aboutsummaryrefslogtreecommitdiff
path: root/x11/kdebase4-runtime
Commit message (Collapse)AuthorAgeFilesLines
* (1) Add new variable, XFREE86_VERSION, to specify which version ofSatoshi Asami2000-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFree86 (3 or 4) to depend to when USE_XLIB is set. XFREE86_VERSION defaults to 3 for now, but adventurous users can override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB will add a dependency to x11/XFree86; when it is set to 4, the dependency will be to x11/XFree86-4-libraries. When XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS hacks to avoid messing with XFree86 are turned off. Since XFree86 version 4 includes some software that used to be separate ports, when XFREE86_VERSION=3 the following variables are provided: USE_DGS LIB_DEPENDS on x11/dgs USE_FREETYPE LIB_DEPENDS on print/freetype USE_MESA LIB_DEPENDS on graphics/Mesa3 USE_XPM LIB_DEPENDS on graphics/xpm When XFREE86_VERSION=4, these variables have no effect. The LIB_DEPENDS in the tree for the above four ports have all been converted to the USE_* counterparts. For your information, this is the count of the number of ports: USE_DGS 0 USE_FREETYPE 16 USE_MESA 36 USE_XPM 236 There is a new variable, XAWVER, which is set to 6 when XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also passed to PLIST_SUB so ports that build Xaw based shared libraries can use this variable to substitute the shlib version number. There is also a provision of using a separate mtree file for XFREE86_VERSION=4, but that part is not enabled yet. Reviewed by: the ports list Tested by: make index (XFREE86_VERSION=3 only) (2) Add hebrew to list of valid categories. Submitted by: nbm Notes: svn path=/head/; revision=31272
* Update to 20000724A (custom-rolled snapshot). Rejoice, because nowWill Andrews2000-07-293-457/+746
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Konqueror can load HTML documents, KOffice works semi-well, and KDE2 in general seems less buggy. Only kdeutils was left out of this mega-update. However, it should return soon. :-) The massive reduction in patches is mostly the result of using perl regex replacement. This reduces the amount of time it will take in the future to upgrade these ports, and load on the repository. QT 2.2.0beta0 (aka qt-copy) is officially enabled for the express purpose of allowing KDE2 to compile. It is available in the qt22 port. Additionally, GIF support is re-enabled in both Qt2 ports, so that people can now read GIF images. GIF support is enabled through an internal GIF reader in Qt, and requires no patented libraries. Special effort was made to ensure that people do not install both qt21 and qt22 ports at the same time. I'd like to take a moment to thank the following people for their help: Alex Zepeda <jazepeda@pacbell.net>, Stephan Kulow <coolo@kde.org>, Harri Porten <porten@kde.org>, Waldo Bastian <waba@kde.org>, Marc G. Fournier <scrappy@hub.org>, Arun Sharma <adsharma@sharmas.dhs.org>, Matthias Hoelzer-Kluepfel <mhk@caldera.de>, and many others. Over 150 hours of hard work, testing, etc. were put into this update. Another couple hundred of hours were spent by CPUs trying to compile this behemoth. :-> Special thanks to: Physics Computer Network @ Purdue staff, especially C. Stephen Gunn <csg@physics.purdue.edu>, for giving me access to an extremely fast machine for doing test builds (it performed 12 full builds of the entire suite in the last 7 days). PR: 18838 Submitted by: Arun Sharma <adsharma@sharmas.dhs.org> Approved by: imura, asami Notes: svn path=/head/; revision=31093
* Mark these BROKEN, they don't compile/run properly.Satoshi Asami2000-07-191-0/+2
| | | | | | | Submitted by: maintainer Notes: svn path=/head/; revision=30901
* Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in theSatoshi Asami2000-06-161-1/+1
| | | | | | | | | | | | previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.) Line up the rhs of variable assignments nicely. Remove a couple of extra whitespaces while I'm here. Suggested by: sobomax Notes: svn path=/head/; revision=29651
* Fourth round of INSTALLS_SHLIBS conversion.Maxim Sobolev2000-06-162-2/+1
| | | | Notes: svn path=/head/; revision=29630
* Mark FORBIDDEN due to local buffer overflow in kdesud yieldingKris Kennaway2000-06-051-0/+2
| | | | | | | | | gid nogroup (yeah, it's still a security hole) Submitted by: Noir Sin <noir@gsu.linux.org.tr> (via Bugtraq) Notes: svn path=/head/; revision=29205
* Fix for RELENG_3 systems. Also remove unnecessary USE_XLIB (because it'sWill Andrews2000-05-241-2/+0
| | | | | | | included by qt2) and jpeg.9 dependencies. Notes: svn path=/head/; revision=28718
* Update to KDEBASE 1.90 (aka KDE2 beta).Will Andrews2000-05-163-2404/+1748
| | | | | | | Repo-copy by: asami Notes: svn path=/head/; revision=28499
* Update to use PORTNAME/PORTVERSIONChris Piazza2000-04-131-2/+2
| | | | Notes: svn path=/head/; revision=27497
* Doing KDE style mtree in kdelibs.R. Imura2000-03-251-23/+0
| | | | | | | OK'd by: will Notes: svn path=/head/; revision=27037
* Bump shlib versions of kdelibs11 and kdesupport11.Satoshi Asami2000-02-241-2/+2
| | | | Notes: svn path=/head/; revision=26244
* Remove giflib dependence.R. Imura2000-02-151-2/+1
| | | | | | | | | | | Only changed giflib -> libungif in kdegraphics. They realy do NOT want libgif, and do NOT use libgif anywhere. Some ports are checking its existence in configure, but they are nonsense at all!! Notes: svn path=/head/; revision=25853
* Oops... my last change about kdm had no effect at all.R. Imura2000-01-141-1/+2
| | | | | | | | | | | | Hope this will realy fix the problem and I add USE_XLIB. What's the problem: configure script checks if $PATH/X exists and if so define XBINDIR as $PATH. In kdebase's package, XBINDIR is hardly embedded in kdm and it doesn't work. In last modification, I added $X11BASE/bin to $PATH in Makefile... Notes: svn path=/head/; revision=24743
* It must fix a package's kdm problem and screenlock's problem.R. Imura1999-12-071-2/+15
| | | | | | | PR: 14205, 14188 Notes: svn path=/head/; revision=23631
* Remove CD-ROM.kdelnk for the fourth time.Satoshi Asami1999-09-221-1/+0
| | | | Notes: svn path=/head/; revision=21893
* Update to KDE-1.1.2Stefan Eßer1999-09-183-5/+320
| | | | Notes: svn path=/head/; revision=21711
* The version number of libgif.so has changed to 5.Steve Price1999-09-181-1/+1
| | | | Notes: svn path=/head/; revision=21701
* $Id$ -> $FreeBSD$Peter Wemm1999-08-311-1/+1
| | | | Notes: svn path=/head/; revision=21147
* Forget about ${PREFIX}/include/giflib.Thomas Gellekum1999-05-271-3/+2
| | | | Notes: svn path=/head/; revision=19018
* Categories "misc kde" should be "x11 kde".Satoshi Asami1999-05-101-2/+2
| | | | | | | Reported by: imura@cs.titech.ac.jp Notes: svn path=/head/; revision=18767
* Remove one file that is not installed. I'm not sure if this is theSatoshi Asami1999-05-051-1/+0
| | | | | | | correct fix but at least this will get the package build going again. Notes: svn path=/head/; revision=18489
* Upgrade KDE to Release 1.1.1.Stefan Eßer1999-05-033-26/+67
| | | | Notes: svn path=/head/; revision=18441
* Now that gettext includes a shared library, dependencies shouldJacques Vidrine1999-03-191-4/+3
| | | | | | | | | | use it in LIB_DEPENDS. PR: ports/10647 Submitted by: Jeremy Lea <reg@shale.csir.co.za> Notes: svn path=/head/; revision=17285
* Portlint.Satoshi Asami1999-02-281-3/+2
| | | | Notes: svn path=/head/; revision=16953
* MASTER_SITE_SUBDIR was broken. My choices in fixing were either go withDavid E. O'Brien1999-02-282-3/+5
| | | | | | | GZIP or BZIP2 distfiles. I went with BZIP2. Notes: svn path=/head/; revision=16923
* Add build and run depends to msgfmt (gettext).Satoshi Asami1999-02-131-1/+3
| | | | Notes: svn path=/head/; revision=16714
* Remove one file that does not exist.Satoshi Asami1999-02-131-1/+0
| | | | Notes: svn path=/head/; revision=16713
* Remove extra argument to "configure" that had been committed by accident.Stefan Eßer1999-02-081-3/+1
| | | | Notes: svn path=/head/; revision=16564
* Upgrade to KDE 1.1 RELEASE.Stefan Eßer1999-02-083-11/+45
| | | | Notes: svn path=/head/; revision=16563
* Upgrade to KDE-1.1pre2 ...Stefan Eßer1999-02-063-68/+182
| | | | Notes: svn path=/head/; revision=16552
* Adjust port Makefiles to new EXTRACT_* variable defaults. See log ofSatoshi Asami1999-02-031-6/+2
| | | | | | | | | | | | | | | | | | | | | | bsd.port.mk rev. 1.304 for details on the change. The fix here is one of the following. (1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining EXTRACT_* commands. (2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously calling the "tar" command (i.e., arguments like "-xzf" are spelled out). (3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS}, add ${EXTRACT_AFTER_ARGS} to the command line as well. (4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS is set, define the other two too. Notes: svn path=/head/; revision=16518
* Remove a non-existent file so this thing packages.Satoshi Asami1999-01-211-1/+0
| | | | Notes: svn path=/head/; revision=16233
* ${RM} is not defined outside bsd.port.mk, so pass it down in MAKE_ENV.Satoshi Asami1999-01-211-2/+2
| | | | Notes: svn path=/head/; revision=16232
* There are a total of 5 locale specific message files, that can not beStefan Eßer1999-01-101-5/+0
| | | | | | | | | installed. Until this is fixed in the KDE sources, those files have to be removed from the Makefiles that deal with them and from the PLIST of this port ... Notes: svn path=/head/; revision=15989
* Make dependency lines point to right directories -- they were stillSatoshi Asami1999-01-081-2/+2
| | | | | | | using the old names (without "11"). Notes: svn path=/head/; revision=15927
* Upgrade to the first pre-release of KDE 1.1.Stefan Eßer1999-01-073-52/+597
| | | | | | | | | | | | | | This port requireat least s version 1.41 of the Qt library. There will be an error reported by configure, if only an earlier version is found, but no automatic port dependency exists (i.e. the x11-toolkits/qt141 port has to be manually built and installed). There may still be a problem with a missing -lXext in the kdesupport port. This will be taken care of during the next few days, if the problem still exists ... Notes: svn path=/head/; revision=15901
* Mark these broken while Stefan works on an upgrade.Satoshi Asami1999-01-061-1/+3
| | | | Notes: svn path=/head/; revision=15881
* Add dependency to xpm.Satoshi Asami1998-12-011-2/+3
| | | | Notes: svn path=/head/; revision=14973
* Activate utmp, wtmp and lastlog support for kvt.Jun Kuriyama1998-10-101-55/+2
| | | | | | | | | | | | | | Submitted by: "Andrew J. Korty" <ajk@physics.purdue.edu> Forwarded by: Stefan Esser <se@mi.uni-koeln.de> BTW, this port installs some files missing in PLIST depending on what program is installed on the system. Are there any hacks for this? # I deleted @dirrm's which are included in kdelibs. Notes: svn path=/head/; revision=13843
* ElfifyBrian Somers1998-10-011-9/+7
| | | | Notes: svn path=/head/; revision=13581
* Mark all KDE ports BROKEN for ELF.Justin M. Seger1998-09-301-1/+3
| | | | Notes: svn path=/head/; revision=13545
* giflib is now converted to ELF so remove regexp support.Steve Price1998-09-191-2/+2
| | | | Notes: svn path=/head/; revision=13232
* jpeg is now converted to ELF so change LIB_DEPENDS lines accordingly.Satoshi Asami1998-09-151-2/+2
| | | | | | | | (Note, since the shlib major didn't change this just removes the regexp support.) Notes: svn path=/head/; revision=13147
* Replace qt dependencies with USE_QT.Satoshi Asami1998-08-121-4/+3
| | | | | | | | (Also, net/licq/Makefile: No need to define both HAS_CONFIGURE and GNU_CONFIGURE) Notes: svn path=/head/; revision=12469
* Fix up dependencies for ports that moved into the x11-toolkits category.Satoshi Asami1998-08-071-3/+3
| | | | Notes: svn path=/head/; revision=12335
* Change dependencies to accept Qt-1.33 if present,Stefan Eßer1998-07-231-3/+3
| | | | | | | but to build Qt-1.40 if no compiled Qt library can be found. Notes: svn path=/head/; revision=12083
* Fix MASTER_SITE_SUBDIR.Stefan Eßer1998-07-131-2/+2
| | | | Notes: svn path=/head/; revision=11908
* Upgrade to KDE Release 1.0Stefan Eßer1998-07-133-100/+275
| | | | | | | Partially based on patches prepared by Thomas Gellekum. Notes: svn path=/head/; revision=11906
* Change JPEG shared library number to 9. This is to make sure that everyoneJustin M. Seger1998-05-041-2/+2
| | | | | | | | | | | | installs the version of the port that uses shared library number 9 and the LIBRARY_VERSION set to the default. Normally this is against our policy (bumping the version number for minor things), however due to the major problems caused with the upgrade, Satoshi and I decided that this was best. Approved by: asami Notes: svn path=/head/; revision=10846
* Update to KDE Beta4.Stefan Eßer1998-04-253-26/+325
| | | | Notes: svn path=/head/; revision=10673
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 22:32:12 +0000