# New ports collection makefile for:	subversion
# Date created:				10 September 2001
# Whom:					rooneg@electricjellyfish.net
#
# $FreeBSD$

PORTNAME=	subversion
PORTVERSION=	0.32.1
CATEGORIES=	devel
MASTER_SITES=	http://svn.collab.net/tarballs/

MAINTAINER=	lev@freebsd.org
COMMENT=	Version control system

LIB_DEPENDS=	db4:${PORTSDIR}/databases/db4 \
		neon.24:${PORTSDIR}/www/neon \
		expat.4:${PORTSDIR}/textproc/expat2

INSTALLS_SHLIB=	yes

WRKSRC=	${WRKDIR}/subversion-${PORTVERSION}
GNU_CONFIGURE=	yes
USE_REINPLACE=	yes
CONFIGURE_TARGET=	--build=${MACHINE_ARCH}-portbld-freebsd${OSREL}
CONFIGURE_ARGS=	--with-ssl \
		--with-neon=${LOCALBASE} \
		--with-berkeley-db=${LOCALBASE}/include/db4:${LOCALBASE}/lib \
		--with-swig=no

MAN1=		svn.1 svnadmin.1 svnlook.1 svndumpfilter.1 svnserve.1 svnversion.1
MANCOMPRESSED=	no

.include <bsd.port.pre.mk>

SVNREPOS?=	/home/svn/repos
APXS=		${LOCALBASE}/sbin/apxs

.if defined(WITH_MOD_DAV_SVN)
WITH_APACHE2_APR=	yes
CONFIGURE_ARGS+= \
		--with-apxs=${APXS}
PLIST_SUB+=	MOD_DAV_SVN=""
SVNGROUP?=	www
.else
PLIST_SUB+=	MOD_DAV_SVN="@comment "
PKGDEINSTALL=	NONEXISTENT
SVNGROUP?=	svn
.endif

.if defined(WITH_APACHE2_APR)
APACHE2_PORT?=	${PORTSDIR}/www/apache2
BUILD_DEPENDS+=	${APXS}:${APACHE2_PORT}
RUN_DEPENDS+=	${APXS}:${APACHE2_PORT}
CONFIGURE_ARGS+=--with-apr=${LOCALBASE}/lib/apache2/apr-config \
		--with-apr-util=${LOCALBASE}/lib/apache2/apu-config
.else
LIB_DEPENDS+=  apr-0.9:${PORTSDIR}/devel/apr
CONFIGURE_ARGS+=--with-apr=${LOCALBASE} \
		--with-apr-util=${LOCALBASE}
.endif

.if defined(WITH_SVNSERVE_WRAPPER)
PLIST_SUB+=	SVNSERVE_WRAPPER=""
EXTRA_PATCHES=	${PATCHDIR}/build-outputs.mk.patch
.else
PLIST_SUB+=	SVNSERVE_WRAPPER="@comment "
.endif

pre-extract:
.if !defined (BATCH)
	@${ECHO_MSG} "!!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!"
	@${ECHO_MSG} ""
	@${ECHO_MSG} "If you upgrade Subversion from pre-0.28.0 version, please,"
	@${ECHO_MSG} "dump you repository with old (pre-0.28.0) svnadmin command."
	@${ECHO_MSG} "After this, install new version, remove old repository, create new"
	@${ECHO_MSG} "one with svnadmin & load dump created from old repository"
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Versions after 0.28.0 have different repository format and"
	@${ECHO_MSG} "your old repository could not be used with versions 0.28.0 and up."
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Read"
	@${ECHO_MSG} "http://svn.collab.net/repos/svn/trunk/notes/repos_upgrade_HOWTO"
	@${ECHO_MSG} "for details."
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Did you dump you repository and ready to install new version?"
	@${ECHO_MSG} ""
	@${ECHO_MSG} "!!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!"
	@${ECHO_MSG} ""
	@sleep 5
.endif
.if defined(WITH_MOD_DAV_SVN)
	@${ECHO_MSG} "mod_dav_svn module for Apache 2.X enabled."
.else
	@${ECHO_MSG} "You can enable the mod_dav_svn module for Apache 2.X"
	@${ECHO_MSG} "by defining WITH_MOD_DAV_SVN.  This option implies"
	@${ECHO_MSG} "the WITH_APACHE2_APR option."
.endif
	@${ECHO_MSG}
.if defined(WITH_APACHE2_APR)
	@${ECHO_MSG} "Using APR from www/apache2.  If you have the devel/apr"
	@${ECHO_MSG} "port/package installed, you may need to remove it."
.else
	@${ECHO_MSG} "You can link subversion against the APR built with"
	@${ECHO_MSG} "the www/apache2 port, rather than the devel/apr port,"
	@${ECHO_MSG} "by defining WITH_APACHE2_APR."
.endif
	@${ECHO_MSG}
.if defined(WITH_SVNSERVE_WRAPPER)
	@${ECHO_MSG} "svnserve wrapper enabled."
.else
	@${ECHO_MSG} "You can install the svnserve wrapper (sets umask 002)"
	@${ECHO_MSG} "by defining WITH_SVNSERVE_WRAPPER."
.endif
	@${ECHO_MSG}
.if defined(WITH_REPOSITORY_CREATION)
	@${ECHO_MSG} "I will create (or use, if it exists) \"${SVNGROUP}\" group."
	@${ECHO_MSG} "Make sure that all commiters are its members."
.else
	@${ECHO_MSG} "You can have the repository created for you by defining"
	@${ECHO_MSG} "WITH_REPOSITORY_CREATION."
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Make sure that:"
	@${ECHO_MSG} "* all your svn users are members of a common group"
	@${ECHO_MSG} "* this group is the group id of the db/ and locks/"
	@${ECHO_MSG} "  subdirectories of your repository"
	@${ECHO_MSG} "* the above subdirectories are writable by this group"
	@${ECHO_MSG} ""
	@${ECHO_MSG} "Repository will be created at '${SVNREPOS}' with group '${SVNGROUP}'"
	@${ECHO_MSG} "You could change tese settings by defining SVNREPOS and SVNGROUP"
	@${ECHO_MSG} ""
.endif
	@${ECHO_MSG}

post-extract:
	@${REINPLACE_CMD} 's/ldb/ldb4/g' ${WRKSRC}/configure

	@${RM} -r ${WRKSRC}/neon
	@${RM} -r ${WRKSRC}/apr
	@${RM} -r ${WRKSRC}/apr-util

.if defined(WITH_MOD_DAV_SVN)
pre-install:
	${APXS} -e -S LIBEXECDIR=${PREFIX}/libexec/apache2 -a -n dav libexec/apache2/mod_dav.so
.endif

post-install:
.if !defined(NOPORTDOCS)
	${MKDIR} ${DOCSDIR}
	for f in BUGS CHANGES COMMITTERS COPYING HACKING INSTALL README; do \
		${INSTALL_DATA} ${WRKSRC}/$$f ${DOCSDIR}; \
	done
.endif
.if defined(WITH_SVNSERVE_WRAPPER)
	@${INSTALL_SCRIPT} ${FILESDIR}/svnserve.wrapper ${PREFIX}/bin/svnserve
.endif
.if defined(WITH_REPOSITORY_CREATION) && !exists(${SVNREPOS})
. if defined(WITH_SVNSERVE_WRAPPER)
	@if /usr/sbin/pw groupshow "${SVNGROUP}" >/dev/null 2>&1; then \
	    echo "You already have a group \"${SVNGROUP}\", so I will use it."; \
	else \
	    if /usr/sbin/pw groupadd ${SVNGROUP} -h -; \
	    then \
	        echo "Added group \"${SVNGROUP}\"."; \
	    else \
	        echo "Adding group \"${SVNGROUP}\" failed..."; \
	        echo "Please create it, and try again."; \
	        ${FALSE}; \
	    fi; \
	fi
. endif
	@${MKDIR} ${SVNREPOS}
	@${PREFIX}/bin/svnadmin create ${SVNREPOS}
	@${CHGRP} ${SVNGROUP} ${SVNREPOS}/db ${SVNREPOS}/locks/db.lock ${SVNREPOS}/dav
	@${CHMOD} g+w ${SVNREPOS}/db ${SVNREPOS}/locks/db.lock ${SVNREPOS}/dav
	@for i in ${SVNREPOS}/db/* ; do \
	    i=$${i##*/}; \
	    case $$i in \
	    DB_CONFIG) ;; \
	    *) ${CHGRP} ${SVNGROUP} ${SVNREPOS}/db/$$i; \
	       ${CHMOD} g+w ${SVNREPOS}/db/$$i; \
	       ;; \
	    esac; \
	done
.endif

post-deinstall:
.if defined(WITH_MOD_DAV_SVN)
	@PKG_PREFIX=${PREFIX} ${SH} ${PKGDEINSTALL} ${PKGNAME} POST-DEINSTALL
.endif

.include <bsd.port.post.mk>