diff options
Diffstat (limited to 'contrib/isc-dhcp/client/Makefile.dist')
| -rw-r--r-- | contrib/isc-dhcp/client/Makefile.dist | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/contrib/isc-dhcp/client/Makefile.dist b/contrib/isc-dhcp/client/Makefile.dist deleted file mode 100644 index 2b261a7e4610b..0000000000000 --- a/contrib/isc-dhcp/client/Makefile.dist +++ /dev/null @@ -1,137 +0,0 @@ -# Makefile.dist -# -# Copyright (c) 1996, 1997, 1999 The Internet Software Consortium. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of The Internet Software Consortium nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND -# CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, -# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL -# THE INTERNET SOFTWARE CONSORTIUM OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED -# OF THE POSSIBILITY OF SUCH DAMAGE. -# - -CATMANPAGES = dhclient.cat8 dhclient.conf.cat5 dhclient-script.cat8 \ - dhclient.leases.cat5 -SEDMANPAGES = dhclient.man8 dhclient.conf.man5 dhclient-script.man8 \ - dhclient.leases.man5 -SRCS = dhclient.c clparse.c -OBJS = dhclient.o clparse.o -PROG = dhclient -MAN = dhclient.8 dhclient.conf.5 dhclient-script.8 dhclient.leases.5 - -DEBUG = -g -INCLUDES = -I.. -I../includes -DHCPLIB = ../common/libdhcp.a -CFLAGS = $(DEBUG) $(PREDEFINES) $(INCLUDES) $(COPTS) \ - -DCLIENT_PATH=${CLIENT_PATH} - -all: $(PROG) $(CATMANPAGES) - -install: all - for dir in $(CLIENTBINDIR) $(ETC) $(FFMANDIR) $(ADMMANDIR) $(VARDB); \ - do \ - foo=""; \ - for bar in `echo $(DESTDIR)$${dir} |tr / ' '`; do \ - foo=$${foo}/$$bar; \ - if [ ! -d $$foo ]; then \ - mkdir $$foo; \ - chmod 755 $$foo; \ - fi; \ - done; \ - done - $(INSTALL) dhclient $(DESTDIR)$(CLIENTBINDIR) - $(CHMOD) 755 $(DESTDIR)$(CLIENTBINDIR)/dhclient - if [ x$(SCRIPT) = xnone ]; then \ - echo "No client script available."; \ - else \ - $(INSTALL) scripts/$(SCRIPT) $(DESTDIR)$(ETC)/dhclient-script; \ - $(CHMOD) 700 $(DESTDIR)$(ETC)/dhclient-script; \ - fi - $(MANINSTALL) $(MANFROM) dhclient.$(MANCAT)8 $(MANTO) \ - $(DESTDIR)$(ADMMANDIR)/dhclient$(ADMMANEXT) - $(MANINSTALL) $(MANFROM) dhclient-script.$(MANCAT)8 $(MANTO) \ - $(DESTDIR)$(ADMMANDIR)/dhclient-script$(ADMMANEXT) - $(MANINSTALL) $(MANFROM) dhclient.conf.$(MANCAT)5 $(MANTO) \ - $(DESTDIR)$(FFMANDIR)/dhclient.conf$(FFMANEXT) - $(MANINSTALL) $(MANFROM) dhclient.leases.$(MANCAT)5 $(MANTO) \ - $(DESTDIR)$(FFMANDIR)/dhclient.leases$(FFMANEXT) - -clean: - -rm -f $(OBJS) - -realclean: clean - -rm -f $(PROG) $(CATMANPAGES) $(SEDMANPAGES) *~ #* - -distclean: realclean - -rm -f Makefile - -# These should only be done on 4.4 BSD-based systems, since the mandoc -# macros aren't available on older unices. Catted man pages are -# provided in the distribution so that this doesn't become a problem. - -dhclient.cat8: dhclient.man8 - nroff -man dhclient.man8 >dhclient.cat8 - -dhclient.man8: dhclient.8 - sed -e "s#ETCDIR#$(ETC)#g" -e "s#DBDIR#$(VARDB)#g" \ - -e "s#RUNDIR#$(VARRUN)#g" < dhclient.8 >dhclient.man8 - -dhclient-script.cat8: dhclient-script.man8 - nroff -man dhclient-script.man8 >dhclient-script.cat8 - -dhclient-script.man8: dhclient-script.8 - sed -e "s#ETCDIR#$(ETC)#g" -e "s#DBDIR#$(VARDB)#g" \ - -e "s#RUNDIR#$(VARRUN)#g" < dhclient-script.8 \ - >dhclient-script.man8 - -dhclient.conf.man5: dhclient.conf.5 - sed -e "s#ETCDIR#$(ETC)#g" -e "s#DBDIR#$(VARDB)#g" \ - -e "s#RUNDIR#$(VARRUN)#g" < dhclient.conf.5 \ - >dhclient.conf.man5 - -dhclient.conf.cat5: dhclient.conf.man5 - nroff -man dhclient.conf.man5 >dhclient.conf.cat5 - -dhclient.leases.man5: dhclient.leases.5 - sed -e "s#ETCDIR#$(ETC)#g" -e "s#DBDIR#$(VARDB)#g" \ - -e "s#RUNDIR#$(VARRUN)#g" < dhclient.leases.5 \ - >dhclient.leases.man5 - -dhclient.leases.cat5: dhclient.leases.man5 - nroff -man dhclient.leases.man5 >dhclient.leases.cat5 - -dhclient: $(OBJS) $(DHCPLIB) - $(CC) $(LFLAGS) -o $(PROG) $(OBJS) $(DHCPLIB) $(LIBS) - -# Dependencies (semi-automatically-generated) - -dhclient.o: dhclient.c ../includes/dhcpd.h \ - ../includes/cdefs.h ../includes/osdep.h ../includes/site.h \ - ../includes/cf/netbsd.h ../includes/dhcp.h \ - ../includes/tree.h ../includes/hash.h ../includes/inet.h \ - ../includes/sysconf.h ../includes/version.h -clparse.o: clparse.c ../includes/dhcpd.h \ - ../includes/cdefs.h ../includes/osdep.h ../includes/site.h \ - ../includes/cf/netbsd.h ../includes/dhcp.h \ - ../includes/tree.h ../includes/hash.h ../includes/inet.h \ - ../includes/sysconf.h ../includes/dhctoken.h |