aboutsummaryrefslogtreecommitdiff
path: root/www/squid30/files
diff options
context:
space:
mode:
Diffstat (limited to 'www/squid30/files')
-rw-r--r--www/squid30/files/follow_xff-2.5.patch411
-rw-r--r--www/squid30/files/follow_xff-configure.patch65
-rw-r--r--www/squid30/files/patch-aa11
-rw-r--r--www/squid30/files/patch-helpers-basic_auth-SMB-smb_auth.sh13
-rw-r--r--www/squid30/files/patch-src-cf.data.pre17
-rw-r--r--www/squid30/files/pf_from_ports.patch.in20
-rw-r--r--www/squid30/files/squid.sh86
7 files changed, 0 insertions, 623 deletions
diff --git a/www/squid30/files/follow_xff-2.5.patch b/www/squid30/files/follow_xff-2.5.patch
deleted file mode 100644
index b3096c6d5ba4..000000000000
--- a/www/squid30/files/follow_xff-2.5.patch
+++ /dev/null
@@ -1,411 +0,0 @@
-! This is a reduced part of the original follow-XFF patchset from
-! devel.squid-cache.org for use with the FreeBSD squid-2.5 port.
-Index: src/acl.c
---- src/acl.c 13 May 2003 02:14:12 -0000 1.43.2.16
-+++ src/acl.c 23 Nov 2003 14:20:12 -0000
-@@ -2001,6 +2001,11 @@
- cbdataLock(A);
- if (request != NULL) {
- checklist->request = requestLink(request);
-+#if FOLLOW_X_FORWARDED_FOR
-+ if (Config.onoff.acl_uses_indirect_client) {
-+ checklist->src_addr = request->indirect_client_addr;
-+ } else
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- checklist->src_addr = request->client_addr;
- checklist->my_addr = request->my_addr;
- checklist->my_port = request->my_port;
-Index: src/cf.data.pre
---- src/cf.data.pre 7 Nov 2003 03:14:30 -0000 1.49.2.46
-+++ src/cf.data.pre 23 Nov 2003 14:20:17 -0000
-@@ -2065,6 +2065,92 @@
- NOCOMMENT_END
- DOC_END
-
-+NAME: follow_x_forwarded_for
-+TYPE: acl_access
-+IFDEF: FOLLOW_X_FORWARDED_FOR
-+LOC: Config.accessList.followXFF
-+DEFAULT: none
-+DEFAULT_IF_NONE: deny all
-+DOC_START
-+ Allowing or Denying the X-Forwarded-For header to be followed to
-+ find the original source of a request.
-+
-+ Requests may pass through a chain of several other proxies
-+ before reaching us. The X-Forwarded-For header will contain a
-+ comma-separated list of the IP addresses in the chain, with the
-+ rightmost address being the most recent.
-+
-+ If a request reaches us from a source that is allowed by this
-+ configuration item, then we consult the X-Forwarded-For header
-+ to see where that host received the request from. If the
-+ X-Forwarded-For header contains multiple addresses, and if
-+ acl_uses_indirect_client is on, then we continue backtracking
-+ until we reach an address for which we are not allowed to
-+ follow the X-Forwarded-For header, or until we reach the first
-+ address in the list. (If acl_uses_indirect_client is off, then
-+ it's impossible to backtrack through more than one level of
-+ X-Forwarded-For addresses.)
-+
-+ The end result of this process is an IP address that we will
-+ refer to as the indirect client address. This address may
-+ be treated as the client address for access control, delay
-+ pools and logging, depending on the acl_uses_indirect_client,
-+ delay_pool_uses_indirect_client and log_uses_indirect_client
-+ options.
-+
-+ SECURITY CONSIDERATIONS:
-+
-+ Any host for which we follow the X-Forwarded-For header
-+ can place incorrect information in the header, and Squid
-+ will use the incorrect information as if it were the
-+ source address of the request. This may enable remote
-+ hosts to bypass any access control restrictions that are
-+ based on the client's source addresses.
-+
-+ For example:
-+
-+ acl localhost src 127.0.0.1
-+ acl my_other_proxy srcdomain .proxy.example.com
-+ follow_x_forwarded_for allow localhost
-+ follow_x_forwarded_for allow my_other_proxy
-+DOC_END
-+
-+NAME: acl_uses_indirect_client
-+COMMENT: on|off
-+TYPE: onoff
-+IFDEF: FOLLOW_X_FORWARDED_FOR
-+DEFAULT: on
-+LOC: Config.onoff.acl_uses_indirect_client
-+DOC_START
-+ Controls whether the indirect client address
-+ (see follow_x_forwarded_for) is used instead of the
-+ direct client address in acl matching.
-+DOC_END
-+
-+NAME: delay_pool_uses_indirect_client
-+COMMENT: on|off
-+TYPE: onoff
-+IFDEF: FOLLOW_X_FORWARDED_FOR && DELAY_POOLS
-+DEFAULT: on
-+LOC: Config.onoff.delay_pool_uses_indirect_client
-+DOC_START
-+ Controls whether the indirect client address
-+ (see follow_x_forwarded_for) is used instead of the
-+ direct client address in delay pools.
-+DOC_END
-+
-+NAME: log_uses_indirect_client
-+COMMENT: on|off
-+TYPE: onoff
-+IFDEF: FOLLOW_X_FORWARDED_FOR
-+DEFAULT: on
-+LOC: Config.onoff.log_uses_indirect_client
-+DOC_START
-+ Controls whether the indirect client address
-+ (see follow_x_forwarded_for) is used instead of the
-+ direct client address in the access log.
-+DOC_END
-+
- NAME: http_access
- TYPE: acl_access
- LOC: Config.accessList.http
-Index: src/client_side.c
---- src/client_side.c 2 Sep 2003 02:13:45 -0000 1.47.2.39
-+++ src/client_side.c 23 Nov 2003 14:20:22 -0000
-@@ -109,6 +109,11 @@
- #if USE_IDENT
- static IDCB clientIdentDone;
- #endif
-+#if FOLLOW_X_FORWARDED_FOR
-+static void clientFollowXForwardedForStart(void *data);
-+static void clientFollowXForwardedForNext(void *data);
-+static void clientFollowXForwardedForDone(int answer, void *data);
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- static int clientOnlyIfCached(clientHttpRequest * http);
- static STCB clientSendMoreData;
- static STCB clientCacheHit;
-@@ -177,10 +182,179 @@
- return ch;
- }
-
-+#if FOLLOW_X_FORWARDED_FOR
-+/*
-+ * clientFollowXForwardedForStart() copies the X-Forwarded-For
-+ * header into x_forwarded_for_iterator and passes control to
-+ * clientFollowXForwardedForNext().
-+ *
-+ * clientFollowXForwardedForNext() checks the indirect_client_addr
-+ * against the followXFF ACL and passes the result to
-+ * clientFollowXForwardedForDone().
-+ *
-+ * clientFollowXForwardedForDone() either grabs the next address
-+ * from the tail of x_forwarded_for_iterator and loops back to
-+ * clientFollowXForwardedForNext(), or cleans up and passes control to
-+ * clientAccessCheck().
-+ */
-+
-+static void
-+clientFollowXForwardedForStart(void *data)
-+{
-+ clientHttpRequest *http = data;
-+ request_t *request = http->request;
-+ if (Config.accessList.followXFF
-+ && httpHeaderHas(&request->header, HDR_X_FORWARDED_FOR))
-+ {
-+ request->x_forwarded_for_iterator = httpHeaderGetList(
-+ &request->header, HDR_X_FORWARDED_FOR);
-+ debug(33, 5) ("clientFollowXForwardedForStart: indirect_client_addr=%s XFF='%s'\n",
-+ inet_ntoa(request->indirect_client_addr),
-+ strBuf(request->x_forwarded_for_iterator));
-+ clientFollowXForwardedForNext(http);
-+ } else {
-+ /* not configured to follow X-Forwarded-For, or nothing to follow */
-+ debug(33, 5) ("clientFollowXForwardedForStart: nothing to do\n");
-+ clientFollowXForwardedForDone(-1, http);
-+ }
-+}
-+
-+static void
-+clientFollowXForwardedForNext(void *data)
-+{
-+ clientHttpRequest *http = data;
-+ request_t *request = http->request;
-+ debug(33, 5) ("clientFollowXForwardedForNext: indirect_client_addr=%s XFF='%s'\n",
-+ inet_ntoa(request->indirect_client_addr),
-+ strBuf(request->x_forwarded_for_iterator));
-+ if (strLen(request->x_forwarded_for_iterator) != 0) {
-+ /* check the acl to see whether to believe the X-Forwarded-For header */
-+ http->acl_checklist = clientAclChecklistCreate(
-+ Config.accessList.followXFF, http);
-+ aclNBCheck(http->acl_checklist, clientFollowXForwardedForDone, http);
-+ } else {
-+ /* nothing left to follow */
-+ debug(33, 5) ("clientFollowXForwardedForNext: nothing more to do\n");
-+ clientFollowXForwardedForDone(-1, http);
-+ }
-+}
-+
-+static void
-+clientFollowXForwardedForDone(int answer, void *data)
-+{
-+ clientHttpRequest *http = data;
-+ request_t *request = http->request;
-+ /*
-+ * answer should be be ACCESS_ALLOWED or ACCESS_DENIED if we are
-+ * called as a result of ACL checks, or -1 if we are called when
-+ * there's nothing left to do.
-+ */
-+ if (answer == ACCESS_ALLOWED) {
-+ /*
-+ * The IP address currently in request->indirect_client_addr
-+ * is trusted to use X-Forwarded-For. Remove the last
-+ * comma-delimited element from x_forwarded_for_iterator and use
-+ * it to to replace indirect_client_addr, then repeat the cycle.
-+ */
-+ const char *p;
-+ const char *asciiaddr;
-+ int l;
-+ struct in_addr addr;
-+ debug(33, 5) ("clientFollowXForwardedForDone: indirect_client_addr=%s is trusted\n",
-+ inet_ntoa(request->indirect_client_addr));
-+ p = strBuf(request->x_forwarded_for_iterator);
-+ l = strLen(request->x_forwarded_for_iterator);
-+
-+ /*
-+ * XXX x_forwarded_for_iterator should really be a list of
-+ * IP addresses, but it's a String instead. We have to
-+ * walk backwards through the String, biting off the last
-+ * comma-delimited part each time. As long as the data is in
-+ * a String, we should probably implement and use a variant of
-+ * strListGetItem() that walks backwards instead of forwards
-+ * through a comma-separated list. But we don't even do that;
-+ * we just do the work in-line here.
-+ */
-+ /* skip trailing space and commas */
-+ while (l > 0 && (p[l-1] == ',' || xisspace(p[l-1])))
-+ l--;
-+ strCut(request->x_forwarded_for_iterator, l);
-+ /* look for start of last item in list */
-+ while (l > 0 && ! (p[l-1] == ',' || xisspace(p[l-1])))
-+ l--;
-+ asciiaddr = p+l;
-+ if (inet_aton(asciiaddr, &addr) == 0) {
-+ /* the address is not well formed; do not use it */
-+ debug(33, 3) ("clientFollowXForwardedForDone: malformed address '%s'\n",
-+ asciiaddr);
-+ goto done;
-+ }
-+ debug(33, 3) ("clientFollowXForwardedForDone: changing indirect_client_addr from %s to '%s'\n",
-+ inet_ntoa(request->indirect_client_addr),
-+ asciiaddr);
-+ request->indirect_client_addr = addr;
-+ strCut(request->x_forwarded_for_iterator, l);
-+ if (! Config.onoff.acl_uses_indirect_client) {
-+ /*
-+ * If acl_uses_indirect_client is off, then it's impossible
-+ * to follow more than one level of X-Forwarded-For.
-+ */
-+ goto done;
-+ }
-+ clientFollowXForwardedForNext(http);
-+ return;
-+ } else if (answer == ACCESS_DENIED) {
-+ debug(33, 5) ("clientFollowXForwardedForDone: indirect_client_addr=%s not trusted\n",
-+ inet_ntoa(request->indirect_client_addr));
-+ } else {
-+ debug(33, 5) ("clientFollowXForwardedForDone: indirect_client_addr=%s nothing more to do\n",
-+ inet_ntoa(request->indirect_client_addr));
-+ }
-+done:
-+ /* clean up, and pass control to clientAccessCheck */
-+ debug(33, 6) ("clientFollowXForwardedForDone: cleanup\n");
-+ if (Config.onoff.log_uses_indirect_client) {
-+ /*
-+ * Ensure that the access log shows the indirect client
-+ * instead of the direct client.
-+ */
-+ ConnStateData *conn = http->conn;
-+ conn->log_addr = request->indirect_client_addr;
-+ conn->log_addr.s_addr &= Config.Addrs.client_netmask.s_addr;
-+ debug(33, 3) ("clientFollowXForwardedForDone: setting log_addr=%s\n",
-+ inet_ntoa(conn->log_addr));
-+ }
-+ stringClean(&request->x_forwarded_for_iterator);
-+ request->flags.done_follow_x_forwarded_for = 1;
-+ http->acl_checklist = NULL; /* XXX do we need to aclChecklistFree() ? */
-+ clientAccessCheck(http);
-+}
-+#endif /* FOLLOW_X_FORWARDED_FOR */
-+
- void
- clientAccessCheck(void *data)
- {
- clientHttpRequest *http = data;
-+#if FOLLOW_X_FORWARDED_FOR
-+ if (! http->request->flags.done_follow_x_forwarded_for
-+ && httpHeaderHas(&http->request->header, HDR_X_FORWARDED_FOR))
-+ {
-+ /*
-+ * There's an X-ForwardedFor header and we haven't yet tried
-+ * to follow it to find the indirect_client_addr. Follow it now.
-+ * clientFollowXForwardedForDone() will eventually pass control
-+ * back to us.
-+ *
-+ * XXX perhaps our caller should have called
-+ * clientFollowXForwardedForStart instead. Then we wouldn't
-+ * need to do this little dance transferring control over
-+ * there and then back here, and we wouldn't need the
-+ * done_follow_x_forwarded_for flag.
-+ */
-+ clientFollowXForwardedForStart(data);
-+ return;
-+ }
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- if (checkAccelOnly(http)) {
- /* deny proxy requests in accel_only mode */
- debug(33, 1) ("clientAccessCheck: proxy request denied in accel_only mode\n");
-@@ -325,6 +499,9 @@
- new_request->http_ver = old_request->http_ver;
- httpHeaderAppend(&new_request->header, &old_request->header);
- new_request->client_addr = old_request->client_addr;
-+#if FOLLOW_X_FORWARDED_FOR
-+ new_request->indirect_client_addr = old_request->indirect_client_addr;
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- new_request->my_addr = old_request->my_addr;
- new_request->my_port = old_request->my_port;
- new_request->flags.redirected = 1;
-@@ -3051,6 +3228,9 @@
- safe_free(http->log_uri);
- http->log_uri = xstrdup(urlCanonicalClean(request));
- request->client_addr = conn->peer.sin_addr;
-+#if FOLLOW_X_FORWARDED_FOR
-+ request->indirect_client_addr = request->client_addr;
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- request->my_addr = conn->me.sin_addr;
- request->my_port = ntohs(conn->me.sin_port);
- request->http_ver = http->http_ver;
-Index: src/delay_pools.c
---- src/delay_pools.c 19 Jun 2003 02:13:57 -0000 1.5.54.6
-+++ src/delay_pools.c 23 Nov 2003 14:20:23 -0000
-@@ -318,6 +318,11 @@
- r = http->request;
-
- memset(&ch, '\0', sizeof(ch));
-+#if FOLLOW_X_FORWARDED_FOR
-+ if (Config.onoff.delay_pool_uses_indirect_client) {
-+ ch.src_addr = r->indirect_client_addr;
-+ } else
-+#endif /* FOLLOW_X_FORWARDED_FOR */
- ch.src_addr = r->client_addr;
- ch.my_addr = r->my_addr;
- ch.my_port = r->my_port;
-*** src/structs.h.orig Sun Jun 26 12:45:58 2005
---- src/structs.h Sun Jun 26 12:48:45 2005
-***************
-*** 610,615 ****
---- 610,620 ----
- int accel_uses_host_header;
- int accel_no_pmtu_disc;
- int global_internal_static;
-+ #if FOLLOW_X_FORWARDED_FOR
-+ int acl_uses_indirect_client;
-+ int delay_pool_uses_indirect_client;
-+ int log_uses_indirect_client;
-+ #endif /* FOLLOW_X_FORWARDED_FOR */
- } onoff;
- acl *aclList;
- struct {
-***************
-*** 631,636 ****
---- 636,644 ----
- acl_access *reply;
- acl_address *outgoing_address;
- acl_tos *outgoing_tos;
-+ #if FOLLOW_X_FORWARDED_FOR
-+ acl_access *followXFF;
-+ #endif /* FOLLOW_X_FORWARDED_FOR */
- } accessList;
- acl_deny_info_list *denyInfoList;
- struct _authConfig {
-***************
-*** 1620,1625 ****
---- 1628,1638 ----
- unsigned int internal:1;
- unsigned int body_sent:1;
- unsigned int reset_tcp:1;
-+ #if FOLLOW_X_FORWARDED_FOR
-+ /* XXX this flag could be eliminated;
-+ * see comments in clientAccessCheck */
-+ unsigned int done_follow_x_forwarded_for;
-+ #endif /* FOLLOW_X_FORWARDED_FOR */
- };
-
- struct _link_list {
-***************
-*** 1666,1671 ****
---- 1679,1687 ----
- int max_forwards;
- /* these in_addr's could probably be sockaddr_in's */
- struct in_addr client_addr;
-+ #if FOLLOW_X_FORWARDED_FOR
-+ struct in_addr indirect_client_addr; /* after following X-Forwarded-For */
-+ #endif /* FOLLOW_X_FORWARDED_FOR */
- struct in_addr my_addr;
- unsigned short my_port;
- HttpHeader header;
-***************
-*** 1677,1682 ****
---- 1693,1703 ----
- const char *vary_headers; /* Used when varying entities are detected. Changes how the store key is calculated */
- BODY_HANDLER *body_reader;
- void *body_reader_data;
-+ #if FOLLOW_X_FORWARDED_FOR
-+ /* XXX a list of IP addresses would be a better data structure
-+ * than this String */
-+ String x_forwarded_for_iterator;
-+ #endif /* FOLLOW_X_FORWARDED_FOR */
- };
-
- struct _cachemgr_passwd {
diff --git a/www/squid30/files/follow_xff-configure.patch b/www/squid30/files/follow_xff-configure.patch
deleted file mode 100644
index 0cf30da6c147..000000000000
--- a/www/squid30/files/follow_xff-configure.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-!Simulate the autotools bootstrap of the follow-x-forwarded-for patchset.
-!
-!Beware that all line number informations in configure.log greater
-!than 2972 are offset by at least -29 (correcting all line numbers would have
-!bloated the patch by 92kB!)
---- include/autoconf.h.in.orig Sat Jan 18 02:46:11 2003
-+++ include/autoconf.h.in Thu Jun 24 13:19:07 2004
-@@ -291,6 +291,12 @@
- #define USE_IDENT 1
-
- /*
-+ * Compile in support for following X-Forwarded-For headers?
-+ * Enabled by default.
-+ */
-+#define FOLLOW_X_FORWARDED_FOR 1
-+
-+/*
- * If your system has statvfs(), and if it actually works!
- */
- #undef HAVE_STATVFS
---- configure.orig Tue Mar 2 10:18:14 2004
-+++ configure Tue Mar 2 10:18:56 2004
-@@ -222,6 +222,12 @@
- variance within an accelerator setup.
- Typically used together with other code
- that adds custom HTTP headers to the requests."
-+ac_help="$ac_help
-+ --enable-follow-x-forwarded-for
-+ Enable support for following the X-Forwarded-For
-+ HTTP header to try to find the IP address of the
-+ original or indirect client when a request has
-+ been forwarded through other proxies."
-
- # Initialize some variables set by options.
- # The variables have the same names as the options, with
-@@ -2966,6 +2972,29 @@
- fi
-
-
-+follow_xff=1
-+# Check whether --enable-follow-x-forwarded-for or --disable-follow-x-forwarded-for was given.
-+if test "${enable_follow_x_forwarded_for+set}" = set; then
-+ enableval="$enable_follow_x_forwarded_for"
-+ if test "$enableval" = "yes" ; then
-+ echo "follow X-Forwarded-For enabled"
-+ follow_xff=1
-+ fi
-+
-+fi
-+
-+if test $follow_xff = 1; then
-+ cat >> confdefs.h <<\EOF
-+#define FOLLOW_X_FORWARDED_FOR 1
-+EOF
-+
-+else
-+ cat >> confdefs.h <<\EOF
-+#define FOLLOW_X_FORWARDED_FOR 0
-+EOF
-+
-+fi
-+
- # Force some compilers to use ANSI features
- #
- case "$host" in
diff --git a/www/squid30/files/patch-aa b/www/squid30/files/patch-aa
deleted file mode 100644
index ec93f2dd3c39..000000000000
--- a/www/squid30/files/patch-aa
+++ /dev/null
@@ -1,11 +0,0 @@
---- include/squid_types.h.orig Mon Jul 7 00:45:26 2003
-+++ include/squid_types.h Mon Jul 7 00:48:39 2003
-@@ -66,8 +66,5 @@
- #if HAVE_SYS_TYPES_H
- #include <sys/types.h>
- #endif
--#if HAVE_SYS_BITYPES_H
--#include <sys/bitypes.h>
--#endif
-
- #endif /* SQUID_TYPES_H */
diff --git a/www/squid30/files/patch-helpers-basic_auth-SMB-smb_auth.sh b/www/squid30/files/patch-helpers-basic_auth-SMB-smb_auth.sh
deleted file mode 100644
index 8115ac0b7938..000000000000
--- a/www/squid30/files/patch-helpers-basic_auth-SMB-smb_auth.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-*** helpers/basic_auth/SMB/smb_auth.sh.orig Thu Feb 26 20:58:22 2004
---- helpers/basic_auth/SMB/smb_auth.sh Thu Feb 26 20:59:45 2004
-***************
-*** 17,22 ****
---- 17,24 ----
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-+ SAMBAPREFIX=${SAMBAPREFIX:-/usr/local/bin}
-+
- read DOMAINNAME
- read PASSTHROUGH
- read NMBADDR
diff --git a/www/squid30/files/patch-src-cf.data.pre b/www/squid30/files/patch-src-cf.data.pre
deleted file mode 100644
index ac5b4bd7ef61..000000000000
--- a/www/squid30/files/patch-src-cf.data.pre
+++ /dev/null
@@ -1,17 +0,0 @@
---- src/cf.data.pre.orig Fri Aug 20 16:23:18 2004
-+++ src/cf.data.pre Fri Aug 20 16:25:23 2004
-@@ -2396,12 +2396,12 @@
-
- NAME: cache_effective_user
- TYPE: string
--DEFAULT: nobody
-+DEFAULT: %%SQUID_UID%%
- LOC: Config.effectiveUser
- DOC_START
- If you start Squid as root, it will change its effective/real
- UID/GID to the user specified below. The default is to change
-- to UID to nobody. If you define cache_effective_user, but not
-+ to UID to %%SQUID_UID%%. If you define cache_effective_user, but not
- cache_effective_group, Squid sets the GID to the effective
- user's default group ID (taken from the password file) and
- supplementary group list from the from groups membership of
diff --git a/www/squid30/files/pf_from_ports.patch.in b/www/squid30/files/pf_from_ports.patch.in
deleted file mode 100644
index dd0617e41500..000000000000
--- a/www/squid30/files/pf_from_ports.patch.in
+++ /dev/null
@@ -1,20 +0,0 @@
---- configure.orig Thu Jun 10 12:22:06 2004
-+++ configure Thu Jun 10 13:31:53 2004
-@@ -3781,7 +3781,7 @@
- memory.h \
- mount.h \
- net/if.h \
-- net/pfvar.h \
-+ %%PF_INCLUDEDIR%%/net/pfvar.h \
- netdb.h \
- netinet/if_ether.h \
- netinet/in.h \
-@@ -7604,7 +7604,7 @@
- echo $ac_n "checking if PF header file is installed""... $ac_c" 1>&6
- echo "configure:7606: checking if PF header file is installed" >&5
- # hold on to your hats...
-- if test "$ac_cv_header_net_pfvar_h" = "yes"; then
-+ if test "$ac_cv_header_%%PF_AC_INCLUDEPATH%%_net_pfvar_h" = "yes"; then
- PF_TRANSPARENT="yes"
- cat >> confdefs.h <<\EOF
- #define PF_TRANSPARENT 1
diff --git a/www/squid30/files/squid.sh b/www/squid30/files/squid.sh
deleted file mode 100644
index a46c9dc7bf4d..000000000000
--- a/www/squid30/files/squid.sh
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-# --begin rcng
-# PROVIDE: squid
-# REQUIRE: NETWORKING SERVERS
-# BEFORE: DAEMON
-# KEYWORD: FreeBSD shutdown
-#
-# Note:
-# Set "squid_enable=yes" in either /etc/rc.conf, /etc/rc.conf.local or
-# /etc/rc.conf.d/squid to make this script actually do something. There
-# you can also set squid_chdir, squid_user, and squid_flags.
-#
-# Please see squid(8), rc.conf(5) and rc(8) for further details.
-#
-# --end rcng
-
-name=squid
-command=%%PREFIX%%/sbin/squid
-# --begin rcng
-extra_commands=reload
-reload_cmd="${command} -k reconfigure"
-# --end rcng
-stop_cmd="squid_stop"
-squid_chdir=${squid_chdir:-%%PREFIX%%/squid/logs}
-squid_enable=${squid_enable:-"NO"}
-squid_flags=${squid_flags-"-D"}
-squid_user=${squid_user:-%%SQUID_UID%%}
-default_config=%%PREFIX%%/etc/squid/squid.conf
-
-# --begin rcold
-squid_stop() {
- echo -n " ${name}"
- ${command} -k shutdown
- while ps -xcU ${squid_user} | grep -q squid; do
- sleep 2
- done
-}
-
-# --end rcold
-# --begin rcng
-squid_stop() {
- ${command} -k shutdown
- run_rc_command poll
-}
-
-. %%RC_SUBR%%
-rcvar=`set_rcvar`
-load_rc_config ${name}
-
-# squid(8) will not start if ${default_config} is not present so try
-# to catch that beforehand via ${required_files} rather than make
-# squid(8) crash.
-# If you remove the default configuration file make sure to add
-# '-f /path/to/your/squid.conf' to squid_flags
-
-if [ -z "${squid_flags}" ]; then
- required_files=${default_config}
-fi
-required_dirs=${squid_chdir}
-run_rc_command "$1"
-# --end rcng
-# --begin rcold
-case $1 in
-start)
- if [ -x "${command}" -a \
- \( -f "${default_config}" -o "${squid_flags}" \) ]; then
- echo -n " ${name}"
- (cd ${squid_chdir} && exec su -fm ${squid_user} -c \
- "${command} ${squid_flags}")
- fi
- ;;
-stop)
- if [ -x "${command}" ]; then
- ${stop_cmd}
- fi
- ;;
-*)
- echo "usage: ${0##*/} {start|stop}" >&2
- exit 64
- ;;
-esac
-exit 0
-# --end rcold
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-23 02:28:10 +0000