--- mtools.conf.orig	Sun May 20 20:18:12 2001
+++ mtools.conf	Thu Oct  7 22:14:36 2004
@@ -1,6 +1,67 @@
 # Example mtools.conf files.  Uncomment the lines which correspond to
 # your architecture and comment out the "SAMPLE FILE" line below
-SAMPLE FILE
+
+# A note on permissions:  a user must have read and write permissions for the
+# devices named here in order to access the DOS file systems.  You might give
+# ALL USERS access to ALL FLOPPY DISKS via the command
+#
+#     chmod a+rw /dev/fd[0-9]*
+#
+# or you might give SPECIFIC GROUP MEMBERS access to a PARTICULAR FLOPPY DISK
+# via the commands
+#
+#     chmod g+rw /dev/fd0 ; chgrp staff /dev/fd0
+#
+# (and ensure selected people are in a group such as staff).
+
+
+# Floppy disks.  Here, A: and B: use automatic size detection.
+#
+# Example: To prepare drive A: for use as a 1.44M floppy on FreeBSD:
+#   [1] low level format with ......... fdformat -f 1440 /dev/fd0
+#   [2] write a file system with ...... newfs_msdos -f 1440 /dev/fd0
+#   [3] then use mcopy/mdir etc. in the usual way.
+#
+# The mformat command could also be used to build the DOS file system
+# in place of newfs_msdos.
+
+# # FreeBSD floppy drives
+drive a: file="/dev/fd0"
+drive b: file="/dev/fd1"
+
+# FreeBSD automatically detects a number of common floppy densities, like
+# 720 KB and 1440 KB MS-DOS formatted media.
+#
+# To change the density of FreeBSD floppy devices to something unusual,
+# use fdcontrol(8).
+
+# LS120 (ATAPI) floppy disk               (extra parameters allow easy mformat)
+#
+# -- Drive L: is an LS120 in 100MB mode   (mdir shows 125967576 bytes capacity)
+#
+drive l: file="/dev/afd0" exclusive mformat_only cylinders=963 heads=8 sectors=32
+#
+# -- Drive M: is an LS120 in 1.4MB mode
+#
+drive m: file="/dev/afd0" exclusive mformat_only cylinders=80 heads=2 sectors=18
+
+# SCSI hard disks
+#  first disk (da0) slice 1 (s1)
+#drive c: file="/dev/da0s1"
+
+# IDE hard disks
+#   first disk on the first IDE interface (wd0) slice 1 (s1)
+drive c: file="/dev/ad0s1"
+#   first disk on the first IDE interface (wd0) slice 3 (s3)
+#drive d: file="/dev/ad0s3"
+#  second disk on the first IDE interface (wd1) slice 1 (s1)
+#drive d: file="/dev/ad1s1"
+#  first disk on the second IDE interface (wd2) slice 1 (s1)
+drive d: file="/dev/ad2s1"
+
+# PCEMU floppy boot image
+drive p: file="/usr/local/lib/pcemu/DriveA"
+
 
 # # Linux floppy drives
 # drive a: file="/dev/fd0" exclusive
@@ -61,4 +122,4 @@
 
 # # uncomment the following line to display all file names in lower
 # # case by default
-# mtools_lower_case=1
+mtools_lower_case=1
--- devices.c.orig	Thu Oct  7 22:12:00 2004
+++ devices.c	Thu Oct  7 22:16:46 2004
@@ -790,10 +790,10 @@
 #ifdef OS_freebsd
 #define predefined_devices
 struct device devices[] = {
-	{"/dev/fd0.1440", 'A', FHD312},
-	{"/dev/fd0.720",  'A', FDD312},
-	{"/dev/fd1.1200", 'B', MHD514},
-	{"/dev/sd0s1",     'C', GENHD},
+	{"/dev/fd0",   'A', FHD312},
+	{"/dev/fd0",   'A', FDD312},
+	{"/dev/fd1",   'B', MHD514},
+	{"/dev/da0s1", 'C', GENHD},
 	REMOTE
 };
 #endif /* __FreeBSD__ */