diff options
Diffstat (limited to 'contrib/libpam/Makefile')
| -rw-r--r-- | contrib/libpam/Makefile | 328 |
1 files changed, 62 insertions, 266 deletions
diff --git a/contrib/libpam/Makefile b/contrib/libpam/Makefile index d25f58bb570ec..ad2eea2edc293 100644 --- a/contrib/libpam/Makefile +++ b/contrib/libpam/Makefile @@ -1,282 +1,78 @@ ## -## $Id: Makefile,v 1.31 1997/04/05 07:04:25 morgan Exp morgan $ +## $Id: Makefile,v 1.5 2001/01/20 22:29:47 agmorgan Exp $ ## -## $Log: Makefile,v $ -## -## - -# major and minor numbers of this release -MAJOR_REL=0 -MINOR_REL=65 -DEBUG_REL=no -#DEBUG_REL=yes - -# this should be the name of this directory -RELNAME = Linux-PAM-$(MAJOR_REL).$(MINOR_REL) - -# this is the name of the archive file -DISTFILE = $(RELNAME).tar.gz - -# define this to indicate to subdirectories that they are part of the -# full source tree. -FULL_LINUX_PAM_SOURCE_TREE=yes -export FULL_LINUX_PAM_SOURCE_TREE - -DYNLOAD="dl" -DYNTYPE="so" - -# Comment out either line to disable that type of linking for *modules only* -# Both at once is a legal configuration! -DYNAMIC=-DPAM_DYNAMIC -#STATIC=-DPAM_STATIC - -# Comment out these lines to disable building dynamic/static libpam.* -DYNAMIC_LIBPAM=yes -#STATIC_LIBPAM=yes - -# All combinations of the above four variable definitions are legal, -# however, not defining either dynamic or static modules and yet -# creating a some flavor of LIBPAM will make an authentication library -# that always fails! - -# Here we indicate which libraries are present on the local system -# they control the building of some modules in this distribution -# Note, these definitions are all "export"ed below... - -HAVE_PWDBLIB=no -HAVE_CRACKLIB=no -HAVE_AFSLIBS=no -HAVE_KRBLIBS=no - -# NB. The following is the generic defines for compilation. -# They can be overridden in the default.defs file below -# -WARNINGS = -ansi -D_POSIX_SOURCE -Wall -Wwrite-strings \ - -Wpointer-arith -Wcast-qual -Wcast-align \ - -Wtraditional -Wstrict-prototypes -Wmissing-prototypes \ - -Wnested-externs -Winline -Wshadow -pedantic -PIC=-fPIC -# Mode to install shared libraries with -SHLIBMODE=644 +## Note, ideally I would prefer it if this top level makefile did +## not get created by autoconf. As I find typing 'make' and relying +## on it to take care of all dependencies much more friendly than +## the multi-stage autoconf+make and also worry about updates to +## configure.in not getting propagated down the tree. (AGM) [I realise +## that this may not prove possible, but at least I tried.. Sigh.] -# -# Conditional defines.. -# +DISTNAME=Linux-PAM -ifdef DYNAMIC -# need the dynamic library functions -LIBDL=-l$(DYNLOAD) -ifdef STATIC_LIBPAM -# needed because pam_xxx() fn's are now in statically linked library -RDYNAMIC = -rdynamic +ifeq ($(shell test \! -f Make.Rules || echo yes),yes) + include Make.Rules endif -endif - -# Here we include the defines for the preferred operating system -# these include things like CC, CFLAGS and destination directories -# etc.. By default, this is a symbolic link to one of the .defs files -# the .../defs/ directory. Please take a moment to check that you are -# using the correct one. - -include default.defs - -# to turn on the fprintf(stderr, ..) debugging lines throughout the -# distribution uncomment this line -#EXTRAS += -DDEBUG - -# For serious memory allocation tracing uncomment the following -#MEMORY_DEBUG=-DMEMORY_DEBUG - -####################################################################### -# The pam_unix module in this file will not work on NIS based systems.# -####################################################################### - -# //////////////////////////////////////////////////// -# // You should not modify anything below this line // -# //////////////////////////////////////////////////// - -# the sub-directories to make things in - -DIRS = modules libpam conf libpam_misc examples - -# -# basic defines -# - -INCLUDEDIR=-I$(shell pwd)/include -PAMLIB=-L$(shell pwd)/libpam -PAMMISCLIB=-L$(shell pwd)/libpam_misc -ifeq ($(DEBUG_REL),yes) - PAMLIB += -lpamd - PAMMISCLIB += -lpamd_misc -else - PAMLIB += -lpam - PAMMISCLIB += -lpam_misc -endif - -# This is Linux-PAM and not a version from Sun etc.. -# [Note, this does not describe the operating system you are using -# only that you are compiling the "Linux" (read FREE) implementation -# of Pluggable Authentication Modules. -EXTRAS += -DLINUX_PAM +THINGSTOMAKE = modules libpam libpamc libpam_misc doc examples -# -# build composite defines -# +all: $(THINGSTOMAKE) -LOADLIBES = $(PAMLIB) $(RDYNAMIC) $(PAMMISCLIB) $(LIBDL) $(ULIBS) - -CFLAGS += $(EXTRAS) $(MEMORY_DEBUG) $(WARNINGS) $(INCLUDEDIR) $(PIC) -ifneq ($(strip $(OS)),) -CFLAGS += -D$(OS) -endif -ifneq ($(strip $(ARCH)),) -CFLAGS += -D$(ARCH) -endif - -# -# export the libraries-available info; the modules should know how -# to deal with this... -# -export HAVE_PWDBLIB -export HAVE_CRACKLIB -export HAVE_AFSLIBS -export HAVE_KRBLIBS - -# -# generic exports -# -export MAJOR_REL # the major release of this distribution -export MINOR_REL # the minor release of this distribution -export DEBUG_REL # for installing a debugging version of PAM -export OS # operating system -export ARCH # architecture -export CC # the C compiler -export INSTALL # to do instalations with -export MKDIR # to ensure directories exist -export CFLAGS # CC flags used to compile everything -export LD_D # build a shared object file (module) -export LD_L # build a shared library (e.g. libpam) -export USESONAME # does shlib link command require soname option -export SOSWITCH # shlib lib soname switch name -export NEEDSONAME # does shared library link need versioned lib -export LD # build a generic library -export LDCONFIG # rebuild the shared libraries -export AR # build a static library -export RANLIB # reorder a static library -export LOADLIBES # libraries needed for application linking -export PAMLIB # where to find the local libpam.xx file -export DYNTYPE # which suffix is used for libraries -export SHLIBMODE # file mode for shared objects -# -# where to install things -# -export FAKEROOT # for package maintainers -# -export PREFIX # basic prefix for all other directories -export SUPLEMENTED # where to store module helper binaries -export LIBDIR # where libpam and libpam_misc go -export SECUREDIR # where the modules will be placed -export INCLUDED # where to store pam---.h files -export CONFIGED # where pam.conf and pam.d/ go -export SCONFIGED # where modules' config files go - -# -# Conditional exporting ( ... these go on for a while... ) -# -ifdef DYNAMIC -export DYNAMIC -endif -ifdef STATIC -export STATIC -endif -ifdef DYNAMIC_LIBPAM -export DYNAMIC_LIBPAM -endif -ifdef STATIC_LIBPAM -export STATIC_LIBPAM -endif -ifdef MEMORY_DEBUG -export MEMORY_DEBUG -endif - -## -## the rules -## - -all: .freezemake - @for i in $(DIRS) ; do \ - $(MAKE) -C $$i all ; \ - if [ $$? -ne 0 ]; then break ; fi ; \ - done - -.freezemake: -# Do nothing - -.old_freezemake: Makefile - @touch .freezemake - @echo "*WARNING*: If you are running a system that is dependent" - @echo " on PAM to work. DO NOT make sterile NOR make remove." - @echo " These options will delete the PAM files on your system" - @echo " and make it unusable!" - @echo "" - @echo "If you are in any doubt, just do 'make all' (or just" - @echo "'make'). It is likely that this is the SAFEST thing to do...." - @exit 1 - -install: - @for i in $(DIRS) ; do \ - $(MAKE) -C $$i install ; \ - if [ $$? -ne 0 ]; then break ; fi ; \ - done - install ./doc/man/*.3 $(PREFIX)/man/man3/ - install ./doc/man/*.8 $(PREFIX)/man/man8/ - -sterile: .freezemake - @$(MAKE) remove - @$(MAKE) extraclean - -remove: .freezemake - @for i in $(DIRS) ; do \ - $(MAKE) -C $$i remove ; \ - done +prep: + rm -f security + ln -sf . security clean: - @rm -f *~ core - @for i in $(DIRS) ; do \ - $(MAKE) -C $$i clean ; \ - done - -extraclean: - @for i in $(DIRS) doc; do \ - $(MAKE) -C $$i extraclean ; \ - done - -check: - @$(MAKE) -C conf check + if [ ! -f Make.Rules ]; then touch Make.Rules ; fi + for i in $(THINGSTOMAKE) ; do $(MAKE) -C $$i clean ; done + rm -f security *~ *.orig *.rej Make.Rules #*# + +distclean: clean + rm -f Make.Rules _pam_aconf.h + rm -f config.status config.cache config.log core + +maintainer-clean: distclean + @echo files should be ok for packaging now. + +# NB _pam_aconf.h.in changes will remake this too +Make.Rules: configure Make.Rules.in _pam_aconf.h.in + @echo XXX - not sure how to preserve past configure options.. + @echo XXX - so not attempting to. Feel free to run ./configure + @echo XXX - by hand, with the options you want. + ./configure + +_pam_aconf.h: Make.Rules + +configure: configure.in + @echo + @echo You do not appear to have an up-to-date ./configure file. + @echo Please run autoconf, and then ./configure [..options..] + @echo + @rm -f configure + @exit 1 -RCScheck: - @$(MAKE) -C conf RCScheck +$(THINGSTOMAKE): _pam_aconf.h prep + $(MAKE) -C $@ all -# this can be used to see what hasn't been check'd into RCS +install: _pam_aconf.h prep + $(MKDIR) $(FAKEROOT)$(INCLUDED) + $(INSTALL) -m 444 security/_pam_aconf.h $(FAKEROOT)$(INCLUDED) + for x in $(THINGSTOMAKE) ; do make -C $$x install ; done -open: - @find . \( -type f -a -perm 644 \) -print +remove: + rm -f $(FAKEROOT)$(INCLUDED)/_pam_aconf.h + for x in $(THINGSTOMAKE) ; do make -C $$x remove ; done release: - @egrep '^DEBUG\_REL\=yes' Makefile|grep -v grep > /dev/null ;\ - if [ $$? -eq 0 ]; then \ - echo "You should first set DEBUG_REL to no" ; exit 1 ; fi - $(MAKE) extraclean - rm -f .freezemake - touch .filelist .RCSlist - chmod 600 .filelist .RCSlist - cd .. ; find $(RELNAME) \! -type d -print | fgrep -v RCS | fgrep -v 'conf/.md5sum' > $(RELNAME)/.filelist - cd .. ; find $(RELNAME) -type f -print | fgrep RCS | fgrep -v 'conf/.RCSsum' > $(RELNAME)/.RCSlist - chmod 400 .filelist .RCSlist - $(MAKE) check - $(MAKE) RCScheck - (cat .filelist ; echo $(RELNAME)/conf/.md5sum) | (cd .. ; tar -cz -f$(DISTFILE) -T-) - (cat .RCSlist ; echo $(RELNAME)/conf/.RCSsum) | (cd .. ; tar -cz -fRCS+$(DISTFILE) -T-) + @if [ ! -f Make.Rules ]; then echo make Make.Rules first ; exit 1; fi + @if [ ! -L ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) ]; then \ + echo generating ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) link ; \ + ln -sf $(DISTNAME) ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) ; \ + echo to ../$(DISTNAME) . ; fi + @diff ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)/Make.Rules Make.Rules + make distclean + cd .. ; tar zvfc $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL).tar.gz \ + --exclude CVS --exclude .cvsignore --exclude '.#*' \ + $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)/* + |