; ++ * ++ * char *myrealloc(ptr, len) ++ * char *ptr; ++ * int len; ++ * ++ * char *mystrdup(str) ++ * const char *str; ++ * DESCRIPTION ++ * This module performs low-level memory management with error ++ * handling. A call of these functions either succeeds or it does ++ * not return at all. ++ * ++ * mymalloc() allocates the requested amount of memory. The memory ++ * is not set to zero. ++ * ++ * myrealloc() resizes memory obtained from mymalloc() or myrealloc() ++ * to the requested size. The result pointer value may differ from ++ * that given via the \fBptr\fR argument. ++ * ++ * mystrdup() returns a dynamic-memory copy of its null-terminated ++ * argument. This routine uses mymalloc(). ++ * SEE ALSO ++ * error(3) error reporting module. ++ * DIAGNOSTICS ++ * Fatal errors: the requested amount of memory is not available. ++ * LICENSE ++ * This software is distributed under the IBM Public License. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ + + /* System library. */ + diff --git a/sysutils/memdump/files/patch-mymalloc.h b/sysutils/memdump/files/patch-mymalloc.h new file mode 100644 index 000000000000..4a0b537ebb8b --- /dev/null +++ b/sysutils/memdump/files/patch-mymalloc.h @@ -0,0 +1,48 @@ +--- mymalloc.h.orig Sun Feb 20 15:48:02 2005 ++++ mymalloc.h Sun Feb 20 15:49:36 2005 +@@ -1,14 +1,14 @@ + /*++ +-/* NAME +-/* mymalloc 3h +-/* SUMMARY +-/* memory management wrappers +-/* SYNOPSIS +-/* #include "mymalloc.h" +-/* DESCRIPTION +-/* .nf ++ * NAME ++ * mymalloc 3h ++ * SUMMARY ++ * memory management wrappers ++ * SYNOPSIS ++ * #include "mymalloc.h" ++ * DESCRIPTION ++ * .nf + +- /* ++ * + * External interface. + */ + extern char *mymalloc(int); +@@ -16,12 +16,12 @@ + extern char *mystrdup(const char *); + + /* LICENSE +-/* .ad +-/* .fi +-/* The IBM Public License must be distributed with this software. +-/* AUTHOR(S) +-/* Wietse Venema +-/* IBM T.J. Watson Research +-/* P.O. Box 704 +-/* Yorktown Heights, NY 10598, USA +-/*--*/ ++ * .ad ++ * .fi ++ * The IBM Public License must be distributed with this software. ++ * AUTHOR(S) ++ * Wietse Venema ++ * IBM T.J. Watson Research ++ * P.O. Box 704 ++ * Yorktown Heights, NY 10598, USA ++ *--*/ diff --git a/sysutils/memdump/pkg-descr b/sysutils/memdump/pkg-descr index 5b8bf7b4d96a..b88a609b9577 100644 --- a/sysutils/memdump/pkg-descr +++ b/sysutils/memdump/pkg-descr @@ -2,4 +2,4 @@ This program dumps system memory to the standard output stream, skipping over holes in memory maps. By default, the program dumps the contents of physical memory. -WWW: http://www.porcupine.org/forensics/ +WWW: http://www.porcupine.org/forensics/tct.html |