diff options
Diffstat (limited to 'www/cacheboy15-devel/Makefile')
| -rw-r--r-- | www/cacheboy15-devel/Makefile | 414 |
1 files changed, 0 insertions, 414 deletions
diff --git a/www/cacheboy15-devel/Makefile b/www/cacheboy15-devel/Makefile deleted file mode 100644 index 557175db07b2..000000000000 --- a/www/cacheboy15-devel/Makefile +++ /dev/null @@ -1,414 +0,0 @@ -# New ports collection makefile for: squid24 -# Date created: Tue Mar 27 14:56:08 CEST 2001 -# Whom: Adrian Chadd <adrian@FreeBSD.org> -# -# $FreeBSD$ -# -# Tunables not (yet) configurable via 'make config': -# SQUID_{U,G}ID -# Which user/group Squid should run as (default: squid/squid). -# The user and group will be created if they do not already exist using -# a uid:gid of 100:100. -# NOTE: older versions of Squid defaulted to nobody/nogroup. -# If you wish to run Squid as "nobody" (which is not recommended), please -# define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment -# before you start the update or installation of this port. -# -# SQUID_LANGUAGES -# A list of languages for which error page files should be installed -# (default: all) -# -# E.g. use `make SQUID_LANGUAGES="English French"' if you want to -# install the files for these languages only. -# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's -# definition to see which values are valid. -# -# SQUID_DEFAULT_LANG -# If you define SQUID_LANGUAGES, select which language should be the default -# one (this variable defaults to English). This setting can be overwritten -# with squid.conf's error_directory directive. -# -# SQUID_CONFIGURE_ARGS -# Additional configuration options. -# -# To enable them, use e.g -# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' -# -# The list below may be incomplete, please see the configure script -# in the Squid source distribution for the complete list of additional -# options. -# Note that you probably do not need to worry about these options in most -# cases, they are included in case you want to experiment with them. -# -# --enable-dlmalloc -# Compile and use the malloc package from Doug Lea -# --enable-gnuregex -# Compile and use the supplied GNUregex routines instead of BSD regex -# (not recommended). -# --enable-xmalloc-statistics -# Show malloc statistics in status page -# --enable-cachemgr-hostname=some.hostname -# Set an explicit hostname in cachemgr.cgi -# --enable-truncate -# Use truncate() rather than unlink() -# --disable-unlinkd -# Do not use "unlinkd" -# --with-aufs-threads=N_THREADS -# Tune the number of worker threads for the aufs object -# --with-coss-membuf-size -# COSS membuf size (default: 1048576 bytes) -# --with-maxfd=N -# Override the maximum number of filedescriptors. Useful if you -# build as another user who is not privileged to use the amount -# of filedescriptors the resulting binary is expected to support. -# --enable-ntlm-fail-open -# Enable NTLM fail open, where a helper that fails one of the -# Authentication steps can allow Squid to still authenticate the user -# --enable-x-accelerator-vary -# Enable support for the X-Accelerator-Vary HTTP header. Can be used -# to indicate variance within an accelerator setup. Typically used -# together with other code that adds custom HTTP headers to the -# requests. -# --enable-forward-log -# Enable experimental forward_log directive. -# --enable-multicast-miss -# Enable experimental multicast notification of cachemisses. - -PORTNAME= cacheboy -DISTVERSION= 1.0 -PORTREVISION= 6 -CATEGORIES= www -MASTER_SITES= ${MASTER_SITE_GOOGLE_CODE} -DISTNAME= CACHEBOY_1.0 -# EXTRACT_SUFX= .tar.gz -DIST_SUBDIR= CACHEBOY_1.0 - -MAINTAINER= adrian@freebsd.org -COMMENT= HTTP Caching Proxy (Squid Derivative) - -CONFLICTS= squid-[0-9]* -GNU_CONFIGURE= yes -USE_PERL5= yes -USE_RC_SUBR= squid - -SQUID_UID?= squid -SQUID_GID?= squid - -MAN8= cachemgr.cgi.8 squid.8 -docs= QUICKSTART README.Squid ChangeLog.Cacheboy doc/debug-sections.txt -PORTDOCS= ${docs:T} -PORTEXAMPLES= passwd.sql -SUB_FILES+= pkg-deinstall pkg-install pkg-message -SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} - -OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ - SQUID_SASL_AUTH "Install SASL authentication helpers" off \ - SQUID_DELAY_POOLS "Enable delay pools" off \ - SQUID_SNMP "Enable SNMP support" off \ - SQUID_CARP "Enable CARP support" on \ - SQUID_SSL "Enable SSL support for reverse proxies" off \ - SQUID_PINGER "Install the icmp helper" off \ - SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ - SQUID_HTCP "Enable HTCP support" off \ - SQUID_VIA_DB "Enable forward/via database" off \ - SQUID_CACHE_DIGESTS "Enable cache digests" off \ - SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ - SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \ - SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ - SQUID_IDENT "Enable ident (RFC 931) lookups" on \ - SQUID_REFERER_LOG "Enable Referer-header logging" off \ - SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ - SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ - SQUID_PF "Enable transparent proxying with PF" off \ - SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ - SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ - SQUID_AUFS "Enable the aufs storage scheme" off \ - SQUID_COSS "Enable the COSS storage scheme" off \ - SQUID_KQUEUE "Use kqueue(2) instead of poll(2)" on \ - SQUID_LARGEFILE "Support log and cache files >2GB" off \ - SQUID_STACKTRACES "Create backtraces on fatal errors" off - -etc_files= squid/cachemgr.conf.default \ - squid/mib.txt squid/mime.conf.default \ - squid/msntauth.conf.default squid/squid.conf.default - -icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ - anthony-box2.gif anthony-c.gif anthony-compressed.gif \ - anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ - anthony-f.gif anthony-image.gif anthony-image2.gif \ - anthony-layout.gif anthony-link.gif anthony-movie.gif \ - anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ - anthony-quill.gif anthony-script.gif anthony-sound.gif \ - anthony-tar.gif anthony-tex.gif anthony-text.gif \ - anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif - -error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ - ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ - ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_FORWARDING_DENIED \ - ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ - ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ - ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ - ERR_INVALID_REQ ERR_INVALID_RESP ERR_INVALID_URL \ - ERR_LIFETIME_EXP ERR_NO_RELAY ERR_ONLY_IF_CACHED_MISS \ - ERR_READ_ERROR ERR_READ_TIMEOUT ERR_SHUTTING_DOWN \ - ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ - ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT - -libexec= cachemgr.cgi digest_pw_auth diskd-daemon logfile-daemon \ - ip_user_check \ - msnt_auth ncsa_auth ntlm_auth \ - pam_auth smb_auth smb_auth.sh squid_db_auth squid_session \ - squid_unix_group wbinfo_group.pl -.if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" -libexec+= unlinkd -.endif - -sbin= RunCache squidclient squid - -CONFIGURE_ARGS= --bindir=${PREFIX}/sbin \ - --sbindir=${PREFIX}/sbin \ - --datadir=${PREFIX}/etc/squid \ - --libexecdir=${PREFIX}/libexec/squid \ - --localstatedir=${PREFIX}/squid \ - --sysconfdir=${PREFIX}/etc/squid \ - --enable-removal-policies="lru heap" \ - --disable-linux-netfilter \ - --disable-linux-tproxy \ - --disable-epoll - -.include <bsd.port.pre.mk> - -# Authentication methods and modules: - -basic_auth= DB NCSA PAM MSNT SMB -digest_auth= password -external_acl= ip_user session unix_group wbinfo_group -MAN8+= ncsa_auth.8 pam_auth.8 squid_db_auth.8 squid_session.8 \ - squid_unix_group.8 -.if defined(WITH_SQUID_LDAP_AUTH) -USE_OPENLDAP= yes -CFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -MAN8+= squid_ldap_auth.8 squid_ldap_group.8 -basic_auth+= LDAP -digest_auth+= ldap -external_acl+= ldap_group -libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group -.endif -.if defined(WITH_SQUID_SASL_AUTH) -LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2 -CFLAGS+= -I${LOCALBASE}/include -CPPFLAGS+= -I${LOCALBASE}/include -LDFLAGS+= -L${LOCALBASE}/lib -basic_auth+= SASL -libexec+= sasl_auth -.endif -.if !defined(NO_NIS) && !defined(WITHOUT_NIS) -basic_auth+= YP -libexec+= yp_auth -.endif -CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ - --enable-basic-auth-helpers="${basic_auth}" \ - --enable-digest-auth-helpers="${digest_auth}" \ - --enable-external-acl-helpers="${external_acl}" \ - --enable-ntlm-auth-helpers="SMB" -.if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS) -# XXX This currently only works with heimdal from the base system, -# see files/patch-helpers_negotiate_auth-squid_kerb_auth_* -CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" -libexec+= squid_kerb_auth -.endif - -# Storage schemes: - -storage_schemes= ufs diskd null -.if defined(WITH_SQUID_AUFS) -storage_schemes+= aufs -.if ${OSVERSION}>=501000 -# Only document libmap.conf where it is available: -EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs -.endif -# Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS -CONFIGURE_ARGS+= --with-pthreads -CFLAGS+= ${PTHREAD_CFLAGS} -.endif -.if defined(WITH_SQUID_COSS) -storage_schemes+= coss -.if !defined(WITH_SQUID_AUFS) -# use Posix AIO instead of aufs' AIO; note that you then need the kernel to -# supply AIO support, either by loading the aio(4) module (n/a on 4.x) or by -# adding the option VFS_AIO to your kernel configuration if you want to -# actually use COSS storage: -CONFIGURE_ARGS+= --enable-coss-aio-ops -.endif -sbin+= cossdump -.endif -CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" - -# Other options set via 'make config': - -.if defined(WITH_SQUID_DELAY_POOLS) -CONFIGURE_ARGS+= --enable-delay-pools -.endif -.if defined(WITH_SQUID_SNMP) -CONFIGURE_ARGS+= --enable-snmp -.endif -.if defined(WITHOUT_SQUID_CARP) -CONFIGURE_ARGS+= --disable-carp -.endif -.if defined(WITH_SQUID_SSL) -# we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only -# works when it is defined before bsd.port{.pre}.mk is .included. -# This makes it currently impossible to combine this macro with OPTIONS to -# conditionally include OpenSSL support. -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -CONFIGURE_ARGS+= --enable-ssl \ - --with-openssl="${OPENSSLBASE}" -CFLAGS+= -I${OPENSSLINC} -LDFLAGS+= -L${OPENSSLLIB} -.endif -.if defined(WITH_SQUID_PINGER) -CONFIGURE_ARGS+= --enable-icmp -libexec+= pinger -.endif -.if defined(WITH_SQUID_DNS_HELPER) -CONFIGURE_ARGS+= --disable-internal-dns -libexec+= dnsserver -.endif -.if defined(WITH_SQUID_HTCP) -CONFIGURE_ARGS+= --enable-htcp -.endif -.if defined(WITH_SQUID_VIA_DB) -CONFIGURE_ARGS+= --enable-forw-via-db -.endif -.if defined(WITH_SQUID_CACHE_DIGESTS) -CONFIGURE_ARGS+= --enable-cache-digests -.endif -.if defined(WITHOUT_SQUID_WCCP) -CONFIGURE_ARGS+= --disable-wccp -.endif -.if defined(WITH_SQUID_WCCPV2) -CONFIGURE_ARGS+= --enable-wccpv2 -.endif -.if defined(WITH_SQUID_STRICT_HTTP) -CONFIGURE_ARGS+= --disable-http-violations -.endif -.if defined(WITHOUT_SQUID_IDENT) -CONFIGURE_ARGS+= --disable-ident-lookups -.endif -.if defined(WITH_SQUID_REFERER_LOG) -CONFIGURE_ARGS+= --enable-referer-log -.endif -.if defined(WITH_SQUID_USERAGENT_LOG) -CONFIGURE_ARGS+= --enable-useragent-log -.endif -.if defined(WITH_SQUID_ARP_ACL) -CONFIGURE_ARGS+= --enable-arp-acl -.endif -.if defined(WITH_SQUID_PF) -CONFIGURE_ARGS+= --enable-pf-transparent -.if ${OSVERSION} < 502106 -IGNORE= pf available only in FreeBSD 5.3 and newer -.endif -.endif -# IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE, -# they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to -# 2003-06-27 (OSVERSION < 501101). -# -# Please see PR misc/44148 and the CVS log of src/include/Makefile for further -# information. -.if defined(WITH_SQUID_IPFILTER) -.if (${OSVERSION} > 500032 && ${OSVERSION} < 501101) -IGNORE= the IPFilter headers are not part of the base system -.else -CONFIGURE_ARGS+= --enable-ipf-transparent -.endif -.endif -.if defined(WITH_SQUID_FOLLOW_XFF) -CONFIGURE_ARGS+= --enable-follow-x-forwarded-for -.endif -.if defined(WITHOUT_SQUID_KQUEUE) -CONFIGURE_ARGS+= --disable-kqueue -.endif -.if defined(WITH_SQUID_LARGEFILE) -CONFIGURE_ARGS+= --with-large-files --enable-large-cache-files -.endif -.if defined(WITH_SQUID_STACKTRACES) -CONFIGURE_ARGS+= --enable-stacktraces -CFLAGS+= -g -STRIP= -.endif - -# Languages: -# -# If you do not define SQUID_LANGUAGES yourself, all available language files -# will be installed; the default language will be English. - -SQUID_LANGUAGES?= Armenian Azerbaijani Bulgarian Catalan Czech Danish \ - Dutch English Estonian Finnish French German Greek \ - Hebrew Hungarian Italian Japanese Korean Lithuanian \ - Polish Portuguese Romanian Russian-1251 Russian-koi8-r \ - Serbian Simplify_Chinese Slovak Spanish Swedish \ - Traditional_Chinese Turkish NewEnglish -SQUID_DEFAULT_LANG?= NewEnglish -CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ - --enable-default-err-language=${SQUID_DEFAULT_LANG} - -# Finally, add additional user specified configuration options: -CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} - -CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ - CPPFLAGS="${CPPFLAGS}"\ - LDFLAGS="${LDFLAGS}" - -PLIST_DIRS= etc/squid/icons libexec/squid -PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ - ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} - -.for d in ${SQUID_LANGUAGES} -PLIST_DIRS+= etc/squid/errors/${d} -PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} -.endfor -PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid - -post-patch: - @${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS}|g' \ - ${WRKSRC}/configure - @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ - -e 's|%%SQUID_GID%%|${SQUID_GID}|g' \ - -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/src/cf.data.pre - @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ - ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ - ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh - -pre-install: -# Prevent installation of .orig files by deleting them. - @${FIND} ${WRKSRC} -name '*.bak' -delete - @${FIND} ${WRKSRC} -name '*.orig' -delete - -pre-su-install: - @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL - -post-install: -.if !defined(NOPORTEXAMPLES) - @${MKDIR} ${EXAMPLESDIR} - ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} -.endif -.if defined(WITH_SQUID_PINGER) - ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ - ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger -.endif -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCSDIR} - cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} -.endif - @${SETENV} PKG_PREFIX=${PREFIX} \ - ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL - - @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" - @${ECHO_CMD} "" - @${CAT} ${PKGMESSAGE} - @${ECHO_CMD} "" - -.include <bsd.port.post.mk> |