From 486861186b001d08f8bb4dab1f9234a8f2c75bfe Mon Sep 17 00:00:00 2001 From: Alexey Dokuchaev Date: Wed, 23 Jul 2008 09:53:39 +0000 Subject: Usual round of wordsmithing: - Consistency and spelling corrections - Lots of whitespace fixes to improve readability - Reword couple of phases for better English - Kill EOF whitespace --- UPDATING | 502 ++++++++++++++++++++++++++++++++------------------------------- 1 file changed, 256 insertions(+), 246 deletions(-) (limited to 'UPDATING') diff --git a/UPDATING b/UPDATING index 42b014f8f11d..2117349a3183 100644 --- a/UPDATING +++ b/UPDATING @@ -10,8 +10,8 @@ upgrades. AFFECTS: users of net/freenet6 Author: Edwin Groothuis - Please note that there has been a major update of this port (From - vesion 2.x to 5.x) and that the name of the binaries and configuration + Please note that there has been a major update of this port (from + version 2.x to 5.x) and that the name of the binaries and configuration files has changed from "tpsc" to "gw6c". The configuration files have to be copied from ${PREFIX}/share/examples/freenet6 to ${PREFIX}/etc again. @@ -23,9 +23,9 @@ upgrades. GPRename configuration files now live ~/.config/gprename instead of ~/, to upgrade use: - % mkdir -p ~/.config/gprename - % mv ~/.gprename ~/.config/gprename/gprename - % mv ~/.gprename_log ~/.config/gprename/gprename_log + % mkdir -p ~/.config/gprename + % mv ~/.gprename ~/.config/gprename/gprename + % mv ~/.gprename_log ~/.config/gprename/gprename_log 20080717: AFFECTS: Users of devel/anjuta @@ -34,8 +34,8 @@ upgrades. Anjuta's neon dependency has been switched from neon26 to neon28. The two are incompatible, so you will need to do the following to upgrade: - portupgrade -o www/neon28 neon26 - portupgrade anjuta + portupgrade -o www/neon28 neon26 + portupgrade anjuta 20080714: AFFECTS: Users of www/squid @@ -88,7 +88,7 @@ upgrades. 32 bit "qemu" executable on amd64. If you upgrade qemu-devel with the KQEMU knob on, you have to - # pkg_delete kqemu-kmod-1\* + # pkg_delete kqemu-kmod-1\* the old kqemu version first if it is installed. @@ -110,7 +110,7 @@ upgrades. will need to run update-mime-database to update your local Mime Types caches. - $ update-mime-database ~/.local/share/mime/ + $ update-mime-database ~/.local/share/mime/ 20080702: AFFECTS: users of irc/ratbox-services @@ -148,12 +148,12 @@ upgrades. neon26. You should upgrade neon library before subversion with the command: - # portupgrade -o www/neon28 neon26 + # portupgrade -o www/neon28 neon26 Also, if you use special subversion port with bindings, you should upgrade your port to clean subversion port with - # portupgrade -o devel/subversion subversion-\* + # portupgrade -o devel/subversion subversion-\* and install needed bindings (p5-subversion, py-subversion and/or ruby-subversion) after that. @@ -171,15 +171,15 @@ upgrades. These changes require that all dependent ports be updated. You can do this in one of two ways: - # portmaster pixman\* - # portmaster \*cairo\* - # portmaster -r poppler-0.\* + # portmaster pixman\* + # portmaster \*cairo\* + # portmaster -r poppler-0.\* - or + or: - # pkgdb -Ff - # portupgrade pixman\* \*cairo\* - # portupgrade -r poppler-0.\* + # pkgdb -Ff + # portupgrade pixman\* \*cairo\* + # portupgrade -r poppler-0.\* 20080627: AFFECTS: users of x11-drivers/xf86-video-ati @@ -199,7 +199,7 @@ upgrades. AFFECTS: users of science/gramps AUTHOR: Anders Troback - Before you upgrade from 2.x to 3.x you need to export your existing + Before you upgrade from 2.x to 3.x you need to export your existing databases to a GRAMPS XML file. After the upgrade you can import them into the new version. @@ -241,7 +241,7 @@ upgrades. 20080622: AFFECTS: users of devel/subversion, subversion-devel and subversion-freebsd - with apr from www/apache22 + with apr from www/apache22 AUTHOR: Clement Laforet apr and apr-util bundled with apache 2.2.9 have been upgraded to 1.3.x, so @@ -272,8 +272,8 @@ upgrades. The Opera has been updated from 9.2x to 9.5x. A lot of things have been changed such as keyboard shortcuts[1]; new storage and indexing formats mail and feeds; new search.ini; probably more that I have missed. I do - not know if the keyboard shortcuts and search.ini will be overwrite. The - mail and feeds will be asked to convert to new format in start up. + not know if the keyboard shortcuts and search.ini will be overwritten. The + mail and feeds will be asked to convert to new format during start up. Warning there is no way to downgrade back to old format. Be sure to view the Changelog[2]. @@ -283,9 +283,9 @@ upgrades. It is probably best for you to back up your linux-opera directory in case until you have no problem with new Opera for a while. Also, you might have to re-configure search and keyboard shortcuts if these are - overwrote. + overwritten: - # cp -Rp ~/.linux-opera ~/.linux-opera-bak + # cp -Rp ~/.linux-opera ~/.linux-opera-bak If you are seeing an error of undefined symbol related with GTK+. It is because it needs newer linux-gtk2 that ports doesn't have. You can enter @@ -319,15 +319,15 @@ upgrades. volume control tool to PulseAudio. 20080605: - AFFECTS: users of devel/gettext (ie: YOU) + AFFECTS: users of devel/gettext (i.e.: YOU) AUTHOR: ade@FreeBSD.org As a result of the upgrade to gettext-0.17, the shared library version of libintl has changed, so you will need to rebuild all ports that depend on gettext: - # portupgrade -rf gettext - # portmaster -r gettext\* + # portupgrade -rf gettext + # portmaster -r gettext\* Given the scope and sheer number of dependent ports, it may be more advisable to simply blow away all existing install ports (after @@ -341,7 +341,7 @@ upgrades. directories are changed. So you should reinstall all ports depending on this one. Run something like: - # portupgrade -fr emacs + # portupgrade -fr emacs 20080601: AFFECTS: users of www/ikiwiki @@ -397,7 +397,7 @@ upgrades. upgrading multimedia/smplayer to version 0.6.0 or higher. 20080513: - AFFECTS: users of secutity/amavisd-new + AFFECTS: users of security/amavisd-new AUTHOR: scheidell@secnap.net Amavisd-new 2.6.0 introduces several incompatibilities with prior versions. @@ -517,13 +517,13 @@ upgrades. separate ports to allow non-GNOME users to install tracker without pulling in GNOME components. To upgrade please use the directions below. - portmaster users: - portmaster -o sysutils/tracker-client tracker - portmaster -u sysutils/tracker + Portmaster users: + portmaster -o sysutils/tracker-client tracker + portmaster -u sysutils/tracker - portupgrade users: - portupgrade -o sysutils/tracker-client tracker - portupgrade -u sysutils/tracker + Portupgrade users: + portupgrade -o sysutils/tracker-client tracker + portupgrade -u sysutils/tracker 20080405: AFFECTS: users and maintainers of ports that depends of databases/sqlite3 @@ -566,7 +566,8 @@ upgrades. of www/openx. 3. Copy your banner images from phpadsnew/www/images to openx/www/images 4. Access openx on your browser and follow the instructions for upgrading. - 5. When you are satisfied everthing is working properly remove www/phpadsnew + 5. When you are satisfied with everything working properly you can remove + www/phpadsnew. 20080326: AFFECTS: users of emulators/linux_base-f8 @@ -605,7 +606,7 @@ upgrades. Portmaster users: # pkg_delete -f gnome-applets\* totem\* gnome-control-center\* \ - gnome-keyring-manager\* + gnome-keyring-manager\* # portmaster -a Be sure to read in our known issues and solutions: @@ -614,7 +615,7 @@ upgrades. 20080318: AFFECTS: users of audio/gnump3d - AUTHOR: jadawin@FreeBSD.org + AUTHOR: jadawin@FreeBSD.org The layout of gnump3d 3.0 is changed, please read the documents and the manual pages of gnump3d. @@ -655,10 +656,10 @@ upgrades. AFFECTS: users of security/nmapfe AUTHOR: miwi@FreeBSD.org - nmapfe has been renamed to zenmap upstream. The port has also been - renamed. If you haven't already installed nmapfe, you need to: + nmapfe has been renamed to zenmap upstream. The port has also been + renamed. If you haven't already installed nmapfe, you need to: - portupgrade -o security/zenmap nmapfe\* + portupgrade -o security/zenmap nmapfe\* 20080313: AFFECTS: users of mail/ezmlm-web @@ -671,16 +672,16 @@ upgrades. AFFECTS: users of x11-wm/enlightenment-devel, x11/ecore and grephics/evas AUTHOR: stas@FreeBSD.org - Evas and ecore ports have been splitted to separate modules to simplify + Evas and ecore ports have been split to separate modules to simplify dependency tracking. Thus, portupgrade in many cases won't be able to correctly update these ports. The easiest upgrade path would be to remove all EFL ports and install them from scratch. At least, you should reinstall ecore and evas. - Please note, that your old $HOME/.e is not longer compatible with new + Please note that your old $HOME/.e is no longer compatible with new snapshot version. You will need to remove this directory and let e17 - to create it automatically on the next startup. + create it automatically on the next startup. 20080306: AFFECTS: users of mail/dovecot @@ -701,7 +702,7 @@ upgrades. have been bumped. So you need to rebuild all applications that depend on gnutls. Do something like: - portupgrade -rf gnutls + portupgrade -rf gnutls 20080223: AFFECTS: users of www/instiki @@ -712,7 +713,9 @@ upgrades. If you are updating from a previous version, to preserve your settings and data, please do the following: + mv /usr/local/instiki /usr/local/share + Then update as usual. 20080219: @@ -739,10 +742,11 @@ upgrades. The symon port has been updated from 2.75 to 2.78. It changes the wire protocol again. You should update your symux(8) and symon(8) installations - simultaneously, as + simultaneously, as: + - new symon clients will make old symux servers exit, and - - new symux servers don't understand the old symon client's if() and mem() - probes. + - new symux servers don't understand the old symon client's if() and + mem() probes. 20080208: AFFECTS: users of ports-mgmt/portupgrade @@ -768,6 +772,7 @@ upgrades. AUTHOR: beech@FreeBSD.org Install paths have changed. Please do the following prior to upgrade: + cd /usr/local/www mv punbb punbb.old cp -R punbb.old/upload punbb @@ -807,8 +812,8 @@ upgrades. Update of mod_security2 is a dramatic change, because there is a need to completely rewrite their obsolete rules and migrate for capacity to use new syntax. - You need to make a complete backup of your conf files before to do an - update. + You need to make a complete backup of your configuration files before + you can perform an update. 20080120: AFFECTS: users of www/apache20 @@ -1011,13 +1016,13 @@ upgrades. sysutils/portmaster. Portupgrade users: - # pkgdb -Ff - # portupgrade -f -o textproc/rarian textproc/scrollkeeper - # portupgrade -a + # pkgdb -Ff + # portupgrade -f -o textproc/rarian textproc/scrollkeeper + # portupgrade -a Portmaster users: - # portmaster -o textproc/rarian textproc/scrollkeeper - # portmaster -a + # portmaster -o textproc/rarian textproc/scrollkeeper + # portmaster -a If some of icons, applets, themes or other customized items have disappeared from your desktop in this upgrade, you will need to @@ -1148,7 +1153,7 @@ upgrades. installed, perform an upgrade devel/p5-Gearman-Server with a command like: - # portupgrade -o devel/p5-Gearman-Server devel/p5-gearmand + # portupgrade -o devel/p5-Gearman-Server devel/p5-gearmand 20070923: AFFECTS: users of emulators/linux_base-fc7 @@ -1201,12 +1206,14 @@ upgrades. By popular request, OPTIONS support has been added. When enabled (default), these knobs are ignored: - * WITH__MODULES - * WITHOUT__MODULES - * WITH_CUSTOM_ - * WITH_MODULES - * WITHOUT_MODULES - * WITH_STATIC_MODULES + + WITH__MODULES + WITHOUT__MODULES + WITH_CUSTOM_ + WITH_MODULES + WITHOUT_MODULES + WITH_STATIC_MODULES + However, you can disable OPTIONS by defining WITHOUT_APACHE_OPTIONS. 20070913: @@ -1217,12 +1224,12 @@ upgrades. build, the upgrade is pretty much painless. If you're using the x11/xorg meta-port, upgrade should be as easy as: - # portupgrade -R xorg + # portupgrade -R xorg Users of nvidia-driver will have to make sure Composite extension is turned off and start Xorg with the following command: - $ startx -- -ignoreABI + $ startx -- -ignoreABI The -ignoreABI option is a Xorg option. If you're using gdm, kdm or xdm, you will have to modify your configuration file so that Xorg @@ -1274,7 +1281,7 @@ upgrades. 20070903: AFFECTS: users of net/whois, net/gwhois - AUTHOR: nivo+kw+ports.bfa274@is-root.com + AUTHOR: nivo+kw+ports.bfa274@is-root.com To avoid a conflicting binary name issue, net/whois has renamed its files to mwhois. Please use mwhois if you want to use Marco d'Itri's @@ -1282,7 +1289,7 @@ upgrades. 20070828: AFFECTS: users of www/wordpress-mu - AUTHOR: araujo@FreeBSD.org + AUTHOR: araujo@FreeBSD.org To follow the standards this port has received a small reworking. @@ -1291,16 +1298,16 @@ upgrades. 20070828: AFFECTS: users of databases/mysql51-client - AUTHOR: ale@FreeBSD.org + AUTHOR: ale@FreeBSD.org Since libmysqlclient version number is increased, all ports depending on it must be recompiled. Run something like: - # portmaster -r mysql-client + # portmaster -r mysql-client 20070821: AFFECTS: users of net-im/pidgin - AUTHOR: marcus@FreeBSD.org + AUTHOR: marcus@FreeBSD.org Because sound support was added to finch 2.1.1, the sound files used by pidgin have been moved from the pidgin port to the libpurple port. This @@ -1308,12 +1315,12 @@ upgrades. sounds, you must first upgrade libpurple and pidgin as you normally would, then force a rebuild of libpurple. For example, using portupgrade: - # portupgrade net-im/libpurple net-im/pidgin - # portupgrade -f net-im/libpurple + # portupgrade net-im/libpurple net-im/pidgin + # portupgrade -f net-im/libpurple 20070804: AFFECTS: users of DESTDIR - AUTHOR: gabor@FreeBSD.org + AUTHOR: gabor@FreeBSD.org DESTDIR is a feature, that allows installation of ports into separate environments, like jails. The previous implementation, introduced in the @@ -1336,26 +1343,26 @@ upgrades. If you have 2.4.x installed, perform an upgrade of lang/python24 to lang/python25 with a command like: - # portupgrade -o lang/python25 lang/python24 + # portupgrade -o lang/python25 lang/python24 If you want to keep 2.4.x installed alongside 2.5.x, set the PYTHON_DEFAULT_VERSION variable to 'python2.5' without quotes in make.conf, then go to lang/python and execute - # portupgrade -R python + # portupgrade -R python Once the installed Python has been updated to 2.5, by using one of the methods above, it is required to run the upgrade-site-packages target in lang/python to assure that site-packages are made available to the new Python version. - # cd /usr/ports/lang/python && make upgrade-site-packages + # cd /usr/ports/lang/python && make upgrade-site-packages This Makefile target requires ports-mgmt/portupgrade to be installed. 20070727: AFFECTS: autotools - AUTHOR: ade@FreeBSD.org + AUTHOR: ade@FreeBSD.org Extensive reworking of the autotools ports has occurred, putting them in the canonical locations, along with a suitable wrapper port to make @@ -1365,9 +1372,9 @@ upgrades. Upgrade path is as follows for portupgrade, substitute the appropriate commands if you are using portmaster: - 1. portupgrade -f 'autoconf*' 'automake*' - 2. cd /usr/ports/devel/autotools; make install - 3. portupgrade -a + 1. portupgrade -f 'autoconf*' 'automake*' + 2. cd /usr/ports/devel/autotools; make install + 3. portupgrade -a The second step is optional, but is recommended to bring in all versions of autoconf and automake. @@ -1402,12 +1409,12 @@ upgrades. Please add EMACS_PORT_NAME=emacs22 to /etc/make.conf and upgrade Emacs and related ports with: - # portupgrade -fr emacs + # portupgrade -fr emacs If you want to keep using Emacs 21.3, please add EMACS_PORT_NAME=emacs21 to /etc/make.conf and reinstall Emacs from editors/emacs21 port: - # portupgrade -f -o editors/emacs21 emacs + # portupgrade -f -o editors/emacs21 emacs 20070713: AFFECTS: users of audio/pulseaudio @@ -1548,7 +1555,7 @@ upgrades. smb.conf: [file_share] - vfs objects = readahead + vfs objects = readahead Note that this plugin will result in additional RAM requirements due to the increased amount of kernel buffer caches used by smbd. @@ -1585,7 +1592,7 @@ upgrades. Make sure you choose a filesystem with lots of space for the script output. - # script xorg-upgrade + # script xorg-upgrade You may wish to set BATCH=yes in the environment to avoid interactive dialogue boxes. @@ -1595,19 +1602,19 @@ upgrades. when they actually completed successfully. To switch to portupgrade-devel: - # portupgrade -f -o ports-mgmt/portupgrade-devel portupgrade - # rm -f /usr/ports/INDEX*.db /var/db/pkg/pkgdb.db - # pkgdb -fu + # portupgrade -f -o ports-mgmt/portupgrade-devel portupgrade + # rm -f /usr/ports/INDEX*.db /var/db/pkg/pkgdb.db + # pkgdb -fu If you have changed your ports environment in /etc/make.conf, /usr/local/etc/pkgtools.conf or similar you need to rebuild INDEX: - # cd /usr/ports && make index + # cd /usr/ports && make index If you have not changed your ports environment you can save some time and just fetch the latest INDEX: - # cd /usr/ports && make fetchindex + # cd /usr/ports && make fetchindex It is necessary to set the XORG_UPGRADE environment variable while updating from xorg 6.9 to 7.2. Once the upgrade is complete this @@ -1622,30 +1629,30 @@ upgrades. Unfortunately portupgrade (nor portupgrade-devel) cannot yet handle the rigors of the xorg upgrade without a small bit of help: - # portupgrade -Rf libXft + # portupgrade -Rf libXft If your machine does NOT have any gstreamer ports installed, you can then run: - # portupgrade -a + # portupgrade -a However, if you DO have gstreamer ports installed, you must run: - # portupgrade -a -x 'gstreamer*' + # portupgrade -a -x 'gstreamer*' Followed by: - # portupgrade -Rr 'gstreamer*' + # portupgrade -Rr 'gstreamer*' When packages are available (wait for the announcement on ports@), you may prefer to use precompiled packages to speed up the process: - # portupgrade -aP + # portupgrade -aP Once the upgrade completes successfully, you can delete the xorg-manpages package, which is now orphaned. - # pkg_delete xorg-manpages\* + # pkg_delete xorg-manpages\* The final step is to merge remaining files from /usr/X11R6 into /usr/local (/usr/X11R6 is no longer used with xorg 7.2) and replace @@ -1722,10 +1729,10 @@ upgrades. The current version of Kwiki contains all plugins. To upgrade from old version ( prior to 0.39): - # cd - # rm index.cgi - # rm -rf ./lib # Remove ./lib, if you have one - # kwiki -update + # cd + # rm index.cgi + # rm -rf ./lib # Remove ./lib, if you have one + # kwiki -update And you are safe to uninstall www/p5-Kwiki-*, which also means you do not have to install www/p5-Kwiki-*. @@ -1746,15 +1753,15 @@ upgrades. nagios now uses the registered uid/gid 181 for a fresh installation. To switch to the new scheme, the following may help: - # /usr/local/etc/rc.d/nagios stop - Stopping nagios. - # find / -user nagios -exec chown 181 {} \; - # find / -group nagios -exec chgrp 181 {} \; - # pw groupmod nagios -g 181 - # pw usermod nagios -u 181 -g 181 - # /usr/local/etc/rc.d/nagios start - Performing sanity check of nagios configuration: OK - Starting nagios. + # /usr/local/etc/rc.d/nagios stop + Stopping nagios. + # find / -user nagios -exec chown 181 {} \; + # find / -group nagios -exec chgrp 181 {} \; + # pw groupmod nagios -g 181 + # pw usermod nagios -u 181 -g 181 + # /usr/local/etc/rc.d/nagios start + Performing sanity check of nagios configuration: OK + Starting nagios. 20070405: AFFECTS: users of print/ghostscript-* @@ -1763,8 +1770,8 @@ upgrades. The default ghostscript port is changed from ghostscript-gnu to ghostscript-gpl. To upgrade - portupgrade -o print/ghostscript-gpl ghostscript-gnu - portmaster -o print/ghostscript-gpl ghostscript-gnu + portupgrade -o print/ghostscript-gpl ghostscript-gnu + portmaster -o print/ghostscript-gpl ghostscript-gnu If you want to use the ghostscript-gnu as default, put WITH_GHOSTSCRIPT_GNU=yes in your make.conf. @@ -1778,18 +1785,18 @@ upgrades. gimp-print, if you have gimp-print installed you will need to pkg_delete gimp-print before you install or upgrade the gimp. - portmaster users: - (gimp) - portmaster -o graphics/gimp-app gimp - portmaster -u graphics/gimp - (gimp-devel) - portmaster -o graphics/gimp-app-devel gimp-devel - portmaster -u graphics/gimp-devel + Portmaster users: + (gimp) + portmaster -o graphics/gimp-app gimp + portmaster -u graphics/gimp + (gimp-devel) + portmaster -o graphics/gimp-app-devel gimp-devel + portmaster -u graphics/gimp-devel - portupgrade users: - (gimp) - portupgrade -o graphics/gimp-app gimp - portupgrade -u graphics/gimp + Portupgrade users: + (gimp) + portupgrade -o graphics/gimp-app gimp + portupgrade -u graphics/gimp 20070404: AFFECTS: users of print/gutenprint @@ -1799,13 +1806,13 @@ upgrades. one of the following examples. If you have gimp-print installed you will need to pkg_delete gimp-print before installing gutenprint. - portmaster users: - portmaster -o print/gutenprint-base gutenprint - portmaster -u print/gutenprint + Portmaster users: + portmaster -o print/gutenprint-base gutenprint + portmaster -u print/gutenprint - portupgrade users: - portupgrade -o print/gutenprint-base gutenprint - portupgrade -u print/gutenprint + Portupgrade users: + portupgrade -o print/gutenprint-base gutenprint + portupgrade -u print/gutenprint 20070402: AFFECTS: users of devel/cvstrac @@ -1895,18 +1902,16 @@ upgrades. taking care of it by default. 20070318: - AFFECTS: users of devel/gettext (ie: YOU) + AFFECTS: users of devel/gettext (i.e.: YOU) AUTHOR: ade@FreeBSD.org As a result of the upgrade to gettext-0.16.1, the shared library version of libintl has changed, so you will need to rebuild all ports that - depend on gettext (ie: most of them, sorry): + depend on gettext (read: most of them, sorry): - portupgrade -rf gettext - - or - - portmaster -r gettext + portupgrade -rf gettext + or: + portmaster -r gettext In addition, if you have multimedia/vlc installed, you should deinstall it *before* either of the above commands, and reinstall it manually @@ -2200,7 +2205,7 @@ upgrades. it was terminal charset). If you still want to send messages as ISO-8859-1, you should send either global encode or server specific encode to ISO-8859-1. - For global encode: /setp charset.global.encode = "ISO-8859-1" + For global encode: /setp charset.global.encode = "ISO-8859-1" For server encode: (on server buffer) /charset encode ISO-8859-1 20070109: @@ -2214,7 +2219,7 @@ upgrades. should also update the server to make sure you are not left without the server-side tools. Do something like: - portupgrade postgresql-client postgresql-server + portupgrade postgresql-client postgresql-server 20070105: AFFECTS: users of mail/spamprobe @@ -2231,13 +2236,13 @@ upgrades. The port now has support for the PBL database backend; unless built with WITHOUT_PBL set, SpamProbe will use PBL as the default even if you have an existing BerkleyDB or hash database; in that case, use the parameter "-d" to - specify the type of the existing database on the command line, e.g. + specify the type of the existing database on the command line, e.g.: - spamprobe -d bdb:$HOME/.spamprobe receive + spamprobe -d bdb:$HOME/.spamprobe receive - or + or: - spamprobe -d hash:$HOME/.spamprobe receive + spamprobe -d hash:$HOME/.spamprobe receive Using PBL instead of BerkleyDB might be a good idea, though, as the former seems to perform better. You can convert your existing database to PBL using @@ -2288,7 +2293,7 @@ upgrades. have been bumped. So you need to rebuild all applications that depend on gnutls. Do something like: - portupgrade -rf gnutls + portupgrade -rf gnutls 20061231: AFFECTS: users of mail/sylpheed-claws* @@ -2348,7 +2353,7 @@ upgrades. ... by creating a floppy device icon on your KDE desktop and selecting the above-mentioned fstab entry in the device dropdown list on the - device tab. + device tab. - Mounting volumes from fixed drives is prohibited for non-superusers by default. @@ -2544,11 +2549,11 @@ upgrades. upgrade succeed. Portupgrade users: - pkgdb -Ff - portupgrade -rf pkg-config\* + pkgdb -Ff + portupgrade -rf pkg-config\* Portmaster users: - portmaster -r pkg-config\* + portmaster -r pkg-config\* 20061010: AFFECTS: users of devel/avr-gcc* @@ -2576,7 +2581,7 @@ upgrades. for some reason, please manually perform a portupgrade to the new name: - portupgrade -o devel/avr-gcc-3 avr-gcc + portupgrade -o devel/avr-gcc-3 avr-gcc 20061010: AFFECTS: user of sysutils/flexbackup @@ -2651,7 +2656,7 @@ upgrades. from (before update) snmpd_flags="-a -c /usr/local/etc/snmpd.conf -p /var/run/snmpd.pid" - to (after update) + to (after update) snmpd_flags="-a" snmpd_pidfile="/var/run/snmpd.pid" snmpd_conffile="/usr/local/etc/snmpd.conf" @@ -2728,7 +2733,8 @@ upgrades. AUTHOR: nobutaka@FreeBSD.org Input modes for uim-anthy and uim-canna are reorganized since version 1.2.0. - Please re-configure the following keybindings with uim-pref. + Please re-configure the following keybindings with uim-pref: + - off key - convert to halfwidth alphanumeric key - convert to fullwidth alphanumeric key @@ -2903,9 +2909,10 @@ upgrades. AUTHOR: mwisnicki+freebsd@gmail.com If you have installed both ekg-1.6,2 and libgadu-20051229_1 then you should - first deinstall them and install polish/ekg after that, eg: - pkg_deinstall -f pl-ekg-\* pl-libgadu-\* - portinstall polish/ekg + first deinstall them and install polish/ekg after that, e.g.: + + pkg_deinstall -f pl-ekg-\* pl-libgadu-\* + portinstall polish/ekg 20060723: AFFECTS: users of www/dillo-i18n @@ -3026,7 +3033,7 @@ upgrades. have been bumped. So you need to rebuild all applications that depend on gnutls. Do something like: - portupgrade -rf gnutls + portupgrade -rf gnutls 20060703: AFFECTS: users of audio/amarok @@ -3172,7 +3179,7 @@ upgrades. 20060612: AFFECTS: users of editors/staroffice60, editors/staroffice70 and - german/staroffice70 + german/staroffice70 AUTHOR: erwin@FreeBSD.org The USE_CDROM knob was renamed to WITH_CDROM for consistency @@ -3237,9 +3244,10 @@ upgrades. amavisd-new, this port was modified to depend on the same two archiver ports as well. The amavisd-new port automatically recognizes arj, but not unzoo, so ${PREFIX}/etc/amavisd.conf should be modified. This line should be changed: - ['zoo', \&do_zoo, 'zoo'], + + ['zoo', \&do_zoo, 'zoo'], To this one: - ['zoo', \&do_zoo, ['zoo','unzoo'] ], + ['zoo', \&do_zoo, ['zoo','unzoo'] ], 20060526: AFFECTS: users of net/openldap23-server @@ -3272,7 +3280,7 @@ upgrades. 20060522: AFFECTS: users of astro/boinc-setiathome-enhanced, - astro/boinc-setiathome-naparst, astro-boinc-setiathome + astro/boinc-setiathome-naparst, astro-boinc-setiathome AUTHOR: r.c.ladan@gmail.com As SETI@home doesn't generate work for 4.x clients anymore, the ports @@ -3376,7 +3384,7 @@ upgrades. your KDE installation", make sure to downgrade your lua installation back to 5.0: - portupgrade -f -o lang/lua50 lua-5.1 + portupgrade -f -o lang/lua50 lua-5.1 20060501: AFFECTS: users of www/instiki @@ -3390,16 +3398,16 @@ upgrades. 1. cd /usr/ports/www/instiki; make extract 2. Execute ruby work/instiki-0.11.0/script/import_storage \ - -t /usr/local/instiki/storage/2500 \ - -i /usr/local/instiki \ - -d sqlite \ - -o [some location]/instiki_import.sql + -t /usr/local/instiki/storage/2500 \ + -i /usr/local/instiki \ + -d sqlite \ + -o [some location]/instiki_import.sql 3. This will produce instiki_import.sql file in the specified location. Open it in a text editor and inspect carefully. - 4. Upgrade your instiki port normally (eg portupgrade) - 5. Connect to your production database, eg: + 4. Upgrade your instiki port normally (e.g. portupgrade) + 5. Connect to your production database, e.g.: sqlite3 /usr/local/instiki/db/production.db.sqlite3 - and have it execute instiki_import.sql, eg: + and have it execute instiki_import.sql, e.g.: .read [some location]/instiki_import.sql 6. Execute ruby /usr/local/instiki/script/reset_references production @@ -3414,10 +3422,10 @@ upgrades. use of the gnome_upgrade.sh script. That script should not be used. Instead, use the following simple recipe: -pkgdb -Ff -portupgrade -o net/avahi -f howl -portupgrade -o x11/gnome-screensaver -f xscreensaver-gnome -portupgrade -a + pkgdb -Ff + portupgrade -o net/avahi -f howl + portupgrade -o x11/gnome-screensaver -f xscreensaver-gnome + portupgrade -a 20060425: AFFECTS: users of net-im/ejabberd @@ -3462,8 +3470,8 @@ portupgrade -a 20060414: AFFECTS: users of www/horde, www/horde-php5, www/horde-passwd, - deskutils/nag, deskutils/mnemo, deskutils/kronolith, - mail/turba, mail/ingo, mail/imp, devel/chora + deskutils/nag, deskutils/mnemo, deskutils/kronolith, + mail/turba, mail/ingo, mail/imp, devel/chora AUTHOR: shaun@inerd.com The Horde ports no longer overwrite your existing configuration @@ -3679,7 +3687,7 @@ portupgrade -a so before starting the daemons, you should fix permissions for each spooldir (default: /var/spool/jabber): - # chown -R jabber:jabber spooldir/Transport_JID + # chown -R jabber:jabber spooldir/Transport_JID 20060223: AFFECTS: all ports using libtool as part of the build process @@ -3762,9 +3770,11 @@ portupgrade -a The midnight dccm and dccifd system log message has been changed to disclose spam passed from whiteclnt-listed MX servers. MX servers should now be listed in /var/dcc/whiteclnt with lines like: - mx ip 10.2.3.4 - mx ip 10.5.6.0/28 - mxdcc ip 10.7.8.9 + + mx ip 10.2.3.4 + mx ip 10.5.6.0/28 + mxdcc ip 10.7.8.9 + "MX" marks the IP address of one of your mail systems that should be ignored in initial Received: headers and when reported by sendmail to dccm. "MXDCC" marks IP addresses of your mail systems that run DCC clients and that will @@ -3775,7 +3785,7 @@ portupgrade -a 20060207: AFFECTS: users of www/jakarta-tomcat4, www/jakarta-tomcat41, - www/jakarta-tomcat5, www/jakarta-tomcat55, and www/tomcat55 + www/jakarta-tomcat5, www/jakarta-tomcat55, and www/tomcat55 AUTHOR: lawrance@FreeBSD.org The Tomcat ports listed above have been converted to use new-style @@ -3801,7 +3811,7 @@ portupgrade -a Users of expat2 (and its many dependencies) should do the following to properly update expat2 and all of its dependencies: - portupgrade -rf textproc/expat2 + portupgrade -rf textproc/expat2 20060201: AFFECTS: users of sysutils/xmbmon @@ -3845,8 +3855,8 @@ portupgrade -a 20060123: AFFECTS: users of mail/qmail, mail/qmail-ldap, mail/qmail-mysql, - mail/qmail-spamcontrol, mail/qmail-tls and all dependant - ports. + mail/qmail-spamcontrol, mail/qmail-tls and all dependant + ports. AUTHOR: garga@FreeBSD.org If you use qmail installed on a PREFIX different of /var/qmail, @@ -3880,11 +3890,11 @@ portupgrade -a Then, remove the previous configuration file. Finally, start qvamps again. The configuration file can be removed with: - $ rm ~/.qvamps/qvampsrc + $ rm ~/.qvamps/qvampsrc 20060112: AFFECTS: users of mail/postfix, mail/postfix1, mail/postfix21, - mail/postfix-current + mail/postfix-current AUTHOR: mnag@FreeBSD.org Now all postfix ports use rcNG script to startup. If you have any file @@ -3920,9 +3930,9 @@ portupgrade -a File: ~/.lxdvdrip.conf From: play_cell_name=play_cell - vamps_name=vamps + vamps_name=vamps To: play_cell_name=play_cell_lxdvdrip - vamps_name=vamps_lxdvdrip + vamps_name=vamps_lxdvdrip 20060111: AFFECTS: users of devel/perforce @@ -3957,8 +3967,7 @@ portupgrade -a 20060108: AFFECTS: users of x11/kdelibs3, x11/kdebase3, deskutils/superkaramba, - x11-themes/kde-windeco-smoothblend, irc/kvirc, - editors/vimpart + x11-themes/kde-windeco-smoothblend, irc/kvirc, editors/vimpart AUTHOR: kde@FreeBSD.org A number of files have been moved from kdebase to kdelibs between @@ -3975,21 +3984,21 @@ portupgrade -a 1.) Delete installed packages which conflict with the updated KDE ports. - pkg_deinstall -f kdebase-\[0-9\]\* superkaramba-\[0-9\]\* \ - kde-windeco-smoothblend-\[0-9]\* kvirc-\[0-9\]\* \ - kdeaddons-vimpart-\[0-9\]\* + pkg_deinstall -f kdebase-\[0-9\]\* superkaramba-\[0-9\]\* \ + kde-windeco-smoothblend-\[0-9]\* kvirc-\[0-9\]\* \ + kdeaddons-vimpart-\[0-9\]\* 2.) Now update the remaining KDE ports. - portupgrade -O arts\* kde\* \*kde-i18n\* + portupgrade -O arts\* kde\* \*kde-i18n\* or, if you want to update KDE along with other updated ports: - portupgrade -a + portupgrade -a 3.) Reinstall the KDE ports you deleted in step 1. - portinstall -O kdebase + portinstall -O kdebase Superkaramba is now included in misc/kdeutils3. @@ -4052,9 +4061,9 @@ portupgrade -a Due to this change, the configuration files need to be regenerated. Please, erase all previous configuration files. The configuration file samples will be generated on the 1st invocation of the - scripts. + scripts: - $ rm ~/.tovid/* + $ rm ~/.tovid/* 20051228: AFFECTS: users of shells/scponly @@ -4084,7 +4093,7 @@ portupgrade -a you may safely remove pear-XML_RPC, pear-Console_Getopt, pear-Archive_Tar and php[45]-pear and then run: - portupgrade -o devel/pear -f pear-PEAR + portupgrade -o devel/pear -f pear-PEAR 20051212: AFFECTS: users of net/ntop @@ -4107,7 +4116,7 @@ portupgrade -a If you use the command below, everything should be fine. - $ portupgrade -fr 'ocaml*' 'mldonkey-*devel*' + $ portupgrade -fr 'ocaml*' 'mldonkey-*devel*' 20051210: AFFECTS: users of mail/fetchmail using SSL encryption @@ -4125,17 +4134,17 @@ portupgrade -a * Run the c_rehash tool on the freshly installed certificates: - If you are using OpenSSL from the base system (this is the default) - use the following command: + use the following command: % perl /usr/src/crypto/openssl/tools/c_rehash /home/user/.certs - - If you are using OpenSSL from security/openssl please use - % c_rehash /home/user/.certs + - If you are using OpenSSL from security/openssl please use command: + % c_rehash /home/user/.certs * Use the following options to enable SSL encryption in your .fetchmailrc configuration file: options ssl sslcertpath /home/user/.certs sslcertck - sslfingerprint '< fingerprint >' + sslfingerprint '< fingerprint >' < other options > 20051208: @@ -4287,20 +4296,20 @@ portupgrade -a The canonical update procedure for existing trac environments is: - $ export TRAC_ENV=/path/to/trac/env - $ # backup existing trac environment - $ cp -Rp $TRAC_ENV $TRAC_ENV.backup # backup existing trac env - $ # convert database from sqlite 2 to sqlite 3 format - $ mv $TRAC_ENV/db/trac.db $TRAC_ENV/db/trac2.db - $ sqlite $TRAC_ENV/db/trac2.db .dump | sqlite3 $TRAC_ENV/db/trac.db - $ # upgrade trac environment - $ /usr/local/bin/trac-admin $TRAC_ENV upgrade - $ /usr/local/bin/trac-admin $TRAC_ENV resync - $ /usr/local/bin/trac-admin $TRAC_ENV wiki upgrade + $ export TRAC_ENV=/path/to/trac/env + $ # backup existing trac environment + $ cp -Rp $TRAC_ENV $TRAC_ENV.backup # backup existing trac env + $ # convert database from sqlite 2 to sqlite 3 format + $ mv $TRAC_ENV/db/trac.db $TRAC_ENV/db/trac2.db + $ sqlite $TRAC_ENV/db/trac2.db .dump | sqlite3 $TRAC_ENV/db/trac.db + $ # upgrade trac environment + $ /usr/local/bin/trac-admin $TRAC_ENV upgrade + $ /usr/local/bin/trac-admin $TRAC_ENV resync + $ /usr/local/bin/trac-admin $TRAC_ENV wiki upgrade Consult the full upgrade instructions at: - http://projects.edgewall.com/trac/wiki/TracUpgrade + http://projects.edgewall.com/trac/wiki/TracUpgrade 20051013: AFFECTS: users of www/mediawiki @@ -4311,7 +4320,7 @@ portupgrade -a If you want to preserve your 1.4 installation, run this: - # portupgrade -o www/mediawiki14 -f mediawiki + # portupgrade -o www/mediawiki14 -f mediawiki 20051013: AFFECTS: users of mail/qmrtg @@ -4505,19 +4514,19 @@ portupgrade -a 1.) Delete installed packages which conflict with the updated KDE ports. - pkg_deinstall -f kdeadmin-\[0-9\]\* + pkg_deinstall -f kdeadmin-\[0-9\]\* 2.) Now update the remaining KDE ports. - portupgrade -O arts\* kde\* \*kde-i18n\* + portupgrade -O arts\* kde\* \*kde-i18n\* or, if you want to update KDE along with other updated ports: - portupgrade -a + portupgrade -a 3.) Reinstall the KDE ports you deleted in step 1. - portinstall -O kdeadmin + portinstall -O kdeadmin 20050728: AFFECTS: users of sysutils/sge and sysutils/sgeee @@ -4578,7 +4587,7 @@ portupgrade -a with pkg_info), you should cvsup and recompile qt33 and everything depending on it: - portupgrade -rf qt\* + portupgrade -rf qt\* Previous versions of the qt33 port contained a patch that introduces binary incompatibility between unpatched qt33 and software @@ -4755,9 +4764,9 @@ portupgrade -a The latest FreeBSD CVS snapshot has been committed under multimedia/ffmepg-devel. In order to build it, you need to deinstall - any ffmpeg ports first. + any ffmpeg ports first: - # pkg_deinstall multimedia/ffmpeg + # pkg_deinstall multimedia/ffmpeg Furthermore, video capture is no longer working in the latest version. Work is been done to overcome this. @@ -4818,8 +4827,8 @@ portupgrade -a below, it is recommend that you backup your personal "~/.opera" directory and remove it, like this: - # cp -Rp ~/.opera ~/.opera-bak - # rm -rf ~/.opera/* + # cp -Rp ~/.opera ~/.opera-bak + # rm -rf ~/.opera/* After that, you can put your bookmarks, email, contacts, etc. back in ~/.opera/. The most important files are your bookmarks @@ -4836,9 +4845,9 @@ portupgrade -a 1. You must update your pysh profile (~/.ipython/ipythonrc-pysh): a) Add to it the line: - import_all IPython.Extensions.InterpreterExec - b) Delete the line - execfile pysh.py + import_all IPython.Extensions.InterpreterExec + b) Delete the line: + execfile pysh.py 2. You must also delete from ~/.ipython/ the file pysh.py. 20050419: @@ -4984,15 +4993,15 @@ portupgrade -a - www/akregator is now included into deskutils/kdepim3. - x11-themes/phase is now included in x11-themes/kdeartwork3. - www/konqueror-nsplugins has been removed and is now integrated into - x11/kdebase3. + x11/kdebase3. - Juk has been split out of multimedia/kdemultimedia3 and is now - available as audio/juk. + available as audio/juk. - Akode has been split out of multimedia/kdemultimedia3 and is now - available as audio/akode and audio/akode-plugins-*. Akode is also + available as audio/akode and audio/akode-plugins-*. Akode is also a default dependency of multimedia/kdemultimedia3 now. - audio/mpeglib_artsplug has been demoted to legacy status and is no - longer the default decoder backend for kdemultimedia3. It's also not - depended on by kdemultimedia3 by default anymore. + longer the default decoder backend for kdemultimedia3. It's also not + depended on by kdemultimedia3 by default anymore. Known post-updating issues: @@ -5132,13 +5141,13 @@ portupgrade -a 1) Update i2p port to the new one 2) Use the i2prouter script to uninstall i2p from user account. - You are going to lose all your configuration. + You are going to lose all your configuration: - $ i2prouter uninstall + $ i2prouter uninstall - 3) Install the new i2p version + 3) Install the new i2p version: - $ i2prouter install + $ i2prouter install 20050301: AFFECTS: users of sysutils/ganglia-monitor-core @@ -5283,8 +5292,8 @@ portupgrade -a * run some magic incantations to upgrade all ports depending on perl, that is run something like : portupgrade -f `(pkg_info -R perl-5\* |tail +4; \ - find /usr/local/lib/perl5/site_perl/5.[68].[1245] -type f -print0 \ - | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` + find /usr/local/lib/perl5/site_perl/5.[68].[1245] -type f -print0 \ + | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` This is likely to fail for a few ports, you'll have to upgrade them afterwards by hand. @@ -5508,7 +5517,7 @@ have to modify your ~/.procmailrc files. Please read upgrading.html in 20041226: AFFECTS: users of Horde and the related ports (Turba, IMP, Nag, Kronolith, - Mnemo, Chora) + Mnemo, Chora) AUTHOR: thierry@FreeBSD.org As of this update, the configuration files are generated by the application, @@ -5574,7 +5583,7 @@ have to modify your ~/.procmailrc files. Please read upgrading.html in affects the various plugins. Hence, users should upgrade all jdictionary related ports at once to avoid inconsistencies: - $ portupgrade jdictionary\* + $ portupgrade jdictionary\* 20041214: AFFECTS: users of net/freenet6 @@ -5704,9 +5713,10 @@ have to modify your ~/.procmailrc files. Please read upgrading.html in http://perl.apache.org/docs/1.0/guide/install.html#When_DSO_can_be_Used To do this, you will need to: - pkg_delete -f apache-mod_perl - pkg_delete -f p5-libapreq-static - portupgrade -rR bricolage + + pkg_delete -f apache-mod_perl + pkg_delete -f p5-libapreq-static + portupgrade -rR bricolage Bricolage will rebuild mod_perl, apache and libapreq using their standard versions. @@ -5722,9 +5732,9 @@ have to modify your ~/.procmailrc files. Please read upgrading.html in There are several ways to work around this, for example: - - Run 'make fetchindex' after cvsup'ing ports. + - Run 'make fetchindex' after cvsup'ing ports, - or + or: - Adjust the PORTS_INDEX variable in your environment or in pkgtools.conf (see portupgrade(1) or the default pkgtools.conf) to @@ -6257,8 +6267,8 @@ have to modify your ~/.procmailrc files. Please read upgrading.html in * now, run some magic incantations to upgrade all ports depending on perl, that is run something like : portupgrade -f `(pkg_info -R perl-5.8.5 |tail +4; \ - find /usr/local/lib/perl5/site_perl/5.8.[124] -type f -print0 \ - | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` + find /usr/local/lib/perl5/site_perl/5.8.[124] -type f -print0 \ + | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` This is likely to fail for a few ports, you'll have to upgrade them afterwards. Please note, that this last step is, strictly speaking, not necessary, @@ -6575,8 +6585,8 @@ Option "XkbRules" "xfree86" * now, run some magic incantations to upgrade all ports depending on perl, that is run something like : portupgrade -f `(pkg_info -R perl-5.8.4 |tail +4; \ - find /usr/local/lib/perl5/site_perl/5.8.2 -type f -print0 \ - | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` + find /usr/local/lib/perl5/site_perl/5.8.2 -type f -print0 \ + | xargs -0 pkg_which -fv | sed -e '/: ?/d' -e 's/.*: //')|sort -u` This is likely to fail for a few ports, you'll have to upgrade them afterward. @@ -6596,7 +6606,7 @@ Option "XkbRules" "xfree86" The OpenLDAP library soname has changed, requiring a recompilation of all dependent ports: - portupgrade -rf net/openldap22-client + portupgrade -rf net/openldap22-client 20040525: AFFECTS: users of databases/postgresql-client @@ -6697,7 +6707,7 @@ Option "XkbRules" "xfree86" Users of expat2 (and its many dependencies) should do the following to properly update expat2 and all of its dependencies: - portupgrade -rf textproc/expat2 + portupgrade -rf textproc/expat2 20040311: AFFECTS: users of databases/postgresql7 @@ -6810,7 +6820,7 @@ Option "XkbRules" "xfree86" Change the default version of perl to 5.8. 1) Force perl-5.6.1 to be upgraded with perl-5.8. - portupgrade -o lang/perl5.8 -f perl-5.6.1_15 + portupgrade -o lang/perl5.8 -f perl-5.6.1_15 2) Update all p5-* modules. portupgrade -f p5-\* -- cgit v1.2.3