--- dovecot-example.conf.orig	Wed Apr 12 11:37:30 2006
+++ dovecot-example.conf	Fri Apr 28 23:23:22 2006
@@ -9,7 +9,7 @@
 # Default values are shown after each value, it's not required to uncomment
 # any of the lines. Exception to this are paths, they're just examples
 # with real defaults being based on configure options. The paths listed here
-# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+# are for configure --prefix=%%PREFIX%% --sysconfdir=%%PREFIX%%/etc --localstatedir=/var
 # --with-ssldir=/etc/ssl
 
 # Base directory where to store runtime data.
@@ -17,7 +17,7 @@
 
 # Protocols we want to be serving:
 #  imap imaps pop3 pop3s
-#protocols = imap imaps
+protocols = imap pop3
 
 # IP or host address where to listen in for connections. It's not currently
 # possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
@@ -124,7 +124,7 @@
 
 # Set max. process size in megabytes. If you don't use
 # login_process_per_connection you might need to grow this.
-#login_process_size = 32
+login_process_size = 64
 
 # Should each login be processed in it's own process (yes), or should one
 # login process be allowed to process multiple connections (no)? Yes is more
@@ -173,7 +173,7 @@
 # Show more verbose process titles (in ps). Currently shows user name and
 # IP address. Useful for seeing who are actually using the IMAP processes
 # (eg. shared mailboxes or if same uid is used for multiple accounts).
-#verbose_proctitle = no
+verbose_proctitle = yes
 
 # Show protocol level SSL errors.
 #verbose_ssl = no
@@ -189,12 +189,12 @@
 # non-valid GID as primary group ID aren't allowed to log in. If user
 # belongs to supplementary groups with non-valid GIDs, those groups are
 # not set.
-#first_valid_gid = 1
+first_valid_gid = 0
 #last_valid_gid = 0
 
 # Grant access to these extra groups for mail processes. Typical use would be
 # to give "mail" group write access to /var/mail to be able to create dotlocks.
-#mail_extra_groups =
+mail_extra_groups = mail
 
 # ':' separated list of directories under which chrooting is allowed for mail
 # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
@@ -230,7 +230,7 @@
 #   default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u
 #   default_mail_env = mbox:/var/mail/%d/%n/:INDEX=/var/indexes/%d/%n
 #
-#default_mail_env = 
+default_mail_env = mbox:/var/mail/%u
 
 # If you need to set multiple mailbox locations or want to change default
 # namespace settings, you can do it by defining namespace sections:
@@ -439,19 +439,19 @@
 
 protocol imap {
   # Login executable location.
-  #login_executable = /usr/libexec/dovecot/imap-login
+  #login_executable = %%PREFIX%%/libexec/dovecot/imap-login
 
   # IMAP executable location. Changing this allows you to execute other
   # binaries before the imap process is executed.
   #
   # This would write rawlogs into ~/dovecot.rawlog/ directory:
-  #   mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap
+  #   mail_executable = %%PREFIX%%/libexec/dovecot/rawlog %%PREFIX%%/libexec/dovecot/imap
   #
   # This would attach gdb into the imap process and write backtraces into
   # /tmp/gdbhelper.* files:
-  #   mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
+  #   mail_executable = %%PREFIX%%/libexec/dovecot/gdbhelper %%PREFIX%%/libexec/dovecot/imap
   #
-  #mail_executable = /usr/libexec/dovecot/imap
+  #mail_executable = %%PREFIX%%/libexec/dovecot/imap
 
   # Maximum IMAP command line length in bytes. Some clients generate very long
   # command lines with huge mailboxes, so you may need to raise this if you get
@@ -461,7 +461,7 @@
   # Support for dynamically loadable plugins. mail_plugins is a space separated
   # list of plugins to load.
   #mail_plugins = 
-  #mail_plugin_dir = /usr/lib/dovecot/imap
+  #mail_plugin_dir = %%PREFIX%%/lib/dovecot/imap
 
   # Send IMAP capabilities in greeting message. This makes it unnecessary for
   # clients to request it with CAPABILITY command, so it saves one round-trip.
@@ -492,7 +492,7 @@
   #     but not both. Thunderbird separates these two by forcing server to
   #     accept '/' suffix in mailbox names in subscriptions list.
   # The list is space-separated.
-  #imap_client_workarounds = outlook-idle
+  imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep
 }
   
 ##
@@ -501,10 +501,10 @@
 
 protocol pop3 {
   # Login executable location.
-  #login_executable = /usr/libexec/dovecot/pop3-login
+  #login_executable = %%PREFIX%%/libexec/dovecot/pop3-login
 
   # POP3 executable location
-  #mail_executable = /usr/libexec/dovecot/pop3
+  #mail_executable = %%PREFIX%%/libexec/dovecot/pop3
 
   # Don't try to set mails non-recent or seen with POP3 sessions. This is
   # mostly intended to reduce disk I/O. With maildir it doesn't move files
@@ -547,7 +547,7 @@
   # installations. %08Xu%08Xv will be the new default, so use it for new
   # installations.
   #
-  #pop3_uidl_format = 
+  pop3_uidl_format = %08Xu%08Xv
 
   # POP3 logout format string:
   #  %t - number of TOP commands
@@ -562,7 +562,7 @@
   # Support for dynamically loadable plugins. mail_plugins is a space separated
   # list of plugins to load.
   #mail_plugins = 
-  #mail_plugin_dir = /usr/lib/dovecot/pop3
+  #mail_plugin_dir = %%PREFIX%%/lib/dovecot/pop3
 
   # Workarounds for various client bugs:
   #   outlook-no-nuls:
@@ -572,7 +572,7 @@
   #     Outlook Express and Netscape Mail breaks if end of headers-line is
   #     missing. This option simply sends it if it's missing.
   # The list is space-separated.
-  #pop3_client_workarounds = 
+  pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
 }
 
 ##
@@ -580,7 +580,7 @@
 ##
 
 # Executable location
-#auth_executable = /usr/libexec/dovecot/dovecot-auth
+#auth_executable = %%PREFIX%%/libexec/dovecot/dovecot-auth
 
 # Set max. process size in megabytes.
 #auth_process_size = 256