#-*- tab-width: 4; -*- # ex:ts=4 # # $FreeBSD$ # # Port variables: # USE_QT* - List of Qt modules to depend on, with optional '_build' # and '_run' suffixes. Define it empty to include this file # without depending on Qt ports. # QT_DIST - The port belongs to the Qt distribution. Set to 'yes' for # Qt 4, or to the distribution name(s) for newer versions. # QT_NONSTANDARD - Suppress modification of configure and make environment. # # Global switches (for inclusion into /etc/make.conf): # QT4_OPTIONS - A list of (Qt 4-only) global options; can be CUPS, NAS # and/or QGTKSTYLE. If set, Qt will be built with support # for: # * Common UNIX Printing System (CUPS); # * Network Audio System (NAS); # * GTK+-based Qt theme (QGTKSTYLE). .if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) Qt_Include_MAINTAINER= kde@FreeBSD.org Qt_Pre_Include= bsd.qt.mk # Qt versions currently supported by the framework. _QT_SUPPORTED?= 4 5 QT4_VERSION?= 4.8.7 QT5_VERSION?= 5.4.1 QT_PREFIX?= ${LOCALBASE} _QT_RELNAME= qt${_QT_VERSION:R:R} _QT_VERSION= # empty .for ver in ${_QT_SUPPORTED} . if defined(USE_QT${ver}) . if empty(_QT_VERSION) _QT_VERSION= ${QT${ver}_VERSION} . else # Reject different USE_QT*. IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #' . endif . endif .endfor .if empty(_QT_VERSION) # The file was included without USE_QT*. IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #' .endif .if defined(QT_DIST) QT_NONSTANDARD= yes . if ! ${.MAKEFLAGS:MPREFIX=*} PREFIX= ${QT_PREFIX} . endif MASTER_SITES= ${MASTER_SITE_QT} # Useless, as it must be defined before including bsd.port.pre.mk (at least # because of bsd.options.mk). #PKGNAMEPREFIX?= ${_QT_RELNAME}- DISTINFO_FILE= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo # Can go after a while. CONFLICTS_BUILD=qt-3.* qt-copy-3.* LICENSE?= LGPL21 . if !exists(${PKGDIR}/pkg-descr) DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr . endif # Stage support. DESTDIRNAME= INSTALL_ROOT . if ${_QT_VERSION:M4*} MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/ DISTNAME= qt-everywhere-opensource-src-${_QT_VERSION} DIST_SUBDIR= KDE . else . if ${_QT_VERSION:M*-*} # Pre-releases. MASTER_SITE_SUBDIR= development_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/ . else MASTER_SITE_SUBDIR= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/ . endif DISTNAME= ${QT_DIST:S,^,qt,:S,$,-opensource-src-${_QT_VERSION},} DISTFILES= ${DISTNAME:S,$,${EXTRACT_SUFX},} DIST_SUBDIR= KDE/Qt/${_QT_VERSION} USES+= tar:xz . if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \ defined(DISABLE_SIZE) && defined(NO_CHECKSUM) # Ensure that the "makesum" target (with its inner "fetch" one) uses # devel/qt*/distinfo for every port. QT_DIST= base declarative doc graphicaleffects imageformats \ multimedia quick1 quickcontrols script serialport svg tools \ translations webchannel webkit webkit-examples websockets x11extras xmlpatterns . endif . if ${QT_DIST} == "base" && ${PORTNAME} != "qmake" # Qt configure requires pkg-config to detect dependencies. USES+= pkgconfig # Set QMAKESPEC when building qtbase so that qmake (called by the configure # script) can find the mkspecs we create ourselves in devel/qmake5. CONFIGURE_ENV+= QMAKESPEC="${QMAKESPEC}" MAKE_ENV+= QMAKESPEC="${QMAKESPEC}" . endif # -nomake is only used by qtbase's configure script. # Other ports from other Qt modules will automatically build examples and # tests if the directories exist because of mkspecs/features/qt_parts.prf. EXTRACT_AFTER_ARGS?= ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \ ${DISTNAME:S,$,/tests,:S,^,--exclude ,} . endif # ! ${_QT_VERSION:M4*} CONFIGURE_ENV+= MAKE="${MAKE:T}" CONFIGURE_ARGS+=-opensource -confirm-license \ -platform ${QMAKESPEC} \ -no-pch \ -prefix ${PREFIX} \ -bindir ${PREFIX}/${QT_BINDIR_REL} \ -headerdir ${PREFIX}/${QT_INCDIR_REL} \ -libdir ${PREFIX}/${QT_LIBDIR_REL} \ -plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \ -importdir ${PREFIX}/${QT_IMPORTDIR_REL} \ -datadir ${PREFIX}/${QT_DATADIR_REL} \ -docdir ${PREFIX}/${QT_DOCDIR_REL} \ -translationdir ${PREFIX}/${QT_L10NDIR_REL} \ -sysconfdir ${PREFIX}/${QT_ETCDIR_REL} . if ${_QT_VERSION:M4*} CONFIGURE_ARGS+=-fast \ -system-libjpeg -system-libpng \ -system-libmng -system-libtiff -system-zlib \ -no-phonon-backend \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \ -demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos . else CONFIGURE_ARGS+=-nomake examples -nomake tests \ -archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \ -libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \ -qmldir ${PREFIX}/${QT_QMLDIR_REL} \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \ -testsdir ${PREFIX}/${QT_TESTDIR_REL} . if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2) CONFIGURE_ARGS+=-no-sse2 . endif . endif . if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG) WITH_DEBUG= yes STRIP= # It's done prior to bsd.qt.mk inclusion. CONFIGURE_ARGS+=-debug -separate-debug-info # Override configuration in global qconfig.pri. QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \ QT_CONFIG-="release" PLIST_SUB+= DEBUG="" . else CONFIGURE_ARGS+=-release -no-separate-debug-info QMAKE_ARGS+= QT_CONFIG+="release" \ QT_CONFIG-="debug separate_debug_info" PLIST_SUB+= DEBUG="@comment " . endif . if defined(WANT_QT_VERBOSE_CONFIGURE) CONFIGURE_ARGS+=-verbose . endif . if ${QT_DIST} == "base" || ${_QT_VERSION:M4*} . if ${_QT_VERSION:M4*} _EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h . endif EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool \ ${_EXTRA_PATCHES_QT4} . endif # Override settings installed in qconfig.h and *.pri files. The flags will be # installed along with the port, but have to be passed as arguments while # building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups") # are needed to disable some features. . if !defined(${QT_MODNAME}) || empty(${QT_MODNAME}) # Used for both qconfig-*.h and qt_config_*.pri; it can't be empty. QT_MODNAME= ${PORTNAME} . endif QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix). QT_CONFIG?= # For *.pri files QT_CONFIG flags. . if ${QT_DEFINES} QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}" . if ${QT_DEFINES:N-*} # Use a script to cleanup qconfig-modules.h (see qt-post-install). PKGDEINSTALL= ${WRKDIR}/pkg-deinstall . endif . endif . if ${QT_CONFIG:N-*} QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}" . endif . if ${QT_CONFIG:M-*} QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}" . endif PLIST_SUB+= SHORTVER=${_QT_VERSION:R} \ FULLVER=${_QT_VERSION:C/-.*//} .endif # defined(QT_DIST) .if !defined(QT_NONSTANDARD) CONFIGURE_ENV+= QTDIR="${QT_PREFIX}" QMAKE="${QMAKE}" \ MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \ QMAKESPEC="${QMAKESPEC}" CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \ --with-qt-libraries=${QT_LIBDIR} \ --with-extra-includes=${LOCALBASE}/include \ --with-extra-libs=${LOCALBASE}/lib .endif # !defined(QT_NONSTANDARD) .if ${_QT_VERSION:M4*} QT_BINDIR_REL?= bin QT_LIBDIR_REL?= lib/${_QT_RELNAME} QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports .endif # A wrapper (qtchooser) is used to invoke binaries. QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin QT_INCDIR_REL?= include/${_QT_RELNAME} QT_LIBDIR_REL?= lib QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME} QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME} QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml QT_DATADIR_REL?=share/${_QT_RELNAME} QT_DOCDIR_REL?= share/doc/${_QT_RELNAME} QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations QT_ETCDIR_REL?= etc/xdg QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME} QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests # Not customizable. .if ${_QT_VERSION:M4*} QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs _QT_LIBVER= # empty _QT_BINSUFX= -${_QT_RELNAME} .else QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs _QT_LIBVER= ${_QT_VERSION:R:R} _QT_BINSUFX= # empty .endif LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX} LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX} MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX} RCC?= ${QT_BINDIR}/rcc UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX} QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX} # Needed to redefine the qmake target for internal Qt configuration. _QMAKE?= ${QMAKE} QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER} # The whole Qt distribution should be built with the same compiler, but it's # better to support custom settings. Dereferencing the detection allows to # avoid forking a shell on each inclusion of this file, and to catch any CXX # customization (via USE_GCC, etc.). QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac) # Import QMAKE_ENV and QMAKE_ARGS definitions. USES+= qmake:_env PLIST_SUB+= QT_PREFIX="${QT_PREFIX}" .for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \ QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC QT_${dir}DIR= ${QT_PREFIX}/${QT_${dir}DIR_REL} PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}" .endfor .endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) .if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include) Qt_Post_Include= bsd.qt.mk _USE_QT_ALL= assistant clucene dbus declarative designer gui help \ imageformats linguist linguisttools multimedia network opengl pixeltool \ qdbusviewer qmake script scripttools sql sql-ibase sql-mysql \ sql-odbc sql-pgsql sql-sqlite2 sql-sqlite3 svg testlib webkit \ xml xmlpatterns _USE_QT4_ONLY= accessible assistant-adp assistantclient codecs-cn codecs-jp \ codecs-kr codecs-tw corelib demo doc graphicssystems-opengl \ help-tools iconengines inputmethods l10n makeqpf moc phonon \ phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \ qtestlib qvfb rcc uic uic3 xmlpatterns-tool _USE_QT5_ONLY= buildtools concurrent core graphicaleffects \ paths phonon4 printsupport qdbus qdoc qev qml quick \ quickcontrols serialport uitools webchannel websockets \ widgets x11extras accessible_PORT= accessibility/${_QT_RELNAME}-accessible accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so assistant_PORT= devel/${_QT_RELNAME}-assistant assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX} assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp assistant-adp_PATH= ${QT_BINDIR}/assistant_adp assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient assistantclient_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}AssistantClient.so buildtools_PORT= devel/${_QT_RELNAME}-buildtools buildtools_PATH= ${MOC} clucene_PORT= textproc/clucene-${_QT_RELNAME} clucene_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}CLucene.so codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so codecs-kr_PORT= korean/${_QT_RELNAME}-codecs-kr codecs-kr_PATH= ${QT_PLUGINDIR}/codecs/libqkrcodecs.so codecs-tw_PORT= chinese/${_QT_RELNAME}-codecs-tw codecs-tw_PATH= ${QT_PLUGINDIR}/codecs/libqtwcodecs.so concurrent_PORT= devel/${_QT_RELNAME}-concurrent concurrent_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Concurrent.so core_PORT= devel/${_QT_RELNAME}-core core_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Core.so corelib_PORT= devel/${_QT_RELNAME}-corelib corelib_PATH= ${core_PATH} dbus_PORT= devel/dbus-${_QT_RELNAME} dbus_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}DBus.so declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative declarative_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Declarative.so demo_PORT= misc/${_QT_RELNAME}-qtdemo demo_PATH= ${QT_BINDIR}/qtdemo designer_PORT= devel/${_QT_RELNAME}-designer designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX} doc_PORT= misc/${_QT_RELNAME}-doc doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R} graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so gui_PORT= x11-toolkits/${_QT_RELNAME}-gui gui_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Gui.so help_PORT= devel/${_QT_RELNAME}-help help_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Help.so help-tools_PORT= devel/${_QT_RELNAME}-help-tools help-tools_PATH= ${QT_BINDIR}/qhelpgenerator iconengines_PORT= graphics/${_QT_RELNAME}-iconengines iconengines_PATH= ${QT_PLUGINDIR}/iconengines/libqsvgicon.so imageformats_PORT= graphics/${_QT_RELNAME}-imageformats imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so linguist_PORT= devel/${_QT_RELNAME}-linguist linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX} linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools linguisttools_PATH= ${LRELEASE} l10n_PORT= misc/${_QT_RELNAME}-l10n l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R} makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX} moc_PORT= devel/${_QT_RELNAME}-moc moc_PATH= ${MOC} multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia multimedia_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Multimedia.so network_PORT= net/${_QT_RELNAME}-network network_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Network.so opengl_PORT= graphics/${_QT_RELNAME}-opengl opengl_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}OpenGL.so paths_PORT= sysutils/${_QT_RELNAME}-qtpaths paths_PATH= ${QT_BINDIR}/qtpaths pixeltool_PORT= graphics/${_QT_RELNAME}-pixeltool pixeltool_PATH= ${QT_BINDIR}/pixeltool phonon_PORT= multimedia/phonon phonon_PATH= ${QT_LIBDIR}/libphonon.so phonon4_PORT= multimedia/${_QT_RELNAME}-phonon4 phonon4_PATH= ${QT_LIBDIR}/libphonon4${_QT_RELNAME}.so phonon-gst_PORT= multimedia/phonon-gstreamer phonon-gst_PATH= ${QT_PLUGINDIR}/phonon_backend/libphonon_gstreamer.so porting_PORT= devel/${_QT_RELNAME}-porting porting_PATH= ${QT_BINDIR}/qt3to4 printsupport_PORT= print/${_QT_RELNAME}-printsupport printsupport_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}PrintSupport.so qdbus_PORT= devel/${_QT_RELNAME}-qdbus qdbus_PATH= ${QT_BINDIR}/qdbus qdbusviewer_PORT= devel/${_QT_RELNAME}-qdbusviewer qdbusviewer_PATH= ${QT_BINDIR}/qdbusviewer qdoc_PORT= devel/${_QT_RELNAME}-qdoc qdoc_PATH= ${QT_BINDIR}/qdoc qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3 qdoc3_PATH= ${QT_BINDIR}/qdoc3 qev_PORT= x11/${_QT_RELNAME}-qev qev_PATH= ${QT_BINDIR}/qev qmake_PORT= devel/qmake${_QT_VERSION:R:R} qmake_PATH= ${QMAKE} qml_PORT= lang/${_QT_RELNAME}-qml qml_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Qml.so qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer qmlviewer_PATH= ${QT_BINDIR}/qmlviewer qt3support_PORT= devel/${_QT_RELNAME}-qt3support qt3support_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}3Support.so qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX} qtestlib_PORT= ${testlib_PORT} qtestlib_PATH= ${testlib_PATH} quick_PORT= x11-toolkits/${_QT_RELNAME}-quick quick_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Quick.so quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir qvfb_PORT= devel/${_QT_RELNAME}-qvfb qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX} rcc_PORT= devel/${_QT_RELNAME}-rcc rcc_PATH= ${RCC} script_PORT= devel/${_QT_RELNAME}-script script_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Script.so scripttools_PORT= devel/${_QT_RELNAME}-scripttools scripttools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}ScriptTools.so serialport_PORT= comms/${_QT_RELNAME}-serialport serialport_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}SerialPort.so sql_PORT= databases/${_QT_RELNAME}-sql sql_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Sql.so sql-pgsql_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlpsql.so .if ${_QT_VERSION:M4*} sql-sqlite2_PORT= databases/${_QT_RELNAME}-sqlite-plugin .endif sql-sqlite3_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlite.so .for db in ibase mysql odbc pgsql sqlite2 sqlite3 .if ${_QT_VERSION:M4*} sql-${db}_PORT?= databases/${_QT_RELNAME}-${db}-plugin .else sql-${db}_PORT?= databases/${_QT_RELNAME}-sqldrivers-${db} .endif sql-${db}_PATH?= ${QT_PLUGINDIR}/sqldrivers/libqsql${db:C/^sql//}.so .endfor svg_PORT= graphics/${_QT_RELNAME}-svg svg_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Svg.so testlib_PORT= devel/${_QT_RELNAME}-testlib testlib_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Test.so uic_PORT= devel/${_QT_RELNAME}-uic uic_PATH= ${UIC} uic3_PORT= devel/${_QT_RELNAME}-uic3 uic3_PATH= ${QT_BINDIR}/uic3 uitools_PORT= devel/${_QT_RELNAME}-uitools uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a webchannel_PORT= www/${_QT_RELNAME}-webchannel webchannel_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}WebChannel.so websockets_PORT= www/${_QT_RELNAME}-websockets websockets_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}WebSockets.so webkit_PORT= www/webkit-${_QT_RELNAME} webkit_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}WebKit.so widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets widgets_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Widgets.so x11extras_PORT= x11/${_QT_RELNAME}-x11extras x11extras_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}X11Extras.so xml_PORT= textproc/${_QT_RELNAME}-xml xml_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}Xml.so xmlpatterns_PORT= textproc/${_QT_RELNAME}-xmlpatterns xmlpatterns_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}XmlPatterns.so xmlpatterns-tool_PORT= textproc/${_QT_RELNAME}-xmlpatterns-tool xmlpatterns-tool_PATH= ${QT_BINDIR}/xmlpatterns _USE_QT_ALL+= ${_USE_QT${_QT_VERSION:R:R}_ONLY} .for comp in ${_USE_QT_ALL} ${comp}_BUILD_DEPENDS?= ${${comp}_PATH}:${PORTSDIR}/${${comp}_PORT} ${comp}_RUN_DEPENDS?= ${${comp}_PATH}:${PORTSDIR}/${${comp}_PORT} ${comp}_build_BUILD_DEPENDS?= ${${comp}_BUILD_DEPENDS} ${comp}_run_RUN_DEPENDS?= ${${comp}_RUN_DEPENDS} _USE_QT_ALL_SUFFIXED+= ${comp} ${comp}_build ${comp}_run .endfor _USE_QT= ${USE_QT${_QT_VERSION:R:R}} .for comp in ${_USE_QT:O:u} . if ${_USE_QT_ALL_SUFFIXED:M${comp}} BUILD_DEPENDS+= ${${comp}_BUILD_DEPENDS} RUN_DEPENDS+= ${${comp}_RUN_DEPENDS} . else IGNORE?= can't be installed: unknown USE_QT${_QT_VERSION:R:R} component '${comp}' #' . endif .endfor .if defined(QT_DIST) && ! ${_QT_VERSION:M4*} . if ${QT_DIST} == "base" # qtbase requires some tools to be symlinked to the build directory. _QT_TOOLS= # empty . if ${PORTNAME} != "qmake" _QT_TOOLS+= ${QMAKE} . endif . if ${PORTNAME} != "buildtools" _QT_TOOLS+= ${MOC} ${RCC} . endif . if ${PORTNAME} != "qdoc" _QT_TOOLS+= qdoc . endif . if ${PORTNAME} != "dbus" _QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp . endif . if ${PORTNAME} != "widgets" _QT_TOOLS+= ${UIC} . endif pre-configure: qtbase-pre-configure qtbase-pre-configure: . for tool in ${_QT_TOOLS} @${TEST} -e ${QT_BINDIR}/${tool:T} && \ ${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \ ${TRUE} . endfor # Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out # certain paths from pkg-config calls (see the explanation in # devel/qt5/files/patch-configure) as well as for setting # QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for # ports/194088. post-patch: qtbase-post-patch qtbase-post-patch: ${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \ ${WRKSRC}/configure . if ${PORTNAME} != "qmake" _QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake post-configure: qmake-configure . endif . endif # ${QT_DIST} == "base" # Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that # requires tests/auto/cmake to be present, otherwise the configure stage will # fail. # Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same # time, we have to disable the check in a cache file (the only way to get this # value through to the configure script in qtbase). pre-configure: qt5-pre-configure qt5-pre-configure: ${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${WRKSRC}/.qmake.cache pre-install: qt-pre-install qt-pre-install: # Search both in CONFIGURE_WRKSRC and WRKSRC, as the former is not # a subdirectory of the latter for out-of-source builds. @${FIND} ${WRKSRC} ${CONFIGURE_WRKSRC} -name "Makefile*" -type f | \ ${XARGS} ${REINPLACE_CMD} -e 's,${PREFIX}/${QT_LIBDIR_REL}/pkgconfig,${PREFIX}/libdata/pkgconfig,g' post-install: qt-post-install qt-post-install: . if ${QT_DEFINES:N-*} # We can't use SUB_FILES with a shared pkg-deinstall.in. # We need it to be a script instead of a group of @unexecs, otherwise # qconfig-modules.h cleanup will be run in pre-deinstall stage, which is # useless. This will probably be replaced by a Keywords/ script in the future. @${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \ -e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/${FILESDIR:T}/${PKGDEINSTALL:T}.in > \ ${PKGDEINSTALL} @${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules @${ECHO_CMD} -n \ > ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h . for def in ${QT_DEFINES:N-*:O:u:C/=.*$//} @${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h ${ECHO_CMD} "# define QT_${def}" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h @${ECHO_CMD} "#endif" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h @${ECHO_CMD} \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h . endfor @${ECHO_CMD} "${QT_PREFIX}/${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \ >> ${TMPPLIST} @${ECHO_CMD} "@exec echo '#include ' >> ${QT_PREFIX}/${QT_INCDIR_REL}/QtCore/qconfig-modules.h" \ >> ${TMPPLIST} . endif # ${QT_DEFINES:N-*} . if ${QT_CONFIG:N-*} @${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules ${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \ > ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri @${ECHO_CMD} "${QT_PREFIX}/${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \ >> ${TMPPLIST} . endif # ${QT_CONFIG:N-*} .endif # defined(QT_DIST) && ! ${_QT_VERSION:M4*} .endif # defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)