# Created by: Edwin Groothuis <edwin@mavetju.org>
# $FreeBSD$

PORTNAME=	pvr250
PORTVERSION=	20101010
PORTREVISION=	1
CATEGORIES=	multimedia kld
MASTER_SITES=	http://www.mavetju.org/download/adopted/
DISTFILES=	${CXMSHAR} hcwPVRP2.sys ${PVRTOOLS}.tar.gz
IGNOREFILES=	hcwPVRP2.sys	# Varies from month to month

MAINTAINER=	edwin@mavetju.org
COMMENT=	Hauppauge PVR-250/350 TV cards driver for the cxm device

CONFLICTS=	pvrxxx-*

PVRTOOLS=	pvr250-1.2
CXMSHAR=	cxm-${PORTVERSION}.shar

WRKSRC=		${WRKDIR}
NOFETCHFILES=	hcwPVRP2.sys

RESTRICTED_FILES=	hcwPVRP2.sys
RESTRICTED=	This port uses a binary driver which is owned by Hauppauge

MAN4=		cxm.4
MAN1=		pvr250-setchannel.1
PORTDOCS=	cxm.txt

.include <bsd.port.pre.mk>

MODULESDIR=	/boot/kernel
PLIST_SUB=	MODULESDIR=${MODULESDIR}

#.if ${OSVERSION} >= 700031
#EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-dev::cxm::cxm.h \
#		${PATCHDIR}/extra-patch-dev::cxm::cxm.c
#.endif

.if !exists(${DISTDIR}/hcwPVRP2.sys)
IGNORE=		You need the file hcwPVRP2.sys from the CD coming with the PVR-250/350 card. Please place this file in ${DISTDIR} and run make again.
.endif

.if !exists(${SRC_BASE}/sys/dev/iicbus/iicbb.c)
IGNORE=		You need the kernel sources installed to build this module.
.endif

patch-iicbb:
	@if [ -z "`${GREP} cxm_iic /usr/src/sys/dev/iicbus/iicbb.c`" ]; then \
	    ${PATCH} -d/sys <${WRKDIR}/dev/cxm/Patch.iicbb-fbsd5; \
	    ${ECHO_CMD} "Patched /usr/src/sys/dev/iicbus/iicbb.c"; \
	else \
	    ${ECHO_CMD} "/usr/src/sys/dev/iicbus/iicbb.c was already patched"; \
	fi

do-extract:
	${MKDIR} ${WRKDIR}
	cd ${WRKDIR}; \
	${SH} ${DISTDIR}/${CXMSHAR}; \
	${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/${PVRTOOLS}.tar.gz ${EXTRACT_AFTER_ARGS};

post-patch:
	${REINPLACE_CMD} -e 's/tuner0/cxm0/' \
		${WRKDIR}/${PVRTOOLS}/setchannel.c

do-configure:
	cd ${WRKDIR}/dev/cxm; \
	${CC} -Wall -o cxm_extract_fw cxm_extract_fw.c; \
	./cxm_extract_fw ${DISTDIR}/hcwPVRP2.sys

do-build:
	cd ${WRKDIR}/modules/cxm; ${MAKE}
	cd ${WRKDIR}/${PVRTOOLS}; ${MAKE}

do-install:
	${INSTALL_KLD} ${WRKDIR}/modules/cxm/cxm/cxm.ko ${MODULESDIR}
	${INSTALL_KLD} ${WRKDIR}/modules/cxm/cxm_iic/cxm_iic.ko ${MODULESDIR}
	${INSTALL_MAN} ${WRKDIR}/${PVRTOOLS}/cxm.4 ${PREFIX}/man/man4/cxm.4
	${INSTALL_MAN} ${WRKDIR}/${PVRTOOLS}/pvr250-setchannel.1 ${PREFIX}/man/man1/pvr250-setchannel.1
	${INSTALL_PROGRAM} ${WRKDIR}/${PVRTOOLS}/setchannel ${PREFIX}/bin/pvr250-setchannel
	${MKDIR} ${DOCSDIR}
	${INSTALL_DATA} ${FILESDIR}/cxm.txt ${DOCSDIR}

.include <bsd.port.post.mk>