# $FreeBSD$ # # Please read and meditate on netgraph(4), ipacctctl(8) and ngctl(8). # Enable ng_ipacct (i.e. enable run startup script "ng_ipacct.sh") #ng_ipacct_enable="YES" # Enable kernel modules loading. # On "ng_ipacct.sh start" all kernel modules specified # in ${ng_ipacct_modules_list} will be loaded. # Note: on "ng_ipacct.sh stop" only "ng_ipacct" will be unloaded. ng_ipacct_modules_load="YES" # Netgraph can load required ng_* modules automatically on the hook creation # - except for "ng_ether". Generally, modules preloading is recommended. # Do not add to this list modules which are statically compiled into kernel. #ng_ipacct_modules_list="netgraph ng_ether ng_cisco ng_socket ng_tee ng_ipacct" ng_ipacct_modules_list="netgraph ng_ether ng_ipacct" # List of monitored interfaces. For each interface additional vars must be # specified in corresponding variables 'ng_ipacct_IFACE_*'. # See examples below. #ng_ipacct_interfaces="xl0 cx0 vpn0" # Default start/stop scripts. # # Single quotes are required to preserve newlines. # '%%iface%%' will be automatically expanded with a relevant interface. # This feature should be applied to use indentical rules # for similar interfaces. ng_ipacct_default_ether_start=' mkpeer %%iface%%: tee lower right name %%iface%%:lower %%iface%%_tee connect %%iface%%: lower upper left mkpeer %%iface%%_tee: ipacct right2left %%iface%%_in name %%iface%%_tee:right2left %%iface%%_ip_acct connect %%iface%%_tee: %%iface%%_ip_acct: left2right %%iface%%_out ' ng_ipacct_default_ether_stop=' shutdown %%iface%%_ip_acct: shutdown %%iface%%_tee: shutdown %%iface%%: ' ng_ipacct_bpf_ether_start=' mkpeer %%iface%%: tee lower right name %%iface%%:lower %%iface%%_tee connect %%iface%%: lower upper left mkpeer %%iface%%_tee: bpf right2left %%iface%%_in name %%iface%%_tee:right2left %%iface%%_bpf connect %%iface%%_tee: right2left left2right %%iface%%_out mkpeer %%iface%%_bpf: ipacct %%iface%%_match_in %%iface%%_in name %%iface%%_bpf:%%iface%%_match_in %%iface%%_ip_acct connect %%iface%%_bpf: %%iface%%_ip_acct: %%iface%%_match_out %%iface%%_out ' ng_ipacct_bpf_ether_stop=' shutdown %%iface%%_ip_acct: shutdown %%iface%%_bpf: shutdown %%iface%%_tee: shutdown %%iface%%: ' # EXAMPLE 1. Ethernet interface # +-------------------------------+ # | | # (upper) (left2right)-----------(xl0_in) # | | | | # xl0 +--(left)-xl0_tee-(right) xl0_ip_acct # | | | | # (lower) | (right2left)-----------(xl0_out) # | | # +----------+ # # xl0 - ng_ether # xl0_tee - ng_tee # xl0_ip_acct - ng_ipacct # Configuration for 'xl0_ip_acct' node: ng_ipacct_xl0_dlt="EN10MB" # required line; see ipacctctl(8) ng_ipacct_xl0_threshold="15000" # '5000' by default ng_ipacct_xl0_verbose="yes" # 'yes' by default ng_ipacct_xl0_saveuid="yes" # 'no' by default ng_ipacct_xl0_savetime="no" # 'no' by default ng_ipacct_xl0_start=${ng_ipacct_default_ether_start} ng_ipacct_xl0_stop=${ng_ipacct_default_ether_stop} ng_ipacct_xl0_checkpoint_script="path/to/your/script --checkpoint-and-save xl0" # this script is called on "stop" (to save accumulated # data) or via "rc.d/ng_ipacct.sh checkpoint" # EXAMPLE 2. Cronyx Sigma WAN adapter with HDLC encapsulation # cx0_hdlc-(downstream)----(rawdata)-cx0 # | # (inet) (left2right)--------------------(cx0_in) # | | | # (left)-cx0_tee-(right)---(inet)-ng0 cx0_ip_acct # | | # (right2left)--------------------(cx0_out) # # cx0 - ng_cx # cx0_hdlc - ng_cisco # cx0_tee - ng_tee # cx0_ip_acct - ng_ipacct # Configuration for 'cx0_ip_acct' node: ng_ipacct_cx0_dlt="RAW" ng_ipacct_cx0_start=' mkpeer %%iface%%: cisco rawdata downstream name %%iface%%:rawdata %%iface%%_hdlc mkpeer %%iface%%_hdlc: tee inet left name %%iface%%_hdlc:inet %%iface%%_tee mkpeer %%iface%%_tee: iface right inet mkpeer %%iface%%_tee: ipacct right2left %%iface%%_in name %%iface%%_tee:right2left %%iface%%_ip_acct connect %%iface%%_tee: %%iface%%_ip_acct: left2right %%iface%%_out ' ng_ipacct_cx0_stop=' shutdown %%iface%%_ip_acct: shutdown %%iface%%_tee: shutdown %%iface%%_hdlc: ' # EXAMPLE 3. PPTP (via mpd), divert traffic to ng_ksocket # ipfw add tee 4001 ip from any to any via ng0 in # ipfw add tee 4002 ip from any to any via ng0 out # USER-LEVEL | KERNEL-LEVEL # | # div4 *.4001 ------> | ----> ks_vpn0_in # | | # | (inet/raw/divert)------(vpn0_in) # | | # | vpn0_ip_acct # | | # | (inet/raw/divert)------(vpn0_out) # | | # div4 *.4002 ------> | ----> ks_vpn0_out # # ks_vpn0_in - ng_ksocket # ks_vpn0_out - ng_ksocket # vpn0_ip_acct - ng_ipacct ng_ipacct_vpn0_dlt="RAW" ng_ipacct_vpn0_start=' mkpeer ipacct dummy dummy name .:dummy %%iface%%_ip_acct mkpeer %%iface%%_ip_acct: ksocket %%iface%%_in inet/raw/divert name %%iface%%_ip_acct:%%iface%%_in ks_%%iface%%_in msg ks_%%iface%%_in: bind inet/0.0.0.0:4001 mkpeer %%iface%%_ip_acct: ksocket %%iface%%_out inet/raw/divert name %%iface%%_ip_acct:%%iface%%_out ks_%%iface%%_out msg ks_%%iface%%_out: bind inet/0.0.0.0:4002 rmhook .:dummy ' ng_ipacct_vpn0_stop=' shutdown %%iface%%_ip_acct: ' # EXAMPLE 4. Ethernet interface with BPF # +-------------------------------+ # | | # (upper) (left2right)-----(xl0_in) (xl0_match_in)----(xl0_in) # | | | | | | # xl0 +--(left)-xl0_tee-(right) xl0_bpf xl0_ip_acct # | | | | | | # (lower) | (right2left)----(xl0_out) (xl0_match_out)--(xl0_out) # | | # +----------+ # # xl0 - ng_ether # xl0_tee - ng_tee # xl0_bpf - ng_bpf # xl0_ip_acct - ng_ipacct # Configuration for 'xl0_ip_acct' node: ng_ipacct_xl0_dlt="EN10MB" # required line; see ipacctctl(8) ng_ipacct_xl0_threshold="15000" # '5000' by default ng_ipacct_xl0_verbose="yes" # 'yes' by default ng_ipacct_xl0_saveuid="yes" # 'no' by default ng_ipacct_xl0_savetime="no" # 'no' by default ng_ipacct_xl0_start=${ng_ipacct_bpf_ether_start} ng_ipacct_xl0_stop=${ng_ipacct_bpf_ether_stop} ng_ipacct_xl0_checkpoint_script="path/to/your/script --checkpoint-and-save xl0" # this script is called on "stop" (to save accumulated # data) or via "rc.d/ng_ipacct.sh checkpoint" ng_ipacct_xl0_afterstart_script="path/to/your/script --load-bpf-filters xl0" # this script is called just after initialization # of nodes to load filters into xl0_bpf # EXAMPLE 5. Really _divert_ traffic to ng_ksocket # ipfw add divert 4001 ip from any to any via em0 in # ipfw add divert 4002 ip from any to any via em0 out # USER-LEVEL | KERNEL-LEVEL # | # div4 *.4001 ->|-> ipfw_ks_in in-(ipfw_echo_in) # | | | # | (inet/raw/divert)---(left)-(ipfw_tee_in)-right # | | # | left2right---(ipfw_in) # | | # | ipfw_ip_acct # | | # | left2right---(ipfw_out) # | | # | (inet/raw/divert)---(left)-(ipfw_tee_out)-right # | | | # div4 *.4002 ->|-> ipfw_ks_out out-(ipfw_echo_out) # # ipfw_ks_in - ng_ksocket # ipfw_ks_out - ng_ksocket # ipfw_tee_in - ng_tee # ipfw_tee_out - ng_tee # ipfw_ip_acct - ng_ipacct # ipfw_echo_in - ng_echo # ipfw_echo_out - ng_echo ng_ipacct_ks_start=' mkpeer ipacct dummy dummy name .:dummy %%iface%%_ip_acct mkpeer %%iface%%_ip_acct: tee %%iface%%_in left2right name %%iface%%_ip_acct:%%iface%%_in %%iface%%_tee_in mkpeer %%iface%%_ip_acct: tee %%iface%%_out left2right name %%iface%%_ip_acct:%%iface%%_out %%iface%%_tee_out mkpeer %%iface%%_tee_in: echo right in name %%iface%%_tee_in:right %%iface%%_echo_in mkpeer %%iface%%_tee_out: echo right out name %%iface%%_tee_out:right %%iface%%_echo_out mkpeer %%iface%%_tee_in: ksocket left inet/raw/divert name %%iface%%_tee_in:left %%iface%%_ks_in msg %%iface%%_ks_in: bind inet/0.0.0.0:4001 mkpeer %%iface%%_tee_out: ksocket left inet/raw/divert name %%iface%%_tee_out:left %%iface%%_ks_out msg %%iface%%_ks_out: bind inet/0.0.0.0:4002 rmhook .:dummy ' ng_ipacct_ks_stop=' shutdown %%iface%%_ks_in: shutdown %%iface%%_ks_out: shutdown %%iface%%_tee_in: shutdown %%iface%%_tee_out: ' ng_ipacct_ks_dlt="RAW" # required line; see ipacctctl(8) ng_ipacct_ks_threshold="15000" # '5000' by default ng_ipacct_ks_verbose="yes" # 'yes' by default ng_ipacct_ks_saveuid="yes" # 'no' by default ng_ipacct_ks_savetime="no" # 'no' by default ng_ipacct_ks_checkpoint_script="path/to/your/script --checkpoint-and-save ks" # this script is called on "stop" (to save accumulated # data) or via "rc.d/ng_ipacct.sh checkpoint"