# New ports collection makefile for: squid24 # Date created: Tue Mar 27 14:56:08 CEST 2001 # Whom: Adrian Chadd # # $FreeBSD$ # # Tunables not (yet) configurable via 'make config': # SQUID_{U,G}ID # Which user/group Squid should run as (default: squid/squid). # The user and group will be created if they do not already exist using # a uid:gid of 100:100. # NOTE: older versions of Squid defaulted to nobody/nogroup. # If you wish to run Squid as "nobody" (which is not recommended), please # define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment # before you start the update or installation of this port. # # SQUID_LANGUAGES # A list of languages for which error page files should be installed # (default: all) # # E.g. use `make SQUID_LANGUAGES="English French"' if you want to # install the files for these languages only. # Use `make -VSQUID_LANGUAGES' or scroll down to this variable's # definition to see which values are valid. # # SQUID_DEFAULT_LANG # If you define SQUID_LANGUAGES, select which language should be the default # one (this variable defaults to English). This setting can be overwritten # with squid.conf's error_directory directive. # # SQUID_CONFIGURE_ARGS # Additional configuration options. # # To enable them, use e.g # `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' # # The list below may be incomplete, please see the configure script # in the Squid source distribution for the complete list of additional # options. # Note that you probably do not need to worry about these options in most # cases, they are included in case you want to experiment with them. # # --enable-dlmalloc # Compile and use the malloc package from Doug Lea # --enable-xmalloc-statistics # Show malloc statistics in status page # --enable-cachemgr-hostname=some.hostname # Make cachemgr.cgi default to this host # --disable-unlinkd # Do not use "unlinkd" # --with-aufs-threads=N_THREADS # Tune the number of worker threads for the aufs object # --with-coss-membuf-size # COSS membuf size (default: 1048576 bytes) # --with-filedescriptors=N # Force Squid to use N filedescriptors. # --enable-ntlm-fail-open # Enable NTLM fail open, where a helper that fails one of the # Authentication steps can allow Squid to still authenticate the user # --enable-x-accelerator-vary # Enable support for the X-Accelerator-Vary HTTP header. Can be used # to indicate variance within an accelerator setup. Typically used # together with other code that adds custom HTTP headers to the # requests. PORTNAME= squid PORTVERSION= 3.0.p6.${PATCHSET_DATE} CATEGORIES= www MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ ftp://ftp.vistech.net/pub/squid/%SUBDIR%/ \ ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \ ftp://ftp.belnet.be/packages/squid/pub/%SUBDIR%/ \ ftp://ftp.nl.uu.net/pub/unix/www/squid/%SUBDIR%/ \ ftp://ftp.mirrorservice.org/sites/ftp.squid-cache.org/pub/%SUBDIR%/ \ ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \ ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} MASTER_SITE_SUBDIR= squid-3/DEVEL DISTNAME= squid-3.0.PRE6 DIST_SUBDIR= squid3.0 PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \ http://www2.us.squid-cache.org/%SUBDIR%/ \ http://www3.us.squid-cache.org/%SUBDIR%/ \ http://www1.at.squid-cache.org/%SUBDIR%/ \ http://www2.nl.squid-cache.org/%SUBDIR%/ \ http://www1.ru.squid-cache.org/%SUBDIR%/ \ http://www1.uk.squid-cache.org/%SUBDIR%/ \ http://www1.jp.squid-cache.org/%SUBDIR%/ \ http://www1.tw.squid-cache.org/%SUBDIR%/ PATCH_SITE_SUBDIR= Versions/v3/3.0/changesets # Inspired by editors/vim: # (I know that portlint is not happy with this, but putting this code at any # other location makes it even unhappier.) PATCHSET_DATE= 20070623 FIRST_PATCHSET= 10789 LAST_PATCHSET= 10865 IGNORE_PATCHSETS= 10792 10793 10794 10795 10796 10798 10799 10803 10807 \ 10810 10814 10819 10835 10842 10847 10862 10864 PATCHFILES!= jot -w "%d.patch" - ${FIRST_PATCHSET} ${LAST_PATCHSET} 1 .for ps in ${IGNORE_PATCHSETS} PATCHFILES:= ${PATCHFILES:N${ps}\.patch} .endfor PATCH_DIST_STRIP= -p1 MAINTAINER= tmseck@netcologne.de COMMENT= HTTP Caching Proxy (development version) LATEST_LINK= squid30 CONFLICTS= squid-2.[0-9].* GNU_CONFIGURE= yes USE_AUTOTOOLS= autoconf:259 automake:19 libtool:15 USE_BZIP2= yes USE_PERL5= yes USE_RC_SUBR= squid SQUID_UID?= squid SQUID_GID?= squid MAN8= cachemgr.cgi.8 squid.8 docs= QUICKSTART README RELEASENOTES.html doc/debug-sections.txt PORTDOCS= ${docs:T} PORTEXAMPLES= * SUB_FILES+= pkg-deinstall pkg-install pkg-message SUB_LIST+= SQUID_UID=${SQUID_UID} SQUID_GID=${SQUID_GID} OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ SQUID_SASL_AUTH "Install SASL authentication helpers" off \ SQUID_DELAY_POOLS "Enable delay pools" off \ SQUID_SNMP "Enable SNMP support" off \ SQUID_CARP "Enable CARP support" on \ SQUID_SSL "Enable SSL support for reverse proxies" off \ SQUID_PINGER "Install the icmp helper" off \ SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ SQUID_HTCP "Enable HTCP support" off \ SQUID_VIA_DB "Enable forward/via database" off \ SQUID_CACHE_DIGESTS "Enable cache digests" off \ SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ SQUID_WCCPV2 "Enable Web Cache Coordination Prot. v2" off \ SQUID_STRICT_HTTP "Be strictly HTTP compliant" off \ SQUID_IDENT "Enable ident (RFC 931) lookups" on \ SQUID_REFERER_LOG "Enable Referer-header logging" off \ SQUID_USERAGENT_LOG "Enable User-Agent-header logging" off \ SQUID_ARP_ACL "Enable ACLs based on ethernet address" off \ SQUID_IPFW "Enable transparent proxying with IPFW" off \ SQUID_PF "Enable transparent proxying with PF" off \ SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ SQUID_ICAP "Enable ICAP client functionality" off \ SQUID_ESI "Enable ESI support (experimental)" off \ SQUID_AUFS "Enable the aufs storage scheme" off \ SQUID_COSS "Enable the COSS storage scheme" off \ SQUID_KQUEUE "Use kqueue(2) (experimental)" on \ SQUID_LARGEFILE "Support log and cache files >2GB" off \ SQUID_STACKTRACES "Create backtraces on fatal errors" off \ SQUID_DEBUG "Enable debugging options" off etc_files= squid/cachemgr.conf.default \ squid/mib.txt squid/mime.conf.default \ squid/msntauth.conf.default squid/squid.conf.default icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ anthony-box2.gif anthony-c.gif anthony-compressed.gif \ anthony-dir.gif anthony-dirup.gif anthony-dvi.gif \ anthony-f.gif anthony-image.gif anthony-image2.gif \ anthony-layout.gif anthony-link.gif anthony-movie.gif \ anthony-pdf.gif anthony-portal.gif anthony-ps.gif \ anthony-quill.gif anthony-script.gif anthony-sound.gif \ anthony-tar.gif anthony-tex.gif anthony-text.gif \ anthony-unknown.gif anthony-xbm.gif anthony-xpm.gif error_files= ERR_ACCESS_DENIED ERR_CACHE_ACCESS_DENIED \ ERR_CACHE_MGR_ACCESS_DENIED ERR_CANNOT_FORWARD \ ERR_CONNECT_FAIL ERR_DNS_FAIL ERR_ESI ERR_FORWARDING_DENIED \ ERR_FTP_DISABLED ERR_FTP_FAILURE ERR_FTP_FORBIDDEN \ ERR_FTP_NOT_FOUND ERR_FTP_PUT_CREATED \ ERR_FTP_PUT_ERROR ERR_FTP_PUT_MODIFIED ERR_FTP_UNAVAILABLE \ ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \ ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \ ERR_ONLY_IF_CACHED_MISS ERR_READ_ERROR ERR_READ_TIMEOUT \ ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT libexec= cachemgr.cgi db_auth.pl digest_pw_auth diskd ip_user_check \ msnt_auth ncsa_auth ntlm_auth \ pam_auth smb_auth smb_auth.sh squid_session squid_unix_group \ wbinfo_group.pl .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" libexec+= unlinkd .endif sbin= RunAccel RunCache squidclient squid CONFIGURE_ARGS= --bindir=${PREFIX}/sbin \ --sbindir=${PREFIX}/sbin \ --datadir=${PREFIX}/etc/squid \ --libexecdir=${PREFIX}/libexec/squid \ --localstatedir=${PREFIX}/squid \ --sysconfdir=${PREFIX}/etc/squid \ --enable-removal-policies="lru heap" \ --disable-linux-netfilter \ --disable-linux-tproxy \ --disable-epoll .include # Authentication methods and modules: basic_auth= DB NCSA PAM MSNT SMB digest_auth= password external_acl= ip_user session unix_group wbinfo_group MAN8+= pam_auth.8 squid_session.8 squid_unix_group.8 .if defined(WITH_SQUID_LDAP_AUTH) USE_OPENLDAP= yes CFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib MAN8+= squid_ldap_auth.8 squid_ldap_group.8 basic_auth+= LDAP digest_auth+= ldap external_acl+= ldap_group libexec+= digest_ldap_auth squid_ldap_auth squid_ldap_group .endif .if defined(WITH_SQUID_SASL_AUTH) LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2 CFLAGS+= -I${LOCALBASE}/include CPPFLAGS+= -I${LOCALBASE}/include LDFLAGS+= -L${LOCALBASE}/lib basic_auth+= SASL libexec+= sasl_auth .endif .if !defined(NO_NIS) && !defined(WITHOUT_NIS) basic_auth+= YP libexec+= yp_auth .endif CONFIGURE_ARGS+= --enable-auth="basic ntlm digest" \ --enable-basic-auth-helpers="${basic_auth}" \ --enable-digest-auth-helpers="${digest_auth}" \ --enable-external-acl-helpers="${external_acl}" \ --enable-ntlm-auth-helpers="SMB" # Storage schemes: storage_schemes= ufs diskd null .if defined(WITH_SQUID_AUFS) storage_schemes+= aufs # Only document switching from libpthread to libthr using libmap.conf # where lipthread is the default threading library: .if (${OSVERSION} >= 501000) && (${OSVERSION} < 700041) EXTRA_PATCHES+= ${PATCHDIR}/extra-patch-src-cf.data.pre.aufs .endif # Nil aufs threads is default, set any other value via SQUID_CONFIGURE_ARGS CONFIGURE_ARGS+= --with-pthreads CFLAGS+= ${PTHREAD_CFLAGS} .endif .if defined(WITH_SQUID_COSS) storage_schemes+= coss .endif CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" # Other options set via 'make config': .if defined(WITH_SQUID_DELAY_POOLS) CONFIGURE_ARGS+= --enable-delay-pools .endif .if defined(WITH_SQUID_SNMP) CONFIGURE_ARGS+= --enable-snmp .endif .if defined(WITHOUT_SQUID_CARP) CONFIGURE_ARGS+= --disable-carp .endif .if defined(WITH_SQUID_SSL) # we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only # works when it is defined before bsd.port{.pre}.mk is .included. # This makes it currently impossible to combine this macro with OPTIONS to # conditionally include OpenSSL support. .include "${PORTSDIR}/Mk/bsd.openssl.mk" CONFIGURE_ARGS+= --enable-ssl \ --with-openssl="${OPENSSLBASE}" CFLAGS+= -I${OPENSSLINC} LDFLAGS+= -L${OPENSSLLIB} .endif .if defined(WITH_SQUID_PINGER) CONFIGURE_ARGS+= --enable-icmp libexec+= pinger .endif .if defined(WITH_SQUID_DNS_HELPER) CONFIGURE_ARGS+= --disable-internal-dns libexec+= dnsserver .endif .if defined(WITH_SQUID_HTCP) CONFIGURE_ARGS+= --enable-htcp .endif .if defined(WITH_SQUID_VIA_DB) CONFIGURE_ARGS+= --enable-forw-via-db .endif .if defined(WITH_SQUID_CACHE_DIGESTS) CONFIGURE_ARGS+= --enable-cache-digests .endif .if defined(WITHOUT_SQUID_WCCP) CONFIGURE_ARGS+= --disable-wccp .endif .if defined(WITH_SQUID_WCCPV2) CONFIGURE_ARGS+= --enable-wccpv2 .endif .if defined(WITH_SQUID_STRICT_HTTP) CONFIGURE_ARGS+= --disable-http-violations .endif .if defined(WITHOUT_SQUID_IDENT) CONFIGURE_ARGS+= --disable-ident-lookups .endif .if defined(WITH_SQUID_REFERER_LOG) CONFIGURE_ARGS+= --enable-referer-log .endif .if defined(WITH_SQUID_USERAGENT_LOG) CONFIGURE_ARGS+= --enable-useragent-log .endif .if defined(WITH_SQUID_ARP_ACL) CONFIGURE_ARGS+= --enable-arp-acl .endif .if defined(WITH_SQUID_IPFW) CONFIGURE_ARGS+= --enable-ipfw-transparent .endif .if defined(WITH_SQUID_PF) CONFIGURE_ARGS+= --enable-pf-transparent .if ${OSVERSION} < 502106 IGNORE= pf available only in FreeBSD 5.3 and newer .endif .endif # IPFilter-headers are not installed on FreeBSD 4 since 4.7-RELEASE, # they were not installed on FreeBSD 5 from 2002-03-26 (OSVERSION > 500032) to # 2003-06-27 (OSVERSION < 501101). # # Please see PR misc/44148 and the CVS log of src/include/Makefile for further # information. .if defined(WITH_SQUID_IPFILTER) .if (${OSVERSION} >= 470000 && ${OSVERSION} < 500000) || (${OSVERSION} > 500032 && ${OSVERSION} < 501101) IGNORE= the IPFilter headers are not part of the base system .else CONFIGURE_ARGS+= --enable-ipf-transparent .endif .endif .if defined(WITH_SQUID_ICAP) CONFIGURE_ARGS+= --enable-icap-client .endif .if defined(WITH_SQUID_ESI) CONFIGURE_ARGS+= --enable-esi LIB_DEPENDS+= xml2:${PORTSDIR}/textproc/libxml2 .endif .if defined(WITHOUT_SQUID_KQUEUE) # Squid-3's kqueue support is still marked as experimental, so it is not yet # enabled automatically as in Squid-2. We are explicit about disabling it, # nonetheless: CONFIGURE_ARGS+= --disable-kqueue .else CONFIGURE_ARGS+= --enable-kqueue .endif .if defined(WITH_SQUID_LARGEFILE) CONFIGURE_ARGS+= --with-large-files .endif .if defined(WITH_SQUID_STACKTRACES) CONFIGURE_ARGS+= --enable-stacktraces CFLAGS+= -g STRIP= .endif .if defined(WITH_SQUID_DEBUG) || defined(WITH_DEBUG) # TODO: are there other useful options that can/should be set to help # the developers in debugging failures? CONFIGURE_ARGS+= --disable-optimizations WITH_DEBUG?= yes .endif # Languages: # # If you do not define SQUID_LANGUAGES yourself, all available language files # will be installed; the default language will be English. SQUID_LANGUAGES?= Azerbaijani Bulgarian Catalan Czech Danish Dutch \ English Estonian Finnish French German Greek Hebrew \ Hungarian Italian Japanese Korean Lithuanian \ Polish Portuguese Romanian Russian-1251 Russian-koi8-r \ Serbian Simplify_Chinese Slovak Spanish Swedish \ Traditional_Chinese Turkish SQUID_DEFAULT_LANG?= English CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ --enable-default-err-language=${SQUID_DEFAULT_LANG} # Finally, add additional user specified configuration options: CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} CONFIGURE_ENV+= CFLAGS="${CFLAGS}" \ CPPFLAGS="${CPPFLAGS}"\ LDFLAGS="${LDFLAGS}" PLIST_DIRS= etc/squid/icons libexec/squid PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} .for d in ${SQUID_LANGUAGES} PLIST_DIRS+= etc/squid/errors/${d} PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} .endfor PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid pre-patch: # special handling for PatchSet 10817 that relies on metadata information # supplied by a non applicable earlier patch; can be removed when the port # is updated to a post-pre6 tarball: @${REINPLACE_CMD} -e 's|v 1.453 2007/05/09 22:14:24 wessels|v 1.454 2007/05/13 10:57:41 hno|' \ -e 's|\(Revision:\) 1.453|\1 1.454|' \ ${WRKSRC}/configure.in post-patch: # add this version's datestamp so that Squid identifies itself as patched-up: @${REINPLACE_CMD} -e 's|3.0.PRE6|&+PatchSets-${PATCHSET_DATE}|' \ ${WRKSRC}/configure.in @${REINPLACE_CMD} -e 's|%%SQUID_UID%%|${SQUID_UID}|g' \ -e 's|%%SQUID_GID%%|${SQUID_GID}|g' \ -e 's|%%PREFIX%%|${PREFIX}|g' ${WRKSRC}/src/cf.data.pre @${REINPLACE_CMD} -e 's|%%LOCALBASE%%|${LOCALBASE}|g' \ ${WRKSRC}/helpers/basic_auth/SMB/Makefile.in \ ${WRKSRC}/helpers/basic_auth/SMB/smb_auth.sh pre-install: # Prevent installation of .orig files by deleting them. @${FIND} ${WRKSRC} -name '*.bak' -delete @${FIND} ${WRKSRC} -name '*.orig' -delete pre-su-install: @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} PRE-INSTALL post-install: # Create cachemgr.conf.default manually since Squid-3's install routine # unfortunately fails to do so (as it did in the old 2.5 days...): ${INSTALL_DATA} ${WRKSRC}/tools/cachemgr.conf \ ${PREFIX}/etc/squid/cachemgr.conf.default @${MKDIR} ${EXAMPLESDIR} ${INSTALL_DATA} ${WRKSRC}/helpers/basic_auth/DB/passwd.sql ${EXAMPLESDIR} .if defined(WITH_SQUID_PINGER) ${CHMOD} 4510 ${PREFIX}/libexec/squid/pinger; \ ${CHGRP} ${SQUID_GID} ${PREFIX}/libexec/squid/pinger .endif .if !defined(NOPORTDOCS) @${MKDIR} ${DOCSDIR} cd ${WRKSRC} && ${INSTALL_DATA} ${docs} ${DOCSDIR} .endif @${SETENV} PKG_PREFIX=${PREFIX} \ ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL @${ECHO_CMD} "===> post-installation information for ${PKGNAME}:" @${ECHO_CMD} "" @${CAT} ${PKGMESSAGE} @${ECHO_CMD} "" .include