From c41e06d64846d54d811f54bcbc429f4e90b536ee Mon Sep 17 00:00:00 2001
From: Wesley Shields <wxs@FreeBSD.org>
Date: Tue, 22 Feb 2011 02:10:51 +0000
Subject: The Arduino Uno (http://arduino.cc/) is an open source hardware
 micro- controller designed primarily for prototyping and experimentation.
 Although the devel/arduino port already exists for programming the device, it
 will not work properly with the newest Arduino hardware.  Previous versions
 of the Arduino used an FTDI USB to Serial interface.  The newest Arduino
 (beginning with the Uno) uses an on-board ATMel 8U2 controller to emulate a
 USB to Serial interface with its own custom Vendor ID and Hardware ID.  As a
 result, NONE of the existing FreeBSD USB to serial drivers can work with it. 
 This kernel driver supplies the necessary kernel support for the Arduino Uno
 on FreeBSD.

Additionally, some 'ACM' USB Serial devices may work with this driver by
manually adding their Vendor ID and Product ID combination to files/ids.txt

Official web site
WWW:  http://www.mrp3.com/uarduno.html

PR:		ports/153963
Submitted by:	Bob Frazier <bobf@mrp3.com>
---
 comms/uarduno/Makefile | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 comms/uarduno/Makefile

(limited to 'comms/uarduno/Makefile')

diff --git a/comms/uarduno/Makefile b/comms/uarduno/Makefile
new file mode 100644
index 000000000000..fe8ddd64334c
--- /dev/null
+++ b/comms/uarduno/Makefile
@@ -0,0 +1,91 @@
+# Ports collection makefile for:	uarduno
+# Date created:				11-19-2010
+# Whom:					'Big Bad Bob' Frazier <bobf@mrp3.com>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	uarduno
+PORTVERSION=	1.0
+CATEGORIES=	comms kld
+MASTER_SITES=	http://mrp3.com/
+
+MAINTAINER=	bobf@mrp3.com
+COMMENT=	FreeBSD Kernel Driver for the Arduino Uno USB interface
+
+NO_PACKAGE=	You must (re)build this port with your kernel source
+
+# need to enforce installation into kernel module directory
+MAKE_ENV+=	KMODDIR=${KMODDIR}
+LOCALBASE=	${KMODDIR}
+
+SRCPREFIX?=	${SRC_BASE}
+
+# some test targets need a predictable source directory
+WRKSRC=		${WRKDIR}/uarduno
+
+PLIST_FILES=	uarduno.ko
+MAKE_JOBS_SAFE=	yes
+
+# no license required
+LICENSE=		BSD
+NO_LICENSES_INSTALL=	yes
+NO_LICENSES_DIALOGS=	yes
+
+#
+# version 7xxxx and 8xxxx are very different
+# so make sure I correctly identify them
+#
+CFLAGS+=	-DKERNELVER=${OSVERSION}
+
+.include <bsd.port.pre.mk>
+
+.if ${OSVERSION} < 700000
+BROKEN=		not tested for earlier than 7.x, probably won't build
+.endif
+
+.if ${OSVERSION} < 800000
+# Simple check for 7.x kernel source (find usb.c)
+.if ! exists(${SRCPREFIX}/sys/dev/usb/usb.c)
+IGNORE=	this port will not build without the latest 7.x kernel source
+.endif
+.else
+# 8.x and later kernels (not tested in 9.x yet, mabye add to kernel?)
+# simple check for 8.x and later kernel source (find usb_core.c)
+.if ! exists(${SRCPREFIX}/sys/dev/usb/usb_core.c)
+IGNORE=	this port will not build without the latest kernel source
+.endif
+.endif
+
+# post-patch target, copy 'ids.txt' as 'ids.h' (user-modifiable file)
+post-patch:
+	@${CP} ${FILESDIR}/ids.txt ${WRKSRC}/ids.h
+
+# post-install target, make sure kernel module is unloaded
+post-install:
+	@if kldstat -q -m uhub/uarduno ; then \
+	 echo "" ; echo " +++ Unloading uarduno.ko (related devices will need to be re-attached)" ; kldunload uarduno ; fi
+	@${ECHO_MSG}
+	@${CAT} ${PKGMESSAGE}
+	@${ECHO_MSG}
+
+#
+# these next 2 targets are for developer use
+#
+# building a source tarball and related files
+uarduno-src-tarball:
+	${MAKE} patch
+	${MAKE} -C ${WRKSRC} my-clean
+	tar -c -f ${PORTSDIR}/distfiles/${DISTNAME}${EXTRACT_SUFX} -C ${WRKDIR} uarduno
+	${MAKE} makesum
+
+# partial clean for incremental build and test
+uarduno-part-clean:
+	-${RM} ${WRKDIR}/.patch_done.uarduno._boot_kernel
+	-${RM} ${WRKDIR}/.configure_done.uarduno._boot_kernel
+	-${RM} ${WRKDIR}/.build_done.uarduno._boot_kernel
+	-${RM} ${WRKDIR}/.install_done.uarduno._boot_kernel
+	${MAKE} -C ${WRKSRC} my-clean
+	${MAKE} patch
+
+.include <bsd.port.post.mk>
-- 
cgit v1.2.3