| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
| |
Approved by: asami
Notes:
svn path=/head/; revision=36564
|
|
|
|
|
|
|
| |
Submitted by: Kris Kennaway <kris@FreeBSD.org>
Notes:
svn path=/head/; revision=35455
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
Note from the author: in duplex mode black is not so intensive as
in normal mode. Maybe HP wants to prevent, that you don't see the
black of the other side of the page too much.
If somebody knows HP's algorithm, how to reduce the black, then
author would try to compensate it with some code...
Notes:
svn path=/head/; revision=35437
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- nonexistent -> NONEXISTENT
- Add USE_GMAKE
- portlint
- Fix usage of PREFIX/LOCALBASE
- Fix pkg/PLIST
PR: 21083
Submitted by: tkato@prontomail.ne.jp
Notes:
svn path=/head/; revision=32523
|
|
|
|
|
|
|
|
| |
PR: 20038
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
Notes:
svn path=/head/; revision=31937
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
my dual PIII-700 trying to figure out the sizes of the
primary and secondary caches. The sizes turned out to be
rather wrong (definetly true for the L2 cache, may be L1
is indeed 32Kb). Their algorithm seems bogus to me, but
most importantly, the obtained values are NOT USED
anywhere in the GhostScript code... One of the submitted
patches rips the "cache size" section from the genarch
entirely.
The attached modification and new patches also:
. replace the use of mktemp/fopen with mkstemp/fdopen
. modify the unix-gcc.mak so that there is no need for
GNU-make
PR: 20038
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
Notes:
svn path=/head/; revision=31936
|
|
|
|
|
|
|
| |
Submitted by: Hajimu UMEMOTO <ume@mahoroba.org>
Notes:
svn path=/head/; revision=30165
|
|
|
|
|
|
|
|
|
|
|
| |
reduce alignment problems. It is only slightly slower, but produces much
nicer print.
- Added $Id$
Obtained from: Harold Bower <HalBower@worldnet.att.net>
Notes:
svn path=/head/; revision=27883
|
|
|
|
|
|
|
|
|
|
|
| |
an enhanced PCL3 (PCL3+) driver
that was part of gs5 port and got lost in gs55 port.
Now it reappears in gs 6.01 ;-)
ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html
Notes:
svn path=/head/; revision=27791
|
|
|
|
| |
Notes:
svn path=/head/; revision=27422
|
|
|
|
| |
Notes:
svn path=/head/; revision=27421
|
|
|
|
|
|
|
| |
Submitted by: Anton Berezin <tobez@tobez.org>,Kimura Fuyuki <fuyuki@jade.dti.ne.jp>
Notes:
svn path=/head/; revision=27355
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gs6 compiles and runs now !!!
fixed BATCH mode
gs -h
Aladdin Ghostscript 6.01 (2000-03-17)
Copyright (C) 2000 Aladdin Enterprises, Menlo Park, CA. All rights reserved.
Usage: gs [switches] [file1.ps file2.ps ...]
Most frequently used switches: (you can use # in place of =)
-dNOPAUSE no pause after page | -q `quiet', fewer messages
-g<width>x<height> page size in pixels | -r<res> pixels/inch resolution
-sDEVICE=<devname> select device | -dBATCH exit after last file
-sOutputFile=<file> select output file: - for stdout, |command for pipe,
embed %d or %ld for page #
Input formats: PostScript PostScriptLevel1 PostScriptLevel2 PDF
Available devices:
appledmp iwhi iwlo iwlq hl7x0 bj10e bj200 bjc600 bjc800 lbp8 lips3 m8510
coslw2p coslwxl uniprint lj250 declj250 ap3250 epson eps9mid eps9high
lp8000 lq850 epsonc st800 stcolor lp2563 dnj650c deskjet djet500 cdeskjet
djet500c cdjcolor cdjmono cdj500 cdj550 cdj670 cdj850 cdj880 cdj890
cdj1600 laserjet ljetplus ljet2p ljet3 ljet3d ljet4 ljet4d lj4dith cljet5
cljet5c cljet5pr lj5mono lj5gray pj pjetxl pjxl paintjet pjxl300 pxlmono
bbox pxlcolor ibmpro jetp3852 imagen fs600 lxm5700m cp50 necp6 oce9050
oki182 okiibm r4081 sj48 bmpmono bmpgray bmp16 bmp256 bmp16m bmp32b
bmpsep1 bmpsep8 ccr cgmmono cgm8 cgm24 cif dfaxhigh dfaxlow faxg3 faxg32d
faxg4 miff24 inferno jpeg jpeggray mgrmono mgrgray2 mgrgray4 mgrgray8
mgr4 mgr8 pcxmono pcxgray pcx16 pcx256 pcx24b pcxcmyk pdfwrite bit bitrgb
bitcmyk plan9bm pbm pbmraw pgm pgmraw pgnm pgnmraw pnm pnmraw ppm ppmraw
pkm pkmraw pksm pksmraw pngmono pnggray png16 png256 png16m psmono psgray
psrgb pswrite epswrite sgirgb sunhmono t4693d2 t4693d4 t4693d8 tek4696
tiffcrle tiffg3 tiffg32d tiffg4 tiff12nc tiff24nc tifflzw tiffpack x11
x11alpha x11cmyk x11cmyk2 x11cmyk4 x11cmyk8 x11gray2 x11gray4 x11mono
x11rg16x x11rg32x nullpage
Search path:
. : /usr/local/share/ghostscript/6.01/lib :
/usr/local/share/ghostscript/fonts
For more information, see /usr/local/share/ghostscript/6.01/doc/Use.htm.
Report bugs to bug-gs@aladdin.com, using the form in Bug-form.htm.
Notes:
svn path=/head/; revision=27049
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- make configure script work (Louis)
- make configure.batch script work (Andreas)
- extract contributed HP8XX driver in ${WRKSRC}/src
- make png driver compile (add $(PREFIX)/include to XINCLUDE variable)
Dunno, if this will be the last round of cleanups...
Submitted by: "Louis A. Mamakos" <louie@TransSys.COM>
Notes:
svn path=/head/; revision=27046
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before the new patch gs build fine, but didn't
include the printer devices included with configuration script.
After fixing this it refuses to build.
Any help appreciated.
Now you have the last version as I to help me to fix the mess.
Sorry folks ...
Notes:
svn path=/head/; revision=27036
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
additional changes by me:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
reviewed all informations in makefiles and driver docu
to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
Driver is still in developement. There is a newer 1.4 beta version
available, but this version is recommended by the author.
http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
Supported are the following models:
HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
printer: Epson Stylus Color 740
mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
#
printer: Epson LQ-1170
mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
release
- apsfilter will be updated later
Submitted by: "Alec Wolman" <wolman@cs.washington.edu>
Notes:
svn path=/head/; revision=27030
|
|
|
|
| |
Notes:
svn path=/head/; revision=25767
|
|
|
|
|
|
|
|
|
|
|
| |
export restrictions)
- tar -> TAR
PR: 16667
Submitted by: KATO Tsuguro
Notes:
svn path=/head/; revision=25763
|
|
|
|
|
|
|
| |
Submitted by: Dominik Brettnacher <domi@saargate.de>
Notes:
svn path=/head/; revision=23345
|
|
|
|
|
|
|
|
| |
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
PR: ports/15052
Notes:
svn path=/head/; revision=23338
|
|
|
|
|
|
|
|
| |
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
Notes:
svn path=/head/; revision=21157
|
|
|
|
| |
Notes:
svn path=/head/; revision=21143
|
|
|
|
|
|
|
| |
build but at least it will have a better chance.
Notes:
svn path=/head/; revision=20221
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FWIW, checkout of these things took 5+hrs, staying on the local
.freebsd.org net w/o hitting the 'net at all.
As promised,
$ time cvs ci
real 67m51.701s
user 0m1.250s
sys 0m5.345s
Notes:
svn path=/head/; revision=19803
|
|
|
|
|
|
|
|
|
| |
fixed install target and PLIST file.
Reported by: Marko Schuetz <marko@ki.informatik.uni-frankfurt.de>
Notes:
svn path=/head/; revision=18829
|
|
|
|
|
|
|
| |
(add WWW:)
Notes:
svn path=/head/; revision=18429
|
|
|
|
| |
Notes:
svn path=/head/; revision=16275
|
|
|
|
| |
Notes:
svn path=/head/; revision=16244
|
|
|
|
| |
Notes:
svn path=/head/; revision=16030
|
|
|
|
| |
Notes:
svn path=/head/; revision=15814
|
|
|
|
| |
Notes:
svn path=/head/; revision=15669
|
|
|
|
|
|
|
|
|
|
|
| |
ghostscript-fonts-std-5.50.tar.gz points to
the newer font
ghostscript-fonts-std-5.10a.tar.gz points to
^-- !
in another directory on the ftp server.
Notes:
svn path=/head/; revision=15088
|
|
|
|
| |
Notes:
svn path=/head/; revision=15087
|
|
|
|
| |
Notes:
svn path=/head/; revision=15009
|
|
|
|
| |
Notes:
svn path=/head/; revision=14938
|
|
|
|
|
|
|
| |
Submitted by: Zach Heilig <zach@gaffaneys.com>
Notes:
svn path=/head/; revision=13094
|
|
|
|
| |
Notes:
svn path=/head/; revision=12653
|
|
|
|
|
|
|
|
| |
The version change produced a symlink in gs source directory
which pointed to an nonexistent directory under libpng port.
Notes:
svn path=/head/; revision=11939
|
|
|
|
| |
Notes:
svn path=/head/; revision=11662
|
|
|
|
|
|
|
| |
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
Notes:
svn path=/head/; revision=11560
|
|
|
|
| |
Notes:
svn path=/head/; revision=11267
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Since the author decided to put a version number into his archive,
we can now safely fetch the file from his site.
- patch-ad is useless now
- updated the configure and configure.batch script, to show all possible
drivers
- install hp850 drivers license and readme file in the gs doc dir
- update the DESCR file, mention the two add on packages in this port
- The new driver supports the following additional printers:
Support for HP DeskJet 670, 690, 850, 855, 870, 890, 1100 and 1600,
See announcement on http://bonk.ethz.ch/hp850/hp850.html
Please note, that some of the drivers have certain restrictions
and produce huge output files ... Please read the release notes !!!
The author makes suggestions on his website, what driver to choose
if you need a fast printout, see
http://bonk.ethz.ch/hp850/hp850-readme.1.3.html
Notes:
svn path=/head/; revision=11254
|
|
|
|
|
|
|
| |
Submitted by: "Geo. D. Wood" <gw@doitnow.com>
Notes:
svn path=/head/; revision=11179
|
|
|
|
|
|
|
|
|
| |
for the screen. shortened it a bit.
PR: closes 6724
Submitted by: Jens Schweikhardt <schweikh@noc.dfn.de>
Notes:
svn path=/head/; revision=11125
|
|
|
|
| |
Notes:
svn path=/head/; revision=10593
|
|
|
|
| |
Notes:
svn path=/head/; revision=10384
|
|
|
|
| |
Notes:
svn path=/head/; revision=10004
|
|
|
|
| |
Notes:
svn path=/head/; revision=9541
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
From: Jin Guojun (ITG staff) <jin@george.lbl.gov>
BJC-240 in color mode is supported as well by the bjc600 and bjc800 driver.
BJC-240 b&w is supported by bj200. Added this to configure dialogue.
From: Luigi Rizzo <luigi@labinfo.iet.unipi.it>:
Support for encrypted PDF files by replacing pdf_sec.ps with the
free and legal version from:
http://www.ozemail.com.au/~geoffk/pdfencrypt/pdf_sec.ps
Deceided to update the pathnames of font files for easier
maintenance, because they revamped their ftp archive structure
to "5.10/files".
Submitted by: various people
Notes:
svn path=/head/; revision=9434
|
|
|
|
| |
Notes:
svn path=/head/; revision=9279
|