# New ports collection makefile for:	ghostscript
# Date created:		Tue Jun 10 21:58:54 CEST 1997
# Whom:			Andreas Klemm <andreas@klemm.gtn.com>
#
# $FreeBSD$
#

PORTNAME=	ghostscript
PORTVERSION=	6.01
PORTREVISION=	1
CATEGORIES=	print
MASTER_SITES=	ftp://ftp.cs.wisc.edu/ghost/aladdin/gs601/ \
		ftp://ftp.cs.wisc.edu/ghost/aladdin/fonts/ \
		http://www.ozemail.com.au/~geoffk/pdfencrypt/ \
		http://www.proaxis.com/~mgelhaus/linux/software/hp880c/1.31/ \
		ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/ \
		http://www.harsch.net/Download/
DISTFILES=	${GS_SOURCES} ${GS_FONTS_STD} ${GS_FONTS_OTHER} \
		${DECRYPT_PDF} ${HP8XX_DRV} ${HPDJ_DRV} ${HP970_DRV}
EXTRACT_ONLY=	${GS_SOURCES} ${HPDJ_DRV}

MAINTAINER=	andreas@FreeBSD.org

BUILD_DEPENDS=	${NONEXISTENT}:${PORTSDIR}/graphics/jpeg:extract
LIB_DEPENDS=	png.4:${PORTSDIR}/graphics/png

WRKSRC=		${WRKDIR}/gs${PORTVERSION}
USE_XLIB=	yes
USE_GMAKE=	yes
MAKEFILE=	src/unix-gcc.mak
PLIST_SUB=	GS_VERSION=${PORTVERSION}
# Note: the order that the manpages are listed here matters because
# some of them are symbolic links
MAN1=		gs.1 dvipdf.1 font2c.1 eps2eps.1 gsbj.1 gsdj.1 gsdj500.1 \
		gslj.1 gslp.1 gsnd.1 pdf2dsc.1 pdf2ps.1 pf2afm.1 \
		pfbtopfa.1 printafm.1 ps2ascii.1 ps2epsi.1 ps2pdf12.1 \
		ps2pdf13.1 ps2pdf.1 ps2pdfwr.1 ps2ps.1 wftopfa.1 \
		gs-hpdj.1

GS_SOURCES=	ghostscript-${PORTVERSION}.tar.gz
#  Note: the following two are real files that have symlinks with
#  later version numbers pointing to them.  To avoid unnecessarily
#  downloading distfiles, do not change these when upgrading the port
#  unless the files really change.
GS_FONTS_STD=	ghostscript-fonts-std-6.0.tar.gz
GS_FONTS_OTHER=	ghostscript-fonts-other-6.0.tar.gz

# Additional Drivers:

# http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
HP8XX_DRV=	gdevcd8.tar.gz

# HPDJ, additional driver for HP PCL3 Printers, by Martin Lottermoser
# ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html
HPDJ_DRV=	hpdj-2.6.tar.gz

# additional driver for HP DeskJet 970, supports duplex printing
HP970_DRV=	gdevdj9.c.gz

# contributed uniprint profiles
CONTRIB_UPP=	lqx70ch.upp lqx70cl.upp lqx70cm.upp \
		stc740ih.upp stc740p.upp stc740pl.upp

# replacement for pdf_sec.ps, that allows you to read encrypted PDF files
DECRYPT_PDF=	pdf_sec.ps

.if defined(A4)
CFLAGS+=	-DA4
.endif

pre-fetch:
.if !defined(A4)
	@${ECHO_MSG} "Type \"make A4=yes\" if you want -DA4 for compilation."
.else
	@${ECHO_MSG} "Using -DA4 for compilation."
.endif

post-extract:
	@${LN} -s ${WRKDIRPREFIX}${.CURDIR}/../../graphics/jpeg/work/jpeg-6b \
		${WRKSRC}/jpeg
	@${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${HP8XX_DRV}
	@${TAR} -C ${WRKSRC}/src -xzf ${DISTDIR}/${HPDJ_DRV}
# additional HPDJ driver
	@${TAR} -C ${WRKSRC}/src -xf ${WRKDIR}/hpdj-2.6/hpdj.tar
	@${CAT} ${WRKSRC}/src/contrib.mak-5.94.add >> ${WRKSRC}/src/contrib.mak
	@${PATCH} -d ${WRKSRC}/src --forward --quiet -E \
		< ${WRKSRC}/src/zmedia2.c-5.50.diff
	@${CP} ${DISTDIR}/${HP970_DRV} ${WRKSRC}/src
	@${GUNZIP_CMD} ${WRKSRC}/src/${HP970_DRV}
	@${CAT} ${FILESDIR}/dj970.contrib.mak >> ${WRKSRC}/src/contrib.mak

do-configure:
.if defined(BATCH)
	@${SETENV} WRKSRC=${WRKSRC} ${SH} ${SCRIPTDIR}/configure.batch
.else
	@${SETENV} WRKSRC=${WRKSRC} ${SH} ${SCRIPTDIR}/configure
.endif

pre-build:
	@${MKDIR} ${WRKSRC}/obj
	@${MKDIR} ${WRKSRC}/bin

pre-install:
	@${MKDIR} ${PREFIX}/share/ghostscript
	${TAR} -C ${PREFIX}/share/ghostscript -xzf ${DISTDIR}/${GS_FONTS_STD}
	${TAR} -C ${PREFIX}/share/ghostscript -xzf ${DISTDIR}/${GS_FONTS_OTHER}

post-install:
	@strip ${PREFIX}/bin/gs
	${INSTALL_SCRIPT} ${WRKSRC}/lib/unix-lpr.sh ${PREFIX}/bin
	${INSTALL_SCRIPT} ${WRKSRC}/lib/lprsetup.sh ${PREFIX}/bin
	@${MKDIR} ${PREFIX}/libexec/lpr
	${INSTALL_SCRIPT} ${WRKSRC}/src/if-hpdj ${PREFIX}/libexec/lpr
	${INSTALL_MAN} ${WRKSRC}/src/gs-hpdj.1 ${PREFIX}/man/man1
.for i in ${CONTRIB_UPP}
	${INSTALL_DATA} ${FILESDIR}/${i} \
		${PREFIX}/share/ghostscript/${PORTVERSION}/lib
.endfor
	${INSTALL_DATA} ${DISTDIR}/pdf_sec.ps \
		${PREFIX}/share/ghostscript/${PORTVERSION}/lib
.if !defined(NOPORTDOCS)
	@${MKDIR} ${PREFIX}/share/ghostscript/hpdj
.for i in LGPL.txt NEWS README.hpdj example.mdf hpdj.html margins-A4.ps \
	margins-A4Rotated.ps margins-Letter.ps margins-LetterRotated.ps
	${INSTALL_DATA} ${WRKSRC}/src/${i} ${PREFIX}/share/ghostscript/hpdj

.endfor
.endif

.include <bsd.port.mk>