From 865a1d2f0a97df88638e7f86dcfe229e71d17322 Mon Sep 17 00:00:00 2001 From: Kris Kennaway Date: Fri, 28 Feb 2003 01:59:12 +0000 Subject: Drive a stake through the heart of some more files that were committed to after they were removed, which caused them to mysteriously resurrect when updating with a -D tag. Holy water sprinkled by: peter --- graphics/glx/Makefile | 334 -------------------------------------------------- 1 file changed, 334 deletions(-) delete mode 100644 graphics/glx/Makefile (limited to 'graphics/glx') diff --git a/graphics/glx/Makefile b/graphics/glx/Makefile deleted file mode 100644 index bb0b8c57a36e..000000000000 --- a/graphics/glx/Makefile +++ /dev/null @@ -1,334 +0,0 @@ -# New ports collection makefile for: GLX -# Date created: 13 September 1999 -# Whom: Marc E E van Woerkom -# -# $FreeBSD$ -# -# -# Notes: -# -# . You need at least XFree86 3.3.4 (or the glx patched 3.3.3.1)! -# This port is set up for 3.3.5 -# -# . Mesa-3.0 has to be uninstalled before this port builds! -# Why? Because we need to create a glx aware version. -# -# . This stuff has been tested with -# - a Diamond Viper 330 (RIVA 128), -# - a Diamond Viper 550 (RIVA TNT), -# - and was reported to work with a Matrox G200 card -# -# . Glx on n-vidia's site is outdated (we have XFree86-3.3.5 now -# so I rolled my own snapshot of the open project glx code. -# It is slightly outdated but will be updated soon. -# -# . The current Mesa3 port for FreeBSD does not stop at the 'patch' -# target, but will instead try to build X11 immediatley if XFree86 -# is not present. -# For this version (XFree86 3.3.5 needs no patches for glx yet) we -# ignore this wrong behaviour. -# -# . We need tclsh for building - the choice for tclsh 8.0 is due to -# lack of time to include a proper selection scheme -# -# . You can set CHIPSET_3D appropriately in /etc/make.conf if the -# question bugs you -# - -PORTNAME= glx -PORTVERSION= 990802 -CATEGORIES= graphics -MASTER_SITES= ${MASTER_SITE_LOCAL} -MASTER_SITE_SUBDIR= 3d/XF3.3.5 -DISTFILES= ${DISTNAME}.tar.bz2 \ - riva-x-glx.faq.bz2 \ - Mesa-3_0.diff.bz2 - -MAINTAINER= 3d@freebsd.org - -# search for tclsh, if not present build it -BUILD_DEPENDS= tclsh8.0:${PORTSDIR}/lang/tcl80 - -# These settings are here to make future updates to this port easier -#PATCH_XFREE= yes -PATCH_MESA= yes - -.if defined(PATCH_XFREE) -BUILD_DEPENDS= ${NONEXISTENT}:${PORTSDIR}/x11/XFree86:patch -.endif -.if defined(PATCH_MESA) -BUILD_DEPENDS= ${NONEXISTENT}:${PORTSDIR}/graphics/Mesa3:patch -.endif - -USE_BZIP2= yes - -EXTRACT_ONLY= ${DISTNAME}.tar.bz2 - -DIST_SUBDIR= glx - -WRKSRC= ${WRKDIR}/${DISTNAME} - -# I don't want to build XFree86 too soon, so don't use USE_X_PREFIX -#USE_X_PREFIX= yes -PREFIX= ${X11BASE} - -XFCONFIG= /etc/XF86Config - -XFREEVER= 3.3.5 -XFREEDIR= ${PORTSDIR}/x11/XFree86/work/xc - -MESAVER= 3.0 -MESADIR= ${PORTSDIR}/graphics/Mesa3/work/Mesa-3.0 - -# As we ask for CHIPSET_3D if not set -IS_INTERACTIVE= YES - -# comment out the following line, -# if you want to build with Imake (Linux/alpha favours that) -USE_AUTOCONF= yes -GNU_CONFIGURE= yes - -# we support nvidia RIVA 128, TNT.. and Matrox G200/400 cards -.if defined(CHIPSET_3D) -.if ${CHIPSET_3D} == RIVA -CONFIGURE_ARGS= --with-chipset=tnt -.endif -.if ${CHIPSET_3D} == MGA -CONFIGURE_ARGS= --with-chipset=mga -.endif -.endif - -CONFIGURE_ARGS+= --with-mesa=${MESADIR} \ - --with-mesa-version=mesa30 \ - # --with-mmx-asm --with-3dnow-asm - -USE_GMAKE= yes - -.if !defined(GNU_CONFIGURE) -USE_IMAKE= yes -.endif - -.include - -# -# before 'patch' -# -# . apply some patches to the Mesa 3.0 distribution -# -pre-patch: -.if defined(PATCH_XFREE) - @${ECHO} "=> Patching XFree86-${XFREEVER} for GLX .." - cd ${XFREEDIR}; \ - ${PATCH} -s -f <${FILESDIR}/XFree86-3_3_5.diff -.endif -.if defined(PATCH_MESA) - @${ECHO} "=> Checking Mesa-${MESAVER} installation .." - @if \ - pkg_info -e "Mesa-${MESAVER}"; \ - then \ - ${ECHO} "Found Mesa-${MESAVER} - please deinstall"; \ - ${ECHO} "Aborting.."; \ - ${FALSE} ; \ - fi -.if exists(${MESADIR}/../.glxpatch_done) - @${ECHO} "=> Mesa-${MESAVER} seems already patched for GLX .." -.else - @${ECHO} "=> Patching Mesa-${MESAVER} for GLX acceleration .." - @${ECHO} "(ignore the rejections, as they should happen in comments only)" - -cd ${MESADIR}; \ - bzcat ${DISTDIR}/${DIST_SUBDIR}/Mesa-3_0.diff.bz2 | ${PATCH} -s -f - ${TOUCH} ${MESADIR}/../.glxpatch_done -.endif -.endif - -# -# before 'configure' -# -# . patch glx configure.in, libGL/Makefile.in, -# serverglx/Makefile.in (yes, this is an ugly hack) -# -pre-configure: -.if !defined(CHIPSET_3D) || ${CHIPSET_3D} != RIVA && ${CHIPSET_3D} != MGA - @${ECHO} - @${ECHO} You must set the variable CHIPSET_3D to 'RIVA' if you use - @${ECHO} a nvidia RIVA 128, 128ZX, TNT, TNT2 .. based graphics card, - @${ECHO} or to 'MGA' if you use a Matrox G200/G400 graphics adapter - @${FALSE} -.endif -.if defined(GNU_CONFIGURE) - @${ECHO} "=> Adjusting ${WRKSRC}/configure.in .." - @cd ${WRKSRC}; \ - ${SED} -e 's;tclsh;tclsh8\.0;g' \ - configure.in.new; \ - ${MV} configure.in.new configure.in - @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Makefile.in .." - @cd ${WRKSRC}/libGL; \ - ${SED} -e 's;SOGLREV = 1\.0;SOGLREV = 1;' \ - Makefile.in.new; \ - ${MV} Makefile.in.new Makefile.in - @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Makefile.in .." - @cd ${WRKSRC}/servGL/serverglx; \ - ${SED} -e 's;tclsh;tclsh8\.0;g' \ - Makefile.in.new; \ - ${MV} Makefile.in.new Makefile.in -.endif - -# -# after 'configure' -# -# . only for the old IMAKE style configuration -# -post-configure: -.if !defined(GNU_CONFIGURE) - @${ECHO} "Using IMAKE" - @${ECHO} "=> Adjusting ${WRKSRC}/Config .." - @cd ${WRKSRC}; \ - ${SED} -e 's;XSERVTOP = .*;XSERVTOP = ${XFREEDIR};' \ - -e 's;MESATOP = .*;MESATOP = ${MESADIR};' \ - Config; - @${ECHO} "=> Adjusting ${WRKSRC}/libGL/Imakefile .." - @cd ${WRKSRC}/libGL; \ - ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ - ${MV} Imakefile.new Imakefile - @${ECHO} "=> Adjusting ${WRKSRC}/servGL/serverglx/Imakefile .." - @cd ${WRKSRC}/servGL/serverglx; \ - ${SED} -e 's;tclsh;tclsh8\.0;' Imakefile.new; \ - ${MV} Imakefile.new Imakefile -.endif - -# -# before 'build': -# -# . build a glx aware Mesa lib -# . create makefiles (old IMAKE style configuration) -# -pre-build: -.if defined(PATCH_XFREE) - @${ECHO} "=> Building and installing XFree86-${XFREEVER} with GLX support .." - cd ${XFREEDIR}/../..; \ - ${MAKE} all install -.endif -.if defined(PATCH_MESA) - @${ECHO} "=> Building and installing Mesa-${MESAVER} with GLX support .." - cd ${MESADIR}/../..; \ - ${MAKE} all install -.endif -.if !defined(GNU_CONFIGURE) - @${ECHO} "=> Creating makefiles .." - cd ${WRKSRC}; \ - ${XMKMF}; \ - ${MAKE} Makefile; \ - ${MAKE} Makefiles -.endif - -# -# before 'install': -# -# . check for proper installed XFree86 version (3.3.4 or higher) -# . check for glx installation (please deinstall) -# . check for Mesa 3.0 installtion (please deinstall) -# -pre-install: - @${ECHO} "=> Checking XFree86 installation .." - @if \ - pkg_info -e "XFree86-3.3.4"; \ - then \ - ${ECHO} "Found XFree86 3.3.4 - this port should still work"; \ - elif \ - pkg_info -e "XFree86-3.3.5"; \ - then \ - ${ECHO} "OK, found XFree86 3.3.5 - this port should work"; \ - elif \ - pkg_info -e "XFree86-3.3.6"; \ - then \ - ${ECHO} "Found XFree86 3.3.6 - this port should work"; \ - elif \ - pkg_info -e "XFree86-3.3.3.1"; \ - then \ - ${ECHO} ""; \ - ${ECHO} "This port will work only if your XFree86 3.3.3.1 version"; \ - ${ECHO} "has been patched for use with glx!"; \ - ${ECHO} ""; \ - ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \ - ${ECHO} ""; \ - ${ECHO} "(We continue with fingers crossed)"; \ - ${ECHO} ""; \ - else \ - ${ECHO} ""; \ - ${ECHO} "This port depends on having a proper version of XFree86"; \ - ${ECHO} "installed - preferably ${XFREEVER}!"; \ - ${ECHO} ""; \ - ${ECHO} "Visit 'http://people.FreeBSD.org/~3d' for more information"; \ - ${ECHO} ""; \ - ${ECHO} "Aborting.."; \ - ${FALSE} ; \ - fi - -# -# after 'install': -# -# . install some docs -# . move old Mesa lib away (old IMAKE style configuration) -# . check XFree86 configuration file for colordepth (RIVA only) -# . check XFree86 configuration file for glx module -# . give some hints -# -post-install: -.if !defined(NOPORTDOCS) - @${ECHO} "=> Installing documentation .." - ${MKDIR} ${PREFIX}/share/doc/riva-glx - ${INSTALL_MAN} ${DISTDIR}/${DIST_SUBDIR}/riva-x-glx.faq.bz2 ${PREFIX}/share/doc/riva-glx - ${INSTALL_MAN} ${WRKSRC}/README ${PREFIX}/share/doc/riva-glx - ${INSTALL_MAN} ${WRKSRC}/tested.html ${PREFIX}/share/doc/riva-glx - -.endif -.if !defined(GNU_CONFIGURE) - @${ECHO} "=> Adjusting links .." - -${MV} ${X11BASE}/lib/libMesaGL.a ${X11BASE}/lib/libMesaGL.a.old - -${MV} ${X11BASE}/lib/libMesaGL.so.14 ${X11BASE}/lib/libMesaGL.so.14.old - -${LN} -s ${X11BASE}/lib/libGL.a ${X11BASE}/lib/libMesaGL.a - -${LN} -s ${X11BASE}/lib/libGL.so.1 ${X11BASE}/lib/libMesaGL.so.14 -.endif -.if !defined(CHIPSET_3D) || ${CHIPSET_3D} == RIVA - @${ECHO} "=> Checking for \"DefaultColorDepth\" in ${XFCONFIG} .." - @${ECHO} "" - @if \ - ${GREP} '^ *DefaultColorDepth *1[56] *$$' ${XFCONFIG}; \ - then \ - ${ECHO} ""; \ - ${ECHO} "Found something."; \ - else \ - ${ECHO} "Nope, nothing found - please use"; \ - ${ECHO} ""; \ - ${ECHO} " DefaultColorDepth 16"; \ - ${ECHO} ""; \ - ${ECHO} "or"; \ - ${ECHO} ""; \ - ${ECHO} " DefaultColorDepth 15"; \ - ${ECHO} ""; \ - ${ECHO} "in your ${XFCONFIG} file with your RIVA card!"; \ - fi -.endif - @${ECHO} "=> Checking for Section \"Module\" in ${XFCONFIG} .." - @${ECHO} "" - @if \ - ${GREP} -A2 '^ *Section *"Module" *$$' ${XFCONFIG} | \ - ${GREP} -B1 -A1 '^ *Load *"glx\.so" *$$' | \ - ${GREP} -B2 '^ *EndSection *$$' | \ - ${GREP} -A2 '^ *Section *"Module" *$$'; \ - then \ - ${ECHO} ""; \ - ${ECHO} "Looks OK to me."; \ - else \ - ${ECHO} "Nope, not found - please add"; \ - ${ECHO} ""; \ - ${ECHO} " Section \"Module\""; \ - ${ECHO} " Load \"glx.so\""; \ - ${ECHO} " EndSection"; \ - ${ECHO} ""; \ - ${ECHO} "to the end of your ${XFCONFIG} file!"; \ - fi - @${ECHO} "=> Giving last advice .." - @${CAT} ${PKGDIR}/MESSAGE - -.include -- cgit v1.2.3