diff options
Diffstat (limited to 'sysutils')
226 files changed, 1461 insertions, 636 deletions
diff --git a/sysutils/3dm/files/pkg-message.in b/sysutils/3dm/files/pkg-message.in index 9dbf4c3f18f0..e3b3f5c34f3e 100644 --- a/sysutils/3dm/files/pkg-message.in +++ b/sysutils/3dm/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM 3DM2 includes an rc.d script to control a daemon mode. You can start the daemon with these commands: @@ -6,3 +9,6 @@ You can start the daemon with these commands: Do not forget to edit '%%PREFIX%%/etc/3dm2/3dm2.conf' Visit https://localhost:888/ +EOM +} +] diff --git a/sysutils/DTraceToolkit/pkg-message b/sysutils/DTraceToolkit/pkg-message index 321b9d46fafd..76c13f83a97a 100644 --- a/sysutils/DTraceToolkit/pkg-message +++ b/sysutils/DTraceToolkit/pkg-message @@ -1,6 +1,10 @@ -************************************************************** -* At this point it is prudent to remind you that DTrace * -* support in FreeBSD is incomplete and experimental. Many of * -* these scripts will not work as they are either too Solaris * -* specific or use probes which are unsupported at this time. * -************************************************************** +[ +{ type: install + message: <<EOM + At this point it is prudent to remind you that DTrace + support in FreeBSD is incomplete and experimental. Many of + these scripts will not work as they are either too Solaris + specific or use probes which are unsupported at this time. +EOM +} +] diff --git a/sysutils/LPRng/files/pkg-message.in b/sysutils/LPRng/files/pkg-message.in index fa5bade03d3f..60af551b0970 100644 --- a/sysutils/LPRng/files/pkg-message.in +++ b/sysutils/LPRng/files/pkg-message.in @@ -1,5 +1,6 @@ -********************************************************************** - +[ +{ type: install + message: <<EOM To enable LPRng, put the following lines in /etc/rc.conf lpd_enable="NO" @@ -19,4 +20,6 @@ papowell@astart.com 6741 Convoy Court Network and System San Diego, CA 92111 Consulting 858-874-6543 FAX 858-751-2435 LPRng - Print Spooler (http://www.lprng.com) -********************************************************************** +EOM +} +] diff --git a/sysutils/acerhdf-kmod/pkg-message b/sysutils/acerhdf-kmod/pkg-message index 630ed3713d94..ae57ecd980ac 100644 --- a/sysutils/acerhdf-kmod/pkg-message +++ b/sysutils/acerhdf-kmod/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM The acerhdf fan control is disabled by default. To enable it add the following settings to /boot/loader.conf @@ -9,3 +12,6 @@ and to /etc/sysctl.conf Refer to acerhdf(4) for additonal settings. Choose wisely and be careful that your system does not overheat! +EOM +} +] diff --git a/sysutils/afbinit/pkg-message b/sysutils/afbinit/pkg-message index e9aa02e76061..63798e11fe51 100644 --- a/sysutils/afbinit/pkg-message +++ b/sysutils/afbinit/pkg-message @@ -1,8 +1,10 @@ -=========================================================================== - +[ +{ type: install + message: <<EOM In order to automatically load the microcode during boot add the following line to to /etc/rc.conf or /etc/rc.conf.local: afbinit_enable="YES" - -=========================================================================== +EOM +} +] diff --git a/sysutils/afio/files/pkg-message.in b/sysutils/afio/files/pkg-message.in index 4058c152c6fc..4103958e56ea 100644 --- a/sysutils/afio/files/pkg-message.in +++ b/sysutils/afio/files/pkg-message.in @@ -1,5 +1,6 @@ -* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * - +[ +{ type: install + message: <<EOM THERE ARE POTENTIAL ISSUES YOU SHOULD BE AWARE OF PRIOR TO THE USE OF AFIO @@ -8,5 +9,6 @@ %%PREFIX%%/share/doc/afio/README for details. - -* WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * +EOM +} +] diff --git a/sysutils/anacron/files/pkg-message.in b/sysutils/anacron/files/pkg-message.in index 6f7659674cae..77c5d61d0db1 100644 --- a/sysutils/anacron/files/pkg-message.in +++ b/sysutils/anacron/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM Configuration hints: - Edit %%PREFIX%%/etc/anacrontab - Deactivate the 'periodic' commands in /etc/crontab @@ -6,3 +8,6 @@ Configuration hints: 0 0 * * * root %%PREFIX%%/sbin/anacron - Add anacron_enable="YES" to /etc/rc.conf - Read anacron(8) and anacrontab(5) +EOM +} +] diff --git a/sysutils/anvil/files/pkg-message.in b/sysutils/anvil/files/pkg-message.in index a4086721a2fc..42f6d5cc3ad2 100644 --- a/sysutils/anvil/files/pkg-message.in +++ b/sysutils/anvil/files/pkg-message.in @@ -1,6 +1,6 @@ - -**************************************************************************** - +[ +{ type: install + message: <<EOM After installing anvil, this is a short checklist of things to do, depending on which tools are using. @@ -43,6 +43,6 @@ MAILTO=you@example.org 19 20 * * * /usr/local/bin/cert-shifter ### - -**************************************************************************** - +EOM +} +] diff --git a/sysutils/apcpwr/files/pkg-message.in b/sysutils/apcpwr/files/pkg-message.in index 44320d5c8b2e..571ca8f551a8 100644 --- a/sysutils/apcpwr/files/pkg-message.in +++ b/sysutils/apcpwr/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Please copy the file %%PREFIX%%/etc/apcpwr.conf.dist to @@ -11,3 +14,6 @@ WARNING: WARNING WARNING WARNING WARNING WARNING WARNING This port is usable only by root unless the perl utility program /usr/bin/suidperl is installed with setuid permissions. +EOM +} +] diff --git a/sysutils/apcupsd/files/pkg-message.in b/sysutils/apcupsd/files/pkg-message.in index 112896765704..6af80aada141 100644 --- a/sysutils/apcupsd/files/pkg-message.in +++ b/sysutils/apcupsd/files/pkg-message.in @@ -1,4 +1,6 @@ -********************************************************************** +[ +{ type: install + message: <<EOM Read the manual: http://www.apcupsd.org/manual/manual.html http://www.apcupsd.org/manual/manual.pdf @@ -26,5 +28,6 @@ line: test -f /var/run/powerfail && /usr/local/sbin/apcupsd --hibernate or test -f /var/run/powerfail && /usr/local/sbin/apcupsd --power-off - -********************************************************************** +EOM +} +] diff --git a/sysutils/archivemount/files/pkg-message.in b/sysutils/archivemount/files/pkg-message.in index 467d62ec0c3d..7abb21443b2d 100644 --- a/sysutils/archivemount/files/pkg-message.in +++ b/sysutils/archivemount/files/pkg-message.in @@ -1,8 +1,10 @@ -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - +[ +{ type: install + message: <<EOM Make sure you have fuse.ko loaded then use archivemount or mount_archive command or add an entry to the /etc/fstab such as: /path/to/archive /mnt/path fusefs ro,late,mountprog=%%PREFIX%%/sbin/mount_archive 0 0 - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +EOM +} +] diff --git a/sysutils/asfsm/files/pkg-message.in b/sysutils/asfsm/files/pkg-message.in index 1c7ee9dd8012..521e989dd384 100644 --- a/sysutils/asfsm/files/pkg-message.in +++ b/sysutils/asfsm/files/pkg-message.in @@ -1,4 +1,9 @@ - +[ +{ type: install + message: <<EOM If you would like to be able to mount and umount file systems using asfsm, as root, type \`chmod 4555 %%PREFIX%%/bin/asfsm\` NOTE: This opens a SECURITY HOLE as ALL users will have this ability. +EOM +} +] diff --git a/sysutils/asusoled/files/pkg-message.in b/sysutils/asusoled/files/pkg-message.in index 97ecadca7711..0eb1cddd28b6 100644 --- a/sysutils/asusoled/files/pkg-message.in +++ b/sysutils/asusoled/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Please note this utility requires ugen(4). Try: kldstat -m uhub/ugen @@ -44,3 +47,6 @@ Similarly, you can enable or test 'oled_clock', of course. :-) Enjoy! Jung-uk Kim <jkim@FreeBSD.org> +EOM +} +] diff --git a/sysutils/atop/files/pkg-message.in b/sysutils/atop/files/pkg-message.in index d3d983bb98af..0f0053e150df 100644 --- a/sysutils/atop/files/pkg-message.in +++ b/sysutils/atop/files/pkg-message.in @@ -1,5 +1,6 @@ -**************************************************************************** - +[ +{ type: install + message: <<EOM atop succesfully installed. To run in interactive mode use "atop" command. To run the atop in collecting mode from startup, add @@ -17,5 +18,6 @@ variable in your /etc/rc.conf file. To change default (10 seconds) interval use atop_inteval (e.g. atop_interval=5) in /etc/rc.conf - -**************************************************************************** +EOM +} +] diff --git a/sysutils/autojump/pkg-message b/sysutils/autojump/pkg-message index 651d03afefe1..1da40217e040 100644 --- a/sysutils/autojump/pkg-message +++ b/sysutils/autojump/pkg-message @@ -1,6 +1,10 @@ -************************************************************** -* AutoJump installed -************************************************************** -* Note: Your /etc/profile was changed for this installation. -* changes will be reverted when you un-install the package. -************************************************************** +[ +{ type: install + message: <<EOM + AutoJump installed + + Note: Your /etc/profile was changed for this installation. + changes will be reverted when you un-install the package. +EOM +} +] diff --git a/sysutils/autopsy/pkg-message b/sysutils/autopsy/pkg-message index 8ac4a41713dc..485846fe25f5 100644 --- a/sysutils/autopsy/pkg-message +++ b/sysutils/autopsy/pkg-message @@ -1,9 +1,9 @@ - ---------------------------------------------------------------- - +[ +{ type: install + message: <<EOM Default autopsy configuration file is /usr/local/lib/autopsy/conf.pl ---------------------------------------------------------------- + The NIST National Software Reference Library (NSRL) contains hash values of known good and bad files. @@ -18,17 +18,18 @@ The index file NSRLFile.txt-md5.idx must be in the same directory. If it does not exist it may be created with the TSK hfind command: hfind -i nsrl-md5 /path/to/NSRLFile.txt ---------------------------------------------------------------- + Autopsy saves configuration files, audit logs, and output to the Evidence Locker directory. You MUST specify this with the LOCKDIR configuration entry before running Autopsy: LOCKDIR = /path/to/locker ---------------------------------------------------------------- + WARNING: The cross-platform version of Autopsy is no longer actively developed. This port is retained mainly to allow users with saved data to migrate to another forensic tool. - ---------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/azure-agent/pkg-message b/sysutils/azure-agent/pkg-message index 0260b514832a..d4f2c5ab9760 100644 --- a/sysutils/azure-agent/pkg-message +++ b/sysutils/azure-agent/pkg-message @@ -1,7 +1,11 @@ -========================================================== +[ +{ type: install + message: <<EOM To enable waagent, add the following line to rc.conf: waagent_enable="YES" This will make sure waagent is started at boot. -========================================================== +EOM +} +] diff --git a/sysutils/backuppc-devel/files/pkg-message.in b/sysutils/backuppc-devel/files/pkg-message.in index 2efac6d40d07..4631b55a9a03 100644 --- a/sysutils/backuppc-devel/files/pkg-message.in +++ b/sysutils/backuppc-devel/files/pkg-message.in @@ -1,4 +1,6 @@ -========================================================================== +[ +{ type: install + message: <<EOM - If this is a new installation or version upgrade, to create/update configuration you should run @@ -24,4 +26,6 @@ restore command to 5 ('-d 5') in the main configuration, for instance $Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 5 -c tarmode\\ full -Tx -'; -========================================================================== +EOM +} +] diff --git a/sysutils/backuppc/files/pkg-message.in b/sysutils/backuppc/files/pkg-message.in index e7e9247a8361..0adeb746f93f 100644 --- a/sysutils/backuppc/files/pkg-message.in +++ b/sysutils/backuppc/files/pkg-message.in @@ -1,4 +1,6 @@ -========================================================================== +[ +{ type: install + message: <<EOM - If this is a new installation or version upgrade, to create/update configuration you should run @@ -18,4 +20,6 @@ restore command to 5 ('-d 5') in the main configuration, for instance $Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 5 -c tarmode\\ full -Tx -'; -========================================================================== +EOM +} +] diff --git a/sysutils/backuppc4/files/pkg-message.in b/sysutils/backuppc4/files/pkg-message.in index 2efac6d40d07..4631b55a9a03 100644 --- a/sysutils/backuppc4/files/pkg-message.in +++ b/sysutils/backuppc4/files/pkg-message.in @@ -1,4 +1,6 @@ -========================================================================== +[ +{ type: install + message: <<EOM - If this is a new installation or version upgrade, to create/update configuration you should run @@ -24,4 +26,6 @@ restore command to 5 ('-d 5') in the main configuration, for instance $Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 5 -c tarmode\\ full -Tx -'; -========================================================================== +EOM +} +] diff --git a/sysutils/bacula9-server/files/pkg-message.client.in b/sysutils/bacula9-server/files/pkg-message.client.in index c4041a26df11..cf425148025f 100644 --- a/sysutils/bacula9-server/files/pkg-message.client.in +++ b/sysutils/bacula9-server/files/pkg-message.client.in @@ -1,8 +1,10 @@ -################################################################################ - +[ +{ type: install + message: <<EOM NOTE: Sample files are installed in %%PREFIX%%/etc/bacula: bconsole.conf.sample, bacula-fd.conf.sample - -################################################################################ +EOM +} +] diff --git a/sysutils/bacula9-server/files/pkg-message.server.in b/sysutils/bacula9-server/files/pkg-message.server.in index d694599140fc..fe6259186583 100644 --- a/sysutils/bacula9-server/files/pkg-message.server.in +++ b/sysutils/bacula9-server/files/pkg-message.server.in @@ -1,5 +1,6 @@ -############################################################################### - +[ +{ type: install + message: <<EOM bacula server was installed A database upgrade is required if upgrading from Bacula < 9.0. @@ -53,5 +54,6 @@ ReleaseNotes If you are using sqlite you need to run the make_sqlite_tables script as the bacula user. Do this using 'sudo su -m bacula'. - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos-server/files/pkg-message.client.in b/sysutils/bareos-server/files/pkg-message.client.in index c2d12358cf68..b3e2d5825e13 100644 --- a/sysutils/bareos-server/files/pkg-message.client.in +++ b/sysutils/bareos-server/files/pkg-message.client.in @@ -1,5 +1,6 @@ -################################################################################ - +[ +{ type: install + message: <<EOM bareos client was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-fd.d/ and @@ -11,5 +12,6 @@ bareos client was installed to /etc/rc.conf bareos_fd_config="%%PREFIX%%/etc/bareos/bareos-fd.conf" - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos-server/files/pkg-message.server.in b/sysutils/bareos-server/files/pkg-message.server.in index 836127358d83..3bb0ef535ce1 100644 --- a/sysutils/bareos-server/files/pkg-message.server.in +++ b/sysutils/bareos-server/files/pkg-message.server.in @@ -1,5 +1,6 @@ -############################################################################### - +[ +{ type: install + message: <<EOM bareos server was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-dir.d/ and @@ -68,5 +69,6 @@ database update procedure. If you are using sqlite you need to run the make_sqlite_tables script as the bareos user. Do this using 'sudo su -m bareos'. - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos16-server/files/pkg-message.client.in b/sysutils/bareos16-server/files/pkg-message.client.in index c2d12358cf68..b3e2d5825e13 100644 --- a/sysutils/bareos16-server/files/pkg-message.client.in +++ b/sysutils/bareos16-server/files/pkg-message.client.in @@ -1,5 +1,6 @@ -################################################################################ - +[ +{ type: install + message: <<EOM bareos client was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-fd.d/ and @@ -11,5 +12,6 @@ bareos client was installed to /etc/rc.conf bareos_fd_config="%%PREFIX%%/etc/bareos/bareos-fd.conf" - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos16-server/files/pkg-message.server.in b/sysutils/bareos16-server/files/pkg-message.server.in index 836127358d83..3bb0ef535ce1 100644 --- a/sysutils/bareos16-server/files/pkg-message.server.in +++ b/sysutils/bareos16-server/files/pkg-message.server.in @@ -1,5 +1,6 @@ -############################################################################### - +[ +{ type: install + message: <<EOM bareos server was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-dir.d/ and @@ -68,5 +69,6 @@ database update procedure. If you are using sqlite you need to run the make_sqlite_tables script as the bareos user. Do this using 'sudo su -m bareos'. - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos17-server/files/pkg-message.client.in b/sysutils/bareos17-server/files/pkg-message.client.in index c2d12358cf68..b3e2d5825e13 100644 --- a/sysutils/bareos17-server/files/pkg-message.client.in +++ b/sysutils/bareos17-server/files/pkg-message.client.in @@ -1,5 +1,6 @@ -################################################################################ - +[ +{ type: install + message: <<EOM bareos client was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-fd.d/ and @@ -11,5 +12,6 @@ bareos client was installed to /etc/rc.conf bareos_fd_config="%%PREFIX%%/etc/bareos/bareos-fd.conf" - -################################################################################ +EOM +} +] diff --git a/sysutils/bareos17-server/files/pkg-message.server.in b/sysutils/bareos17-server/files/pkg-message.server.in index 836127358d83..3bb0ef535ce1 100644 --- a/sysutils/bareos17-server/files/pkg-message.server.in +++ b/sysutils/bareos17-server/files/pkg-message.server.in @@ -1,5 +1,6 @@ -############################################################################### - +[ +{ type: install + message: <<EOM bareos server was installed 1) Sample files are installed in %%PREFIX%%/etc/bareos/bareos-dir.d/ and @@ -68,5 +69,6 @@ database update procedure. If you are using sqlite you need to run the make_sqlite_tables script as the bareos user. Do this using 'sudo su -m bareos'. - -################################################################################ +EOM +} +] diff --git a/sysutils/bhyve-rc/pkg-message b/sysutils/bhyve-rc/pkg-message index 61d059421d10..174f50b25e59 100644 --- a/sysutils/bhyve-rc/pkg-message +++ b/sysutils/bhyve-rc/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Configuration is done completely though rc.conf. The rc script won't touch any devices for you (neither disk, nor tap) so you need to make sure all of those have been initialized properly. @@ -53,3 +56,6 @@ service bhyve stop virt2 # stop individual service bhyve stop # stop all (by default ctrl-b d detaches from tmux). +EOM +} +] diff --git a/sysutils/boxbackup-devel/files/pkg-message.client b/sysutils/boxbackup-devel/files/pkg-message.client index e804b44d94b9..2547d7d4cc05 100644 --- a/sysutils/boxbackup-devel/files/pkg-message.client +++ b/sysutils/boxbackup-devel/files/pkg-message.client @@ -1,4 +1,9 @@ - +[ +{ type: install + message: <<EOM To run bbackupd at startup, add bbackupd_enable="YES" to /etc/rc.conf Please see http://www.boxbackup.org/client.html for client configuration options +EOM +} +] diff --git a/sysutils/boxbackup-devel/files/pkg-message.server b/sysutils/boxbackup-devel/files/pkg-message.server index 872c82bf5ed8..5820d067bfe1 100644 --- a/sysutils/boxbackup-devel/files/pkg-message.server +++ b/sysutils/boxbackup-devel/files/pkg-message.server @@ -1,4 +1,9 @@ - +[ +{ type: install + message: <<EOM To run bbstored at startup, add bbstored_enable="YES" to /etc/rc.conf Please see http://www.boxbackup.org/server.html for server configuration options +EOM +} +] diff --git a/sysutils/bsd-splash-changer/files/pkg-message.in b/sysutils/bsd-splash-changer/files/pkg-message.in index 5d2ff729f441..28218645b28c 100644 --- a/sysutils/bsd-splash-changer/files/pkg-message.in +++ b/sysutils/bsd-splash-changer/files/pkg-message.in @@ -1,5 +1,6 @@ -============================================================================== - +[ +{ type: install + message: <<EOM To use the port you need to perform the following steps: 1) Place your image files into %%DATADIR%%. @@ -14,5 +15,6 @@ To use the port you need to perform the following steps: Also, be careful if you already have a file "/boot/splash" because it will be replaced when the script is executed. - -============================================================================== +EOM +} +] diff --git a/sysutils/bsdstats/files/pkg-message.in b/sysutils/bsdstats/files/pkg-message.in index 6742a7658f4f..7c9c0da60ce5 100644 --- a/sysutils/bsdstats/files/pkg-message.in +++ b/sysutils/bsdstats/files/pkg-message.in @@ -1,4 +1,6 @@ -====================================================================== +[ +{ type: install + message: <<EOM You installed BSDstats: script reporting statistics about your machine To disable monthly reporting, add this line to /etc/periodic.conf: @@ -18,4 +20,6 @@ To view current statistics, go to: http://www.bsdstats.org/ @@TOR_MESSAGE@@ -====================================================================== +EOM +} +] diff --git a/sysutils/btsixad/pkg-message b/sysutils/btsixad/pkg-message index b6fb92cb0313..5aa92f8222c5 100644 --- a/sysutils/btsixad/pkg-message +++ b/sysutils/btsixad/pkg-message @@ -1,5 +1,11 @@ +[ +{ type: install + message: <<EOM 1) A devd(8) configuration file has been installed. Please restart devd: # service devd restart 2) Add btsixad_enable=YES to /etc/rc.conf. See btsixad(8) for other options. +EOM +} +] diff --git a/sysutils/byobu/pkg-message b/sysutils/byobu/pkg-message index b63f67574096..9b5cb832d96f 100644 --- a/sysutils/byobu/pkg-message +++ b/sysutils/byobu/pkg-message @@ -1,5 +1,6 @@ -====================================================================== - +[ +{ type: install + message: <<EOM byobu requires linprocfs(5) mounted on /compat/linux/proc If you have not done it yet, please do the following: @@ -10,5 +11,6 @@ If you have not done it yet, please do the following: To make it permanent, you need the following line in /etc/fstab: linproc /compat/linux/proc linprocfs rw,late 0 0 - -====================================================================== +EOM +} +] diff --git a/sysutils/cbsd/files/pkg-message.in b/sysutils/cbsd/files/pkg-message.in index 1d8dd6814113..e1ddcadd7bf4 100644 --- a/sysutils/cbsd/files/pkg-message.in +++ b/sysutils/cbsd/files/pkg-message.in @@ -1,5 +1,6 @@ -=============================================================================== - +[ +{ type: install + message: <<EOM cbsd is now installed, but requires additional setup steps: Upon initial installation, run: @@ -11,5 +12,6 @@ Where /path is the path to the cbsd workdir, e.g.: /usr/jails For upgrading an existing installation, run: cbsd initenv - -=============================================================================== +EOM +} +] diff --git a/sysutils/cdrtools-devel/files/pkg-message.in b/sysutils/cdrtools-devel/files/pkg-message.in index 2e93701dd3dc..48b73aede39f 100644 --- a/sysutils/cdrtools-devel/files/pkg-message.in +++ b/sysutils/cdrtools-devel/files/pkg-message.in @@ -1,5 +1,6 @@ -=========================================================================== - +[ +{ type: install + message: <<EOM Note: The location of the cdrtools `defaults' files has been set to %%PREFIX%%/etc @@ -9,5 +10,6 @@ standard location, which is /etc/default. The reason for this is that FreeBSD ports and packages should not use configuration files outside of %%PREFIX%%. - -=========================================================================== +EOM +} +] diff --git a/sysutils/cdrtools/files/pkg-message.in b/sysutils/cdrtools/files/pkg-message.in index 2e93701dd3dc..48b73aede39f 100644 --- a/sysutils/cdrtools/files/pkg-message.in +++ b/sysutils/cdrtools/files/pkg-message.in @@ -1,5 +1,6 @@ -=========================================================================== - +[ +{ type: install + message: <<EOM Note: The location of the cdrtools `defaults' files has been set to %%PREFIX%%/etc @@ -9,5 +10,6 @@ standard location, which is /etc/default. The reason for this is that FreeBSD ports and packages should not use configuration files outside of %%PREFIX%%. - -=========================================================================== +EOM +} +] diff --git a/sysutils/clockspeed/files/pkg-message.in b/sysutils/clockspeed/files/pkg-message.in index bb371d57c28d..d1aa37bbafd6 100644 --- a/sysutils/clockspeed/files/pkg-message.in +++ b/sysutils/clockspeed/files/pkg-message.in @@ -1,5 +1,6 @@ - ATTENTIONATTENTION: - +[ +{ type: install + message: <<EOM Please make sure that you read %%PREFIX%%/share/doc/clockspeed/INSTALL. It contains important information about testing and configuring clockspeed, and finally installing it in your system. @@ -48,3 +49,6 @@ A port to non-i386 platforms was done using the clock_gettime(2) function. Since this is somewhat experimental, there might be some tiny precision differences from the i386 platform versions. You have been warned! +EOM +} +] diff --git a/sysutils/clonehdd/pkg-message b/sysutils/clonehdd/pkg-message index 45ee669257b4..112ec5670598 100644 --- a/sysutils/clonehdd/pkg-message +++ b/sysutils/clonehdd/pkg-message @@ -1,9 +1,11 @@ ----------------------------------------------------------------------- -## ATTENTION! ## ATTENTION! ## ATTENTION! ## - +[ +{ type: install + message: <<EOM This tool can damage your data if you will use it without understanding how it works! Please, run "man clonehdd" or read README file. All questions you can ask on http://sourceforge.net/projects/clonehdd ----------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/clsync/files/pkg-message.in b/sysutils/clsync/files/pkg-message.in index b282da39ed9f..ab1dc7ba0288 100644 --- a/sysutils/clsync/files/pkg-message.in +++ b/sysutils/clsync/files/pkg-message.in @@ -1,8 +1,10 @@ ------------------------------------------------------------------------------- -Author: Dmtiry Yu Okunev; e-mail: dyokunev@ut.mephi.ru; PGP: 0x8E30679C +[ +{ type: install + message: <<EOM What's left: 1. Edit %%PREFIX%%/etc/clsync/clsync.conf 2. Set clsync_enable="YES" in /etc/rc.conf Start the program: %%PREFIX%%/etc/rc.d/clsync start ------------------------------------------------------------------------------- - +EOM +} +] diff --git a/sysutils/cmocka/pkg-message b/sysutils/cmocka/pkg-message index fc61d55c82fc..ae189ecaac60 100644 --- a/sysutils/cmocka/pkg-message +++ b/sysutils/cmocka/pkg-message @@ -1,5 +1,7 @@ -================================================================= - +[ +{ type: install + message: <<EOM For more information on using cmocka, see https://api.cmocka.org - -================================================================= +EOM +} +] diff --git a/sysutils/cmockery2/pkg-message b/sysutils/cmockery2/pkg-message index 0cc6380c87bb..aaf7c06b330a 100644 --- a/sysutils/cmockery2/pkg-message +++ b/sysutils/cmockery2/pkg-message @@ -1,6 +1,8 @@ -================================================================= - +[ +{ type: install + message: <<EOM For more information on cmockery2, documentation is available at https://github.com/lpabon/cmockery2/blob/master/doc/usage.md - -================================================================= +EOM +} +] diff --git a/sysutils/colorize/files/pkg-message.in b/sysutils/colorize/files/pkg-message.in index ffb1c97cddcf..552f03a42c58 100644 --- a/sysutils/colorize/files/pkg-message.in +++ b/sysutils/colorize/files/pkg-message.in @@ -1,5 +1,9 @@ ---------------------------------------------------------------------------- +[ +{ type: install + message: <<EOM To customize the colorize utility, you can make changes to %%PREFIX%%/etc/colorizerc or user-specific changes in ~/.colorizerc ---------------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/condor/files/pkg-message.in b/sysutils/condor/files/pkg-message.in index 66822d93c1ac..d4d63544720d 100644 --- a/sysutils/condor/files/pkg-message.in +++ b/sysutils/condor/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM Edit %%PREFIX%%/etc/condor_config.local to taste to get started. Settings in condor_config.local override the defaults in condor_config. @@ -15,4 +17,6 @@ To start the condor daemons, add 'condor_enable="YES"' to and run service condor start - +EOM +} +] diff --git a/sysutils/cpupdate/files/pkg-message.in b/sysutils/cpupdate/files/pkg-message.in index 7f13dead3a38..c1b400fd6afc 100644 --- a/sysutils/cpupdate/files/pkg-message.in +++ b/sysutils/cpupdate/files/pkg-message.in @@ -1,4 +1,6 @@ -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +[ +{ type: install + message: <<EOM NOTE: The following directories %%CPM_DIR%% @@ -9,7 +11,9 @@ if you have just built the port with corresponding CPM/INTEL option(s) enabled. In this case you can run "make install-microcodes" to install them to %%DATADIR%% -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Suspend/resume sequence clears microcode update, so make sure your system runs "service cpupdate start" again on resume. -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +EOM +} +] diff --git a/sysutils/debootstrap/pkg-message b/sysutils/debootstrap/pkg-message index 697d07996ac4..3bc006c5700f 100644 --- a/sysutils/debootstrap/pkg-message +++ b/sysutils/debootstrap/pkg-message @@ -1,5 +1,10 @@ -*** NOTE *** +[ +{ type: install + message: <<EOM To successfully create an installation of Debian GNU/kFreeBSD debootstrap requires the following kernel modules loaded: fdescfs linprocfs linsysfs tmpfs +EOM +} +] diff --git a/sysutils/devcpu-data/pkg-message b/sysutils/devcpu-data/pkg-message index e896ac222ec1..b645f50bc138 100644 --- a/sysutils/devcpu-data/pkg-message +++ b/sysutils/devcpu-data/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Installing this port will allow host startup to update the CPU microcode on a FreeBSD system automatically. There are two methods for updating CPU microcode: the first methods loads and applies the update before the kernel @@ -38,3 +41,6 @@ Updating CPU Microcode... /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl4 from rev 0x17 to rev 0x22... done. /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl6 from rev 0x17 to rev 0x22... done. Done. +EOM +} +] diff --git a/sysutils/docker-freebsd/pkg-message b/sysutils/docker-freebsd/pkg-message index bd81519739ec..2d66be114f9b 100644 --- a/sysutils/docker-freebsd/pkg-message +++ b/sysutils/docker-freebsd/pkg-message @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM Docker requires a bit of setup before usage. You will need to create a ZFS dataset on /usr/docker @@ -19,3 +21,6 @@ Where $iface is the default NIC on the system, or the value of $docker_nat_iface. This is for network connectivity to docker containers in this early port. This should not be needed in future versions of docker. +EOM +} +] diff --git a/sysutils/docker/pkg-message b/sysutils/docker/pkg-message index 9af3fe6fd0e6..ceaa00075c1f 100644 --- a/sysutils/docker/pkg-message +++ b/sysutils/docker/pkg-message @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM This port contains Docker client only. For Docker server support, install docker-machine. +EOM +} +] diff --git a/sysutils/doinkd/pkg-message b/sysutils/doinkd/pkg-message index 4b30e9e37261..92517369d900 100644 --- a/sysutils/doinkd/pkg-message +++ b/sysutils/doinkd/pkg-message @@ -1,8 +1,9 @@ +[ +{ type: install + message: <<EOM Idled Copyright (c) 1995-1996 Mike Crider (crider@cs.hope.edu) All rights reserved. -***************************************************************** -***************************************************************** REDISTRIBUTION AND USE IN SOURCE AND BINARY FORMS FOR NON-PROFIT USE ARE PERMITTED PROVIDED THAT: @@ -33,6 +34,6 @@ requests for modification of this program, please contact: Mike Crider crider@cs.hope.edu - -***************************************************************** -***************************************************************** +EOM +} +] diff --git a/sysutils/downtimed/pkg-message b/sysutils/downtimed/pkg-message index d4d726da55a7..8445866c2450 100644 --- a/sysutils/downtimed/pkg-message +++ b/sysutils/downtimed/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM ===> IMPORTANT NOTE: To set up downtimed, you need to edit one of the following @@ -11,3 +14,6 @@ Add the following line to change the default options, see downtimed(8): downtimed_flags="<set as needed>" +EOM +} +] diff --git a/sysutils/dsbbatmon/pkg-message b/sysutils/dsbbatmon/pkg-message index 685e3b4b128b..ca7e7c7ada3d 100644 --- a/sysutils/dsbbatmon/pkg-message +++ b/sysutils/dsbbatmon/pkg-message @@ -1,5 +1,6 @@ -************************************************************************** - +[ +{ type: install + message: <<EOM In order to be able to execute shutdown as regular user, you can either use sudo(8) (see below), or you can add your username to the operator group: @@ -14,5 +15,6 @@ to ${PREFIX}/etc/sudoers. NOTE: On FreeBSD >= 12, members of the operator group are allowed to suspend the system via acpiconf(8). Using sudo(8) is not necessary. - -************************************************************************** +EOM +} +] diff --git a/sysutils/dsblogoutmgr/pkg-message b/sysutils/dsblogoutmgr/pkg-message index 5c7097e36ae7..1432a58903b9 100644 --- a/sysutils/dsblogoutmgr/pkg-message +++ b/sysutils/dsblogoutmgr/pkg-message @@ -1,6 +1,8 @@ -************************************************************************** - +[ +{ type: install + message: <<EOM Please read the manual page (man dsblogoutmgr) to learn how to configure DSBLogoutmgr. - -************************************************************************** +EOM +} +] diff --git a/sysutils/duplicity/pkg-message b/sysutils/duplicity/pkg-message index 4f191389c897..18762697c34c 100644 --- a/sysutils/duplicity/pkg-message +++ b/sysutils/duplicity/pkg-message @@ -1,26 +1,29 @@ -************************************************************************* -* The following backends are supported by duplicity itself, but will * -* require manual installation of their respective dependencies because * -* they are not yet available in the ports tree: * -* * -* - The Dropbox backend * -* - The HSI backend * -* - The mega backend for mega.co.nz * -* - The swift backend for OpenStack Object Storage * -* - The tahoe backend for Tahoe-LAFS * -* * -* Please refer to upstream duplicity documentation for information on * -* the use of these backends. * -************************************************************************* -* * -* For gnupg 2 insert "pinentry-mode loopback" into ~/.gnupg/gpg.conf * -* and "allow-loopback-pinentry" into ~/.gnupg/gpg-agent.conf * -* * -************************************************************************* -* * -* Some fixes related to gnupg handling were made in v0.7.12. * -* * -* Please visit the following URL for more information: * -* http://duplicity.nongnu.org/CHANGELOG * -* * -************************************************************************* +[ +{ type: install + message: <<EOM + The following backends are supported by duplicity itself, but will + require manual installation of their respective dependencies because + they are not yet available in the ports tree: + + - The Dropbox backend + - The HSI backend + - The mega backend for mega.co.nz + - The swift backend for OpenStack Object Storage + - The tahoe backend for Tahoe-LAFS + + Please refer to upstream duplicity documentation for information on + the use of these backends. + + + For gnupg 2 insert "pinentry-mode loopback" into ~/.gnupg/gpg.conf + and "allow-loopback-pinentry" into ~/.gnupg/gpg-agent.conf + + + + Some fixes related to gnupg handling were made in v0.7.12. + + Please visit the following URL for more information: + http://duplicity.nongnu.org/CHANGELOG +EOM +} +] diff --git a/sysutils/duply/files/pkg-message.in b/sysutils/duply/files/pkg-message.in index fe1966a2edd6..7630554d4ff9 100644 --- a/sysutils/duply/files/pkg-message.in +++ b/sysutils/duply/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM To run duply periodically you can add these options to your /etc/periodic.conf or /etc/periodic.conf.local @@ -23,3 +25,6 @@ Add these lines to your /etc/crontab 10 3 * * * root periodic backup +EOM +} +] diff --git a/sysutils/dvdisaster/files/pkg-message.in b/sysutils/dvdisaster/files/pkg-message.in index 29dbe67a15bb..78d475d8d7cd 100644 --- a/sysutils/dvdisaster/files/pkg-message.in +++ b/sysutils/dvdisaster/files/pkg-message.in @@ -1,8 +1,12 @@ ----------------------------------------------------------------------- +[ +{ type: install + message: <<EOM If there are problems detecting optical drives, please see the files DEVICES.md or DEVICES.html in the directory: %%DOCSDIR%% Note that the documentation option (DOCS) must be selected for these files to be installed. ----------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/e2fsprogs/pkg-message b/sysutils/e2fsprogs/pkg-message index fb054e0f5c00..8bc2492b8c54 100644 --- a/sysutils/e2fsprogs/pkg-message +++ b/sysutils/e2fsprogs/pkg-message @@ -1,5 +1,9 @@ -=========================================================================== +[ +{ type: install + message: <<EOM Note: this is a modified version of the e2fsprogs package, not the official package. Report all building and run-time trouble that originates in the package to the port maintainer, mandree@FreeBSD.org. -=========================================================================== +EOM +} +] diff --git a/sysutils/eject/pkg-message b/sysutils/eject/pkg-message index 991dd8dacc0a..bc2c89c180ce 100644 --- a/sysutils/eject/pkg-message +++ b/sysutils/eject/pkg-message @@ -1,8 +1,12 @@ ------------------------------------------------------------------------- +[ +{ type: install + message: <<EOM NOTE: This port is no longer installed with SETUID, because it allows non-privileged users to unmount a filesystem. To enable your users to eject the CD-ROM, install security/sudo and enter the following line in /usr/local/etc/sudoers: %users ALL=/usr/local/sbin/eject /dev/acd0 ------------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/env4801/files/pkg-message.in b/sysutils/env4801/files/pkg-message.in index 0df42d546ea4..dc63b757516a 100644 --- a/sysutils/env4801/files/pkg-message.in +++ b/sysutils/env4801/files/pkg-message.in @@ -1,5 +1,6 @@ - -================================================================ +[ +{ type: install + message: <<EOM This port installed %%PREFIX%%/etc/rc.d/env4801.sh to initialize the hardware at boot time. The env4801 utility will only run on a Soekris Engineering Net4801 device. See pkg-descr for more @@ -7,4 +8,6 @@ information as currently there is no manpage. Make sure you have /dev/io enabled by putting io_load="YES" in /boot/loader.conf or device io in your kernel config file. -================================================================ +EOM +} +] diff --git a/sysutils/fcron/files/pkg-message.in b/sysutils/fcron/files/pkg-message.in index 04257be00f2b..6003e2a9841c 100644 --- a/sysutils/fcron/files/pkg-message.in +++ b/sysutils/fcron/files/pkg-message.in @@ -1,4 +1,6 @@ -=============================================================================== +[ +{ type: install + message: <<EOM To enable fcron, and disable the default system cron, add the following lines to your /etc/rc.conf: @@ -11,4 +13,6 @@ and move any jobs in /etc/crontab to the root fcrontab(5) file. See: for a translation of the default FreeBSD /etc/crontab, and for sample PAM configuration files. -=============================================================================== +EOM +} +] diff --git a/sysutils/feather/files/pkg-message.in b/sysutils/feather/files/pkg-message.in index ce9455a7c3c4..8156116881aa 100644 --- a/sysutils/feather/files/pkg-message.in +++ b/sysutils/feather/files/pkg-message.in @@ -1,5 +1,6 @@ -***************************************************************** - +[ +{ type: install + message: <<EOM Feather is designed to be run from cron like this: */5 * * * * %%PREFIX%%/bin/feather %%PREFIX%%/etc/feather.yaml @@ -7,5 +8,6 @@ Feather is designed to be run from cron like this: If installed, please check the contents of %%DOCSDIR%%/README for the syntax of the YAML file, as well as the sample file at %%PREFIX%%/etc/feather.yaml.dist. - -***************************************************************** +EOM +} +] diff --git a/sysutils/filewatcherd/files/pkg-message.in b/sysutils/filewatcherd/files/pkg-message.in index ea28c51c6d98..fd9493e7c84e 100644 --- a/sysutils/filewatcherd/files/pkg-message.in +++ b/sysutils/filewatcherd/files/pkg-message.in @@ -1,4 +1,6 @@ -======================================================================== +[ +{ type: install + message: <<EOM filwatcherd configuration files were installed in the following directory: %%PREFIX%% @@ -22,4 +24,6 @@ following steps: Then you can start filewatcherd by issuing the following command: service filewatcherd start -======================================================================== +EOM +} +] diff --git a/sysutils/flexbackup/files/pkg-message.in b/sysutils/flexbackup/files/pkg-message.in index a1dd3d0a7898..1f28d3a9c3be 100644 --- a/sysutils/flexbackup/files/pkg-message.in +++ b/sysutils/flexbackup/files/pkg-message.in @@ -1,5 +1,6 @@ ---------------- Flexbackup Configuration Information --------------- - +[ +{ type: install + message: <<EOM Flexbackup needs to have its configuration file placed in %%PREFIX%%/etc. A template copy of this configuration file has been installed into @@ -17,13 +18,9 @@ NOTE: The flexbackup.conf file will not be removed or overwritten by future package removals or upgrades once you have customized it. -*************************************************************** -** Changes have occurred in this file up to and including ** -** version 1.2.0! ** -*************************************************************** - Also see %%PREFIX%%/share/doc/flexbackup/README for more information on how to use flexbackup. Man pages have also been written and included in this version of the port! - --------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/freebsd-snapshot/files/pkg-message.in b/sysutils/freebsd-snapshot/files/pkg-message.in index 73e95f3a4732..a98d6b65f5ad 100644 --- a/sysutils/freebsd-snapshot/files/pkg-message.in +++ b/sysutils/freebsd-snapshot/files/pkg-message.in @@ -1,6 +1,8 @@ - +[ +{ type: install + message: <<EOM Using periodic for flexible snapshot backup creation ----------------------------------------------------- + Edit your crontab and include this: @@ -15,13 +17,16 @@ and edit your periodic.conf and include this: snapshot_enable="YES" snapshot_schedule="/,/usr:2:1:0 /var:0:2:4 /home:2:6:8@8,12,16,20" ----- + Using auto-mount for easy access to snapshot data --------------------------------------------------- + Edit your rc.conf and include this: # UFS2/ZFS Snapshot Access amd_enable="YES" amd_flags="-a /.am -c 1800 -w 60 -l syslog /snap %%PREFIX%%/etc/amd.map.snap" +EOM +} +] diff --git a/sysutils/freesbie/pkg-message b/sysutils/freesbie/pkg-message index 59d7fa4cb857..d7cbe07d92a7 100644 --- a/sysutils/freesbie/pkg-message +++ b/sysutils/freesbie/pkg-message @@ -1,5 +1,9 @@ -=========================================================================== +[ +{ type: install + message: <<EOM Note that the FreeSBIE project is not actively maintained. There were no upstream releases since 2007. If you are a regular user of this port, please consider adopting the upstream project. -=========================================================================== +EOM +} +] diff --git a/sysutils/froxlor/files/pkg-message.in b/sysutils/froxlor/files/pkg-message.in index fa216ec580ba..e9a078a56589 100644 --- a/sysutils/froxlor/files/pkg-message.in +++ b/sysutils/froxlor/files/pkg-message.in @@ -1,6 +1,6 @@ - -------------------------------------------------------- - +[ +{ type: install + message: <<EOM Please visit froxlor's website for more information. You will want to check and eventually modify some of @@ -14,4 +14,6 @@ for more information. Froxlor has been installed to the following location: %%WWWDIR%% -------------------------------------------------------- +EOM +} +] diff --git a/sysutils/fusefs-afuse/files/pkg-message.in b/sysutils/fusefs-afuse/files/pkg-message.in index c5e420f09692..bf89bc245d9b 100644 --- a/sysutils/fusefs-afuse/files/pkg-message.in +++ b/sysutils/fusefs-afuse/files/pkg-message.in @@ -1,7 +1,8 @@ - -=============================================================================== - +[ +{ type: install + message: <<EOM Additional info about program usage can be found at %%DOCSDIR%%/README. - -=============================================================================== +EOM +} +] diff --git a/sysutils/fusefs-ext4fuse/pkg-message b/sysutils/fusefs-ext4fuse/pkg-message index 7450c30f7720..91876b9b8025 100644 --- a/sysutils/fusefs-ext4fuse/pkg-message +++ b/sysutils/fusefs-ext4fuse/pkg-message @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM Please note that that this port only supports ext4 in read-only mode. You might want to consider using sysutils/fusefs-ext2 which supports ext2, ext3 and ext4 with read write support. +EOM +} +] diff --git a/sysutils/fusefs-ifuse/pkg-message b/sysutils/fusefs-ifuse/pkg-message index 687c92fa9261..d0087f79ebe9 100644 --- a/sysutils/fusefs-ifuse/pkg-message +++ b/sysutils/fusefs-ifuse/pkg-message @@ -1,5 +1,6 @@ -====================================================================== - +[ +{ type: install + message: <<EOM To mount your iGadget you first need to launch usbmuxd; see... $ usbmuxd --help @@ -10,5 +11,6 @@ $ usbmuxd --help After that, you'll be able to reach its files and use, e.g., gtkpod to add/delete music/pictures. - -====================================================================== +EOM +} +] diff --git a/sysutils/fusefs-libs/pkg-message b/sysutils/fusefs-libs/pkg-message index 13b7f2ee9224..d40be03aa3ab 100644 --- a/sysutils/fusefs-libs/pkg-message +++ b/sysutils/fusefs-libs/pkg-message @@ -1 +1,7 @@ +[ +{ type: install + message: <<EOM Install the fuse kernel module to use this port. +EOM +} +] diff --git a/sysutils/fusefs-libs3/pkg-message b/sysutils/fusefs-libs3/pkg-message index 13b7f2ee9224..d40be03aa3ab 100644 --- a/sysutils/fusefs-libs3/pkg-message +++ b/sysutils/fusefs-libs3/pkg-message @@ -1 +1,7 @@ +[ +{ type: install + message: <<EOM Install the fuse kernel module to use this port. +EOM +} +] diff --git a/sysutils/fusefs-ntfs/files/pkg-message.in b/sysutils/fusefs-ntfs/files/pkg-message.in index 8294b7a9c301..35df9fe32ec7 100644 --- a/sysutils/fusefs-ntfs/files/pkg-message.in +++ b/sysutils/fusefs-ntfs/files/pkg-message.in @@ -1,10 +1,12 @@ -============================================================================== - +[ +{ type: install + message: <<EOM NTFS-3G has been installed, for information, known issues and how to report bugs see the FreeBSD README: %%DOCSDIR%%/README.FreeBSD Also see the official README (but has some Linux specific parts). - -============================================================================== +EOM +} +] diff --git a/sysutils/fusefs-s3fs/pkg-message b/sysutils/fusefs-s3fs/pkg-message index 062705179678..3a5515ed080d 100644 --- a/sysutils/fusefs-s3fs/pkg-message +++ b/sysutils/fusefs-s3fs/pkg-message @@ -1 +1,7 @@ +[ +{ type: install + message: <<EOM The usage of s3fs can be found at http://code.google.com/p/s3fs/wiki/FuseOverAmazon if you want to understand it. +EOM +} +] diff --git a/sysutils/fusefs-sandboxfs/pkg-message b/sysutils/fusefs-sandboxfs/pkg-message index d4c535d32842..7ec584f0028f 100644 --- a/sysutils/fusefs-sandboxfs/pkg-message +++ b/sysutils/fusefs-sandboxfs/pkg-message @@ -1,4 +1,10 @@ +[ +{ type: install + message: <<EOM WARNING: The interaction points with sandboxfs are subject to change at this point. In particular, the command-line interface and the data format used to reconfigure sandboxfs while it's running will most certainly change. +EOM +} +] diff --git a/sysutils/fusefs-smbnetfs/files/pkg-message.in b/sysutils/fusefs-smbnetfs/files/pkg-message.in index 6bcdb286390b..e538fe6f2207 100644 --- a/sysutils/fusefs-smbnetfs/files/pkg-message.in +++ b/sysutils/fusefs-smbnetfs/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM ===> Basic Instructions: After kldload fuse.ko and setting @@ -19,3 +22,6 @@ Now you can get access to smb shares in your network, for example: XXX Note, use of Gnome keyring was replaced in version 0.6.1 with XXX libsecret, which this port does not enable by default. +EOM +} +] diff --git a/sysutils/fusefs-sqlfs/pkg-message b/sysutils/fusefs-sqlfs/pkg-message index dacb37bc338c..7d5fccea8529 100644 --- a/sysutils/fusefs-sqlfs/pkg-message +++ b/sysutils/fusefs-sqlfs/pkg-message @@ -1,5 +1,6 @@ -============================================================================== - +[ +{ type: install + message: <<EOM Now sqlfs filesystem is installed. You can mount it by issuing % sqlfs -o /path/to/sqlite/database /path/to/mountpoint @@ -7,5 +8,6 @@ You can mount it by issuing Alternatively you can supply database name via SQLFS_DBNAME env variable For additional information see supplied documentation. - -============================================================================== +EOM +} +] diff --git a/sysutils/fusefs-sshfs/pkg-message b/sysutils/fusefs-sshfs/pkg-message index c5859c9bfd66..187edabe7faf 100644 --- a/sysutils/fusefs-sshfs/pkg-message +++ b/sysutils/fusefs-sshfs/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Basic Instructions: There are three ways to do this: @@ -18,3 +21,6 @@ or % mount_fusefs /dev/fuse0 /path/to/mount/point For further options see ``sshfs -h''. +EOM +} +] diff --git a/sysutils/fusefs-unionfs/files/pkg-message.in b/sysutils/fusefs-unionfs/files/pkg-message.in index 69e13810a121..4859a839c805 100644 --- a/sysutils/fusefs-unionfs/files/pkg-message.in +++ b/sysutils/fusefs-unionfs/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM You will need to load the kernel module 'fuse' to use this package. To load this at boot time, add the following line to /boot/loader.conf: @@ -12,3 +15,6 @@ You can enable them immediately with: kldload fuse sysctl vfs.usermount=1 +EOM +} +] diff --git a/sysutils/fusefs-webdavfs/files/pkg-message.in b/sysutils/fusefs-webdavfs/files/pkg-message.in index 9ac1287a1145..8e9299bcae14 100644 --- a/sysutils/fusefs-webdavfs/files/pkg-message.in +++ b/sysutils/fusefs-webdavfs/files/pkg-message.in @@ -1,8 +1,10 @@ -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - +[ +{ type: install + message: <<EOM Make sure you have fuse.ko loaded then use mount.webdavfs command or add an entry to the /etc/fstab such as: https://webdav.server.net/path /mnt/path fusefs rw,late,mountprog=%%PREFIX%%/sbin/mount_webdavfs,username=login,password=pass,-F=/var/tmp/trace.log,-T=webdav,-T=httpreq,-T=httphdr 0 0 - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +EOM +} +] diff --git a/sysutils/fvcool/files/pkg-message.in b/sysutils/fvcool/files/pkg-message.in index b825562157ae..0dc7c44013fe 100644 --- a/sysutils/fvcool/files/pkg-message.in +++ b/sysutils/fvcool/files/pkg-message.in @@ -1,5 +1,6 @@ -===> How to enable the %%PORTNAME%% package - +[ +{ type: install + message: <<EOM If you want to invoke %%PORTNAME%% automatically on system startup, add the following line to /etc/rc.conf: @@ -19,3 +20,6 @@ Also note that this software is supposed to be used with AMD Athlon (XP) an AMD Duron processors only. +EOM +} +] diff --git a/sysutils/ganglia-monitor-core/files/pkg-message.in b/sysutils/ganglia-monitor-core/files/pkg-message.in index 98a3fae964c4..98cdf28ab2c7 100644 --- a/sysutils/ganglia-monitor-core/files/pkg-message.in +++ b/sysutils/ganglia-monitor-core/files/pkg-message.in @@ -1,6 +1,6 @@ - -====================================================================== - +[ +{ type: install + message: <<EOM First-time configuration: Edit %%PREFIX%%/etc/gmond.conf @@ -9,5 +9,6 @@ to suit your network. To enable services, set gmond_enable/gmond_flags and/or gmetad_enable/gmetad_flags in /etc/rc.conf. - -====================================================================== +EOM +} +] diff --git a/sysutils/ganglia-webfrontend/files/pkg-message.in b/sysutils/ganglia-webfrontend/files/pkg-message.in index ba1b586774d5..0132fd030991 100644 --- a/sysutils/ganglia-webfrontend/files/pkg-message.in +++ b/sysutils/ganglia-webfrontend/files/pkg-message.in @@ -1,5 +1,6 @@ -**************************************************************** - +[ +{ type: install + message: <<EOM The Ganglia Web Frontend has been installed in the directory %%WWWDIR%%. @@ -37,5 +38,6 @@ The default configuration is stored in %%WWWDIR%%/conf_default.php. If you want to customize the configuration make customizations to %%WWWDIR%%/conf.php . - -**************************************************************** +EOM +} +] diff --git a/sysutils/gapcmon/files/pkg-message.in b/sysutils/gapcmon/files/pkg-message.in index 55e18d3e111c..d5e0aa1b97fb 100644 --- a/sysutils/gapcmon/files/pkg-message.in +++ b/sysutils/gapcmon/files/pkg-message.in @@ -1,7 +1,11 @@ -******************************************************************************* +[ +{ type: install + message: <<EOM GapcMon requires apcupsd's Network Information Service (NIS) even for local installations. You may enable apcupsd's NIS by adding the following line to your %%LOCALBASE%%/etc/apcupsd/apcupsd.conf: NETSERVER on -******************************************************************************* +EOM +} +] diff --git a/sysutils/gather/files/pkg-message.in b/sysutils/gather/files/pkg-message.in index 55248905978c..a9ba63018cc8 100644 --- a/sysutils/gather/files/pkg-message.in +++ b/sysutils/gather/files/pkg-message.in @@ -1,5 +1,6 @@ -********************************************************************** - +[ +{ type: install + message: <<EOM To setup statistics gathering you could e.g. add something like this to /etc/crontab: @@ -19,5 +20,6 @@ After setting cron up, you can check if gathering works running: gather show -t 1h grep . uptime See gather(1) and %%DOCSDIR%%/README for more details. - -********************************************************************** +EOM +} +] diff --git a/sysutils/gdisk/pkg-message b/sysutils/gdisk/pkg-message index 739ff4381059..2cdfec886b5a 100644 --- a/sysutils/gdisk/pkg-message +++ b/sysutils/gdisk/pkg-message @@ -1,6 +1,6 @@ -############################################################### -!!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! - +[ +{ type: install + message: <<EOM PLEASE, READ DOCUMENTATION BEFORE USE See `man gdisk' , `man cgdisk', `man sgdisk', `man fixparts'. @@ -9,5 +9,6 @@ Any errors in usage gdisk (cgdisk, sgdisk, fixparts) or not understanding of that you do, can call loss of your data. Make a backup copy of all data of a disk before you use these programs for its processing. - -############################################################### +EOM +} +] diff --git a/sysutils/geomWatch/files/pkg-message.in b/sysutils/geomWatch/files/pkg-message.in index 467d51193c8b..346e572a274c 100644 --- a/sysutils/geomWatch/files/pkg-message.in +++ b/sysutils/geomWatch/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM Before starting geomWatch, you should edit its configuration file, %%PREFIX%%/etc/geomWatch.conf. Then, add the following line to /etc/rc.conf: @@ -11,4 +13,6 @@ Finally, to start it, run the following command: You can also test your SMTP configuration by running the following command: %%PREFIX%%/sbin/geomWatch -t - +EOM +} +] diff --git a/sysutils/getdelta/files/pkg-message.in b/sysutils/getdelta/files/pkg-message.in index 8403e319b8d8..96e451a0eda7 100644 --- a/sysutils/getdelta/files/pkg-message.in +++ b/sysutils/getdelta/files/pkg-message.in @@ -1,8 +1,11 @@ -========================================================================================= -ATTENTION! +[ +{ type: install + message: <<EOM To use Getdelta for upgrading ports you need to add the following string into /etc/make.conf: FETCH_CMD=%%PREFIX%%/bin/getdelta.sh To do this you can simply run the following command: echo "FETCH_CMD=%%PREFIX%%/bin/getdelta.sh" >> /etc/make.conf -========================================================================================= +EOM +} +] diff --git a/sysutils/gkrelltop/pkg-message b/sysutils/gkrelltop/pkg-message index 5d8acb93f443..cbaf87d0fc40 100644 --- a/sysutils/gkrelltop/pkg-message +++ b/sysutils/gkrelltop/pkg-message @@ -1,8 +1,12 @@ -* -* This port requires /proc to be mounted, -* if it is not already please add the following to fstab: -* -* proc /proc procfs rw 0 0 -* -* and mount /proc. -* +[ +{ type: install + message: <<EOM + This port requires /proc to be mounted, + if it is not already please add the following to fstab: + + proc /proc procfs rw 0 0 + + and mount /proc. +EOM +} +] diff --git a/sysutils/goss/pkg-message b/sysutils/goss/pkg-message index a589e5a2571d..7d6dcd5a22f7 100644 --- a/sysutils/goss/pkg-message +++ b/sysutils/goss/pkg-message @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM WARNING: goss is not yet fully functional on FreeBSD. See https://github.com/aelsabbahy/goss/issues/26 for details. +EOM +} +] diff --git a/sysutils/graylog/files/pkg-message.in b/sysutils/graylog/files/pkg-message.in index 34d9075945f7..19d08ac1d41d 100644 --- a/sysutils/graylog/files/pkg-message.in +++ b/sysutils/graylog/files/pkg-message.in @@ -1,5 +1,6 @@ -====================================================================== - +[ +{ type: install + message: <<EOM Please see %%ETCDIR%% for sample versions of graylog.conf, log4j.xml, and and adjust them for your configuration. @@ -17,3 +18,6 @@ And ensure that the elasticsearch cluster name matches that used by graylog. The locations for configuration files have changed to match upstream versions in 3.0 of this port, refer to UPDATING for migration steps. +EOM +} +] diff --git a/sysutils/grub2/pkg-message b/sysutils/grub2/pkg-message index 29a352b80b6e..81092db7f468 100644 --- a/sysutils/grub2/pkg-message +++ b/sysutils/grub2/pkg-message @@ -1,4 +1,6 @@ -############################################################# +[ +{ type: install + message: <<EOM To install GRUB on the master boot record of your hard drive use 'grub-install <drive-to-install>' command. @@ -8,4 +10,6 @@ menuentry "FreeBSD" { kfreebsd /boot/loader } Or use grub-mkconfig to create the config file. -############################################################# +EOM +} +] diff --git a/sysutils/gsh/files/pkg-message.in b/sysutils/gsh/files/pkg-message.in index c2010f23b944..2d7a59873905 100644 --- a/sysutils/gsh/files/pkg-message.in +++ b/sysutils/gsh/files/pkg-message.in @@ -1,4 +1,6 @@ -============================================================ +[ +{ type: install + message: <<EOM To use gsh %%ETCDIR%%/ghosts @@ -6,4 +8,6 @@ To use gsh should be created. Refer to ghosts(1). -============================================================ +EOM +} +] diff --git a/sysutils/healthd/files/pkg-message.in b/sysutils/healthd/files/pkg-message.in index 97c669ec0602..e280d7b21080 100644 --- a/sysutils/healthd/files/pkg-message.in +++ b/sysutils/healthd/files/pkg-message.in @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM It is recommended to edit %%PREFIX%%/etc/healthd.conf so it match the monitored system before running the program. +EOM +} +] diff --git a/sysutils/heartbeat/files/pkg-message.in b/sysutils/heartbeat/files/pkg-message.in index c4758d608e70..e2fd4e86b48c 100644 --- a/sysutils/heartbeat/files/pkg-message.in +++ b/sysutils/heartbeat/files/pkg-message.in @@ -1,12 +1,6 @@ - -# # -## ## -### ### -######################################################## -### ### -## ## -# # - +[ +{ type: install + message: <<EOM CONFIGURATION: - Please read the below site for configuration changes between version 1 and 2. @@ -21,12 +15,6 @@ CAVEATS: - bcast is not available on FreeBSD. - BasicSanityCheck is not available on FreeBSD. - -# # -## ## -### ### -######################################################## -### ### -## ## -# # - +EOM +} +] diff --git a/sysutils/helm/pkg-message b/sysutils/helm/pkg-message index 5195aaa9f0fe..76175cd7e248 100644 --- a/sysutils/helm/pkg-message +++ b/sysutils/helm/pkg-message @@ -1 +1,7 @@ -If you are upgrading, be sure to upgrade Tiller with 'helm init --upgrade'. +[ +{ type: upgrade + message: <<EOM +Be sure to upgrade Tiller with 'helm init --upgrade'. +EOM +} +] diff --git a/sysutils/hfm/pkg-message b/sysutils/hfm/pkg-message index d56d78df9890..075e2e3d7ba4 100644 --- a/sysutils/hfm/pkg-message +++ b/sysutils/hfm/pkg-message @@ -1,5 +1,11 @@ +[ +{ type: install + message: <<EOM hfm includes an rc.d script to control a daemon mode. Use: sysrc hfm_enable=yes to enable. +EOM +} +] diff --git a/sysutils/hilite/pkg-message b/sysutils/hilite/pkg-message index aa01f53f0d7c..403de002904d 100644 --- a/sysutils/hilite/pkg-message +++ b/sysutils/hilite/pkg-message @@ -1,4 +1,6 @@ -=============================================================================== +[ +{ type: install + message: <<EOM You might want to put something like .if defined(HILITE) @@ -7,4 +9,6 @@ CXX= hilite c++ .endif in your /etc/make.conf -=============================================================================== +EOM +} +] diff --git a/sysutils/intel-nvmupdate/pkg-message b/sysutils/intel-nvmupdate/pkg-message index e435dd50c597..a5d27582fc82 100644 --- a/sysutils/intel-nvmupdate/pkg-message +++ b/sysutils/intel-nvmupdate/pkg-message @@ -1,5 +1,6 @@ -=============================================================================== - +[ +{ type: install + message: <<EOM THIS PACKAGE INSTALLS THE NEWER VERSION OF THE SOFTWARE WHICH CAN CAUSE SYSTEM INSTABILITY WHILE USED. USE THE UPDATED VERSION ONLY IF YOU EXPERIENCE PROBLEMS WITH THE PRESENT NVM IMAGE VERSION @@ -23,5 +24,6 @@ Usage: Getting help: # nvmupdate -h - -============================================================================== +EOM +} +] diff --git a/sysutils/intel-qcu/pkg-message b/sysutils/intel-qcu/pkg-message index 808f88a27e60..b278501d7f2c 100644 --- a/sysutils/intel-qcu/pkg-message +++ b/sysutils/intel-qcu/pkg-message @@ -1,9 +1,11 @@ -=============================================================================== - +[ +{ type: install + message: <<EOM For the package to function properly please make sure you have latest ixl driver installed. If necessary - install the updated version from net/intel-ixl-kmod Getting help: # qcu /? - -============================================================================== +EOM +} +] diff --git a/sysutils/ipad_charge/files/pkg-message.in b/sysutils/ipad_charge/files/pkg-message.in index 2d6b51f67973..11519f61ceaf 100644 --- a/sysutils/ipad_charge/files/pkg-message.in +++ b/sysutils/ipad_charge/files/pkg-message.in @@ -1,4 +1,6 @@ -********************************************************************* +[ +{ type: install + message: <<EOM 1) add ipad_charge_enable="YES" and optionally ipad_charge_action="ON" (default) or "OFF" . @@ -7,5 +9,6 @@ to your /etc/rc.conf 2) Please restart devd as the configuration changed # service devd restart - -********************************************************************* +EOM +} +] diff --git a/sysutils/isc-cron/files/pkg-message.in b/sysutils/isc-cron/files/pkg-message.in index e837c2b50c48..2a945cbb21a6 100644 --- a/sysutils/isc-cron/files/pkg-message.in +++ b/sysutils/isc-cron/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Please add cron_program="%%PREFIX%%/sbin/cron" @@ -6,3 +9,6 @@ to your /etc/rc.conf to enable the ISC cron instead of the base Vixie cron. Please use %%PREFIX%%/bin/crontab to edit the users crontab. +EOM +} +] diff --git a/sysutils/istatserver/files/pkg-message.in b/sysutils/istatserver/files/pkg-message.in index f181f859262e..e2600e7bb77e 100644 --- a/sysutils/istatserver/files/pkg-message.in +++ b/sysutils/istatserver/files/pkg-message.in @@ -1,7 +1,9 @@ -================================================================================ - +[ +{ type: install + message: <<EOM %%PREFIX%%/etc/istatserver/istatserver.conf is the daemon's configuration file. Please edit the "server_code" framework with a unique numeric code for your server. - -================================================================================ +EOM +} +] diff --git a/sysutils/jail-primer/pkg-message b/sysutils/jail-primer/pkg-message index 09beaf7bfa12..6f9bc050a2c3 100644 --- a/sysutils/jail-primer/pkg-message +++ b/sysutils/jail-primer/pkg-message @@ -1,10 +1,8 @@ -# -# - +[ +{ type: install + message: <<EOM First issue "rehash" command to enable the jail-primer scripts (if using csh). Then issue "man jail-primer" to read about jail-primer usage. - -Note: Be sure you are at 10.0-RELEASE-p2 - -# -# +EOM +} +] diff --git a/sysutils/jstest-gtk/pkg-message b/sysutils/jstest-gtk/pkg-message index ed441254b284..810d2216e331 100644 --- a/sysutils/jstest-gtk/pkg-message +++ b/sysutils/jstest-gtk/pkg-message @@ -1,7 +1,8 @@ - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - +[ +{ type: install + message: <<EOM Do not forget install webcamd with joystick support and run it, /dev/input/js* device is required. - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +EOM +} +] diff --git a/sysutils/k3b/pkg-message b/sysutils/k3b/pkg-message index ebce8911437d..1c59ae898ea7 100644 --- a/sysutils/k3b/pkg-message +++ b/sysutils/k3b/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM 1. The FreeBSD k3b port supports SCSI drives only. If you have IDE CD or DVD drives, use them through the cam system. See Chapter 17.5.1 of the handbook (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html) @@ -39,4 +42,6 @@ a. Either use the (default) HAL backend, and enable HAL in /etc/rc.conf via # sysrc hald_enable="YES" b. *or* use the (experimental) BSDISKS backend. - +EOM +} +] diff --git a/sysutils/lcdproc/files/pkg-message.in b/sysutils/lcdproc/files/pkg-message.in index a347d773dc65..f5c105b1a22b 100644 --- a/sysutils/lcdproc/files/pkg-message.in +++ b/sysutils/lcdproc/files/pkg-message.in @@ -1,8 +1,12 @@ -============================================================== +[ +{ type: install + message: <<EOM The default configuration files have been installed as %%PREFIX%%/etc/LCDd.conf.sample %%PREFIX%%/etc/lcdproc.conf.sample %%PREFIX%%/etc/lcdexec.conf.sample Copy and edit them as needed. -============================================================== +EOM +} +] diff --git a/sysutils/linux-crashplan/pkg-message b/sysutils/linux-crashplan/pkg-message index bab3ee9879e4..137dfe1d8f79 100644 --- a/sysutils/linux-crashplan/pkg-message +++ b/sysutils/linux-crashplan/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM For users upgrading from previous versions of CrashPlan, note that the headless mode configuration has been changed significantly and older clients will no longer connect. Please check the Code42 website for up to date instructions on @@ -5,3 +8,6 @@ setting up a headless CrashPlan server. On FreeBSD, the authentication token file can be found in /compat/linux/var/lib/CrashPlan/.ui_info +EOM +} +] diff --git a/sysutils/lmon/pkg-message b/sysutils/lmon/pkg-message index 0e41e32b3086..5827edfca7f8 100644 --- a/sysutils/lmon/pkg-message +++ b/sysutils/lmon/pkg-message @@ -1,7 +1,9 @@ -================================================================================ - +[ +{ type: install + message: <<EOM LMon is now installed in /usr/local/lmon. You need to create configuration and rulesets. See documentation under /usr/local/share/doc/lmon and examples under /usr/local/share/examples/lmon. - -================================================================================ +EOM +} +] diff --git a/sysutils/log-courier/files/pkg-message.in b/sysutils/log-courier/files/pkg-message.in index 4cf27894e619..e450c91b0eca 100644 --- a/sysutils/log-courier/files/pkg-message.in +++ b/sysutils/log-courier/files/pkg-message.in @@ -1,4 +1,6 @@ -========================================================================= +[ +{ type: install + message: <<EOM If you want to run log-courier, add to /etc/rc.conf log_courier_enable="YES" @@ -6,4 +8,6 @@ If you want to run log-courier, add to /etc/rc.conf Do not forget to edit your configuration file: Default: ${PREFIX}/etc/log-courier.conf -========================================================================= +EOM +} +] diff --git a/sysutils/logstash-forwarder/files/pkg-message.in b/sysutils/logstash-forwarder/files/pkg-message.in index cc32aa0a2f10..4912585315e8 100644 --- a/sysutils/logstash-forwarder/files/pkg-message.in +++ b/sysutils/logstash-forwarder/files/pkg-message.in @@ -1,4 +1,6 @@ -========================================================================= +[ +{ type: install + message: <<EOM If you want to run logstash-forwarder, add to /etc/rc.conf logstash_forwarder_enable="YES" @@ -28,4 +30,6 @@ logstash-forwarder as well as the logstash instances receiving logs will require these files on disk to verify the authenticity of messages. PROTECT YOUR KEYS! -========================================================================= +EOM +} +] diff --git a/sysutils/logstash5/pkg-message b/sysutils/logstash5/pkg-message index 4add4e93a4c7..99c33f7ab57f 100644 --- a/sysutils/logstash5/pkg-message +++ b/sysutils/logstash5/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To start logstash as an agent during startup, add logstash_enable="YES" @@ -12,3 +15,6 @@ distribution. NOTE: Since version 2, logstash does not support an embedded ElasticSearch instance. +EOM +} +] diff --git a/sysutils/logstash6/pkg-message b/sysutils/logstash6/pkg-message index 5bdbbef04281..e3329624980a 100644 --- a/sysutils/logstash6/pkg-message +++ b/sysutils/logstash6/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To start logstash as an agent during startup, add logstash_enable="YES" @@ -5,3 +8,6 @@ To start logstash as an agent during startup, add to your /etc/rc.conf. Extra options can be found in startup script. +EOM +} +] diff --git a/sysutils/logtool/pkg-message b/sysutils/logtool/pkg-message index 9f37310c2a0a..cb54f27bcfce 100644 --- a/sysutils/logtool/pkg-message +++ b/sysutils/logtool/pkg-message @@ -1,9 +1,11 @@ -########################################################################### -# -# Sample configuration files are installed in -# -# PREFIX/share/examples/logtool -# -# Please copy them to PREFIX/etc/logtool and edit to suit your needs. -# -########################################################################### +[ +{ type: install + message: <<EOM + Sample configuration files are installed in + + PREFIX/share/examples/logtool + + Please copy them to PREFIX/etc/logtool and edit to suit your needs. +EOM +} +] diff --git a/sysutils/ltfs/pkg-message b/sysutils/ltfs/pkg-message index dc5227b9a931..e8afac043d3d 100644 --- a/sysutils/ltfs/pkg-message +++ b/sysutils/ltfs/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM This only works with IBM-branded LTO-5 or newer tape drives, although there is a file backend for simulation purposes. @@ -7,3 +10,6 @@ recompile/reinstall to allow reading and writing tapes up to the maximum LTFS blocksize of 1MB: options MAXPHYS=(1024*1056) +EOM +} +] diff --git a/sysutils/lxtask/pkg-message b/sysutils/lxtask/pkg-message index 8be9eb26e2f0..62d6968c7190 100644 --- a/sysutils/lxtask/pkg-message +++ b/sysutils/lxtask/pkg-message @@ -1,5 +1,6 @@ -################################################################################ - +[ +{ type: install + message: <<EOM This program will attempt to obtain some system information by accessing files in linprocfs. You must mount linprocfs filesystem for this to work correctly. This can be accomplished by adding the following line to your /etc/fstab file: @@ -10,5 +11,6 @@ linprocfs /compat/linux/proc linprocfs rw 0 and then, as root, executing the command: mount linprocfs - -################################################################################ +EOM +} +] diff --git a/sysutils/mcelog/pkg-message b/sysutils/mcelog/pkg-message index 35c5d5d52aa1..7ace6791d7d9 100644 --- a/sysutils/mcelog/pkg-message +++ b/sysutils/mcelog/pkg-message @@ -1,4 +1,6 @@ -====================================================== +[ +{ type: install + message: <<EOM You can decode MCE output from the FreeBSD kernel by using the following command: @@ -8,5 +10,6 @@ Or if you wish to paste the MCE via stdin: mcelog --no-dmi --ascii {...paste MCE and send EOF/press Ctrl-D...} - -====================================================== +EOM +} +] diff --git a/sysutils/mcollective-actionpolicy-auth/files/pkg-message.in b/sysutils/mcollective-actionpolicy-auth/files/pkg-message.in index 46351464a02b..fdd8847e011d 100644 --- a/sysutils/mcollective-actionpolicy-auth/files/pkg-message.in +++ b/sysutils/mcollective-actionpolicy-auth/files/pkg-message.in @@ -1,7 +1,11 @@ -************************************************************************ +[ +{ type: install + message: <<EOM Add the following lines to %%PREFIX%%/etc/mcollective/server.cfg to enable the mcollective-actionpolicy-auth plugin: rpcauthorization = 1 rpcauthprovider = action_policy -************************************************************************ +EOM +} +] diff --git a/sysutils/mcweject/files/pkg-message.in b/sysutils/mcweject/files/pkg-message.in index bba35f963ae1..f77f6e740400 100644 --- a/sysutils/mcweject/files/pkg-message.in +++ b/sysutils/mcweject/files/pkg-message.in @@ -1,6 +1,10 @@ -======================================================================== +[ +{ type: install + message: <<EOM The file eject.allow has been installed in %%PREFIX%%/share/examples/. Copy this file to %%PREFIX%%/etc/eject.allow, and edit to reflect the devices you wish to be ejectable. -======================================================================== +EOM +} +] diff --git a/sysutils/memfetch/pkg-message b/sysutils/memfetch/pkg-message index e69b5f0b1d85..d85a28ddc413 100644 --- a/sysutils/memfetch/pkg-message +++ b/sysutils/memfetch/pkg-message @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM This port requires procfs(5) filesystem mounted under /proc. Please note that this can pose a security risk. +EOM +} +] diff --git a/sysutils/memtest86+/files/pkg-message.in b/sysutils/memtest86+/files/pkg-message.in index 06a329da8fc3..bc75e15330c2 100644 --- a/sysutils/memtest86+/files/pkg-message.in +++ b/sysutils/memtest86+/files/pkg-message.in @@ -1,4 +1,6 @@ -======================================================================== +[ +{ type: install + message: <<EOM This port has installed ELF image of memtest86+ to %%BOOT_DIR%%/memtest86+. You can load it from from boot prompt by interrupting boot process and entering @@ -16,4 +18,6 @@ it and entering the following commands: boot As already advised, see loader(8) for details. -======================================================================== +EOM +} +] diff --git a/sysutils/memtest86/files/pkg-message.in b/sysutils/memtest86/files/pkg-message.in index 47f40c82338a..cc084157f4bb 100644 --- a/sysutils/memtest86/files/pkg-message.in +++ b/sysutils/memtest86/files/pkg-message.in @@ -1,19 +1,23 @@ -* -* Usage: -* -* USB: -* 1) Insert memstick -* 2) dd if=%%DATADIR%%/memtest86-usb.img \ - of=/dev/daN bs=1m conv=sync -* 3) Boot the memstick -* -* CD-ROM: -* 1) Insert blank cd-rom -* 2) cdrecord dev=<device> %%DATADIR%%/memtest86-cdrom.iso -* 3) Boot the memstick -* -* FLOPPY: -* 1) Insert blank floppy -* 2) dd if=%%DATADIR%%/memtest86-floppy.img of=/dev/fd0 -* 3) Boot the floppy -* +[ +{ type: install + message: <<EOM + Usage: + + USB: + 1) Insert memstick + 2) dd if=%%DATADIR%%/memtest86-usb.img \ + of=/dev/daN bs=1m conv=sync + 3) Boot the memstick + + CD-ROM: + 1) Insert blank cd-rom + 2) cdrecord dev=<device> %%DATADIR%%/memtest86-cdrom.iso + 3) Boot the memstick + + FLOPPY: + 1) Insert blank floppy + 2) dd if=%%DATADIR%%/memtest86-floppy.img of=/dev/fd0 + 3) Boot the floppy +EOM +} +] diff --git a/sysutils/mfid/pkg-message b/sysutils/mfid/pkg-message index d7f2439e3f79..a65f64d0b117 100644 --- a/sysutils/mfid/pkg-message +++ b/sysutils/mfid/pkg-message @@ -1,33 +1,35 @@ -! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! -! ! -! Please note that a previous version of mfid disabled the RAID ! -! controller's Patrol Reads. The original mfid implementation was ! -! used in a high performance environment without the need for the ! -! data safety and integrity features that Patrol Reads provide. ! -! ! -! If you value data safety and integrity over performance, ! -! you should re-enable Patrol Reads. ! -! ! -! Check if patrol is disabled: ! -! ! -! # /usr/sbin/mfiutil -u 0 show patrol ! -! Operation Mode: disabled ! -! Runs Completed: 0 ! -! Current State: stopped ! -! ! -! ! -! Turn patrol back on: ! -! ! -! # /usr/sbin/mfiutil -u 0 patrol auto ! -! ! -! ! -! Confirm patrol status: ! -! ! -! # /usr/sbin/mfiutil -u 0 show patrol ! -! Operation Mode: auto ! -! Next Run Starts: Sat Apr 30 02:58:41 2016 ! -! Runs Start Every 604800 seconds ! -! Runs Completed: 0 ! -! Current State: stopped ! -! ! -! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! +[ +{ type: install + message: <<EOM + Please note that a previous version of mfid disabled the RAID + controller's Patrol Reads. The original mfid implementation was + used in a high performance environment without the need for the + data safety and integrity features that Patrol Reads provide. + + If you value data safety and integrity over performance, + you should re-enable Patrol Reads. + + Check if patrol is disabled: + + # /usr/sbin/mfiutil -u 0 show patrol + Operation Mode: disabled + Runs Completed: 0 + Current State: stopped + + + Turn patrol back on: + + # /usr/sbin/mfiutil -u 0 patrol auto + + + Confirm patrol status: + + # /usr/sbin/mfiutil -u 0 show patrol + Operation Mode: auto + Next Run Starts: Sat Apr 30 02:58:41 2016 + Runs Start Every 604800 seconds + Runs Completed: 0 + Current State: stopped +EOM +} +] diff --git a/sysutils/mgeupsd/files/pkg-message.in b/sysutils/mgeupsd/files/pkg-message.in index cb1d3f3f0bb2..65e76ff30e7c 100644 --- a/sysutils/mgeupsd/files/pkg-message.in +++ b/sysutils/mgeupsd/files/pkg-message.in @@ -1,6 +1,12 @@ +[ +{ type: install + message: <<EOM A configuration file has been installed in %%PREFIX%%/etc/rc.d/mgeupsd.sh. Examine it to make sure it is suitable for your system. A sample script that handles the various power messages has been placed in %%PREFIX%%/sbin/powerhandler. You will probably want to edit it to suit your particular needs. +EOM +} +] diff --git a/sysutils/minikube/files/pkg-message.in b/sysutils/minikube/files/pkg-message.in index 9ff84489fff6..6279810364b1 100644 --- a/sysutils/minikube/files/pkg-message.in +++ b/sysutils/minikube/files/pkg-message.in @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM To use Minikube you need to install emulators/virtualbox-ose or emulators/virtualbox-ose-nox11. Just VirtualBox is supported on FreeBSD (--vm-driver=virtualbox). +EOM +} +] diff --git a/sysutils/minimunin/files/pkg-message.in b/sysutils/minimunin/files/pkg-message.in index a9ab3440e93e..f04d052524da 100644 --- a/sysutils/minimunin/files/pkg-message.in +++ b/sysutils/minimunin/files/pkg-message.in @@ -1,4 +1,6 @@ -***************************************************************** +[ +{ type: install + message: <<EOM To activate minimunin, add the line munin stream tcp nowait nobody /usr/libexec/tcpd %%PREFIX%%/bin/minimunin @@ -19,5 +21,6 @@ in your /etc/rc.conf and restart inetd with the command. You may also want to restrict access to your munin node via the /etc/hosts.allow and /etc/hosts.deny configuration files. - -***************************************************************** +EOM +} +] diff --git a/sysutils/monit/files/pkg-message.in b/sysutils/monit/files/pkg-message.in index 87525937c7bb..93305049e389 100644 --- a/sysutils/monit/files/pkg-message.in +++ b/sysutils/monit/files/pkg-message.in @@ -1,5 +1,6 @@ -************************************************************************** - +[ +{ type: install + message: <<EOM USAGE: To enable monit you need to add monit_enable="YES" to rc.conf file. @@ -7,5 +8,6 @@ Before running monit you have to configure monitrc file. There is example configuration file monitrc.sample. %%PREFIX%%/etc/monitrc.sample - -************************************************************************** +EOM +} +] diff --git a/sysutils/monitord/pkg-message b/sysutils/monitord/pkg-message index f22635ee9c2a..116aab6fe682 100644 --- a/sysutils/monitord/pkg-message +++ b/sysutils/monitord/pkg-message @@ -1,4 +1,8 @@ -============================================================= +[ +{ type: install + message: <<EOM Monitord requires procfs(5). Add this line to your fstab(5): proc /proc procfs rw 0 0 -============================================================= +EOM +} +] diff --git a/sysutils/monitorix/files/pkg-message.in b/sysutils/monitorix/files/pkg-message.in index ba86895649f5..46ff558bba97 100644 --- a/sysutils/monitorix/files/pkg-message.in +++ b/sysutils/monitorix/files/pkg-message.in @@ -1,5 +1,6 @@ -================================================================ - +[ +{ type: install + message: <<EOM The port has a generic default config, please adjust your settings in file: %%PREFIX%%/etc/monitorix.conf @@ -12,5 +13,6 @@ %%PREFIX%%/etc/monitorix.conf and have a look at the new configuration file options. - -================================================================ +EOM +} +] diff --git a/sysutils/mono-kmod/files/pkg-message.in b/sysutils/mono-kmod/files/pkg-message.in index 2c3edd7ac331..fc370e642bd3 100644 --- a/sysutils/mono-kmod/files/pkg-message.in +++ b/sysutils/mono-kmod/files/pkg-message.in @@ -1,5 +1,6 @@ -############################################################################ - +[ +{ type: install + message: <<EOM Add mono_load="YES" to /boot/loader.conf to load the kernel module automatically. @@ -7,5 +8,6 @@ The default path of Mono is %%LOCALBASE%%/bin/mono. You can specify an alternate path by adding a line to /etc/sysctl.conf: kern.mono.path=/path/to/mono - -############################################################################ +EOM +} +] diff --git a/sysutils/moosefs2-master/files/pkg-message-cgiserv.in b/sysutils/moosefs2-master/files/pkg-message-cgiserv.in index fd0285475f85..b93e90eb8847 100644 --- a/sysutils/moosefs2-master/files/pkg-message-cgiserv.in +++ b/sysutils/moosefs2-master/files/pkg-message-cgiserv.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfscgiserv @@ -8,5 +9,6 @@ Use it to start/stop the mfscgiserv service after you have added the following line to your rc.conf file: mfscgiserv_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs2-master/files/pkg-message-chunkserver.in b/sysutils/moosefs2-master/files/pkg-message-chunkserver.in index 6d3bc8159647..5ad0ee1a4388 100644 --- a/sysutils/moosefs2-master/files/pkg-message-chunkserver.in +++ b/sysutils/moosefs2-master/files/pkg-message-chunkserver.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfschunkserver @@ -8,5 +9,6 @@ Use it to start/stop the mfschunkserver service after you have added the following line to your rc.conf file: mfschunkserver_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs2-master/files/pkg-message-master.in b/sysutils/moosefs2-master/files/pkg-message-master.in index 4cbf687c6f33..748bcc9eee7a 100644 --- a/sysutils/moosefs2-master/files/pkg-message-master.in +++ b/sysutils/moosefs2-master/files/pkg-message-master.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfsmaster @@ -8,5 +9,6 @@ Use it to start/stop the mfsmaster service after you have added the following line to your rc.conf file: mfsmaster_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs2-master/files/pkg-message-metalogger.in b/sysutils/moosefs2-master/files/pkg-message-metalogger.in index af42c5fdd3a9..0a294c00bc0c 100644 --- a/sysutils/moosefs2-master/files/pkg-message-metalogger.in +++ b/sysutils/moosefs2-master/files/pkg-message-metalogger.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfsmetalogger @@ -8,5 +9,6 @@ Use it to start/stop the mfsmetalogger service after you have added the following line to your rc.conf file: mfsmetalogger_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs3-master/files/pkg-message-cgiserv.in b/sysutils/moosefs3-master/files/pkg-message-cgiserv.in index fd0285475f85..b93e90eb8847 100644 --- a/sysutils/moosefs3-master/files/pkg-message-cgiserv.in +++ b/sysutils/moosefs3-master/files/pkg-message-cgiserv.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfscgiserv @@ -8,5 +9,6 @@ Use it to start/stop the mfscgiserv service after you have added the following line to your rc.conf file: mfscgiserv_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs3-master/files/pkg-message-chunkserver.in b/sysutils/moosefs3-master/files/pkg-message-chunkserver.in index 6d3bc8159647..5ad0ee1a4388 100644 --- a/sysutils/moosefs3-master/files/pkg-message-chunkserver.in +++ b/sysutils/moosefs3-master/files/pkg-message-chunkserver.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfschunkserver @@ -8,5 +9,6 @@ Use it to start/stop the mfschunkserver service after you have added the following line to your rc.conf file: mfschunkserver_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs3-master/files/pkg-message-master.in b/sysutils/moosefs3-master/files/pkg-message-master.in index 4cbf687c6f33..748bcc9eee7a 100644 --- a/sysutils/moosefs3-master/files/pkg-message-master.in +++ b/sysutils/moosefs3-master/files/pkg-message-master.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfsmaster @@ -8,5 +9,6 @@ Use it to start/stop the mfsmaster service after you have added the following line to your rc.conf file: mfsmaster_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/moosefs3-master/files/pkg-message-metalogger.in b/sysutils/moosefs3-master/files/pkg-message-metalogger.in index af42c5fdd3a9..0a294c00bc0c 100644 --- a/sysutils/moosefs3-master/files/pkg-message-metalogger.in +++ b/sysutils/moosefs3-master/files/pkg-message-metalogger.in @@ -1,5 +1,6 @@ -************************************************************************ - +[ +{ type: install + message: <<EOM A startup script has been installed as: %%PREFIX%%/etc/rc.d/mfsmetalogger @@ -8,5 +9,6 @@ Use it to start/stop the mfsmetalogger service after you have added the following line to your rc.conf file: mfsmetalogger_enable="YES" - -************************************************************************ +EOM +} +] diff --git a/sysutils/mountsmb2/files/pkg-message.in b/sysutils/mountsmb2/files/pkg-message.in index b7720dddcd5c..7dc733091dcc 100644 --- a/sysutils/mountsmb2/files/pkg-message.in +++ b/sysutils/mountsmb2/files/pkg-message.in @@ -1,5 +1,6 @@ -*********************************************************** - +[ +{ type: install + message: <<EOM Please, read %%EXAMPLESDIR%%/README.FreeBSD *B*E*F*O*R*E* the FIRST RUN of Mountsmb2! @@ -18,5 +19,6 @@ Keep in mind, that: 1. Mountsmb2 only calls mount_smbfs to mount shares with params, described in a .mssmbrc file 2. DO NOT DISTURB ME ABOUT FreeBSD's SMB IMPLEMENTATION! - -************************************************************ +EOM +} +] diff --git a/sysutils/msiklm/files/pkg-message.in b/sysutils/msiklm/files/pkg-message.in index 3af659c5c1b4..fa82c739a80e 100644 --- a/sysutils/msiklm/files/pkg-message.in +++ b/sysutils/msiklm/files/pkg-message.in @@ -1,5 +1,6 @@ ------------------------------------------------------------------------ - +[ +{ type: install + message: <<EOM A sample devd(8) configuration file has been installed as: %%PREFIX%%/etc/devd/msiklm.conf.sample @@ -7,5 +8,6 @@ %%PREFIX%%/etc/devd/msiklm.conf and configure it to your liking if you want msiklm to automatically set your keyboard backlight to a default upon system boot/resume. - ------------------------------------------------------------------------ +EOM +} +] diff --git a/sysutils/msyslog/files/pkg-message.in b/sysutils/msyslog/files/pkg-message.in index 9d5c3552bf8b..be1fdf32a38c 100644 --- a/sysutils/msyslog/files/pkg-message.in +++ b/sysutils/msyslog/files/pkg-message.in @@ -1,4 +1,6 @@ -================================================================================ +[ +{ type: install + message: <<EOM To replace FreeBSD's standard syslogd with msyslog, do this: 1) Create a configuration in %%PREFIX%%/etc/syslog.conf. @@ -17,4 +19,6 @@ To replace FreeBSD's standard syslogd with msyslog, do this: in the end of /etc/rc.conf: syslogd_enable="NO" -================================================================================ +EOM +} +] diff --git a/sysutils/node_exporter/pkg-message b/sysutils/node_exporter/pkg-message index c8e780f97b2a..a46508a954f3 100644 --- a/sysutils/node_exporter/pkg-message +++ b/sysutils/node_exporter/pkg-message @@ -1,6 +1,12 @@ +[ +{ type: install + message: <<EOM If upgrading from a version of node_exporter <0.15.0 you'll need to update any custom command line flags that you may have set as it now requires a double-dash (--flag) instead of a single dash (-flag). The collector flags in 0.15.0 have now been replaced with individual boolean flags and the -collector.procfs` and -collector.sysfs` flags have been renamed to --path.procfs and --path.sysfs respectively. +EOM +} +] diff --git a/sysutils/omnibackup/files/pkg-message.in b/sysutils/omnibackup/files/pkg-message.in index 0e0c12004b64..d126f7b189a2 100644 --- a/sysutils/omnibackup/files/pkg-message.in +++ b/sysutils/omnibackup/files/pkg-message.in @@ -1,5 +1,6 @@ -############################################################################### - +[ +{ type: install + message: <<EOM In order to run OmniBackup, you will need to create and configure the main configuration file, e.g.: @@ -28,5 +29,6 @@ or * https://github.com/NuLL3rr0r/omnibackup Before you use it in production. - -############################################################################### +EOM +} +] diff --git a/sysutils/open/files/pkg-message.in b/sysutils/open/files/pkg-message.in index f3ce36747f4f..95a25e9e5eb2 100644 --- a/sysutils/open/files/pkg-message.in +++ b/sysutils/open/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To use open it must be installed setuid root (type "chmod u+s %%PREFIX%%/bin/open") @@ -7,3 +10,6 @@ all the VT devices that are not allocated to getty should be read/write by all, e.g. chmod a=rw /dev/ttyv[9abc] +EOM +} +] diff --git a/sysutils/osquery/pkg-message b/sysutils/osquery/pkg-message index d4f98c1e0ec5..36e02fc756f4 100644 --- a/sysutils/osquery/pkg-message +++ b/sysutils/osquery/pkg-message @@ -1,4 +1,10 @@ +[ +{ type: install + message: <<EOM Note that some osquery tables are currently unsupported on FreeBSD. A list of disabled tables can be found at: https://github.com/facebook/osquery/blob/master/specs/blacklist +EOM +} +] diff --git a/sysutils/p5-Ubic/pkg-message b/sysutils/p5-Ubic/pkg-message index 85f58e2685af..6ab975d240e3 100644 --- a/sysutils/p5-Ubic/pkg-message +++ b/sysutils/p5-Ubic/pkg-message @@ -1,6 +1,8 @@ -******************************************* - +[ +{ type: install + message: <<EOM Ubic has been installed! To config and run Ubic use: ubic-admin setup - -******************************************** +EOM +} +] diff --git a/sysutils/pacman/files/pkg-message.in b/sysutils/pacman/files/pkg-message.in index 12e67c71134e..73494fa72d84 100644 --- a/sysutils/pacman/files/pkg-message.in +++ b/sysutils/pacman/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Default pacman root directory (the one it will install packages into) is %%PACMAN_ROOT%% @@ -5,4 +8,6 @@ Default pacman root directory (the one it will install packages into) is To change it (and to define package repositories to use), see %%PREFIX%%/etc/pacman.conf - +EOM +} +] diff --git a/sysutils/paladin/pkg-message b/sysutils/paladin/pkg-message index 6746cc640917..fd7730021238 100644 --- a/sysutils/paladin/pkg-message +++ b/sysutils/paladin/pkg-message @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM To run paladin: - Edit /usr/local/etc/paladin.conf - Add paladin_enable="YES" to /etc/rc.conf +EOM +} +] diff --git a/sysutils/panicmail/pkg-message b/sysutils/panicmail/pkg-message index c243a00cad13..f57cb45bc9af 100644 --- a/sysutils/panicmail/pkg-message +++ b/sysutils/panicmail/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To enable sending of panic reports, add dumpdev="AUTO" panicmail_enable="YES" @@ -8,3 +11,6 @@ them if they do not contain any sensitive information. To automatically submit panic reports directly, add panicmail_autosubmit="YES" to your /etc/rc.conf in addition. +EOM +} +] diff --git a/sysutils/personality/files/pkg-message.in b/sysutils/personality/files/pkg-message.in index c0112ac702e1..419e40ca9a0a 100644 --- a/sysutils/personality/files/pkg-message.in +++ b/sysutils/personality/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To change the personality of your system at system boot you have to add the following line into the /etc/rc script. @@ -6,3 +9,6 @@ you have to add the following line into the /etc/rc script. Make sure that you add this after mounting of the ufs filesystems. If you prefer you can use other values than 60 seconds. After 60 seconds the system boots with the last configuration. +EOM +} +] diff --git a/sysutils/pot/files/pkg-message.in b/sysutils/pot/files/pkg-message.in index 91c26ae2f09f..953d0a52e494 100644 --- a/sysutils/pot/files/pkg-message.in +++ b/sysutils/pot/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Now, before to run 'pot init', it would be wise to edit the configuration file Do not edit pot.default.conf, but pot.conf instead. @@ -11,3 +14,6 @@ To upgrade from prevoius versions of pot (<0.6.0) to 0.6.0+ the following steps The variable `pot_list` in the rc.conf file is deprecated. Use `pot set-attr` to enable the attribute start-at-boot to your pot +EOM +} +] diff --git a/sysutils/powerdxx/pkg-message b/sysutils/powerdxx/pkg-message index 695634a1b13b..a080f193128b 100644 --- a/sysutils/powerdxx/pkg-message +++ b/sysutils/powerdxx/pkg-message @@ -1,9 +1,11 @@ -********************************************************************* - +[ +{ type: install + message: <<EOM To run this service from startup, run sysrc powerdxx_enable="YES" Command line arguments can be set via powerdxx_flags. See powerd++(8) - -********************************************************************* +EOM +} +] diff --git a/sysutils/puppet-mode.el/pkg-message b/sysutils/puppet-mode.el/pkg-message index 50fedfb455a3..55ddc94ad95d 100644 --- a/sysutils/puppet-mode.el/pkg-message +++ b/sysutils/puppet-mode.el/pkg-message @@ -1,5 +1,6 @@ -=================================================== - +[ +{ type: install + message: <<EOM You should add the following line to your ~/.emacs: ;; @@ -8,5 +9,6 @@ You should add the following line to your ~/.emacs: (autoload 'puppet-mode "puppet-mode" "Major mode for editing puppet manifests") (add-to-list 'auto-mode-alist '("\\.pp$" . puppet-mode)) - -=================================================== +EOM +} +] diff --git a/sysutils/puppet5/files/pkg-message.in b/sysutils/puppet5/files/pkg-message.in index d036be0a93e0..b7f42c483592 100644 --- a/sysutils/puppet5/files/pkg-message.in +++ b/sysutils/puppet5/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM To enable the puppet agent, add the following to /etc/rc.conf: puppet_enable="YES" @@ -11,4 +13,6 @@ Individual config files such as %%PREFIX%%/etc/puppetmasterd.conf are deprecated. Use a single file, %%ETCDIR%%/puppet.conf. The default PID directory is /var/run/puppet - +EOM +} +] diff --git a/sysutils/puppet6/files/pkg-message.in b/sysutils/puppet6/files/pkg-message.in index 9c18b68be5b4..caa220715594 100644 --- a/sysutils/puppet6/files/pkg-message.in +++ b/sysutils/puppet6/files/pkg-message.in @@ -1,7 +1,11 @@ - +[ +{ type: install + message: <<EOM To enable the puppet agent, add the following to /etc/rc.conf: puppet_enable="YES" The default PID directory is /var/run/puppet - +EOM +} +] diff --git a/sysutils/puppetserver5/files/pkg-message.in b/sysutils/puppetserver5/files/pkg-message.in index 4c4aad47b360..0635f9786fce 100644 --- a/sysutils/puppetserver5/files/pkg-message.in +++ b/sysutils/puppetserver5/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Remember to run: sysrc puppetserver_enable=yes @@ -9,4 +12,6 @@ https://docs.puppet.com/puppetserver/latest/release_notes.html#puppet-server-25 The file bootstrap.cfg has been removed and ca configuration has been moved out to its own file in ca.cfg. - +EOM +} +] diff --git a/sysutils/puppetserver6/files/pkg-message.in b/sysutils/puppetserver6/files/pkg-message.in index 4d5a91679e60..0635f9786fce 100644 --- a/sysutils/puppetserver6/files/pkg-message.in +++ b/sysutils/puppetserver6/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Remember to run: sysrc puppetserver_enable=yes @@ -9,3 +12,6 @@ https://docs.puppet.com/puppetserver/latest/release_notes.html#puppet-server-25 The file bootstrap.cfg has been removed and ca configuration has been moved out to its own file in ca.cfg. +EOM +} +] diff --git a/sysutils/py-google-compute-engine/pkg-message b/sysutils/py-google-compute-engine/pkg-message index 28b6cc0c763d..cc1a929304d1 100644 --- a/sysutils/py-google-compute-engine/pkg-message +++ b/sysutils/py-google-compute-engine/pkg-message @@ -1,6 +1,6 @@ - -============================================================================== - +[ +{ type: install + message: <<EOM google-compute-engine has been installed, and the following services are available: @@ -17,5 +17,6 @@ google_startup Implement support for running host provided To enable the above services, sysrc <servicename>_enable=YES Reboot your system or start the services, service <servicename> start - -============================================================================== +EOM +} +] diff --git a/sysutils/py-halite/files/pkg-message.in b/sysutils/py-halite/files/pkg-message.in index ff6583c4ecce..1ec4056726fb 100644 --- a/sysutils/py-halite/files/pkg-message.in +++ b/sysutils/py-halite/files/pkg-message.in @@ -1,6 +1,6 @@ -====================================================== -Halite Configuration Instructions -====================================================== +[ +{ type: install + message: <<EOM step 1: modify external_auth params in master config repeat username for each user allowed access @@ -26,4 +26,6 @@ halite: step 3: restart salt_master daemon step 4: point browser to https://saltmaster:8080 -====================================================== +EOM +} +] diff --git a/sysutils/py-mitogen/files/pkg-message.in b/sysutils/py-mitogen/files/pkg-message.in index eef820123a64..0ff7c8f10d61 100644 --- a/sysutils/py-mitogen/files/pkg-message.in +++ b/sysutils/py-mitogen/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM If you are intending to use mitogen together with [sysutils/ansible] then simply append this into your ansible.cfg file, whether in /etc or in the root directory of your ansible playbook: @@ -5,3 +8,6 @@ or in the root directory of your ansible playbook: [defaults] strategy = mitogen_linear strategy_plugins = %%PYTHON_SITELIBDIR%%/ansible_mitogen/plugins/strategy +EOM +} +] diff --git a/sysutils/py-mqttwarn/files/pkg-message.in b/sysutils/py-mqttwarn/files/pkg-message.in index d3df2e371f1d..54c0014467d1 100644 --- a/sysutils/py-mqttwarn/files/pkg-message.in +++ b/sysutils/py-mqttwarn/files/pkg-message.in @@ -1,6 +1,6 @@ - -* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - +[ +{ type: install + message: <<EOM After installing mqttwarn for the first time, we recommend making the following change to supervisord configuration settings: @@ -29,5 +29,6 @@ environment=MQTTWARNINI="%%PREFIX%%/etc/mqttwarn/mqttwarn.ini",MQTTWARNLOG="/var [include] files = mqttwarn.conf - -* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +EOM +} +] diff --git a/sysutils/py-pyznap/files/pkg-message.in b/sysutils/py-pyznap/files/pkg-message.in index 4bc829de52bb..ae97ff64e4bb 100644 --- a/sysutils/py-pyznap/files/pkg-message.in +++ b/sysutils/py-pyznap/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Now it is time to set-up the main configuration file. First run "pyznap setup", a sample configuration will be copied @@ -8,3 +11,6 @@ following entries: */15 * * * * root %%BINDIR%%/pyznap snap >> /var/log/pyznap.log 0 0 * * * root %%BINDIR%%/pyznap send >> /var/log/pyznap.log +EOM +} +] diff --git a/sysutils/py-salt/files/pkg-message.in b/sysutils/py-salt/files/pkg-message.in index 4aedb8e3c137..49e8d125da15 100644 --- a/sysutils/py-salt/files/pkg-message.in +++ b/sysutils/py-salt/files/pkg-message.in @@ -1,13 +1,13 @@ - -=================================================================================================== - +[ +{ type: install + message: <<EOM To configure a Salt Master, do the following: o Copy %%PREFIX%%/etc/salt/master.sample to %%PREFIX%%/etc/salt/master o Update to meet your needs o sysrc salt_master_enable="YES" ---------------------------------------------------------------------------------------------------- + To configure a Salt Minion, do the following: @@ -15,7 +15,7 @@ To configure a Salt Minion, do the following: o Update 'master: salt' to point to your Salt Master's hostname or IP o sysrc salt_minion_enable="YES" ---------------------------------------------------------------------------------------------------- + To configure a Salt Proxy Minion, do the following: @@ -23,7 +23,7 @@ To configure a Salt Proxy Minion, do the following: o sysrc salt_proxy_list="" o Update the salt_proxy_list with the proxy minion name(s) ---------------------------------------------------------------------------------------------------- + To change the Transport method from the default option of Zeromq to either TCP or RAET: @@ -31,6 +31,6 @@ To change the Transport method from the default option of Zeromq to either TCP o o Ensure the master and minions all have salt installed with these same options and dependencies o Add the line 'transport: [tcp|raet]' to both the master and minion configuration files o Restart salt on the master and minions - -=================================================================================================== - +EOM +} +] diff --git a/sysutils/py-scarab/files/pkg-message.in b/sysutils/py-scarab/files/pkg-message.in index 4303bfb7a244..be6a690098a6 100644 --- a/sysutils/py-scarab/files/pkg-message.in +++ b/sysutils/py-scarab/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Before you can manipulate PRs with this program in FreeBSD Bugzilla you have to create an API key and copy it in your config file. @@ -5,3 +8,6 @@ Login -> Preferences -> API keys -> Generate a new API key The config file is probed from your home directory as ".scarabrc". A sample scarabrc config file is located under %%EXAMPLESDIR%%. +EOM +} +] diff --git a/sysutils/pydf/files/pkg-message.in b/sysutils/pydf/files/pkg-message.in index f20a9967c977..58af5777911d 100644 --- a/sysutils/pydf/files/pkg-message.in +++ b/sysutils/pydf/files/pkg-message.in @@ -1,8 +1,8 @@ - -========================================================= - +[ +{ type: install + message: <<EOM Please copy the file %%PREFIX%%/etc/pydfrc.sample to %%PREFIX%%/etc/pydfrc and edit your configuration. - -========================================================= - +EOM +} +] diff --git a/sysutils/qchroot/pkg-message b/sysutils/qchroot/pkg-message index 48db5fa34121..ffecfbdf6a4a 100644 --- a/sysutils/qchroot/pkg-message +++ b/sysutils/qchroot/pkg-message @@ -1,4 +1,8 @@ - +[ +{ type: install + message: <<EOM First issue "rehash" command to enable the qchroot script (if using csh). Then issue "man qchroot" to read about qchroot usage. - +EOM +} +] diff --git a/sysutils/qjail/pkg-message b/sysutils/qjail/pkg-message index 04128461cce5..cf3bc8823978 100644 --- a/sysutils/qjail/pkg-message +++ b/sysutils/qjail/pkg-message @@ -1,5 +1,6 @@ -######################################################################## - +[ +{ type: install + message: <<EOM Use the qjail utility to deploy small or large numbers of jails quickly. First issue "rehash" command to enable the qjail command (if using csh). @@ -9,5 +10,6 @@ Then issue "man qjail-howto" For example of driving public traffic to non-vnet jails. "man qjail-vnet-howto" For example of creating vnet jails. "man qjail-ipv6-testing" For example of testing jails with ipv6 addresses. - -######################################################################## +EOM +} +] diff --git a/sysutils/racktables/files/pkg-message.in b/sysutils/racktables/files/pkg-message.in index c9fe9e5c0cdf..481858363c9e 100644 --- a/sysutils/racktables/files/pkg-message.in +++ b/sysutils/racktables/files/pkg-message.in @@ -1,4 +1,6 @@ ---------------------------------------------------------------------- +[ +{ type: install + message: <<EOM Apache users should create a racktables.conf file under their apache Includes directory with the following contents: <Directory %%WWWDIR%%/wwwroot> @@ -13,4 +15,6 @@ locally. Then, visit http://your.system/racktables/ and follow the instructions to complete the setup. ---------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/radmind/files/pkg-message.in b/sysutils/radmind/files/pkg-message.in index e99cde202f90..e3d70dd5c532 100644 --- a/sysutils/radmind/files/pkg-message.in +++ b/sysutils/radmind/files/pkg-message.in @@ -1,4 +1,6 @@ -#################### +[ +{ type: install + message: <<EOM The radmind daemon for this port runs as user "%%RADMINUSER%%" by default. If you wish to change this behavior you may set the radmind_user variable in /etc/rc.conf @@ -8,4 +10,6 @@ A template configuration file has been installed as Please modify this file as necessary and place it in %%RADMIND_BASE_DIR%%/config to ensure proper operation of the radmind daemon. -#################### +EOM +} +] diff --git a/sysutils/read-edid/pkg-message b/sysutils/read-edid/pkg-message index 2179426d612d..83673e80653f 100644 --- a/sysutils/read-edid/pkg-message +++ b/sysutils/read-edid/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM FreeBSD has mapping at zero address feature turned off since 8.0-RC2: http://security.freebsd.org/advisories/FreeBSD-EN-09:05.null.asc @@ -11,3 +14,6 @@ disable this protection, issue the following command: To return to secure state: # sysctl security.bsd.map_at_zero=0 +EOM +} +] diff --git a/sysutils/realsync/files/pkg-message.in b/sysutils/realsync/files/pkg-message.in index ddc091e1041e..c593875e30f0 100644 --- a/sysutils/realsync/files/pkg-message.in +++ b/sysutils/realsync/files/pkg-message.in @@ -1,4 +1,6 @@ -------------------------------------------------------------------------------------------- +[ +{ type: install + message: <<EOM Author: Krasimir Nachev e-mail: krasi@it-sys.org Please: 1. Edit %%PREFIX%%/etc/realsync.cfg @@ -9,5 +11,6 @@ Please: 4. Set realsync_enable="YES" in /etc/rc.conf Start the program: %%PREFIX%%/etc/rc.d/realsync start That's all! -------------------------------------------------------------------------------------------- - +EOM +} +] diff --git a/sysutils/rhc/pkg-message b/sysutils/rhc/pkg-message index 1e8464445aca..87790600637a 100644 --- a/sysutils/rhc/pkg-message +++ b/sysutils/rhc/pkg-message @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM If this is your first time installing the RHC tools, please run 'rhc setup' to configure your account and working development environment. +EOM +} +] diff --git a/sysutils/rsyncbackup/files/pkg-message.in b/sysutils/rsyncbackup/files/pkg-message.in index e9873521c5f1..0854f9d5fac7 100644 --- a/sysutils/rsyncbackup/files/pkg-message.in +++ b/sysutils/rsyncbackup/files/pkg-message.in @@ -1,6 +1,6 @@ -NOTE: -========== - +[ +{ type: install + message: <<EOM rsyncbackup is now installed on your system. - rsyncbackup installed into %%PREFIX%%/bin/rsyncbackup @@ -16,3 +16,6 @@ rsyncbackup is now installed on your system. %%DOCSDIR%% Official page: http://BSDforge.com/projects/sysutils/rsync-backup/ +EOM +} +] diff --git a/sysutils/rsyslog8/files/pkg-message.in b/sysutils/rsyslog8/files/pkg-message.in index 9a95eaa33bf9..87e6076dbf4e 100644 --- a/sysutils/rsyslog8/files/pkg-message.in +++ b/sysutils/rsyslog8/files/pkg-message.in @@ -1,4 +1,6 @@ -=================================================================== +[ +{ type: install + message: <<EOM To start using rsyslogd(8), stop syslogd(8) if it's running and add the following lines to rc.conf(5): @@ -22,4 +24,6 @@ newsyslog(8) has the path of syslogd's pid file hardcoded. To make it work seamlessly with rsyslog, add this: rsyslogd_pidfile="/var/run/syslog.pid" -=================================================================== +EOM +} +] diff --git a/sysutils/rubygem-bolt/pkg-message b/sysutils/rubygem-bolt/pkg-message index a07d7a887e00..82138ff79f15 100644 --- a/sysutils/rubygem-bolt/pkg-message +++ b/sysutils/rubygem-bolt/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM This port depends on security/rubygem-net-ssh which has stricter defaults that OpenSSH: when using strict host key checking, security/rubygem-net-ssh will refuse the connexion if both the remote host name and IP address are not on the @@ -28,3 +31,6 @@ As a consequence, host key verification may need additional work: Some future version of security/rubygem-net-ssh should drop strict host key checking entirely, for more details, see: https://github.com/net-ssh/net-ssh/pull/663 +EOM +} +] diff --git a/sysutils/rubygem-smart_proxy_chef/pkg-message b/sysutils/rubygem-smart_proxy_chef/pkg-message index b0637e1f314c..b72a012fb01f 100644 --- a/sysutils/rubygem-smart_proxy_chef/pkg-message +++ b/sysutils/rubygem-smart_proxy_chef/pkg-message @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM Further configuration is required to connect Chef and foreman-proxy, see: http://theforeman.org/plugins/foreman_chef/ +EOM +} +] diff --git a/sysutils/rubygem-smart_proxy_salt/pkg-message b/sysutils/rubygem-smart_proxy_salt/pkg-message index a0e2457deb25..56e73e4c1b01 100644 --- a/sysutils/rubygem-smart_proxy_salt/pkg-message +++ b/sysutils/rubygem-smart_proxy_salt/pkg-message @@ -1,5 +1,11 @@ +[ +{ type: install + message: <<EOM Further configuration is required to connect salt and foreman-proxy, see: http://theforeman.org/plugins/foreman_salt/ To upload reports from SaltStack highstates to Foreman, add a line like this to your /etc/crontab: */10 * * * * root /usr/local/sbin/upload-salt-reports >>/var/log/foreman-proxy/salt-cron.log 2>&1 +EOM +} +] diff --git a/sysutils/runit/files/pkg-message.in b/sysutils/runit/files/pkg-message.in index 653ecfadb8a3..bb305bba05b3 100644 --- a/sysutils/runit/files/pkg-message.in +++ b/sysutils/runit/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM Using runit with FreeBSD init: # mkdir %%SERVICE_DIR%% @@ -41,3 +44,6 @@ Note: On FreeBSD, runit-init works in %%PREFIX%%/sbin, but # echo 'init_path="%%PREFIX%%/sbin/runit-init:/sbin/init:/sbin/oninit:/sbin/init.bak:/rescue/init"' >> /boot/loader.conf making upgrades easier. +EOM +} +] diff --git a/sysutils/s-tui/pkg-message b/sysutils/s-tui/pkg-message index 1d3c386de256..b27a88f38d74 100644 --- a/sysutils/s-tui/pkg-message +++ b/sysutils/s-tui/pkg-message @@ -1,4 +1,6 @@ -====================================================================== +[ +{ type: install + message: <<EOM You installed s-tui, stress test and monitoring tool. s-tui is experimental on FreeBSD. Please help testing it. @@ -7,4 +9,6 @@ additionally one of the following ports: - benchmarks/stress-ng - sysutils/stress -====================================================================== +EOM +} +] diff --git a/sysutils/samesame/pkg-message b/sysutils/samesame/pkg-message index b7b51b8753b2..d2037f69097d 100644 --- a/sysutils/samesame/pkg-message +++ b/sysutils/samesame/pkg-message @@ -1,4 +1,8 @@ ---------------------------------------------------- +[ +{ type: install + message: <<EOM A 2 clause BSD licence applies to this application: http://samesame.kruijff.org/license.html ---------------------------------------------------- +EOM +} +] diff --git a/sysutils/scalpel/files/pkg-message.in b/sysutils/scalpel/files/pkg-message.in index 0de1eac040a8..92f1dabc2ee4 100644 --- a/sysutils/scalpel/files/pkg-message.in +++ b/sysutils/scalpel/files/pkg-message.in @@ -1,4 +1,6 @@ -************************************************************ +[ +{ type: install + message: <<EOM Scalpel has been successfully installed on your system. Now it is time to configure this package. @@ -7,5 +9,6 @@ directory as scalpel.conf and edit it. Scalpel will always use scalpel.conf in your current working directory, if not specified with "-c /path/to/scalpel.conf". - -************************************************************ +EOM +} +] diff --git a/sysutils/scanbuttond/files/pkg-message.in b/sysutils/scanbuttond/files/pkg-message.in index 8274da776559..86be9bfae403 100644 --- a/sysutils/scanbuttond/files/pkg-message.in +++ b/sysutils/scanbuttond/files/pkg-message.in @@ -1,4 +1,6 @@ -------------------------------------------------------------------------------- +[ +{ type: install + message: <<EOM scanbuttond has been installed, but is not quite ready to be used yet. To make scanbuttond actually do something you have to edit @@ -34,4 +36,6 @@ detach 20 { match "product" "0x220e"; action "/usr/bin/killall scanbuttond"; }; -------------------------------------------------------------------------------- +EOM +} +] diff --git a/sysutils/screen/pkg-message b/sysutils/screen/pkg-message index a7c017da25da..899fc017b061 100644 --- a/sysutils/screen/pkg-message +++ b/sysutils/screen/pkg-message @@ -1,9 +1,11 @@ -============================================================= - +[ +{ type: install + message: <<EOM As of GNU Screen 4.4.0: Note that there was fix to screen message structure field responsible for $TERM handling, making it impossible to attach to older versions. - -============================================================= +EOM +} +] diff --git a/sysutils/scterc/files/pkg-message.in b/sysutils/scterc/files/pkg-message.in index ae193fab9319..02d03d43d337 100644 --- a/sysutils/scterc/files/pkg-message.in +++ b/sysutils/scterc/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To enable setting hard disk SCT ERC on system boot time, add the following to your /etc/rc.conf: @@ -13,3 +16,6 @@ following to your /etc/rc.conf: scterc_write_timeout="70" See %%DOCSDIR%%/README.md for more info. +EOM +} +] diff --git a/sysutils/siegfried/pkg-message b/sysutils/siegfried/pkg-message index 23bd0c9f818a..5a5321bacac2 100644 --- a/sysutils/siegfried/pkg-message +++ b/sysutils/siegfried/pkg-message @@ -1 +1,7 @@ +[ +{ type: install + message: <<EOM You should run 'sf -update' to update your local PRONOM database +EOM +} +] diff --git a/sysutils/smartmontools/files/pkg-message.in b/sysutils/smartmontools/files/pkg-message.in index 9c68b7009fc2..f34049696d84 100644 --- a/sysutils/smartmontools/files/pkg-message.in +++ b/sysutils/smartmontools/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM smartmontools has been installed To check the status of drives, use the following: @@ -18,3 +21,6 @@ Copy this file to %%PREFIX%%/etc/smartd.conf and edit appropriately To have smartd start at boot echo 'smartd_enable="YES"' >> /etc/rc.conf +EOM +} +] diff --git a/sysutils/snmp_exporter/files/pkg-message.in b/sysutils/snmp_exporter/files/pkg-message.in index 408e890e3148..8ad5d858310c 100644 --- a/sysutils/snmp_exporter/files/pkg-message.in +++ b/sysutils/snmp_exporter/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To generate the snmp.yml configuration file for snmp_exporter, edit %%ETCDIR%%/generator.yml and add relevant MIBs, then run @@ -5,3 +8,6 @@ edit %%ETCDIR%%/generator.yml and add relevant MIBs, then run To run snmp_exporter, set the snmp_exporter_enable="YES" rcvar and point your prometheus instance at port 9116. +EOM +} +] diff --git a/sysutils/snowlog/pkg-message b/sysutils/snowlog/pkg-message index 22620ef76d04..30b7e319715a 100644 --- a/sysutils/snowlog/pkg-message +++ b/sysutils/snowlog/pkg-message @@ -1,5 +1,6 @@ -######################################################### - +[ +{ type: install + message: <<EOM To use snowlog, adding this to httpd.conf LogFormat "%a\t%l\t%u\t%{%s}t\t%r\t%>s\t%X\t%{Content-Type}o\t%b\t%{Referer}i\t%{User-Agent}i\t%V\t%{LogHint}e" parsable @@ -7,5 +8,6 @@ LogFormat "%a\t%l\t%u\t%{%s}t\t%r\t%>s\t%X\t%{Content-Type}o\t%b\t%{Referer}i\t% Next, tell apache to make parsable logs: CustomLog /path/to/httpd_access_parsable.log parsable - -######################################################### +EOM +} +] diff --git a/sysutils/ssync/pkg-message b/sysutils/ssync/pkg-message index 4ddb1c9b24af..f2a5e46898db 100644 --- a/sysutils/ssync/pkg-message +++ b/sysutils/ssync/pkg-message @@ -1,2 +1,8 @@ +[ +{ type: install + message: <<EOM You will need to copy ssyncd.conf.sample to ssyncd.conf and ssyncd.work.sample to ssyncd.work before this port can be used. +EOM +} +] diff --git a/sysutils/swapmon/pkg-message b/sysutils/swapmon/pkg-message index ce3c7c5833a6..7e2ce63f0b9a 100644 --- a/sysutils/swapmon/pkg-message +++ b/sysutils/swapmon/pkg-message @@ -1,4 +1,10 @@ +[ +{ type: install + message: <<EOM To have swapmon run automatically after each boot, add the following line to /etc/rc.conf: swapmon_enable="YES" +EOM +} +] diff --git a/sysutils/symon/files/pkg-message.in b/sysutils/symon/files/pkg-message.in index 6c65c46812a0..50bf4fd584bc 100644 --- a/sysutils/symon/files/pkg-message.in +++ b/sysutils/symon/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM For the system monitor symon, use the following steps 1. Copy %%PREFIX%%/share/examples/symon/symon.conf @@ -13,3 +16,6 @@ For the data collector symux, use the following steps %%PREFIX%%/share/symon/c_smrrds.sh all to create the RR database. 3. Run symux +EOM +} +] diff --git a/sysutils/syslog-ng310/files/pkg-message.in b/sysutils/syslog-ng310/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng310/files/pkg-message.in +++ b/sysutils/syslog-ng310/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng311/files/pkg-message.in b/sysutils/syslog-ng311/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng311/files/pkg-message.in +++ b/sysutils/syslog-ng311/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng312/files/pkg-message.in b/sysutils/syslog-ng312/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng312/files/pkg-message.in +++ b/sysutils/syslog-ng312/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng313/files/pkg-message.in b/sysutils/syslog-ng313/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng313/files/pkg-message.in +++ b/sysutils/syslog-ng313/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng314/files/pkg-message.in b/sysutils/syslog-ng314/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng314/files/pkg-message.in +++ b/sysutils/syslog-ng314/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng315/files/pkg-message.in b/sysutils/syslog-ng315/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng315/files/pkg-message.in +++ b/sysutils/syslog-ng315/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng317/files/pkg-message.in b/sysutils/syslog-ng317/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng317/files/pkg-message.in +++ b/sysutils/syslog-ng317/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng318/files/pkg-message.in b/sysutils/syslog-ng318/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng318/files/pkg-message.in +++ b/sysutils/syslog-ng318/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng319/files/pkg-message.in b/sysutils/syslog-ng319/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng319/files/pkg-message.in +++ b/sysutils/syslog-ng319/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng320/files/pkg-message.in b/sysutils/syslog-ng320/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng320/files/pkg-message.in +++ b/sysutils/syslog-ng320/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng321/files/pkg-message.in b/sysutils/syslog-ng321/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng321/files/pkg-message.in +++ b/sysutils/syslog-ng321/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng322/files/pkg-message.in b/sysutils/syslog-ng322/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng322/files/pkg-message.in +++ b/sysutils/syslog-ng322/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/syslog-ng39/files/pkg-message.in b/sysutils/syslog-ng39/files/pkg-message.in index 36cb7e65a243..95140fc941eb 100644 --- a/sysutils/syslog-ng39/files/pkg-message.in +++ b/sysutils/syslog-ng39/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM syslog-ng is now installed! To replace FreeBSD's standard syslogd (/usr/sbin/syslogd), complete these steps: @@ -26,4 +28,6 @@ syslog-ng is now installed! To replace FreeBSD's standard syslogd 5. Start syslog-ng: %%PREFIX%%/etc/rc.d/syslog-ng start - +EOM +} +] diff --git a/sysutils/tarsnap-periodic/pkg-message b/sysutils/tarsnap-periodic/pkg-message index 83e10b6fc1bc..d02ebb044572 100644 --- a/sysutils/tarsnap-periodic/pkg-message +++ b/sysutils/tarsnap-periodic/pkg-message @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM In order to enable periodic tarsnap backups you need to add these lines to your /etc/periodic.conf @@ -11,3 +13,6 @@ weekly_tarsnap_backup_keep=5 monthly_tarsnap_backup_enable="YES" monthly_tarsnap_backup_paths="/" monthly_tarsnap_backup_keep=2 +EOM +} +] diff --git a/sysutils/tarsnap/pkg-message b/sysutils/tarsnap/pkg-message index 30b09f0598f7..c91008dc7129 100644 --- a/sysutils/tarsnap/pkg-message +++ b/sysutils/tarsnap/pkg-message @@ -1,5 +1,6 @@ -================================================================================ - +[ +{ type: install + message: <<EOM If you have never used tarsnap before, you will need to create an account with the tarsnap service and deposit money into the account before you can start using tarsnap; see @@ -10,5 +11,6 @@ Once you have a tarsnap account you will need to create a key file using the tarsnap-keygen utility before you start storing archives; this key file MUST BE KEPT IN A SAFE LOCATION since you will not be able to read your backups without it. - -================================================================================ +EOM +} +] diff --git a/sysutils/torque/files/pkg-message.in b/sysutils/torque/files/pkg-message.in index adf720cc30e1..564ca2ef2640 100644 --- a/sysutils/torque/files/pkg-message.in +++ b/sysutils/torque/files/pkg-message.in @@ -1,16 +1,19 @@ -****************************************************************************** +[ +{ type: install + message: <<EOM On the server, run: torque-config head -****************************************************************************** + On compute nodes, run: torque-config compute -****************************************************************************** + For further information, see http://www.adaptivecomputing.com/products/open-source/torque/ - -****************************************************************************** +EOM +} +] diff --git a/sysutils/ttyload/files/pkg-message.in b/sysutils/ttyload/files/pkg-message.in index b05fb29982ed..e5cf868c0578 100644 --- a/sysutils/ttyload/files/pkg-message.in +++ b/sysutils/ttyload/files/pkg-message.in @@ -1,8 +1,12 @@ -########################################################################### +[ +{ type: install + message: <<EOM ttyload has been installed. If you have questions read %%DOCSDIR%%/README For more information about ttyload visit: http://www.daveltd.com/src/util/ttyload/ -########################################################################### +EOM +} +] diff --git a/sysutils/tuptime/files/pkg-message.in b/sysutils/tuptime/files/pkg-message.in index 89a9d77859f3..25fbb076b8c7 100644 --- a/sysutils/tuptime/files/pkg-message.in +++ b/sysutils/tuptime/files/pkg-message.in @@ -1,5 +1,6 @@ -====================================================================== - +[ +{ type: install + message: <<EOM tuptime requires execution at startup and shutdown on rc.d, please add to /etc/rc.conf: @@ -9,5 +10,6 @@ tuptime requires a scheduled execution on cron, please add to /etc/crontab: */5 * * * * root %%PREFIX%%/bin/tuptime -x > /dev/null - -====================================================================== +EOM +} +] diff --git a/sysutils/uhidd/pkg-message b/sysutils/uhidd/pkg-message index 6d0f3db06a07..5fc70522e42c 100644 --- a/sysutils/uhidd/pkg-message +++ b/sysutils/uhidd/pkg-message @@ -1,5 +1,6 @@ -============================================================================== - +[ +{ type: install + message: <<EOM To use uhidd daemon for USB HID devices, depends on which sub class driver you want to attach, to avoid conflicts between the daemon and the kernel drivers, you should either use the command line option '-u' @@ -28,5 +29,6 @@ To manually start/stop uhidd daemon on certain device, run: See http://wiki.FreeBSD.org/uhidd for more details about how to install and setup the daemon. - -============================================================================== +EOM +} +] diff --git a/sysutils/unetbootin/pkg-message b/sysutils/unetbootin/pkg-message index 0d461173cf3b..face699a42d3 100644 --- a/sysutils/unetbootin/pkg-message +++ b/sysutils/unetbootin/pkg-message @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM If SysLinux refuses to boot with a "Boot error" message when written to a PC partition (slice), try to reformat the drive in raw (or dedicated) mode (that is, without a partition table), then reinstall things again. +EOM +} +] diff --git a/sysutils/upsdaemon/pkg-message b/sysutils/upsdaemon/pkg-message index d75fe006ba77..40ce73da4105 100644 --- a/sysutils/upsdaemon/pkg-message +++ b/sysutils/upsdaemon/pkg-message @@ -1,7 +1,10 @@ -************************************************* +[ +{ type: install + message: <<EOM NOTICE: To run UpsDaemon from startup add upsdaemon_enable="YES" in rc.conf - -************************************************* +EOM +} +] diff --git a/sysutils/uschedule/pkg-message b/sysutils/uschedule/pkg-message index e0933d6792de..69ad9c32d47c 100644 --- a/sysutils/uschedule/pkg-message +++ b/sysutils/uschedule/pkg-message @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM Post-installation information: Please read uschedule_intro(7) and visit http://www.ohse.de/uwe/uschedule.html @@ -10,3 +12,6 @@ cron_enable=NO in /etc/rc.conf. See rc.conf(5) and /etc/defaults/rc.conf for further information. +EOM +} +] diff --git a/sysutils/usermin/files/pkg-message.in b/sysutils/usermin/files/pkg-message.in index 578f69390543..4e389ba1f158 100644 --- a/sysutils/usermin/files/pkg-message.in +++ b/sysutils/usermin/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM After installing Usermin for the first time you should perform the following steps as root: @@ -10,4 +12,6 @@ steps as root: The parameters requested by setup.sh may then be changed from within Usermin itself. - +EOM +} +] diff --git a/sysutils/virtualmin/pkg-message b/sysutils/virtualmin/pkg-message index 158c2d583075..7aa9d9e6a036 100644 --- a/sysutils/virtualmin/pkg-message +++ b/sysutils/virtualmin/pkg-message @@ -1,4 +1,8 @@ -=============================================================== +[ +{ type: install + message: <<EOM You will have to manually grant user permissions to access this module from Webmin. -=============================================================== +EOM +} +] diff --git a/sysutils/vm-bhyve/pkg-message b/sysutils/vm-bhyve/pkg-message index 31d6ed9527a4..035201335f27 100644 --- a/sysutils/vm-bhyve/pkg-message +++ b/sysutils/vm-bhyve/pkg-message @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To enable vm-bhyve, please add the following lines to rc.conf, depending on whether you are using ZFS storage or not. Please note that the directory or dataset specified should already exist. @@ -11,10 +14,12 @@ OR vm_dir="/directory/path" Then run 'vm init'. - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - +EOM +} +{ type: upgrade, maximum_version: 1.2 + message: <<EOM Please note, if upgrading from version 1.1, it is advised to shutdown guests and restart the host in order to re-create all virtual switches using new identifiers. - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +EOM +} +] diff --git a/sysutils/webmin/files/pkg-message.in b/sysutils/webmin/files/pkg-message.in index 0903e84ddf36..e27e9c23793c 100644 --- a/sysutils/webmin/files/pkg-message.in +++ b/sysutils/webmin/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM After installing Webmin for the first time you should perform the following steps as root: @@ -10,4 +12,6 @@ steps as root: The parameters requested by setup.sh may then be changed from within Webmin itself. - +EOM +} +] diff --git a/sysutils/wmcube/files/pkg-message.in b/sysutils/wmcube/files/pkg-message.in index 785ca4fb3a4e..cb3d750ffe97 100644 --- a/sysutils/wmcube/files/pkg-message.in +++ b/sysutils/wmcube/files/pkg-message.in @@ -1,7 +1,11 @@ -------------------------------------------- +[ +{ type: install + message: <<EOM The extra 3d objects are located in: %%PREFIX%%/share/wmcube To run wmcube type: wmcube -o %%PREFIX%%/share/wmcube & -------------------------------------------- +EOM +} +] diff --git a/sysutils/xcdroast/pkg-message b/sysutils/xcdroast/pkg-message index ee064b330064..91e97e4f470e 100644 --- a/sysutils/xcdroast/pkg-message +++ b/sysutils/xcdroast/pkg-message @@ -1,12 +1,11 @@ -************************************************************ - ATTENTION! - +[ +{ type: install + message: <<EOM You must be root to use xcdroast. To use it as normal user, click "enable-nonroot" after starting it at first as root. But beware! This is a security risk! It modifies the following files and gives them the set-user-ID-on-execution bit: - -xcdwrap - -************************************************************ +EOM +} +] diff --git a/sysutils/z/files/pkg-message.in b/sysutils/z/files/pkg-message.in index 13da19fa806f..47124c25408e 100644 --- a/sysutils/z/files/pkg-message.in +++ b/sysutils/z/files/pkg-message.in @@ -1,3 +1,9 @@ +[ +{ type: install + message: <<EOM To use z, put this command in your .zshrc/.bashrc: . %%DATADIR%%/z.sh +EOM +} +] diff --git a/sysutils/zap/pkg-message b/sysutils/zap/pkg-message index a02ad84ee418..c7a25a6452ce 100644 --- a/sysutils/zap/pkg-message +++ b/sysutils/zap/pkg-message @@ -1,7 +1,11 @@ -============================================================= +[ +{ type: install + message: <<EOM See http://ftfl.ca/blog/2016-12-27-zfs-replication.html for a description of a replication strategy. -============================================================= +EOM +} +] diff --git a/sysutils/zfs-periodic/pkg-message b/sysutils/zfs-periodic/pkg-message index fb76bd52d1e0..010d2e7d1ce1 100644 --- a/sysutils/zfs-periodic/pkg-message +++ b/sysutils/zfs-periodic/pkg-message @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM In order to enable periodic snapshots you need to add these lines to your /etc/periodic.conf @@ -23,3 +25,6 @@ To get hourly snapshots you also need to add something like this to /etc/crontab: 2 * * * * root periodic hourly +EOM +} +] diff --git a/sysutils/zfs-snapshot-mgmt/files/pkg-message.in b/sysutils/zfs-snapshot-mgmt/files/pkg-message.in index 4d5bd81cca7f..743b1cdc8341 100644 --- a/sysutils/zfs-snapshot-mgmt/files/pkg-message.in +++ b/sysutils/zfs-snapshot-mgmt/files/pkg-message.in @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM To actually turn on the automatic snapshots you have to do the following: 1. Add an appropriate crontab entry, e.g.: @@ -6,4 +8,6 @@ To actually turn on the automatic snapshots you have to do the following: echo "*/5 * * * * root %%PREFIX%%/bin/zfs-snapshot-mgmt" >> /etc/crontab See zfs-snapshot-mgmt(8) manpage for more details. - +EOM +} +] diff --git a/sysutils/zfsnap/pkg-message b/sysutils/zfsnap/pkg-message index 1114ee61fb51..927cda7debfd 100644 --- a/sysutils/zfsnap/pkg-message +++ b/sysutils/zfsnap/pkg-message @@ -1,4 +1,6 @@ - +[ +{ type: install + message: <<EOM To run zfSnap periodically you can add these options to your /etc/periodic.conf @@ -48,3 +50,6 @@ info. Feedback welcomed: graudeejs@gmail.com +EOM +} +] diff --git a/sysutils/zfstools/files/pkg-message.in b/sysutils/zfstools/files/pkg-message.in index 122d1af16cd5..6df0d4d832a2 100644 --- a/sysutils/zfstools/files/pkg-message.in +++ b/sysutils/zfstools/files/pkg-message.in @@ -1,3 +1,6 @@ +[ +{ type: install + message: <<EOM To enable automatic snapshots, place lines such as these into /etc/crontab: PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin @@ -24,3 +27,6 @@ Or for specific intervals: zfs set com.sun:auto-snapshot:frequent=false DATASET See website and command usage output for further details. +EOM +} +] diff --git a/sysutils/zrepl/files/pkg-message.in b/sysutils/zrepl/files/pkg-message.in index 2bdeeabd7776..9a94b181bee8 100644 --- a/sysutils/zrepl/files/pkg-message.in +++ b/sysutils/zrepl/files/pkg-message.in @@ -1,4 +1,6 @@ ------------------------------------------------------------------------- +[ +{ type: install + message: <<EOM Messages from sysutils/zrepl: SETUP BEFORE FIRST USE: @@ -33,4 +35,6 @@ is different from previous releases where pruning only affected snapshots with the configured snapshotting prefix. Make sure that snapshots to be kept or ignored by zrepl are covered, e.g. by using the regex keep rule. This also applies to snapshots taken by means other than zrepl (e.g. manually). ------------------------------------------------------------------------- +EOM +} +] |